Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “generalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Emergency in-flight egress for general aviation aircraft

A NASA program for development of an inflight egress system for the left (pilot) door of general aviation aircraft is described. The pyrotechnic release door was felt to be necessary because of pilot difficulty in reaching the right door when subjected to spin/stall centrifugal effects. A flexible, linear shaped charged of hexanitrostibene II and a lanyard actuated detonator are discussed, along with mock-up tests and instrumentation. The egress system was designed for minimum structural impact, mimimum pilot initiation procedures, low weight, and no egress interference, and to provide sufficient force to blow off the door, have low required maintenance, and high reliability. Results of 68 tests are reviewed, noting the inclusion of a screen to keep glass fragments from spraying the cabin. Certification was achieved, and uses in the F-111 and B-1 aircraft are noted.

Bement, L. J.↗

Equivalence of the generalized Lie-Hori method and the method of averaging

In this investigation, a comparison is made of two methods for developing perturbation theories for non-canonical dynamical systems. The methods compared are the generalized Lie-Hori method and the method of averaging. In the comparison presented here, the equivalence of the methods up to the second order in the small parameter is shown. However, the approach used can be extended to demonstrate the equivalence for higher orders. To illustrate the equivalence both Duffing's equation and the van der Pol equation are solved using each method.

Ahmed, A.↗

A general purpose computer-to-computer interface Xerox Sigma computer-to-DEC PDP 11 computer

The Sigma/PDP 11 Interface is a general-purpose system for interconnecting a Xerox Sigma series computer and a DEC PDP 11 series computer. Although the unit is designed to operate in a real-time environment, it can be used in nonreal-time modes as well. Several features, designed to facilitate using the system in varied applications are included in the unit; for example, the features can be used to isolate software or hardware faults. This paper contains descriptions of the hardware and software operations of the interface and examples of real-time applications in the research environment at Ames Research Center.

Fetter, J. L.↗

Magnetohydrodynamic equilibrium. II - General integrals of the equations with one ignorable coordinate

The steady equations of hydromagnetics for the isentropic or nonisentropic flow of an inviscid magnetofluid of high electrical conductivity, with one ignorable coordinate in a general orthogonal system, are treated. Several integrals of the equations are established thereafter reducing them to a scalar, quasi-linear, second order, partial differential equation for the magnetic potential. Simple solutions of this final equation are presented. The result, together with a similar treatment of helically symmetric hydromagnetic flows presented in a subsequent paper, allows a unified and systematic approach to the solution of problems involving steady hydromagnetic fields with a topological invariance in various curvilinear coordinates.

Tsinganos, K. C.↗

Tests of general relativity using Starprobe radio metric tracking data

The potential of a proposed spacecraft mission, called Starprobe, for testing general relativity and providing information on the interior structure and dynamics of the sun is investigated. Parametric, gravitational perturbation terms are derived which represent relativistic effects and effects due to spatial and temporal variations in the solar potential at a given radial distance. A covariance analysis based on Kalman filtering theory predicts the accuracies with which the free parameters in the perturbation terms can be estimated with radio metric tracking data through the process of trajectory reconstruction. It is concluded that Starprobe can contribute significant information on both the nature of gravitation and the structure and dynamics of the solar interior.

Mease, K. D.↗

A January angular momentum balance in the OSU two-level atmospheric general circulation model

The present investigation is concerned with an analysis of the atmospheric angular momentum balance, based on the simulation data of the Oregon State University two-level atmospheric general circulation model (AGCM). An attempt is also made to gain an understanding of the involved processes. Preliminary results on the angular momentum and mass balance in the AGCM are shown. The basic equations are examined, and questions of turbulent momentum transfer are investigated. The methods of analysis are discussed, taking into account time-averaged balance equations, time and longitude-averaged balance equations, mean meridional circulation, the mean meridional balance of relative angular momentum, and standing and transient components of motion.

Kim, J.-W.↗

Solution of the two-dimensional Euler equations with generalized coordinate transformation using flux vector splitting

An implicit finite difference code using flux vector splitting has been developed for solving the two-dimensional inviscid gas dynamics equations. The method is spatially second-order acurate, fully conservative, and uses body-conforming generalized coordinates for treating complex geometries. Numerical results have been obtained for transonic flow over a circular cylinder and airfoils. Steady results for a half cylinder (top and bottom symmetry-imposed) range from critical flow to a strong shock case with rotationally induced flow separation. Full cylinder solutions at freestream Mach number values of 0.5, however, show unsteady oscillation. A perturbation form of the method has also been developed and used to compute both fore and aft inviscid flow separation about a cylinder for a nonuniform incoming stream.

Buning, P. G.↗

Analysis of general-aviation accidents using ATC radar records

It is pointed out that general aviation aircraft usually do not carry flight recorders, and in accident investigations the only available data may come from the Air Traffic Control (ATC) records. A description is presented of a technique for deriving time-histories of aircraft motions from ATC radar records. The employed procedure involves a smoothing of the raw radar data. The smoothed results, in combination with other available information (meteorological data and aircraft aerodynamic data) are used to derive the expanded set of motion time-histories. Applications of the considered analytical methods are related to different types of aircraft, such as light piston-props, executive jets, and commuter turboprops, as well as different accident situations, such as takeoff, climb-out, icing, and deep stall.

