Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “intervals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Critical Properties in the Ising Model on a Triangular Lattice with the Variable Interlayer Exchange Interaction

Phase transitions and critical and thermodynamic properties of the three-dimensional antiferromagnetic Ising model on a layered triangular lattice with variable interlayer exchange interaction are studied by the replica algorithm of the Monte Carlo method. The studies are carried out for the ratios of the intralayer J{sub 1} and interlayer J{sub 2} exchange interactions in the range of r = J{sub 2}/J{sub 1} = 0.01–1.0. It is established that a second-order phase transition is observed in the considered r interval. Using the finite size scaling theory, the static critical exponents of the heat capacity α, susceptibility γ, order parameter β, correlation radius ν, and Fisher index η are calculated. It is shown that the universality class of the critical behavior of this model is preserved in the interval of 0.05 < r ≤ 1.0. It was found that with a further decrease in the r value, a crossover from the three-dimensional critical behavior to the quasi-two-dimensional one is observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Day-to-day reliability of basal heart rate and short-term and ultra short-term heart rate variability assessment by the Equivital eq02+ LifeMonitor in US Army soldiers

Introduction The present study determined the (1) day-to-day reliability of basal heart rate (HR) and HR variability (HRV) measured by the Equivital eq02+ LifeMonitor and (2) agreement of ultra short-term HRV compared with short-term HRV. Methods Twenty-three active-duty US Army Soldiers (5 females, 18 males) completed two experimental visits separated by >48 hours with restrictions consistent with basal monitoring (eg, exercise, dietary), with measurements after supine rest at minutes 20–21 (ultra short-term) and minutes 20–25 (short-term). HRV was assessed as the SD of R–R intervals (SDNN) and the square root of the mean squared differences between consecutive R–R intervals (RMSSD). Results The day-to-day reliability (intraclass correlation coefficient (ICC)) using linear-mixed model approach was good for HR (0.849, 95% CI: 0.689 to 0.933) and RMSSD (ICC: 0.823, 95% CI: 0.623 to 0.920). SDNN had moderate day-to-day reliability with greater variation (ICC: 0.689, 95% CI: 0.428 to 0.858). The reliability of RMSSD was slightly improved when considering the effect of respiration (ICC: 0.821, 95% CI: 0.672 to 0.944). There was no bias for HR measured for 1 min versus 5 min (p=0.511). For 1 min measurements versus 5 min, there was a very modest mean bias of −4 ms for SDNN and −1 ms for RMSSD (p≤0.023). Conclusion When preceded by a 20 min stabilisation period using restrictions consistent with basal monitoring and measuring respiration, military personnel can rely on the eq02+ for basal HR and RMSSD monitoring but should be more cautious using SDNN. These data also support using ultra short-term measurements when following these procedures.

General & Internal Medicine↗

Computer Model Calibration with Time Series Data Using Deep Learning and Quantile Regression

Computer models play a key role in many scientific and engineering problems. One major source of uncertainty in computer model experiments is input parameter uncertainty. Computer model calibration is a formal statistical procedure to infer input parameters by combining information from model runs and observational data. The existing standard calibration framework suffers from inferential issues when the model output and observational data are high-dimensional dependent data, such as large time series, due to the difficulty in building an emulator and the nonidentifiability between effects from input parameters and data-model discrepancy. To overcome these challenges, we, in this work, propose a new calibration framework based on a deep neural network (DNN) with long short-term memory layers that directly emulates the inverse relationship between the model output and input parameters. Adopting the “learning with noise” idea, we train our DNN model to filter out the effects from data-model discrepancy on input parameter inference. We also formulate a new way to construct interval predictions for DNN using quantile regression to quantify the uncertainty in input parameter estimates. Through a simulation study and real data application with the Weather Research and Forecasting Model Hydrological modeling system (WRF-Hydro), we show our approach can yield accurate point estimates and well-calibrated interval estimates for input parameters.

