Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “junctions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Probing Photoelectrochemical Hydrogen and Oxygen Evolution at Individual Al:SrTiO 3 /Rh 2–y Cr y O 3 Photocatalyst Particles

Particle-based photocatalysts for overall water splitting convert solar energy into hydrogen fuel without the use of any photovoltaic devices. As such they have the potential to revolutionize renewable energy production on Earth. While proven efficiencies have reached 1.1%, further improvements of photocatalyst technology depend on a better understanding of energy loss mechanisms on the individual particle level. Here, we conduct the first in operando photoelectrochemical measurements on individual micrometer-sized Al-doped SrTiO 3 /Rh 2–y CryO 3 photocatalyst particles. We find that the photocatalyst particles behave mainly as water oxidation photoanodes reaching up to 0.5 mA cm −2 at 0.8 V versus RHE and a photovoltage of ∼1.00 V under 4.7 mW cm −2 ultraviolet illumination. This proves that charge separation in the unbiased Al:SrTiO 3 /Rh 2–y Cr y O 3 catalyst is driven by a junction at the n-semiconductor-liquid contact. While O 2 is detected symmetrically around photocatalyst particles, uneven H 2 evolution profiles reflect an irregular Rh 2–y Cr y O 3 cocatalyst distribution. Additionally, the H 2 evolution activity varies significantly between different photocatalyst particles. Furthermore, this suggests that performance gains are possible by better controlling catalyst composition on the microscale.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Two Artificial Leaf Architectures for Solar Formate Production From CO 2 and H 2 O

Sunlight-powered artificial leaves for the production of formate from CO 2 are an attractive route to solar fuels, yet existing solar formate devices remain low in performance, and their architecture and material choices are underexplored. Herein, we report the fabrication of two distinct fully integrated, self-standing solar formate device architectures and elucidate the underlying design principles and material selection strategies. The first architecture integrates a Si photocathode with a BiVO 4 photoanode and utilizes a highly active Pd catalyst for CO 2 reduction. It represents the first artificial leaf device comprising two photoelectrodes (excluding photovoltaic [PV]-biased electrodes) for effective formate production under single-beam illumination. The second architecture employs a dark cathode and a dark anode driven by a 4-junction perovskite solar cell and uses a highly stable Bi catalyst for CO 2 reduction. This device delivers a record-high formate production rate of 174 µmol h −1 with a remarkable solar-to-formate energy efficiency of 2% among all artificial leaf devices reported to date. Finally, these results demonstrate the feasibility and outline the design principles of both PV-free and PV-assisted device architectures in solar fuel production.

electrocatalysis↗
DOE OSTI2025

Aromatic Amide Foldamers Show Conformation‐Dependent Electronic Properties

Electron transport in organic molecules and biomolecules is governed by electronic structure and molecular conformations. Despite recent progress, key challenges remain in understanding the role of intramolecular interactions and three-dimensional (3D) conformations on the electron transport behavior of organic molecules. In this work, the electronic properties of aromatic amide foldamers are characterized that organize into distinct 3D structures, including an extended secondary amide that adopts a trans-conformation and a folded N-methylated tertiary amide that adopts a cis-conformation. Results from single-molecule electronic experiments show that the extended secondary amide exhibits a fourfold enhancement in molecular conductance compared to the folded N-methylated tertiary amide, despite a longer contour length. The results show that extended amide molecules are governed by a through-bond electron transport mechanism, whereas folded amide molecules are dominated by through-space transport. Bulk spectroscopic characterization and density functional theory calculations further reveal that extended amides have a smaller HOMO–LUMO gap and larger transmission values compared to folded amides, consistent with single-molecule electronic experiments. Overall, this work shows that 3D molecular conformations significantly influence the electronic properties of single-molecule junctions.

electron transport↗
DOE OSTI2023

Pulsed Laser Annealed Ga Hyperdoped Poly‐Si / SiO x Passivating Contacts for High‐Efficiency Monocrystalline Si Solar Cells

