Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “form”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Spectral form factor in sparse SYK models

We investigate the spectral form factor of the sparse Sachdev-Ye-Kitaev model. We use numerical methods to establish that at intermediate times the connected part of the spectral form factor is the dominant one. These connected contributions arise from fluctuations around the disconnected geometry, not from a new saddle point. A similar effect was previously conjectured in SYK but required a value of N out of reach of current numerical simulations.

2D Gravity↗

A note on NMHV form factors from the Graßmannian and the twistor string

In this note we investigate Graßmannian formulas for form factors of the chiral part of the stress-tensor multiplet in N = 4 superconformal Yang-Mills theory. We present an all-n contour for the G(3, n + 2) Graßmannian integral of NMHV form factors derived from on-shell diagrams and the BCFW recursion relation. In addition, we study other G(3, n + 2) formulas obtained from the connected prescription introduced recently. We find a recursive expression for all n and study its properties. For n ≥ 6, our formula has the same recursive structure as its amplitude counterpart, making its soft behaviour manifest. Finally, we explore the connection between the two Graßmannian formulations, using the global residue theorem, and find that it is much more intricate compared to scattering amplitudes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Heterotic sigma models on T 8 and the Borcherds automorphic form Φ 12

Here, we consider the spectrum of BPS states of the heterotic sigma model with (0, 8) supersymmetry and T 8 target, as well as its second-quantized counterpart. We show that the counting function for such states is intimately related to Borcherds’ automorphic form Φ 12 , a modular form which exhibits automorphy for O(2, 26; Ζ). Here, we comment on possible implications for Umbral moonshine and theories of AdS 3 gravity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Perturbative calculations of gravitational form factors at large momentum transfer

We perform a perturbative QCD analysis of the gravitational form factors (GFFs) of nucleon at large momentum transfer. We derive the explicit factorization formula of the GFFs in terms of twist-3 and twist-4 light-cone distribution amplitudes of nucleon. Power behaviors for these GFFs are obtained from the leading order calculations. Numeric results of the quark and gluon contributions to various GFFs are presented with model assumptions for the distribution amplitudes in the literature. We also present the perturbative calculations of the scalar form factor $\langle P$' $|F^2|P \rangle$ for pion and proton at large momentum transfer.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Resonance form factors from finite-volume correlation functions with the external field method

A novel method for the extraction of form factors of unstable particles on the lattice is proposed. The approach is based on the study of two-particle scattering in a static, spatially periodic external field by using a generalization of the Lüscher method in the presence of such a field. It is shown that the resonance form factor is given by the derivative of the resonance pole position in the complex plane with respect to the coupling constant to the external field. Unlike the standard approach, this proposal does not suffer from problems caused by the presence of the triangle diagram.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects of Cashew Nut Shell Liquid and Its Decarboxylated Form on the Properties of Natural Rubber

Effects of addition of raw cashew nut shell liquid (CNSL) or its decarboxylated form (D-CNSL or cardanol) on curing characteristics, physical properties and temperature scanned stress relaxation were investigated. The study revealed that the CNSL containing high anacardic acid concentration acts as an acid activator and strongly affects curing behavior of NR compounds. The effective curing rate and curing efficiency, i.e., torque difference, crosslink density, and activation energy for curing, clearly increased with 2–5 phr of CNSL. Furthermore, physical properties and thermal stability also improved. However, when the acidity was removed by forming D-CNSL, the effects were totally different from those of the CNSL. The D-CNSL behaves like a plasticizer improving chain flexibility and might show dilution effects if used at a high content in the compound formulation. These effects are clearly seen in decreased curing rate and curing efficiency, together with slight losses of tensile properties, tear strength, and thermal stability, with D-CNSL addition.