97 MATHEMATICS AND COMPUTING↗

Search for decays of stopped long-lived particles produced in proton–proton collisions at $\sqrt{s}= 8\,\text {TeV} $

A search has been performed for long-lived particles that could have come to rest within the CMS detector, using the time intervals between LHC beam crossings. The existence of such particles could be deduced from observation of their decays via energy deposits in the CMS calorimeter appearing at times that are well separated from any proton–proton collisions. Using a data set corresponding to an integrated luminosity of 18.6 fb -1 of 8 TeV proton–proton collisions, and a search interval corresponding to 281 h of trigger livetime, 10 events are observed, with a background prediction of 13.2 +3.6 -2.5 events. Limits are presented at 95 % confidence level on gluino and top squark production, for over 13 orders of magnitude in the mean proper lifetime of the stopped particle. Assuming a cloud model of R-hadron interactions, a gluino with mass ≤1000 GeV and a top squark with mass ≤525 GeV are excluded, for lifetimes between 1 µs and 1000 s. Finally, these results are the most stringent constraints on stopped particles to date.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Charged-particle multiplicities in proton–proton collisions at $$\sqrt{s} = 0.9$$ s = 0.9 to 8 TeV

A detailed study of pseudorapidity densities and multiplicity distributions of primary charged particles produced in proton–proton collisions, at s= 0.9, 2.36, 2.76, 7 and 8 TeV, in the pseudorapidity range | η| < 2 , was carried out using the ALICE detector. Measurements were obtained for three event classes: inelastic, non-single diffractive and events with at least one charged particle in the pseudorapidity interval | η| < 1. The use of an improved track-counting algorithm combined with ALICE’s measurements of diffractive processes allows a higher precision compared to our previous publications. A KNO scaling study was performed in the pseudorapidity intervals | η| < 0.5, 1.0 and 1.5. The data are compared to other experimental results and to models as implemented in Monte Carlo event generators PHOJET and recent tunes of PYTHIA6, PYTHIA8 and EPOS.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of $WW/WZ \rightarrow \ell \nu q q^{\prime }$ production with the hadronically decaying boson reconstructed as one or two jets in $pp$ collisions at $\sqrt{s} =8~\text {TeV}$ with ATLAS, and constraints on anomalous gauge couplings

This paper presents a study of the production of WW or WZ boson pairs, with one W boson decaying to e? or µv and one W or Z boson decaying hadronically. The analysis uses 20.2fb -1 of s=8TeVpp collision data, collected by the ATLAS detector at the Large Hadron Collider. Cross-sections for WW / WZ production are measured in high-p T fiducial regions defined close to the experimental event selection. The cross-section is measured for the case where the hadronically decaying boson is reconstructed as two resolved jets, and the case where it is reconstructed as a single jet. The transverse momentum distribution of the hadronically decaying boson is used to search for new physics. Observations are consistent with the Standard Model predictions, and 95% confidence intervals are calculated for parameters describing anomalous triple gauge-boson couplings.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of longitudinal flow decorrelations in Pb+Pb collisions at $\sqrt{s_{\text {NN}}}=2.76$ and 5.02 TeV with the ATLAS detector

Measurements of longitudinal flow correlations are presented for charged particles in the pseudorapidity range |η|<2.4 using 7 and 470 μb -1 of Pb+Pb collisions at $\sqrt{s}$$_ {NN}$= 2.76 and 5.02 TeV, respectively, recorded by the ATLAS detector at the LHC. It is found that the correlation between the harmonic flow coefficients v n measured in two separated η intervals does not factorise into the product of single-particle coefficients, and this breaking of factorisation, or flow decorrelation, increases linearly with the η separation between the intervals. The flow decorrelation is stronger at 2.76 TeV than at 5.02 TeV. Higher-order moments of the correlations are also measured, and the corresponding linear coefficients for the kth-moment of the vn are found to be proportional to k for v 3 , but not for v 2 . The decorrelation effect is separated into contributions from the magnitude of v n and the event-plane orientation, each as a function of η. These two contributions are found to be comparable. The longitudinal flow correlations are also measured between v n of different order in n. The decorrelations of v 2 and v 3 are found to be independent of each other, while the decorrelations of v 4 and v 5 are found to be driven by the nonlinear contribution from v$2\atop{2}$ and v 2 v 3 , respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the inclusive J/$\psi $ polarization at forward rapidity in pp collisions at $\mathbf {\sqrt{s} = 8}$ TeV

