Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flexible electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Cumulative short-lived photofission product yields for nuclear forensic application

Experiments have long been carried out with linear accelerator (linac) produced bremsstrahlung X-rays to study high-energy photon-induced fission, known as “photofission”. One benefit of photofission, when compared with neutron-induced fission, is the ability to investigate fundamental physics of fission at excitation energies lower than what is possible with neutrons [1]. Absorption of an incident neutron results in a compound nucleus with an excitation energy at least equal to the neutron binding energy; thus, the lowest energy region of the fission barrier cannot be studied. Fission product yield distributions are dependent on the incident particle energy and the target nucleus mass. They are generally represented by a double-humped curve, with low and high mass “peaks” and an intermediate mass “valley”. As incident particle energy increases, the excitation energy of the nucleus increases, thereby increasing the overall yield of isotopes in the valley with respect to the two maxima or peaks of the fission product curve [3]. Photofission is most probable for incident photons around 14 MeV due to the giant dipole resonance. Induced photofission around this energy results in a fission product yield distribution that resembles 14 MeV DT neutron fission more than thermal or fast (500 keV) neutron fission. In post-detonation nuclear forensics, the peak-to-valley ratio of the fission product yield curve could be used for characterizing device type by providing an indication of the neutron energy spectrum that had induced fission (e.g., 500 keV vs. 14 MeV). The goal of this work is to improve nuclear data for isotopes of interest in nuclear forensics and special nuclear material (SNM) detection, specifically the fission product yield data via photofission experiments for the isotopes of 238U and 232Th. Photofission has been proposed as a less costly and more flexible production method for the valley isotopes that are representative of DT neutron fission product yield distributions, which would benefit nuclear forensics exercises in testing for analysis techniques. Natural uranium and thorium targets were irradiated with bremsstrahlung photons (nominal endpoint energies of 8, 14, and 20 MeV), generated via impingement of high-energy electrons on a tungsten electron-to-photon radiator. Gamma-ray spectroscopy was used to observe and identify the decay of the resulting fission products. The photofission yields of 102 fission products were measured for the set of the 238U and 232Th targets at the three bremsstrahlung X-ray endpoint energies 8, 14, and 20 MeV. These fragments included masses ranging from A=84 to A=144, with half-lives as short as 1.07 seconds.

07 ISOTOPE AND RADIATION SOURCES↗

SU-E-T-412: Evaluation of Tungsten-Based Functional Paper for Attenuation Device in Intraoperative Radiotherapy for Breast Cancer

Purpose: Intraoperative radiotherapy (IORT) with an electron beam is one of the accelerated partial breast irradiation methods that have recently been used in early-stage breast cancer. A protective acrylic resin-copper disk is inserted between the breast tissue and the pectoralis muscle to minimize the dose received by the posterior structures. However, a problem with this protective disk is that the surgical incision must be larger than the field size because the disk is manufactured from stiff and unyielding materials. The purpose of this study was to assess the applicability of a new tungsten-based functional paper (TFP) as an alternative to the existing protective disk in IORT. Methods: The newly introduced TFP (Toppan Printing Co., Ltd., Tokyo, JP) is anticipated to become a useful device that is lead-free, light, flexible, and easily processed. The radiation shielding performance of TFP was verified by experimental measurements and Monte Carlo (MC) simulations using PHITS code. The doses transmitted through the protective disk or TFP were measured on a Mobetron mobile accelerator. The same geometries were then reproduced, and the dose distributions were simulated by the MC method. Results: The percentages of transmitted dose relative to the absence of the existing protective disk were lower than 2% in both the measurements and MC simulations. In the experimental measurements, the percentages of transmitted dose for a 9 MeV electron beam were 48.1, 2.3, and 0.6% with TFP thicknesses of 1.9, 3.7, and 7.4 mm, respectively. The percentages for a 12 MeV were 76.0, 49.3, 20.0, and 5.5% with TFP thicknesses of 1.9, 3.7, 7.4, and 14.8 mm, respectively. The results of the MC simulation showed a slight dose increase at the incident surface of the TFP caused by backscattered radiation. Conclusion: The results indicate that a small-incision procedure may be possible by the use of TFP.

