Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “material defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Local vibrational modes competitions in Mn-doped ZnO epitaxial films with tunable ferromagnetism

We reported spectroscopic investigations of high quality Mn-doped ZnO (ZnMnO) films grown by oxygen plasma-assisted molecular beam epitaxy. Raman scattering spectra revealed two local vibrational modes (LVMs) associated with Mn dopants at 523 and 712 cm{sup −1}. The LVMs and magnetic properties of ZnMnO films can be synchronously modulated by post annealing processing or by introducing tiny Co. The relative intensity of two LVMs clearly shows competitions arising from uncompensated acceptor and donor defects competition for ferromagnetic and nonmagnetic films. The experimental results indicated that LVM at 523 cm{sup −1} is attributed to Mn—(Zinc-vacancy) complexes, while LVM at 712 cm{sup −1} is attributed to Mn—(Oxygen-vacancy) complexes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Antisites in III-V semiconductors: Density functional theory calculations

Density functional based simulation, corrected for finite size effects, is used to investigate systematically the formation of antisite defects in III-V semiconductors (III = Al, Ga, and In and V = P, As, and Sb). Different charge states are modelled as a function of the Fermi level and under different growth conditions. The formation energies of group III antisites (III{sub V}{sup q}) decrease with increasing covalent radius of the group V atom though not group III radius, whereas group V antisites (V{sub III}{sup q}) show a consistent decrease in formation energies with increase in group III and group V covalent radii. In general, III{sub V}{sup q} defects dominate under III-rich conditions and V{sub III}{sup q} under V-rich conditions. Comparison with equivalent vacancy formation energy simulations shows that while antisite concentrations are always dominant under stoichiometric conditions, modest variation in growth or doping conditions can lead to a significantly higher concentration of vacancies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Kinetic model for electric-field induced point defect redistribution near semiconductor surfaces

The spatial distribution of point defects near semiconductor surfaces affects the efficiency of devices. Near-surface band bending generates electric fields that influence the spatial redistribution of charged mobile defects that exchange infrequently with the lattice, as recently demonstrated for pile-up of isotopic oxygen near rutile TiO{sub 2} (110). The present work derives a mathematical model to describe such redistribution and establishes its temporal dependence on defect injection rate and band bending. The model shows that band bending of only a few meV induces significant redistribution, and that the direction of the electric field governs formation of either a valley or a pile-up.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Near surface inversion layer recombination in Al{sub 2}O{sub 3} passivated n-type silicon

On n-type silicon, negatively charged surface passivation layers create a near surface recombination channel, which could significantly reduce the effective carrier lifetime at low injection levels (Δn < 10{sup 14 }cm{sup −3}). This effect is described by Shockley Read Hall recombination at homogeneously distributed defects in the silicon wafer. In the near surface region, fixed charges in the dielectric layer significantly change the carrier concentrations and the recombination rate of defects. Sentaurus device simulations show that the contribution of the near surface recombination to the effective carrier lifetime depends on the properties of the involved defects. The lifetime reduction is strongest when the involved defects have an energy level in the lower half of the band gap and a very high electron to hole capture cross section ratio. For the simulation, a very low defect density in the order of 10{sup 8 }cm{sup −3} is assumed, which is a realistic value in highly pure float zone silicon. Quasi-steady state photoconductance measurements on n-type silicon with Al{sub 2}O{sub 3} passivation are done and fitted with the recombination model. Very good correlation between simulation and experiment is achieved when the involved recombination centers have an electron to hole capture cross section ratio of 10{sup 7} and an energy level of −0.2 eV w.r.t. the intrinsic level. The simulated defect properties are discussed in respect of transition metal and doping related defects reported in literature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Non-contact, non-destructive, quantitative probing of interfacial trap sites for charge carrier transport at semiconductor-insulator boundary

The density of traps at semiconductor–insulator interfaces was successfully estimated using microwave dielectric loss spectroscopy with model thin-film organic field-effect transistors. The non-contact, non-destructive analysis technique is referred to as field-induced time-resolved microwave conductivity (FI-TRMC) at interfaces. Kinetic traces of FI-TRMC transients clearly distinguished the mobile charge carriers at the interfaces from the immobile charges trapped at defects, allowing both the mobility of charge carriers and the number density of trap sites to be determined at the semiconductor-insulator interfaces. The number density of defects at the interface between evaporated pentacene on a poly(methylmethacrylate) insulating layer was determined to be 10{sup 12 }cm{sup −2}, and the hole mobility was up to 6.5 cm{sup 2} V{sup −1} s{sup −1} after filling the defects with trapped carriers. The FI-TRMC at interfaces technique has the potential to provide rapid screening for the assessment of interfacial electronic states in a variety of semiconductor devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, optical, and electrical properties of strained La-doped SrTiO{sub 3} films

