Electric Market and Utility Operation Terminology (Fact Sheet)
This fact sheet is a list of electric market and utility operation terminology for a series of three electricity fact sheets.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This fact sheet is a list of electric market and utility operation terminology for a series of three electricity fact sheets.
Highlights: • Successfully synthesized (0.7)CoFe{sub 2}O{sub 4}+(0.3)BaTiO{sub 3} composite by ball-milling method. • Structural properties confirmed the presence of both constituent phases. • Dielectric properties showed high value of permittivity and diminished dielectric loss at higher frequency. • Electric response of the constituent phases explained the observed relaxation processes. • Small polaron hopping mechanism governed the conduction mechanism. - Abstract: Magnetoelectric composite of particular composition (0.7)CoFe{sub 2}O{sub 4}+(0.3)BaTiO{sub 3} was synthesized by ball-milling method. X-ray diffraction pattern confirmed the presence of cubic spinel phase for CoFe{sub 2}O{sub 4} and the coexistence of tetragonal phase along with a small fraction of hexagonal phase for BaTiO{sub 3} in the prepared composite. The dielectric permittivity increased with increasing temperature (298–373 K); however, it showed relatively high magnitude of permittivity (∼1100) and diminished dielectric loss (∼0.045) at higher frequency. Complex impedance and modulus plots exhibited responses of different electro-active regions which are explained on the basis of coexistence of resistive and comparatively conductive phases in the prepared composite. Small polaronic hopping model was employed to explain the n-type carrier’s mobility as a possible conduction mechanism; whereas the activation energies calculated from the conduction and relaxation processes were found to be comparable. These results indicate that electric/dielectric properties and relaxation phenomenon are associated to the same origin.
This fact sheet is a list of electric market and utility operation terminology for a series of three electricity fact sheets.
Frequency and time controlled models for analyzing human response during compensatory tracking
Na{sub 0.5}Y{sub 0.5}Cu{sub 3}Ti{sub 4}O{sub 12} ceramics prepared by the conventional solid-state reaction method under various sintering conditions were found to exhibit a giant dielectric constant over 10 000 around room temperature. Two electrical responses were observed in the combined modulus and impedance plots, indicating the presence of Maxwell-Wagner relaxation. The contributions of semiconducting grains and insulating grain boundaries (corresponding to high-frequency and low-frequency electrical response, respectively) played important roles in the dielectric properties of Na{sub 0.5}Y{sub 0.5}Cu{sub 3}Ti{sub 4}O{sub 12} ceramics. The correlations between grain boundaries resistance and low frequency dielectric loss, grains resistance and the position of dielectric loss peak were addressed. Mixed-valent structures of Cu{sup 2+}/Cu{sup 3+} and Ti{sup 3+}/Ti{sup 4+} had been determined using X-ray photoelectron spectroscopy. Electron hopping between Cu{sup 2+} and Cu{sup 3+} and electron transport in Ti{sup 3+}-O-Ti{sup 4+} paths were proposed as the origin of the semiconducting nature of Na{sub 0.5}Y{sub 0.5}Cu{sub 3}Ti{sub 4}O{sub 12} ceramics. In particular, high-temperature dielectric anomaly behavior was investigated in detail. A dielectric peak exhibiting relaxor-like behavior was observed around 200 Degree-Sign C, which was linked with the formation of oxygen vacancies. Based on the electric modulus results, this behavior was explored in the light of the defect formation and explained in terms of a competition process depending on the combinational contribution to polarization between n- and p-type carriers rather than a relaxation process.