60 APPLIED LIFE SCIENCES↗

Enhancing e-waste estimates: Improving data quality by multivariate Input–Output Analysis

Highlights: • A multivariate Input–Output Analysis method for e-waste estimates is proposed. • Applying multivariate analysis to consolidate data can enhance e-waste estimates. • We examine the influence of model selection and data quality on e-waste estimates. • Datasets of all e-waste related variables in a Dutch case study have been provided. • Accurate modeling of time-variant lifespan distributions is critical for estimate. - Abstract: Waste electrical and electronic equipment (or e-waste) is one of the fastest growing waste streams, which encompasses a wide and increasing spectrum of products. Accurate estimation of e-waste generation is difficult, mainly due to lack of high quality data referred to market and socio-economic dynamics. This paper addresses how to enhance e-waste estimates by providing techniques to increase data quality. An advanced, flexible and multivariate Input–Output Analysis (IOA) method is proposed. It links all three pillars in IOA (product sales, stock and lifespan profiles) to construct mathematical relationships between various data points. By applying this method, the data consolidation steps can generate more accurate time-series datasets from available data pool. This can consequently increase the reliability of e-waste estimates compared to the approach without data processing. A case study in the Netherlands is used to apply the advanced IOA model. As a result, for the first time ever, complete datasets of all three variables for estimating all types of e-waste have been obtained. The result of this study also demonstrates significant disparity between various estimation models, arising from the use of data under different conditions. It shows the importance of applying multivariate approach and multiple sources to improve data quality for modelling, specifically using appropriate time-varying lifespan parameters. Following the case study, a roadmap with a procedural guideline is provided to enhance e-waste estimation studies.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High Moisture Barrier with Synergistic Combination of SiO x and Polyelectrolyte Nanolayers

Abstract The lifespan of most organic electronics, and many types of food, depend on the oxygen and moisture barrier of the packaging materials. Despite exhibiting excellent oxygen barrier and being relatively easy to produce, polyelectrolyte multilayer nanocoatings (PEM) show limited moisture barrier. SiO x thin films can exhibit good moisture barrier, but rigidity that leads to cracking is a challenge for flexible packaging. In this work, layer‐by‐layer assembled PEM coatings are paired with inorganic SiO x to form a three‐layer sandwich‐type moisture barrier. The barrier property of this organic/inorganic/organic structure is an order of magnitude better than any individual component or other combination thereof. This behavior is attributed to the underlying PEM layer smoothing the substrate surface and the top PEM layer eliminating defects in the underlying SiO x . This study provides a new twist in the development of flexible films with exceptional moisture barrier.

Qin, Shuang↗

High electrochemical performance bendable Li secondary batteries based on a three-dimensional metal foam-type current collector

Highlights: • 3D structured metal foam increases the surface area for redox reaction. • 3D structured metal foam enhances the electrical conductivity. • The Ni-Cr alloy foam exhibit a high areal capacity of 3.5 mAh cm{sup −2} at a 0.2C. • The Ni-Cr alloy foam exhibit a low charge transfer resistance of 6 Ω. - Abstract: Bendable lithium secondary batteries have many limitations, including low electrochemical performances and poor mechanical flexibility. Here, we bendable pouch batteries are fabricated using LiFePO{sub 4}/C as the active material and three-dimensional Nickel-Chromium alloy metal foam as the current collector of positive electrodes. The advantages of using the three-dimensional structured metal foam include a high surface area for the redox reaction, high electronic conductivity, and short diffusion length for the lithium ion. We demonstrate the use of bendable lithium secondary batteries with a high areal capacity of about 3.5 mAh cm{sup −2} at C-rate of 0.2, a high capacity retention rate in cycle life behavior, and a greatly low charge transfer resistance of around 6–8 Ω. Moreover, our bendable pouch batteries can be repeatedly bent to radii of 12.5 and 2.5 mm for several hundred times without fractures in the electrode and capacity fading.

36 MATERIALS SCIENCE↗

Perovskite Quantum Dot Solar Cells: Mapping Interfacial Energetics for Improving Charge Separation

Colloidal halide perovskite nanocrystals or quantum dots (QDs) show similar defect tolerance as thin film perovskite materials with added nanoscale phenomena. Perovskite QD solar cells have demonstrated efficiencies of 16.6%, greater than that of any other QD material system. While the efficiency lags behind the best thin-film perovskite devices, these solar cells could have advantages over the thin-film versions in terms of processability, phase stability, and high open-circuit voltages. However, some operating principles behind perovskite quantum dot device stacks and the associated electric field properties are still unknown. Here, we characterize the junction structure within perovskite QD solar cells, by exposing functioning cross-sections and using nanometer-scale Kelvin probe force microscopy to offer insight into the selection and performance of charge selective contacts. We also evaluated various solar cell device architectures with different selective contacts to isolate the role of each junction in device performance. We show that in high-performance n-i-p architectures, both electron- and hole-transport layer (HTL) interfaces possess a strong electric field, but in the case of the inverted p-i-n architecture, we find that high interfacial recombination at the HTL/QD junction is responsible for subpar device performance. Perovskite QD and thin film materials can synergistically be combined to offer more design flexibility in PV devices, and here we demonstrate that the interface between perovskite thin films and QDs are relatively benign and amenable for synergistic device design.