Wingrove, R. C.↗

On the solution of creep induced buckling in general structure

This paper considers the pre and post buckling behavior of general structures exposed to high temperature fields for long durations wherein creep effects become significant. The solution to this problem is made possible through the use of closed upper bounding constraint surfaces which enable the development of a new time stepping algorithm. This permits the stable and efficient solution of structural problems which exhibit indefinite tangent properties. Due to the manner of constraining/bounding successive iterates, the algorithm developed herein is largely self adaptive, inherently stable, sufficiently flexible to handle geometric material and boundary induced nonlinearity, and can be incorporated into either finite element or difference simulations. To illustrate the capability of the procedure, as well as, the physics of creep induced pre and post buckling behavior, the results of several numerical experiments are included.

Padovan, J.↗

A conservative finite difference algorithm for the unsteady transonic potential equation in generalized coordinates

An implicit, approximate-factorization, finite-difference algorithm has been developed for the computation of unsteady, inviscid transonic flows in two and three dimensions. The computer program solves the full-potential equation in generalized coordinates in conservation-law form in order to properly capture shock-wave position and speed. A body-fitted coordinate system is employed for the simple and accurate treatment of boundary conditions on the body surface. The time-accurate algorithm is modified to a conventional ADI relaxation scheme for steady-state computations. Results from two- and three-dimensional steady and two-dimensional unsteady calculations are compared with existing methods.

Bridgeman, J. O.↗

Wind-tunnel investigation of a full-scale canard-configured general aviation aircraft

As part of a broad research program to provide a data base on advanced airplane configurations, a wind-tunnel investigation was conducted in the Langley 30-by 60-Foot Wind Tunnel to determine the aerodynamic characteristics of an advanced canard-configured general aviation airplane. The investigation included measurements of forces and moments of the complete configuration, isolated canard loads, and pressure distributions on the wing, winglet, and canard. Flow visualization was obtained by using surface tufts to determine regions of flow separation and by using a chemical sublimation technique to determine boundary-layer transition locations. Additionally, other tests were conducted to determine simulated rain effects on boundary layer transition. Investigation of configuration effects included variations of canard locations, canard airfoil section, winglet size, and use of a leading-edge droop on the out-board section of the wing.

Yip, L. P.↗

General Maneuver Program

General Maneuver Program, GMAN, computes both orbital and spin-axis reorientation maneuver parameters for various spacecraft. Specifically, GMAN computes detailed maneuver scenarios necessary to achieve desired orbit and attitude maneuvers. Program supports both spinning and inertially-fixed despun spacecraft and includes modeling for either hydrazine or Freon propulsion system.

Erickson, J. A.↗

Wind-tunnel investigation of effects of wing-leading-edge modifications on the high angle-of-attack characteristics of a T-tail low-wing general-aviation aircraft

Exploratory tests have been conducted in the NASA-Langley Research Center's 12-Foot Low-Speed wind Tunnel to evaluate the application of wing-leading-edge devices on the stall-departure and spin resistance characteristics of a 1/6-scale model of a T-tail general-aviation aircraft. The model was force tested with an internal strain-gauge balance to obtain aerodynamic data on the complete configuration and with a separate wing balance to obtain aerodynamic data on the outer portion of the wing. The addition of the outboard leading-edge droop eliminated the abrupt stall of the windtip and maintained or increased the resultant-force coefficient up to about alpha = 32 degrees. This change in slope of the resultant-force coefficient curve with angle of attack has been shown to be important for eliminating autorotation and for providing spin resistance.

White, E. R.↗

Rotary balance data for a typical single-engine general aviation design for an angle-of-attack range of 8 deg to 90 deg. 2: Influence of horizontal tail location for Model D

The influence of horizontal tail location on the rotational flow aerodynamics is discussed for a 1/6-scale general aviation airplane model. The model was tested using various horizontal tail positions, with both a high and a low-wing location and for each of two body lengths. Data were measured, using a rotary balance, over an angle-of-attack range of 8 to 90 deg, and for clockwise and counter-clockwise rotations covering an Omega b/2V range of 0 to 0.9.

Barnhart, B.↗

Tropical disturbances in relation to general circulation modeling

The initial results of an evaluation of the performance of the Goddard Laboratory of Atmospheric Simulation general circulation model depicting the tropical atmosphere during the summer are presented. Because the results show the existence of tropical wave disturbances throughout the tropics, the characteristics of synoptic disturbances over Africa were studied and a synoptic case study of a selected disturbance in this area was conducted. It is shown that the model is able to reproduce wave type synoptic disturbances in the tropics. The findings show that, in one of the summers simulated, the disturbances are predominantly closed vortices; in another summer, the predominant disturbances are open waves.

Estoque, M. A.↗

Approximate Method of Calculating Heating Rates at General Three-Dimensional Stagnation Points During Atmospheric Entry

An approximate method for calculating heating rates at general three dimensional stagnation points is presented. The application of the method for making stagnation point heating calculations during atmospheric entry is described. Comparisons with results from boundary layer calculations indicate that the method should provide an accurate method for engineering type design and analysis applications.

Hamilton, H. H., II↗

Low-speed aerodynamic characteristics of a 17-percent-thick medium speed airfoil designed for general aviation applications

Wind tunnel tests were conducted to determine the low speed two dimensional aerodynamic characteristics of a 17 percent thick medium speed airfoil (MS(1)-0317) designed for general aviation applications. The results were compared with data for the 17 percent thick low speed airfoil (LS(1)-0417) and the 13 percent thick medium speed airfoil (MS(1)-0313). Theoretical predictions of the drag rise characteristics of this airfoil are also provided. The tests were conducted in the Langley low turbulence pressure tunnel over a Mach number range from 0.10 to 0.32, a chord Reynolds number range from 2 million to 12 million, and an angle of attack range from about -8 to 20 deg.

Mcghee, R. J.↗

Refine your search to explore more results.