Polycrystalline Si ( poly ‐Si)‐based passivating contacts are promising candidates for high‐efficiency crystalline Si solar cells. We show that nanosecond‐scale pulsed laser melting (PLM) is an industrially viable technique to fabricate such contacts with precisely controlled dopant concentration profiles that exceed the solid solubility limit. We demonstrate that conventionally doped, hole‐selective poly ‐Si/SiO x contacts that provide poor surface passivation of c ‐Si can be replaced with Ga‐ or B‐doped contacts based on non‐equilibrium doping. We overcome the solid solubility limit for both dopants in poly ‐Si by rapid cooling and recrystallization over a timescale of ∼25 ns. We show an active Ga dopant concentration of ∼3 × 10 20 cm −3 in poly ‐Si which is six times higher than its solubility limit in c ‐Si, and a B dopant concentration as high as ∼10 21 cm −3 . We measure an implied open‐circuit voltage of 735 mV for Ga‐doped poly ‐Si/SiO x contacts on Czochralski Si with a low contact resistivity of 35.5 ± 2.4 mΩ cm 2 . Scanning spreading resistance microscopy and Kelvin probe force microscopy show large diffusion and drift current in the p ‐ n junction that contributes to the low contact resistivity. Our results suggest that PLM can be extended for hyperdoping of other semiconductors with low solubility atoms to enable high‐efficiency devices.

14 SOLAR ENERGY↗
DOE OSTI2020

A comparative study on the physicochemical characteristics of nanoparticles released in vivo from CoCrMo tapers and cement–stem interfaces of total hip replacements

The good biocompatibility and corrosion resistance of the bulk CoCrMo alloy has resulted in it being used in the manufacture of implants and load bearing medical devices. These devices, however, can release wear and corrosion products which differ from the composition of the bulk CoCrMo alloy. The physicochemical characteristics of the particles and the associated in vivo reactivity are dictated by the wear mechanisms and electrochemical conditions at the sites of material loss. Debris released from CoCrMo hip bearings, taper junctions, or cement–stem interfaces can, therefore, have different chemical and morphological characteristics, which provide them with different in vivo toxicities. Here, we propose to assess and compare the characteristics of the particles released in vivo from CoCrMo tapers and cement–stem interfaces which have received less attention compared to debris originating from the hip bearings. The study uses state–of–art characterization techniques to provide a detailed understanding of the size, morphology, composition, and chemistry of the particles liberated from the wear and corrosion flakes from revised hip replacements, with an enzymatic treatment. The phase analyses identified Cr 2 O 3 nanoparticles released from tapers and cement–stem interfaces, whose composition did not vary with origin or particle morphology. The size distributions showed significantly smaller particles were released from the stems, compared to the particles originating from the corresponding tapers. Furthermore, the investigation demonstrates that the tribocorrosive processes occurring at the taper and stem interfaces both result in Cr 2 O 3 nanoparticle formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Broccoli seed extract rich in polysaccharides and glucoraphanin ameliorates DSS ‐induced colitis via intestinal barrier protection and gut microbiota modulation in mice

Abstract BACKGROUND Broccoli has received widespread attention because of its anti‐inflammatory and antioxidant effects. The present study aimed to explore the composition of broccoli seed extract (BSE) and its effect on colitis induced by dextran sulfate sodium (DSS). RESULTS BSE mainly comprises glucoraphanin and polysaccharides composed of arabinose, galactose, glucose and mannose. Animal experiments suggested that BSE intervention effectively reversed body weight loss, suppressed the levels of proinflammatory interleukin‐6, tumor necrosis factor‐α and interleukin‐1β, and elevated the levels of anti‐inflammatory interleukin‐10 and the activities of superoxide dismutase and glutathione in DSS‐induced colitis mice. According to histopathologic and immunohistochemical analysis of colon tissue, BSE intervention may repair the intestinal barrier by upregulating mRNA levels and the expression of tight junction proteins (claudin‐1, occludin and zonula occludens‐1). Gas chromatography–mass spectrometry (MS) analysis demonstrated that cecal short‐chain fatty acids in mice with BSE administration were significantly increased compared with the model group. Sulforaphane and sulforaphane‐ N ‐acetylcysteine were only detected in BSE group mice by ultra‐performance liquid chromatography‐MS analysis. In addition, BSE intervention evidently increased the abundance of Alistipeds , Coriobacteriaceae UCG‐002 and Bifidobacterium and decreased the abundance of Escheichia‐Shinella , Lachnospiraceae others , Parabacteroides , Ruminococcaceae others and Turicibacter , which possibly promoted carbohydrate metabolism and short‐chain fatty acid production. CONCLUSION The present study aimed to elucidate the effect of BSE on colitis and found that BSE, as a novel food ingredient, has great potential for the improvement of colitis. © 2022 Society of Chemical Industry.