The structural, optical, and room-temperature electrical properties of strained La-doped SrTiO{sub 3} epitaxial thin films are investigated. Conductive La-doped SrTiO{sub 3} thin films with concentration varying from 5 to 25% are grown by molecular beam epitaxy on four different substrates: LaAlO{sub 3}, (LaAlO{sub 3}){sub 0.3}(Sr{sub 2}AlTaO{sub 6}){sub 0.7}, SrTiO{sub 3}, and DyScO{sub 3}, which result in lattice mismatch strain ranging from −2.9% to +1.1%. We compare the effect of La concentration and strain on the structural and optical properties, and measure their effect on the electrical resistivity and mobility at room temperature. Room temperature resistivities ranging from ∼10{sup −2} to 10{sup −5} Ω cm are obtained depending on strain and La concentration. The room temperature mobility decreases with increasing strain regardless of the sign of the strain. The observed Drude peak and Burstein-Moss shift from spectroscopic ellipsometry clearly confirm that the La addition creates a high density of free carriers in SrTiO{sub 3}. First principles calculations were performed to help understand the effect of La-doping on the density of states effective mass as well as the conductivity and DC relaxation time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low-voltage and hysteresis-free organic thin-film transistors employing solution-processed hybrid bilayer gate dielectrics

This study presents a promising approach to realize low-voltage (<3 V) organic thin-film transistors (OTFTs) exhibiting improved electrical and optical stability. Such device performance results from the use of solution-processed hybrid bilayer gate dielectrics consisting of zirconium dioxide (high-k dielectric) and amorphous fluoropolymer, CYTOP{sup ®} (low-k dielectric). Employing a very thin amorphous fluoropolymer film reduces interfacial defect-states by repelling water molecules and other aqueous chemicals from an organic semiconductor active layer due to the hydrophobic surface-property. The chemically clean interface, stemming from decrease in density of trap states improves all the key device properties such as field-effect mobility, threshold voltage, and sub-threshold swing. Furthermore, degradation by electrical bias-stress and photo-induced hysteresis were suppressed in OTFTs employing hybrid bilayer gate dielectrics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Valence and conduction band offsets at low-k a-SiO{sub x}C{sub y}:H/a-SiC{sub x}N{sub y}:H interfaces

In order to understand the fundamental electrical leakage and reliability failure mechanisms in nano-electronic low-k dielectric/metal interconnect structures, we have utilized x-ray photoelectron spectroscopy and reflection electron energy loss spectroscopy to determine the valence and conduction band offsets present at interfaces between non-porous and porous low-k a-SiO{sub x}C{sub y}:H interlayer dielectrics and a-SiC{sub x}N{sub y}:H metal capping layers. The valence band offset for such interfaces was determined to be 2.7±0.2 eV and weakly dependent on the a-SiOC:H porosity. The corresponding conduction band offset was determined to be 2.1±0.2 eV. The large band offsets indicate that intra metal layer leakage is likely dominated by defects and trap states in the a-SiOC:H and a-SiCN:H dielectrics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiphoton photoluminescence contrast in switched Mg:LiNbO{sub 3} and Mg:LiTaO{sub 3} single crystals

We observed a multiphoton luminescence contrast between virgin and single-switched domains in Mg-doped LiNbO{sub 3} (LNO) and LiTaO{sub 3} (LTO) single crystals with different doping levels of 0–7 mol. % and 0–8 mol. %, respectively. A luminescence contrast in the range of 3% was measured between as-grown and electrically inverted domain areas in Mg:LNO samples, while the contrast reaches values of up to 30% for the Mg:LTO case. Under annealing, an exponential decay of the domain contrast was observed. The activation energy of about 1 eV being determined for the decay allowed a comparison with reported activation energies of associated defects, clearly illustrating a strong connection between thermal contrast decay and the H{sup +} and Li{sup +}-ion mobility. Finally, performing similar experiments on oxidized samples undoubtedly demonstrated that the origin of the reported luminescence contrast is strongly connected with lithium ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Potential variations around grain boundaries in impurity-doped BaSi₂ epitaxial films evaluated by Kelvin probe force microscopy