Here, we report on the measurement of the inclusive J/ψ polarization parameters in pp collisions at a center of mass energy $ \sqrt{s}=8 $ TeV with the ALICE detector at the LHC. The analysis is based on a data sample corresponding to an integrated luminosity of 1.23 pb -1 . J/ψ resonances are reconstructed in their di-muon decay channel in the rapidity interval 2.5 < y< 4.0 and over the transverse-momentum interval 2 < p T < 15 GeV / c. The three polarization parameters (λ θ , λ φ , λ θφ ) are measured as a function of p T both in the helicity and Collins-Soper reference frames. The measured J/ψ polarization parameters are found to be compatible with zero within uncertainties, contrary to expectations from all available predictions. The results are compared with the measurement in pp collisions at $ \sqrt{s}=7 $ TeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Energy dependence of \(\phi \) meson production at forward rapidity in pp collisions at the LHC

The production of Φ mesons has been studied in pp collisions at LHC energies with the ALICE detector via the dimuon decay channel in the rapidity region 2.5 < y < 4. Measurements of the differential cross section d 2 σ / dydpT are presented as a function of the transverse momentum (p T ) at the center-of-mass energies √s = 5.02, 8 and 13 TeV and compared with the ALICE results at midrapidity. The differential cross sections at √s = 5.02 and 13 TeV are also studied in several rapidity intervals as a function of p T , and as a function of rapidity in three p T intervals. A hardening of the p T -differential cross section with the collision energy is observed, while, for a given energy, p T spectra soften with increasing rapidity and, conversely, rapidity distributions get slightly narrower at increasing p T . The new results, complementing the published measurements at √s = 2.76 and 7 TeV, allow one to establish the energy dependence of Φ meson production and to compare the measured cross sections with phenomenological models. None of the considered models manages to describe the evolution of the cross section with p T and rapidity at all the energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Searches for exclusive Higgs and Z boson decays into a vector quarkonium state and a photon using 139 fb$^{-1}$ of ATLAS $\sqrt{s}=13$ TeV proton–proton collision data

Searches for the exclusive decays of Higgs and Z bosons into a vector quarkonium state and a photon are performed in the μ + μ - γ final state with a proton– proton collision data sample corresponding to an integrated luminosity of 139 fb -1 collected at $\sqrt{s}=13$ TeV with the ATLAS detector at the CERN Large Hadron Collider. The observed data are compatible with the expected back grounds. The 95% confidence-level upper limits on the branching fractions of the Higgs boson decays into J/ψ γ , ψ(2S) γ , and $Υ$(1S, 2S, 3S) γ are found to be 2.0 × 10 -4 , 10.5×10 -4 , and (2.5, 4.2, 3.4)×10 -4 , respectively, assuming Standard Model production of the Higgs boson. The corresponding 95% CL upper limits on the branching fractions of the Z boson decays are 1.2 × 10 -6 , 2.4 × 10 -6 , and (1.1, 1.3, 2.4) × 10 -6 . An observed 95% CL interval of (-133, 175) is obtained for the κ c /κ γ ratio of Higgs boson coupling modifiers, and a 95% CL interval of (-37, 40) is obtained for κ b /κ γ .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Can the angular scale of cosmic homogeneity be used as a cosmological test?