The transport and complex optical properties of the electron-doped iron-arsenic superconductor BaFe{sub 1.85}Co{sub 0.15}As{sub 2} with T{sub c} = 25 K have been examined in the Fe-As planes above and below T{sub c}. A Bloch-Grueneisen analysis of the resistivity yields a weak electron-phonon coupling constant {lambda}{sub ph} {approx_equal} 0.2. The low-frequency optical response in the normal state appears to be dominated by the electron pocket and may be described by a weakly interacting Fermi liquid with a Drude plasma frequency of {omega}{sub p,D} {approx_equal} 7840 cm{sup -1} ({approx_equal}0.972eV) and scattering rate 1/{tau}{sub D} {approx_equal} 126 cm{sup -1} ({approx_equal}15 meV) just above T{sub c}. The frequency-dependent scattering rate 1/{tau}({Omega}) has kinks at {approx_equal}12 and 55 meV that appear to be related to bosonic excitations. Below T{sub c} the majority of the superconducting plasma frequency originates from the electron pocket and is estimated to be {omega}{sub p,S} {approx_equal} 5200 cm{sup -1} ({lambda}{sub 0} {approx_equal} 3000 {angstrom}) for T << T{sub c}, indicating that less than half the free carriers in the normal state have collapsed into the condensate, suggesting that this material is not in the clean limit. Supporting this finding is the observation that this material falls close to the universal scaling line for a Bardeen, Cooper, and Schrieffer dirty-limit superconductor in the weak-coupling limit. There are two energy scales for the superconductivity in the optical conductivity and photoinduced reflectivity at {Delta}{sub 1}(0){approx_equal}3.1 {+-} 0.2 meV and {Delta}{sub 2}(0){approx_equal}7.4 {+-} 0.3 meV. This corresponds to either the gapping of the electron and hole pockets, respectively, or an anisotropic s-wave gap on the electron pocket; both views are consistent with the s{sup {+-}} model.
Recently, left-handed metamaterials (LHM s) have been demonstrated with an effective negative index of refraction and with antiparallel group and phase velocities for microwave radiation over a narrow frequency bandwidth. In order to take advantage of these characteristics for practical applications, it will be beneficial to develop LHM s with increased frequency bandwidth response and lower losses. In this paper a commercial three-dimensional electromagnetic simulation code is used to explore the effects of geometry parameter variations on the frequency bandwidth of a LHM at microwave frequencies. Utilizing an optimizing routine in the code, a geometry was generated with a bandwidth more than twice as large as the original geometry.
A theoretical analysis for the dynamic performance characteristics of laminar flow, capillar/orifice compensated hydrostatic journal bearings is presented. The analysis considers in detail the effect of fluid compressibility in the bearing recesses. At high frequency excitations beyond a break frequency, the bearing hydrostatic stiffness increases sharply and it is accompanied by a rapid decrease in direct damping. Also, the potential of pneumatic hammer instability (negative damping) at low frequencies is likely to occur in hydrostatic bearing applications handling highly compressible fluids. Useful design criteria to avoid undesirable dynamic operating conditions at low and high frequencies are determined. The effect of fluid recess compressibility is brought into perspective, and found to be of utmost importance on the entire frequency spectrum response and stability characteristics of hydrostatic/hybrid journal bearings.
Use of a protective grid on small diameter microphones can prolong the lifetime of the unit, but the high frequency effects can complicate data interpretation. Analytical methods have been developed to correct for the grid effect at high frequencies. Specifically, the analysis pertains to quantifying the microphone protective grid response characteristics in the acoustic near field of a rocket plume noise source. A frequency response function computation using two microphones will be explained. Experimental and instrumentation setup details will be provided. The resulting frequency response function for a B&K 4944 condenser microphone protective grid will be presented, along with associated uncertainties
Closed cylindrical shell response to randomly time distributed broadband acoustic excitations, using statistical energy method to compute displacement and interior pressure
Interdigitated photodetectors of various geometries have been fabricated on GaAlAs/GaAs heterostructure material. Optical response characteristics of these devices have been examined at both dc and microwave frequencies. The microwave response, at frequencies to 8 GHz, was studied by illuminating the devices with the output of an internally modulated GaAlAs diode laser. Results of these measurements are presented and compared with that of GaAs photoconductors.
Interdigitated photodetectors of various geometries have been fabricated on GaAlAs/GaAs heterostructure material. Optical response characteristics of these devices have been examined at both dc and microwave frequencies. The microwave response, at frequencies to 8 GHz, was studied by illuminating the devices with the output of an internally modulated GaAlGa diode laser. Results of these measurements are presented and compared with that of GaAs photoconductors.
Longitudinal vibration response of simplified Thor vehicle structure determined in analytical and experimental study
A vibration welding system includes a controller, welding horn, an anvil, and a passive damping mechanism (PDM). The controller generates an input signal having a calibrated frequency. The horn vibrates in a desirable first direction at the calibrated frequency in response to the input signal to form a weld in a work piece. The PDM is positioned with respect to the system, and substantially damps or attenuates vibration in an undesirable second direction. A method includes connecting the PDM having calibrated properties and a natural frequency to an anvil of an ultrasonic welding system. Then, an input signal is generated using a weld controller. The method includes vibrating a welding horn in a desirable direction in response to the input signal, and passively damping vibration in an undesirable direction using the PDM.