Potential variations around the grain boundaries (GBs) in antimony (Sb)-doped n-type and boron (B)-doped p-type BaSi₂ epitaxial films on Si(111) were evaluated by Kelvin probe force microscopy. Sb-doped n-BaSi₂ films exhibited positively charged GBs with a downward band bending at the GBs. The average barrier height for holes was approximately 10 meV for an electron concentration n ≈ 10¹⁷ cm⁻³. This downward band bending changed to upward band bending when n was increased to n = 1.8 × 10¹⁸cm⁻³. In the B-doped p-BaSi₂ films, the upward band bending was observed for a hole concentration p ≈ 10¹⁸cm⁻³. The average barrier height for electrons decreased from approximately 25 to 15 meV when p was increased from p = 2.7 × 10¹⁸ to p = 4.0 × 10¹⁸ cm⁻³. These results are explained under the assumption that the position of the Fermi level E{sub f} at GBs depends on the degree of occupancy of defect states at the GBs, while E{sub f} approached the bottom of the conduction band or the top of the valence band in the BaSi₂ grain interiors with increasing impurity concentrations. In both cases, such small barrier heights may not deteriorate the carrier transport properties. The electronic structures of impurity-doped BaSi₂ are also discussed using first-principles pseudopotential method to discuss the insertion sites of impurity atoms and clarify the reason for the observed n-type conduction in the Sb-doped BaSi₂ and p-type conduction in the B-doped BaSi₂.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure and thermoelectric properties of p-type Ag-doped Mg₂Sn and Mg₂Sn{sub 1-x}Si{sub x} (x=0.05, 0.1)

An experimental and theoretical study of p-type Ag-doped Mg₂Sn and Mg₂Sn{sub 1-x}Si{sub x} (x=0.05, 0.1) is presented. Band structure calculations show that behavior of Ag in Mg₂Sn depends on the site it occupies. Based on Bloch spectral functions and density of states calculations, we show that if Ag substitutes for Sn, it is likely to form a resonant level; if it substitutes for Mg, a rigid-band-like behavior is observed. In both cases, the doped system should exhibit p-type conductivity. Experimentally, thermoelectric, thermomagnetic, and galvanomagnetic properties are investigated of p-type Mg₂Sn{sub 1–x}Si{sub x} (x=0, 0.05, 0.1) samples synthesized by a co-melting method in sealed crucibles. Ag effectively dopes the samples p-type, and thermoelectric power factors in excess of 20μW cm⁻¹K⁻² are observed in optimally doped samples. From the measured Seebeck coefficient, Nernst coefficient, and mobility, we find that the combination of acoustic phonon scattering, optical phonon scattering and defect scattering results in an energy-independent scattering rate. No resonant-like increase in thermopower is observed, which correlates well with electronic structure calculations assuming the location of Ag on Mg site.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Imaging space charge regions in Sm-doped ceria using electrochemical strain microscopy

Nanocrystalline ceria exhibits a total conductivity several orders of magnitude higher than microcrystalline ceria in air at high temperature. The most widely accepted theory for this enhancement (based on fitting of conductivity data to various transport and kinetic models) is that relatively immobile positively charged defects and/or impurities accumulate at the grain boundary core, leading to a counterbalancing increase in the number of mobile electrons (small polarons) within a diffuse space charge region adjacent to each grain boundary. In an effort to validate this model, we have applied electrochemical strain microscopy to image the location and relative population of mobile electrons near grain boundaries in polycrystalline Sm-doped ceria in air at 20–200 °C. Our results show the first direct (spatially resolved) evidence that such a diffuse space charge region does exist in ceria, and is localized to both grain boundaries and the gas-exposed surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Temperature-sensitive junction transformations for mid-wavelength HgCdTe photovoltaic infrared detector arrays by laser beam induced current microscope

In this paper, we report on the disappearance of the photosensitive area extension effect and the unusual temperature dependence of junction transformation for mid-wavelength, n-on-p HgCdTe photovoltaic infrared detector arrays. The n-type region is formed by B{sup +} ion implantation on Hg-vacancy-doped p-type HgCdTe. Junction transformations under different temperatures are visually captured by a laser beam induced current microscope. A physical model of temperature dependence on junction transformation is proposed and demonstrated by using numerical simulations. It is shown that Hg-interstitial diffusion and temperature activated defects jointly lead to the p-n junction transformation dependence on temperature, and the weaker mixed conduction compared with long-wavelength HgCdTe photodiode contributes to the disappearance of the photosensitive area extension effect in mid-wavelength HgCdTe infrared detector arrays.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Local geometric and electronic structures and origin of magnetism in Co-doped BaTiO{sub 3} multiferroics