Abstract In standard cosmology, the cosmic homogeneity scale is the transition scale above which the patterns arising from non-uniformities – such as groups and clusters of galaxies, voids, and filaments – become indistinguishable from a random distribution of sources. Recently, different groups have investigated the feasibility of using such a scale as a cosmological test and arrived at different conclusions. In this paper, we complement and extend these studies by exploring the evolution of the spatial ( $$R_{\textrm{H}}$$ R H ) and angular ( $$\theta _{\textrm{H}}$$ θ H ) homogeneity scales with redshift, assuming a spatially flat, $$\varLambda $$ Λ -Cold Dark Matter universe and linear cosmological perturbation theory. We confirm previous results concerning the non-monotonicity of $$R_{\textrm{H}}$$ R H with the matter density parameter $$\varOmega _{\textrm{m0}}$$ Ω m0 but also show that it exhibits a monotonical behavior with the Hubble constant $$H_{0}$$ H 0 within a large redshift interval. More importantly, we find that, for $$z \gtrsim 0.6$$ z ≳ 0.6 , $$\theta _{\textrm{H}}$$ θ H presents a monotonical behavior with $$\varOmega _{\textrm{m0}}$$ Ω m0 , as well as for $$H_0$$ H 0 the entire redshift interval analyzed. We find also that the angular homogeneity scale is sensitive to $$H_{0}$$ H 0 , especially at higher redshifts. Using the currently available $$\theta _{\textrm{H}}$$ θ H measurements, we illustrate the constraints on the $$\varOmega _{\textrm{m0}}$$ Ω m0 – $$H_{0}$$ H 0 plane through a MCMC analysis and show the feasibility of using the angular homogeneity scale as a new, model-independent way to constrain cosmological parameters.

Physics↗

Multiplicity dependence of charged-particle intra-jet properties in pp collisions at $\sqrt{s}$ = 13 TeV

The first measurement of the multiplicity dependence of intra-jet properties of leading charged-particle jets in proton–proton (pp) collisions is reported. The mean charged particle multiplicity and jet fragmentation distributions are measured in minimum-bias and high-multiplicity pp collisions at center-of-mass energy $\sqrt{s}$ = 13 TeV using the ALICE detector. Jets are reconstructed from charged particles produced in the midrapidity region (|η| < 0.9) using the sequential recombination anti-k T algorithm with jet resolution parameters R = 0.2, 0.3, and 0.4 for the trans verse momentum (p T ) interval 5–110 GeV/c. The high multiplicity events are selected by the forward V0 scintilla tor detectors. The mean charged-particle multiplicity inside the leading jet cone rises monotonically with increasing jet p T in qualitative agreement with previous measurements at lower energies. The distributions of jet fragmentation function variables z ch and ξ ch are measured for different jet-p T intervals. Jet-p T independent fragmentation of leading jets is observed for wider jets except at high- and low-z ch values. The observed “hump-backed plateau” structure in the ξ ch distribution indicates suppression of low-p T particles. In high-multiplicity events, an enhancement of the fragmen tation probability of low-z ch particles accompanied by a suppression of high-zch particles is observed compared to minimum-bias events. This behavior becomes more promi nent for low-p T jets with larger jet radius. The results are compared with predictions of QCD-inspired event generators, PYTHIA 8 with Monash 2013 tune and EPOS LHC. It is found that PYTHIA 8 qualitatively reproduces the jet modification in high-multiplicity events except at high jet p T . These measurements provide important constraints to models of jet fragmentation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Theory and applications of parton pseudodistributions