Surface acoustic wave (SAW) devices have been shown recently to be an appropriate technology for harsh environment sensor applications, such as those in the automotive, aerospace, power plant, and metallurgic industries. Usages include temperature, pressure, torque, strain, gas, liquid, biochemical, and mass sensors in structural health monitoring, industrial process monitoring, environment checking and control, and condition based maintenance. For harsh environment high-temperature applications, battery-free wireless operation associated with sensor robustness, small profile, and mass fabrication capability make SAW sensors a very attractive solution. For high-temperature (< 800°C) gas sensor applications, the stability of SAW sensor platform including protective and sensing film layers must be guaranteed over time and under temperature cycling conditions. This paper reports on the performance and stability of langasite SAW resonator (SAWR) sensor platform using PtAl2O3-based electrode, with atomic layer deposited (ALD) Al2O3 protective layer and yttria-stabilized zirconia (YSZ) gas sensing layer. The effect of 50nm thick Al2O3 or YSZ layers on SAWR sensor resonant frequency and temperature sensitivity responses were investigated. Temperature sensitivities of SAWR sensors with and without ALD Al2O3 protective layer have been compared with numerical predictions for a bare substrate. Measured temperature sensitivities of SAWR sensors with and without the YSZ sensing layers have been compared against each other. In addition, the stability of the SAWR sensor frequency responses have been monitored during multiple 110-hour temperature cycling (over 620 hours in total) from 300°C to 750°C. The measured frequency deviation at 750ºC over six of these 110-hour cycling tests was 0.05%. The results obtained confirm that the presence of the ALD Al2O3 protective layer or the YSZ sensing layer do not compromise the stability of high-temperature harsh environment SAWR sensors, validating their use for the aforementioned applications.
While evidence suggests that culinary herbs have the potential to modulate gut microbiota, much of the current research investigating the interactions between diet and the human gut microbiome either largely excludes culinary herbs or does not assess use in standard culinary settings. As such, the primary objective of this study was to evaluate how the frequency of culinary herb use is related to microbiome diversity and the abundance of certain taxa, measured at the phylum level. In this secondary data analysis of the INCLD Health cohort, we examined survey responses assessing frequency of culinary herb use and microbiome analysis of collected stool samples. We did not observe any associations between frequency of culinary herb use and Shannon Index, a measure of alpha diversity. Regarding the abundance of certain taxa, the frequency of use of polyphenol-rich herbs and herbs with certain quantities of antibacterial compounds was positively associated with Firmicutes abundance, and negatively associated with Proteobacteria abundance. Additionally, the total number of herbs used with high frequency, defined as over three times per week, was also positively associated with Firmicutes abundance, independent of adjustments, and negatively associated with Proteobacteria abundance, after adjusting for dietary factors. Frequency of culinary herb use was not associated with Bacteroidota or Actinobacteria abundance.
We present a new device concept for a mixer element for THz frequencies. This uses a superconducting transition-edge microbridge biased at the center of its superconducting transition near 4.2 K. It is fed from an antenna or waveguide structure. Power from a local oscillator and an RF signal produce a temperature and resulting resistance variation at the difference frequency. The new aspect is the use of a very short bridge in which rapid (less than 0.1 ns) outdiffusion of hot electrons occurs. This gives large intermediate frequency (IF) response. The mixer offers about 4 GHz IF bandwidth, about 80 ohm RF resistive impedance, good match to the IF amplifier, and requires only 1-20 nW of local oscillator power. The upper RF frequency is determined by antenna or waveguide properties. Predicted mixer conversion efficiency is 1/8, and predicted double-sideband receiver noise temperatures are 260 and 90 K for transition widths of 0.1 and 0.5 Tc, respectively.
In poly(vinylidene difluoride) (PVDF)-based polymers, the alignment of dipoles of the crystalline $β$ phase with alltrans conformations is responsible for ferroelectricity; however, there is a lack of direct spectroscopic evidence for this phenomenon. We report in situ monitoring of the molecular orientations associated with ferroelectric responses of PVDF-based polymers using vibrational sum frequency generation (SFG) spectroscopy. The orientation of CH 2 groups with respect to the -(CH 2 CF 2 ) n - chain axis of the poled $β$ domains in a PVDF copolymer was determined from the SFG dependence of an uniaxially aligned sample on the laser polarization and azimuthal angle. The relative intensities of CH 2 symmetric and asymmetric stretch modes as well as their total intensities revealed the transformation of the all-trans conformation domains during the electrical poling of PVDF based co- and terpolymer films.
Refine your search to explore more results.