14 SOLAR ENERGY↗

High-harmonic generation from solids

We report that high-harmonic generation in atomic gases has been studied for decades, and has formed the basis of attosecond science. Observation of high-order harmonics from bulk crystals was, however, reported much more recently, in 2010. This Review surveys the subsequent efforts aimed at understanding the microscopic mechanism of solid-state harmonics in terms of what it can tell us about the electronic structure of the source materials, how it can be used to probe driven ultrafast dynamics and its prospects for novel, compact short-wavelength light sources. Lastly, although most of this work has focused on bulk materials as the source, recent experiments have investigated high-harmonic generation from engineered structures, which could form flexible platforms for attosecond photonics.

36 MATERIALS SCIENCE↗

Estimations of Mo X-pinch plasma parameters on QiangGuang-1 facility by L-shell spectral analyses

Plasma parameters of molybdenum (Mo) X-pinches on the 1-MA QiangGuang-1 facility were estimated by L-shell spectral analysis. X-ray radiation from X-pinches had a pulsed width of 1 ns, and its spectra in 2–3 keV were measured with a time-integrated X-ray spectrometer. Relative intensities of spectral features were derived by correcting for the spectral sensitivity of the spectrometer. With an open source, atomic code FAC (flexible atomic code), ion structures, and various atomic radiative-collisional rates for O-, F-, Ne-, Na-, Mg-, and Al-like ionization stages were calculated, and synthetic spectra were constructed at given plasma parameters. By fitting the measured spectra with the modeled, Mo X-pinch plasmas on the QiangGuang-1 facility had an electron density of about 10{sup 21} cm{sup −3} and the electron temperature of about 1.2 keV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NELS 2.0 - A general system for enterprise wide information management

NELS, the NASA Electronic Library System, is an information management tool for creating distributed repositories of documents, drawings, and code for use and reuse by the aerospace community. The NELS retrieval engine can load metadata and source files of full text objects, perform natural language queries to retrieve ranked objects, and create links to connect user interfaces. For flexibility, the NELS architecture has layered interfaces between the application program and the stored library information. The session manager provides the interface functions for development of NELS applications. The data manager is an interface between session manager and the structured data system. The center of the structured data system is the Wide Area Information Server. This system architecture provides access to information across heterogeneous platforms in a distributed environment. There are presently three user interfaces that connect to the NELS engine; an X-Windows interface, and ASCII interface and the Spatial Data Management System. This paper describes the design and operation of NELS as an information management tool and repository.

Smith, Stephanie L.↗

Simulation of thermal ionization in a dense helium plasma by the Feynman path integral method

The region of equilibrium states is studied where the quantum nature of the electron component and a strong nonideality of a plasma play a key role. The problem of negative signs in the calculation of equilibrium averages a system of indistinguishable quantum particles with a spin is solved in the macroscopic limit. It is demonstrated that the calculation can be conducted up to a numerical result. The complete set of symmetrized basis wave functions is constructed based on the Young symmetry operators. The combinatorial weight coefficients of the states corresponding to different graphs of connected Feynman paths in multiparticle systems are calculated by the method of random walk over permutation classes. The kinetic energy is calculated using a viral estimator at a finite pressure in a statistical ensemble with flexible boundaries. Based on the methods developed in the paper, the computer simulation is performed for a dense helium plasma in the temperature range from 30000 to 40000 K. The equation of state, internal energy, ionization degree, and structural characteristic of the plasma are calculated in terms of spatial correlation functions. The parameters of a pseudopotential plasma model are estimated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Signal processing and spectral modeling for the BeEST experiment

The Beryllium Electron capture in Superconducting Tunnel junctions (BeEST) experiment searches for evidence of heavy neutrino mass eigenstates in the nuclear electron capture decay of 7 Be by precisely measuring the recoil energy of the 7 Li daughter. In Phase III, the BeEST experiment has been scaled from a singl superconducting tunnel junction (STJ) sensor to a 36-pixel array to increase sensitivity and mitigate gamma-induced backgrounds. Phase III also uses a new continuous data acquisition system that greatly increases the flexibility for signal processing and data cleaning. Here, we have developed procedures for signal processing and spectral fitting that are sufficiently robust to be automated for large datasets. Furthermore, this article presents the optimized procedures before unblinding the majority of the Phase III dataset to search for physics beyond the standard model.