36 MATERIALS SCIENCE↗

Peculiarities of Magnetic States of Iron-Cobalt Coatings Formed on Aluminum by Plasma Electrolytic Oxidation

Ferromagnetic oxide coatings were formed on aluminum alloy by the plasma-electrolytic oxidation technique in an electrolyte with colloidal particles of iron and cobalt hydroxides. Iron and cobalt are concentrated in the coating pores as a part of nanosized crystallites. The size of individual crystallites in the pores was ∼50–100 nm. The deficit of oxygen to form oxides in crystallites shows that the metals in the crystallites are predominantly in a reduced state. It is also possible that the metal or oxide nuclei are surrounded by oxide-hydroxide shells. The coatings obtained within 5 min have a high coercive force H{sub c} = 1300 Oe. A theoretical analysis of the magnetic properties of Fe-, Co-containing coatings has been performed using the model of clusters consisting of magnetostatically interacting particles. The theoretical value of the saturation magnetization and the experimental values of the coercive force can be explained with the presence of two phases in the nanoparticles: a large antiferromagnetic or ferromagnetic (hydroxides and/or oxides of iron and cobalt) and a small superparamagnetic (iron, cobalt, magnetite, maghemite).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solution of Periodic Boundary-Value Problems of the Spatial Theory of Elasticity in the Vector Form

We discuss boundary-value problems for the system of equations of the spatial theory of elasticity in the class of double-periodic functions and obtain a general solution of the system. We distinguish six types of elementary Floquet waves and examine their energy characteristics. We consider fundamental boundary-value problems in the half-space in the vector form. The diffraction problem for an elastic wave on a periodic system of defects in the vector form is reduced to the paired summator functional equation.

97 MATHEMATICS AND COMPUTING↗

Simulation and research of few-mode optical fiber DMD degradation due to geometry deviation from optimized form

This work presents an alternative fast and simple method for the design of a graded refractive index profile of silica few-mode optical fibers (FMFs) with enlarged core diameter that extremely improves mode effective area, and low differential mode delay (DMD). We demonstrate some results of refractive index profile optimization for 16-LP-mode FMF with enlarged core diameter up to 42 μm and mode effective area more 130 μm{sup 2} under DMD reduction less 120 ps/km all over “C”-band and less 40 ps/km at λ = 1550 nm region. We also propose approach for simulation of the deviation of “real” optical fiber geometry from the optimized form and rigorous method for analysis of large core complicated optical fiber. Here, FMF core asymmetrical ellipticity together with the refractive index profile distortions were considered. They were set and simulated by data from reports of the real commercially available laser-optimized multimode optical fibers of TIA/ISO Cat. OM2+/OM3 refractive index profile measurements, performed by lab optical fiber analyzer kit. We present results of researches of considered FMF DMD spectral curve degradation due to described core geometry deviation from the optimized form. It was noticed, that unlike to only refractive index local fluctuations, FMF core non-circularity strongly distorts higher-order mode field distribution that affects to spectral mode delay curves and may lead to critical total DMD increasing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An Evaluation of the Use of X-ray Residual Stress Determination as a Means of Characterizing Oxidation Damage of Nickel-Based, Cr2O3-Forming Superalloys Subjected to Various Oxidizing Condition

The use of X-ray residual stress determination as a technique for evaluating the damage incurred by nickel-based, Cr2O3-forming superalloy materials under various service conditions (isothermal heating, thermal cycling, applied stress, stressed and cycled) was investigated. Large and small compressive residual stresses were observed for the oxides and the near surface substrates, respectively. It was expected that the applied stresses and thermal cycling would cause an enhanced degree of oxidation damage that would translate into appreciable differences in residual stress values. Differences in the magnitude of residual stress values were not appreciable condition-to-condition, however. An increase in the severity of the oxidizing conditions in the form of longer oxidation times, higher oxidizing temperatures, and a much greater frequency of thermal cycling is suggested for future studies.