Wu, Jiaying↗
DOE OSTI2021

Effect of hydration on morphology of thin phosphonate block copolymer electrolyte membranes studied by electron tomography

The morphological changes of phosphonate polypeptoid electrolyte membranes, poly-N-(2-ethyl)hexylglycine-block-poly-N-phosphonomethylglycine (pNeh m -b-pNpm n ), in hydrated and dry states were characterized by cryogenic transmission electron microscopy (cryo-TEM) and cryogenic electron tomography (cryo-ET). The analysis of 3D tomograms revealed that the pNeh 9 -b-pNpm 9 thin films absorbed a large amount of water, resulting in the formation of membranes that were nearly flat and giant multicompartment vesicles dispersed in the water phase. A simple lamellar phase appeared when the films were dried. In contrast, pNeh 18 -b-pNpm 18 thin films absorbed little water and formed small highly curved unilamellar and multilamellar vesicles. Water was located mainly outside the closely-packed vesicles. When water was removed by drying, the walls of adjacent vesicles collapsed to form honeycomb-like capsules. Here, the changes in domain size reflected changes in chain conformations. The pNpm9 blocks were saturated by water and fully extended, while pNpm 18 blocks were neither saturated by water nor fully extended. In addition, the thicknesses of hydrophobic blocks in the hydrated films of both pNeh 9 -b-pNpm 9 and pNeh 18 -b-pNpm 18 were smaller than those in the dry films, reflecting an increase of the average distance between the neighboring junctions of polypeptoid molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2022

AlInP-passivated III–V solar cells grown by dynamic hydride vapor-phase epitaxy

We report the development of AlInP-passivated solar cells grown by dynamic hydride vapor-phase epitaxy (D-HVPE) with AM1.5G efficiencies of 26.0% for single-junction (1J) GaAs cells and 28.0% for GaInP/GaAs (2J) tandems. We compare the device performance of solar cells passivated with AlInP versus control cells passivated with GaInP, which has already enabled near-unity carrier collection in GaAs solar cells. 1J devices passivated with either AlInP or GaInP have an identical open-circuit voltage (V OC ) of 1.06 V and long-wavelength current collection near 95%, indicating that both window materials provide a similar degree of passivation. Adding AlInP passivation to each solar cell structure improves the current collection by 1.3 and 1 mA/cm 2 for the 1J and 2J, respectively. The AlInP also results in a top cell V OC boost of ~40 mV relative to a tandem device passivated only by a thin, highly doped GaInP emitter. Secondary-ion mass spectrometry measurements indicate that although O and Si both incorporate in the AlInP window, they do not appear in the subsequently grown absorber layers and do not impact its ability to passivate the front surface. We expect that these achievements, along with continued optimization, will enable parity of hydride vapor-phase epitaxy (HVPE)-grown device efficiencies with state-of-the-art devices grown by other epitaxial methods in the near future.

14 SOLAR ENERGY↗
DOE OSTI2026

Demonstration of GaAs-Based Photovoltaics on Acoustically Spalled Surfaces Grown by MOCVD

This study demonstrates the potential of sonic lift-off (SLO) technology for repeatable substrate reuse in gallium arsenide (GaAs)–based photovoltaics (PVs), offering a pathway toward cost effective production for terrestrial PV applications. Single-junction GaAs solar cells fabricated on acoustically spalled substrates achieved performance metrics comparable with those grown on standard commercial substrates, exhibiting short-circuit current densities (J sc ) of approximately 26.2–26.4 mA/cm 2 , open-circuit voltages (V oc ) around 1001 mV, fill factors (FFs) of 84%, and AM1.5G efficiencies near 22%. These results confirm that one reuse cycle can be realized without a performance penalty, offering a direct pathway to reducing substrate cost in fabrication. Furthermore, subsequent reuse of the substrates highlighted critical challenges, as devices fabricated from reused substrates showed significant degradation in performance (J sc of 15.5 mA/cm 2 , V oc of 748 mV, FF of 72%, and efficiency of 8%), primarily due to degradation of the epitaxial structure resulting from repeated spalling cycles.