We have prepared polycrystalline samples BaTi{sub 1−x}Co{sub x}O{sub 3} (x = 0–0.1) by solid-state reaction. X-ray diffraction and Raman-scattering studies reveal the phase separation in crystal structure as changing Co-doping content (x). The samples with x = 0–0.01 are single phase in a tetragonal structure. At higher doping contents (x > 0.01), there is the formation and development of a secondary hexagonal phase. Magnetization measurements at room temperature indicate a coexistence of paramagnetic and weak-ferromagnetic behaviors in BaTi{sub 1−x}Co{sub x}O{sub 3} samples with x > 0, while pure BaTiO{sub 3} is diamagnetic. Both these properties increase with increasing x. Analyses of X-ray absorption spectra recorded from BaTi{sub 1−x}Co{sub x}O{sub 3} for the Co and Ti K-edges indicate the presence of Co{sup 2+} and Co{sup 3+} ions. They locate in the Ti{sup 4+} site of the tetragonal and hexagonal BaTiO{sub 3} structures. Particularly, there is a shift of oxidation state from Co{sup 2+} to Co{sup 3+} when Co-doping content increases. We believe that the paramagnetic nature in BaTi{sub 1−x}Co{sub x}O{sub 3} samples is due to isolated Co{sup 2+} and Co{sup 3+} centers. The addition of Co{sup 3+} ions enhances the paramagnetic behavior. Meanwhile, the origin of ferromagnetism is due to lattice defects, which is less influenced by the changes caused by the variation in concentration of Co{sup 2+} and Co{sup 3+} ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Active investigation of material damage under load using micro-CT

Due the growth of composite materials across multiple industries such as Aviation, Wind there is an increasing need to not just standardize and improve manufacturing processes but also to design these materials for the specific applications. One of the things that this translates to is understanding how failure initiates and grows in these materials and at what loads, especially around internal flaws such as voids or features such as ply drops. Traditional methods of investigating internal damage such as CT lack the resolution to resolve ply level damage in composites. Interrupted testing with layer removal can be used to investigate internal damage using microscopy; however this is a destructive method. Advanced techniques such as such as DIC are useful for in-situ damage detection, however are limited to surface information and would not enable interrogating the volume. Computed tomography has become a state of the art technique for metrology and complete volumetric investigation especially for metallic components. However, its application to the composite world is still nascent. This paper demonstrates micro-CT’s capability as a gauge to quantitatively estimate the extent of damage and understand the propagation of damage in PMC composites while the component is under stress.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fast and low-dose computed laminography using compressive sensing based technique

Computed laminography (CL) is well known for inspecting microstructures in the materials, weldments and soldering defects in high density packed components or multilayer printed circuit boards. The overload problem on x-ray tube and gross failure of the radio-sensitive electronics devices during a scan are among important issues in CL which needs to be addressed. The sparse-view CL can be one of the viable option to overcome such issues. In this work a numerical aluminum welding phantom was simulated to collect sparsely sampled projection data at only 40 views using a conventional CL scanning scheme i.e. oblique scan. A compressive-sensing inspired total-variation (TV) minimization algorithm was utilized to reconstruct the images. It is found that the images reconstructed using sparse view data are visually comparable with the images reconstructed using full scan data set i.e. at 360 views on regular interval. We have quantitatively confirmed that tiny structures such as copper and tungsten slags, and copper flakes in the reconstructed images from sparsely sampled data are comparable with the corresponding structure present in the fully sampled data case. A blurring effect can be seen near the edges of few pores at the bottom of the reconstructed images from sparsely sampled data, despite the overall image quality is reasonable for fast and low-dose NDT.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strong photoluminescence of the porous silicon with HfO{sub 2}-filled microcavities

Greatly enhanced blue emission was observed at room temperature in the single-crystal silicon with HfO{sub 2} filled into its microcavities. The broad blue band light was emitted from both the HfO{sub 2} dielectric and the porous Si. The ferroelectricity of HfO{sub 2} enhances the blue emission from Si by its filling into the microcaivities. At the same time, HfO{sub 2} contributes to the light emission for the transitions of the defect levels for oxygen vacancy. The observation of greatly enhanced blue light emission of the porous Si filled with HfO{sub 2} dielectric is remarkable as both HfO{sub 2} and Si are highly compatible with Si-based electronic industry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Origin of the visible emission of black silicon microstructures

Silicon, the mainstay semiconductor in microelectronics, is considered unsuitable for optoelectronic applications due to its indirect electronic band gap that limits its efficiency as light emitter. Here, we univocally determine at the nanoscale the origin of visible emission in microstructured black silicon by cathodoluminescence spectroscopy and imaging. We demonstrate the formation of amorphous silicon oxide microstructures with a white emission. The white emission is composed by four features peaking at 1.98 eV, 2.24 eV, 2.77 eV, and 3.05 eV. The origin of such emissions is related to SiO{sub x} intrinsic point defects and to the sulfur doping due to the laser processing. Similar results go in the direction of developing optoelectronic devices suitable for silicon-based circuitry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Refine your search to explore more results.