36 MATERIALS SCIENCE↗

Fireside Corrosion of Alumina-Forming Austenitic (AFA) Stainless Steels

Here, the performance of four alumina-forming austenitic alloys was tested in simulative fireside corrosion atmospheres. The alloys were exposed at 700 °C to gas atmospheres of oxygen with varying amounts of SO 2 with two deposits, one which contained Na 2 SO 4 /K 2 SO 4 /Fe 2 O 3 in a 1.5:1.5:1.0 molar ratio (SCM) and the other Na 2 SO 4 /K 2 SO 4 in a 1:1 molar ratio (M1). The specimens were placed into alumina crucibles and submerged halfway in the powder deposits. Corrosion first initiated in the region where the deposit was thinnest. In the SCM, most alloys exhibited two-stage kinetics: an initiation stage during which degradation was slow followed by a propagation stage during which degradation was rapid. Exposures in the SCM deposit showed a significant effect of alloy composition and microstructure. In the as-processed state, OC4 suffered severe scale spallation and was not protective, while OC8, which contains a higher Cr content, remained protective. The exposures with the various microstructures indicate the significance of the factor on fireside corrosion. The OC8 alloy was extremely resistant in the as-processed state but was rapidly degraded when the microstructure had been equilibrated prior to exposure. Conversely, the OCS and OCT alloys, which were borderline in the as-processed state were quite resistant after their microstructures had been equilibrated. The results indicate that corrosion resistance in these environments comes from alumina, but the alloys need more Cr and in a very accessible microstructure location to get the third-element effect to promote the alumina. The weight changes and the amount of degradation were more severe with M1 than with the SCM. Furthermore, there was more corrosion when the alkali iron trisulfates must be formed from a thermally grown iron oxide scale, than when the iron oxide was already in the deposit. In the latter case, the rate of degradation by “synergistic fluxing” was reduced.

36 MATERIALS SCIENCE↗

Non-Equilibrium in a Dust-Forming Low-Temperature Plasma: A CARS Study

Dust-forming low-temperature plasmas are versatile systems for the production of nanoparticles with tunable functionalities. While attractive from a materials processing point of view, these systems are inherently complex, with several plasma-induced phenomena determining the properties of the produced materials. Here, we characterize a carbon nanoparticle-forming plasma using coherent anti-Stokes Raman spectroscopy (CARS), with the primary goal of measuring gas temperature. While gas temperature is typically assumed to be at or slightly above room temperature in these reactors, we measure gas temperatures exceeding 1000 K under typical process conditions. We find a correlation between the gas temperature and the nanoparticle yield, suggesting that the particle nucleation and growth process releases energy within the reaction volume, leading to significant gas heating. In addition, we find that the relaxation of vibrationally excited species at the particle surfaces is a major contributor to their heating. In conclusion, these results underscore the complexity of these systems and the need for their more in-depth characterization using advanced techniques such as CARS.

Basic Plasma Phenomena and Gas Discharges↗

Nanostructure and Composition of Tribo-Boundary Films Formed in Ionic Liquid Lubrication

Since the idea of using ionic liquids (ILs) as lubricants was raised in 2001, many studies have been conducted in this area and results have demonstrated superior lubricating performance for a variety of ionic liquids. It is widely believed that tribochemical reactions occur between the metal surface and the IL during the wear process to form a protective tribo-boundary film on the contact area that reduces friction and wear. However, the study of this critical boundary film has been limited to top surface two-dimensional topography examination and chemical analysis in the literature. A more comprehensive characterization is needed to help understand the film formation process and the lubricating mechanism. This study demonstrated a multi-technique three-dimensional approach to characterize the IL-formed boundary films, including top surface morphology examination, cross section nanostructure characterization, and layered chemical analysis. Characterization was carried out on both ferrous and aluminum surfaces lubricated by an ammonium IL. The focused-ion-beam (FIB) technique enabled TEM/EDS examination on the cross section of the boundary film to provide direct measurement of the film thickness, visualization of the nanostructure, and analysis of composition. In addition, composition-depth profiles were generated using XPS aided by ion-sputtering to reveal the composition change at different levels of the boundary film to investigate the film formation process.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Overview of strategies for high-temperature creep and oxidation resistance of alumina-forming austenitic stainless steels

A family of creep-resistant, alumina-forming austenitic (AFA) stainless steel alloys is under development for structural use in fossil energy conversion and combustion system applications. The AFA alloys developed to date exhibit comparable creep-rupture lives to state-of-the-art advanced austenitic alloys, and superior oxidation resistance in the {approx}923 K to 1173 K (650 C to 900 C) temperature range due to the formation of a protective Al{sub 2}O{sub 3} scale rather than the Cr{sub 2}O{sub 3} scales that form on conventional stainless steel alloys. This article overviews the alloy design approaches used to obtain high-temperature creep strength in AFA alloys via considerations of phase equilibrium from thermodynamic calculations as well as microstructure characterization. Strengthening precipitates under evaluation include MC-type carbides or intermetallic phases such as NiAl-B2, Fe{sub 2}(Mo,Nb)-Laves, Ni{sub 3}Al-L1{sub 2}, etc. in the austenitic single-phase matrix. Creep, tensile, and oxidation properties of the AFA alloys are discussed relative to compositional and microstructural factors.