Acoustic Spalling↗
DOE OSTI2026

Identifying Suitable Front Contacts for High‐Efficiency Cd(Se,Te) Solar Cells on Space‐Qualified Cover Glass

Deployment of photovoltaics in space requires devices that combine high-efficiency, low areal mass, and resilience to harsh environments. Historically, high-efficiency multijunction III–V materials have dominated space power systems; however, their high cost and limited manufacturing throughput motivate the exploration of scalable alternatives. While CdTe-based thin-film photovoltaics offer an attractive option, their performance on non-conventional substrates can suffer from front contact instability under higher-temperature processing. Here, the role of front contact chemistry in limiting cell performance is investigated using CdTe-based devices fabricated on 150 μm thick Ceria-doped space-qualified 0214 Corning glass. A matrix of four transparent conducting oxides (TCOs: CTO, AZO, ITO, IZO) combined with two n-type emitters (MZO, IGO) reveals chemical stability at the front interface—rather than absorber composition alone—governs recombination losses, voltage deficits, and device reproducibility. Chemically stable front contact combinations suppress elemental diffusion and interfacial degradation, resulting in significantly improved carrier lifetimes and junction quality. These insights are validated through record-certified Cd(Se,Te) cell efficiencies of 18.4% under AM1.5G and 16.2% under AM0 illumination on ultra-thin glass. Beyond CdTe, this work provides a general framework for the rational selection of TCO/emitter interfaces in superstrate thin-film photovoltaics, including emerging technologies like metal halide perovskites, while enabling high-efficiency, lightweight photovoltaics for space applications.

14 SOLAR ENERGY↗
DOE OSTI2025

Layers Can Be Deceiving: A Hopping Model for Small Molecule Diffusion in TATB Crystal

Sorption of small molecule gases in materials can play a significant role in their long‐term stability and compatibility within multi‐material assemblies. While many material properties of the insensitive high explosive TATB (1,3,5‐triamino‐2,4,6‐trinitrobenzene) are well understood, very little is known regarding its permeability to gases. TATB crystal exhibits a graphitic‐like layered packing structure that evokes a mental schema in which the layers form nanoscopic channels, but it is unclear whether this structure promotes gas transport. Here, we use molecular dynamics (MD) simulations to predict transport of small molecules through TATB single crystal. An approach to fit classical force fields is developed to model TATB interactions with H 2 O, He, Ne, and Ar, which is then combined with steered MD to probe gas transport along selected directions in the crystal. We find that small molecule transport occurs via a hopping mechanism that exhibits distinct jumps between interstitial sites and is substantially faster normal to the layers as compared to through them. This result stems from the finding that intralayer junctions between adjacent TATB molecules are the most stable interstitial sites and that energetic barriers are lower for hopping between adjacent layers. An empirical model for diffusion rate based on the MD data shows that the rate decays exponentially with increasing molecular radius and is negligibly small for all molecules larger than He, including common atmospheric gases. These findings have implications for the interpretation of experiments that measure surface area, material response to extreme conditions, and are expected to help constrain models for material aging.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Molybdenum Contacts to MoS 2 Field‐Effect Transistors: Schottky Barrier Extraction, Electrical Transport, and Low‐Frequency Noise

MoS 2 has great interest for nanoscale electronic devices, including transistors and sensors. Defect‐free structure, clean interface with the gate dielectric, and metals with suitable metal–semiconductor junctions are key for reliable devices. Molybdenum is shown as an excellent electrode for MoS 2 field‐effect transistors (FETs), but the correlation among device current, field‐effect mobility, and the low‐frequency noise (LFN) with number of atomic layers is not studied. Furthermore, the impact of Mo/MoS 2 Schottky barrier on electronic injection and scattering in the device needs to be understood. Herein, by studying the FETs with channels of different numbers of atomic‐layer thicknesses, it is shown that a molybdenum metal contact to MoS 2 provides reliable current injection with low Schottky barrier height, low contact resistance, low electron–phonon scattering, and negligible impurity scattering. The mobility and LFN are optimal at a channel thickness of ≈12 atomic layers, which is consistent with the “mobility maximum window” in MoS 2 transistors with prior studies using other contact metals.