We review the basic theory of the parton pseudodistributions approach and its applications to lattice extractions of parton distribution functions. The crucial idea of the approach is the realization that the correlator $M(z,p)$ of the parton fields is a function $M(ν,-z^2)$ of Lorentz invariants $ν=-(zp)$, the Ioffe time, and the invariant interval $z^2$. This observation allows to extract the Ioffe-time distribution $M(ν,-z^2)$ from Euclidean separations z accessible on the lattice. Another basic feature is the use of the ratio $M(ν,-z^2)≡M(ν,-z^2)/M(0,-z^2)$, that allows to eliminate artificial ultraviolet divergence generated by the gauge link for spacelike intervals. The remaining $z^2$-dependence of the reduced Ioffe-time distribution $M(ν,-z^2)$ corresponds to perturbative evolution, and can be converted into the scale-dependence of parton distributions $f(x,μ^2)$ using matching relations. The ν-dependence of $M(ν,-z^2)$ governs the x-dependence of parton densities $f(x,μ^2)$. The perturbative evolution was successfully observed in exploratory quenched lattice calculation. The analysis of its precise data provides a framework for extraction of parton densities using the pseudodistributions approach. It was used in the recently performed calculations of the nucleon and pion valence quark distributions. We also discuss matching conditions for the pion distribution amplitude and generalized parton distributions, the lattice studies of which are now in progress.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Fascinating and Complex Dynamics of Geyser Eruptions

Geysers episodically erupt liquid and vapor. Despite two centuries of scientific study, basic questions persist-why do geysers exist? What determines eruption intervals, durations, and heights? What initiates eruptions? Through monitoring eruption intervals, analyzing geophysical data, taking measurements within geyser conduits, performing numerical simulations, and constructing laboratory models, some of these questions have been addressed. Geysers are uncommon because they require a combination of abundant water recharge, magmatism, and rhyolite flows to supply heat and silica, and large fractures and cavities overlain by low-permeability materials to trap rising multiphase and multicomponent fluids. Eruptions are driven by the conversion of thermal to kinetic energy during decompression. Larger and deeper cavities permit larger eruptions and promote regularity by isolating water from weather variations. Furthermore, the ejection velocity may be limited by the speed of sound of the liquid + vapor mixture.

58 GEOSCIENCES↗

DMS Program Runner Service

The DMS Program Runner (MultiProgRunner) is a Windows Service that can be configured to start specific programs on a regular interval. In the Proteomics Research Information and Management System (PRISM) the DMS Program runner Service is used to run manager programs at regular intervals.

Monroe, Matthew↗

Open Smart Energy Gateway (OpenSEG)

The Open Smart Energy Gateway (OpenSEG) aims to provide near-real time smart meter data to consumers without the delays or latencies associated with it being transported to the utility data center and then back to the consumer's application. To do this, the gateway queries the local Smart Meter to which it is bound to get energy consumption information at pre-defined intervals (minimum interval is 4 seconds). OpenSEG then stores the resulting data internally for retrieval by an external application.

McParland, Charles↗

Point Source Likelihood Framework (psl) v1.0

PSL is a software framework for localizing radiation point sources in a 3D environment using a freely moving radiation detector system. The framework assumes a single point source of radiation is in the environment and uses known detector positions and orientations along with their radiation measurements to find the most likely location of the point source. This approach to the problem enables analyses that improve upon the capability of a standard Maximum Likelihood Expectation Maximization (MLEM) approach, such as setting a source detection threshold, finding a likelihood interval for the position of the source, finding a likelihood interval for the activity (intensity) of the source, determining whether more than one point source may be present, and generating a map of Minimum Detectable Activity (MDA) for a given source type. Applications include radiological and nuclear security, consequence management, decontamination and decommissioning of nuclear facilities, and radiological emergency response.

Joshi, Tenzing↗

Predictive Control of Residential Gas Storage Water Heaters [SWR-13-36]

Predictive Control of Residential Gas Storage Water Heaters provides an energy-efficient control method for residential gas storage water heaters. Predictive Control of Residential Gas Storage Water Heaters discovers users' hot water consumption patterns from historical data and automatically modulates the thermostat setpoints to conserve energy while maintaining thermal comfort. The starting time of hot water draw events is recorded and used for clustering analysis. Time intervals are generated from the clusters in which hot water draw events are more likely to occur. The setpoint is set at normal level to maintain thermal comfort, and decreased to a lower level outside these time intervals to reduce tank loss and thereby improving energy efficiency of the water heater.

Christensen, Dane↗

Refine your search to explore more results.