36 MATERIALS SCIENCE↗

Effect of Melt Temperature on Surface Films Formed on Molten AZ91D Alloy Protected by Graphite Powder

Graphite powder was adopted to prevent AZ91D alloy from oxidizing during melting and casting. The microstructure of the resultant surface films, formed at 933 K, 973 K, 1013 K, and 1053 K (660 °C, 700 °C, 740 °C, and 780 °C) for 30 minutes, was investigated by scanning electron microscopy, energy dispersive spectrometer, and X-ray diffraction, and the phase composition of the surface films was analyzed by the standard Gibbs free energy change of the reactions between the graphite powder, the alloy melt, and the ambient atmosphere. The effect and mechanism of melt temperature on the resultant surface films were also discussed. The results indicated that the surface films, of which the surface morphology comprised folds and wrinkles, were composed of a protective layer and MgF{sub 2} particles. The protective layer was contributive to the prevention of the molten alloy from oxidizing, and consisted of magnesium, oxygen, fluorine, carbon, and a small amount of aluminium existing in the form of MgO, MgF{sub 2}, C, and MgAl{sub 2}O{sub 4}. The layer thickness was 200 to 900 nm. The melt temperature may affect the surface films through the increased interaction between the graphite powder, the melt, and the ambient atmosphere. The oxygen content and thickness of the protective layer decreased and then increased, while the height of the folds increased with melt temperature.

36 MATERIALS SCIENCE↗

Parameter Calibration of GTN Damage Model and Formability Analysis of 22MnB5 in Hot Forming Process

Hot forming of high strength steel at elevated temperatures is an attractive technology to achieve the lightweight of vehicle body. The mechanical behavior of boron steel 22MnB5 strongly depends on the variation of temperature which makes the process design more difficult. In this paper, the Gurson–Tvergaard–Needleman (GTN) model is used to study the formability of 22MnB5 sheet at different temperatures. Firstly, the rheological behavior of 22MnB5 is analyzed through a series of hot tensile tests at a temperature range of 600-800 °C. Then, a detailed process to calibrate the damage parameters is given based on the response surface methodology and genetic algorithm method. The GTN model together with the damage parameters calibrated is then implemented to simulate the deformation and damage evolution of 22MnB5 in the process of high-temperature Nakazima test. The capability of the GTN model as a suitable tool to evaluate the sheet formability is confirmed by comparing experimental and calculated results. Finally, as a practical application, the forming limit diagram of 22MnB5 at 700 °C is constructed using the Nakazima simulation and Marciniak–Kuczynski (M–K) model, respectively. And the simulation integrated GTN model shows a higher reliability by comparing the predicted results of these two approaches with the experimental ones.

36 MATERIALS SCIENCE↗

Microstructure and Mechanical Properties of Spray-Formed 7075 Alloy During Retrogression

The mechanical properties, conductivity, microstructure, precipitation behavior and evolution process of elements and phases of spray-formed 7075 alloy during retrogression are studied by the tensile test, electric test, hardness test, transmission electron microscope (TEM), x-ray diffraction (XRD) analysis, electron-dispersive spectroscopy (EDS) and lattice parameter measurements. The results show that the mechanical properties and conductivity of the alloy can be effectively improved when treated at a suitable retrogression temperature and time. According to the TEM observations, XRD analysis, EDS and an accurate measurement of the lattice parameter, the redissolution of elements and precipitated phases can be readily observed. From the optimization selection of the RRA treatment for the 7075 alloy, the regularity of redissolution and precipitation of the elements and phases are evaluated. The ultimate tensile strength, yield strength, hardness, elongation and conductivity of the spray-formed 7075 alloy after preaging at 120 °C for 16 h, retrogression at 200 °C for 8 min and reaging at 120 °C for 24 h are 791, 736 MPa, 181 HBW, 8.5% and 22.6 MS/m, respectively.

36 MATERIALS SCIENCE↗

Refine your search to explore more results.