Kwon, Jiseok↗
DOE OSTI2021

Absolute quantitation of propranolol from 200-μm regions of mouse brain and liver thin tissues using laser ablation-dropletProbe-mass spectrometry

Rationale: The ability to quantify drugs and metabolites in tissue with sub-mm resolution is a challenging but much needed capability in pharmaceutical research. To fill this void, a novel surface sampling approach combining laser ablation with the commercial dropletProbe automated liquid surface sampling system (LA-dropletProbe) was developed and presented here.Methods: Parylene C-coated 200 × 200 μm tissue regions of mouse brain and kidney thin tissue sections were analyzed for propranolol by laser ablation of tissue directly into a preformed liquid junction. Propranolol was detected by high performance liquid chromatography with positive ion mode electrospray ionization tandem mass spectrometry. Quantitation was achieved via application of a stable isotope-labeled internal standard and an external calibration curve.Results: Absolute concentration of propranolol determined from 200 × 200 µm tissue regions were compared to propranolol concentrations obtained from 2.3-mm-diameter tissue punches of adjacent, non-coated sections using standard bulk tissue extraction protocols followed by regular HPLC-MS/MS analysis. Average concentration of propranolol in both organs determined by the two employed methods agreed within ±12%. Furthermore, the relative abundance of phase II hydroxypropranolol glucuronide metabolites were recorded and found to be consistent with previous results.Conclusions: This work illustrates that depositing a thin parylene C layer onto thin tissue prior to analysis, which seals the surface and prevents direct liquid extraction of the drug from the tissue, coupled to the novel LA-dropletProbe surface sampling system is a viable approach for sub-mm resolution quantitative drug distribution analysis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Wide-Gap Perovskite via Synergetic Surface Passivation and Its Application toward Efficient Stacked Tandem Photovoltaics

Superior bandgap tunability enables solution-processed halide perovskite a promising candidate for multi-junction photovoltaics (PVs). Particularly, optically coupling wide-gap perovskite by stacking with commercially available PVs such as silicon and CIGS (also known as 4-terminal tandem) simplifies the technology transfer process, and further advances the commercialization potential of perovskite technology. However, compared with matured PV materials and the phase-pure FAPbI 3 , wide-gap perovskite still suffers from huge voltage deficits. Here, the authors take advantage of the synergetic effect behind a sequential fluoride and organic ammonium salt surface passivation strategy to control non-radiative energy losses, and obtained a 17.7% efficiency in infrared-transparent wide-gap perovskite solar cells (21.1% for opaque device), and achieved efficiencies of over 25% when stacked with commercial Si and CIGS products with original PCEs of 18–20% under a 4-terminal working condition.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Automated Experiments of Local Non–Linear Behavior in Ferroelectric Materials

An automated experiment in multimodal imaging to probe structural, chemical, and functional behaviors in complex materials and elucidate the dominant physical mechanisms that control device function is developed and implemented. Here, the emergence of non-linear electromechanical responses in piezoresponse force microscopy (PFM) is explored. Non-linear responses in PFM can originate from multiple mechanisms, including intrinsic material responses often controlled by domain structure, surface topography that affects the mechanical phenomena at the tip-surface junction, and the presence of surface contaminants. Using an automated experiment to probe the origins of non-linear behavior in ferroelectric lead titanate (PTO) and ferroelectric Al 0.93 B 0.07 N films, it is found that PTO shows asymmetric nonlinear behavior across a/c domain walls and a broadened high nonlinear response region around c/c domain walls. In contrast, for Al 0.93 B 0.07 N, well-poled regions show high linear piezoelectric responses, when paired with low non-linear responses regions that are multidomain show low linear responses and high nonlinear responses. It is shown that formulating dissimilar exploration strategies in deep kernel learning as alternative hypotheses allows for establishing the preponderant physical mechanisms behind the non-linear behaviors, suggesting that automated experiments can potentially discern between competing physical mechanisms. Furthermore, this technique can also be extended to electron, probe, and chemical imaging.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Four–Terminal Perovskite–CdSeTe Tandem Solar Cells: From 25% toward 30% Power Conversion Efficiency and Beyond

Thin-film tandem photovoltaic (PV) technology has emerged as a promising avenue to enhance power conversion efficiency beyond the radiative efficiency limit of single-junction devices. Combining a tunable wide-bandgap perovskite cell with a commercially established narrow-bandgap cadmium selenium telluride (CdSeTe) cell in a comparatively easy-to-fabricate four-terminal (4-T) arrangement is a great step in that direction. Herein, the impact of the transparent back contact and the perovskite absorber bandgap on the performance of 4-T perovskite–CdSeTe tandem solar cells is investigated. 4-T perovskite–CdSeTe tandem device architecture with ≈25% efficiency is demonstrated and a feasible pathway is shown to improve the tandem efficiency to more than 30%. Furthermore, the results show that the integration of CdSeTe with perovskite in 4-T tandem PV configurations represents a significant advancement toward achieving higher efficiency and low-cost tandem PVs.

14 SOLAR ENERGY↗

Refine your search to explore more results.