6 ≤ A ≤ 19↗

An Ultra-long Life, High-performance, Flexible Li-CO2Battery Based on Multifunctional Carbon Electrocatalysts

Integrating CO2 utilization and renewable energy delivery/storage, the rechargeable Li–CO2 battery has been considered as a promising candidate for next-generation secondary batteries. However, high-performance catalyst(s) for efficient formation and decomposition of the discharge product, Li2CO3, are an imperative part of a Li–CO2 battery. The development of flexible Li–CO2 batteries extends their applications into compliant and wearable devices/systems, but at the same time imposes a big challenge for battery fabrication and lifetime enhancement. In this study, a rechargeable quasi-solidus flexible Li–CO2 battery was designed and fabricated using highly active N,S-doped carbon nanotubes (N,S-doped CNTs) as the cathode catalyst, and a smart polymer gel as the flexible electrolyte. This newly-developed flexible Li–CO2 battery exhibited a capacity as high as 23560 mAh g−1 based on the catalyst mass and an ultra-long lifetime of up to 538 cycles with excellent mechanical flexibility. This work provides a platform for the design and development of high-performance flexible Li–CO2 batteries from low-cost, earth-abundant, carbon-based multifunctional cathode catalysts.

Superior stability↗

First results from the new RIKEN superconducting electron cyclotron resonance ion source (invited)

The next generation heavy ion accelerator facility, such as the RIKEN radio isotope (RI) beam factory, requires an intense beam of high charged heavy ions. In the past decade, performance of the electron cyclotron resonance (ECR) ion sources has been dramatically improved with increasing the magnetic field and rf frequency to enhance the density and confinement time of plasma. Furthermore, the effects of the key parameters (magnetic field configuration, gas pressure, etc.) on the ECR plasma have been revealed. Such basic studies give us how to optimize the ion source structure. Based on these studies and modern superconducting (SC) technology, we successfully constructed the new 28 GHz SC-ECRIS, which has a flexible magnetic field configuration to enlarge the ECR zone and to optimize the field gradient at ECR point. Using it, we investigated the effect of ECR zone size, magnetic field configuration, and biased disk on the beam intensity of the highly charged heavy ions with 18 GHz microwaves. In this article, we present the structure of the ion source and first experimental results with 18 GHz microwave in detail.

43 PARTICLE ACCELERATORS↗

Cs X Si 15 P 21 ( X = Sn or Pb): Polar Noncentrosymmetric Si–P Frameworks Stabilized by Covalent X –P Bonding

Metal silicon phosphides composed of earth-abundant Si and P tend to exhibit semiconducting properties and adopt diverse crystal structures with relatively small additions of structure-directing elements. The potential of silicon phosphide materials in nonlinear optical applications has been hindered by the inability to systematically produce noncentrosymmetric structures with such a flexible framework. Here, in this work, two isostructural compounds with a novel noncentrosymmetric structure were made possible by the inclusion of elements with stereochemically active lone pairs (Sn 2+ and Pb 2+ ). The structures were determined through single-crystal and synchrotron powder X-ray diffraction. Analysis of chemical bonding in real space through the electron localization function revealed stereochemically active Pb 2+ and Sn 2+ species in a trigonal pyramidal coordination with {Pb/Sn}–P bonds. Such covalent bonding between Pb and P is quite uncommon in extended solids and has been reported in a few rare instances. Band structure calculations and linear optical measurements confirm the semiconducting nature of Cs X Si 15 P 21 ( X = Sn or Pb). The synthesis was optimized to yield high-purity polycrystalline samples. The nonlinear optical properties show promising second-harmonic generation (SHG) coefficients from the Kurtz–Perry method. First-principles calculations of the nonlinear optical properties support the experimentally determined SHG values and provide moderate values of birefringence, suggesting Cs X Si 15 P 21 could be phase-matchable and practical nonlinear optical materials in the mid-IR region.

crystal structure↗

Water–Hydrocarbon Interactions in Anionic Pyrene Monohydrate

Interactions between water and polycyclic aromatic hydrocarbons are essential in many aspects of chemistry, from interstellar and atmospheric processes to interfacial hydrophobicity and wetting phenomena. Despite their growing importance, the intermolecular potentials of the water-hydrocarbon interactions are underdeveloped compared to water-water potentials, and there are similarly few experimental probes that are sensitive to the details of the water-hydrocarbon potential. We present a combined experimental and computational study of anionic pyrene monohydrate, one of the simplest water/hydrocarbon clusters. The action spectrum in the OH region of the mass-selected cluster ion provides a rigorous benchmark for intermolecular potentials and computational methodologies. We identify missing intermolecular interactions and shortcomings in conventional dynamics calculations by comparing experimental data to density functional theory and classical molecular dynamics calculations. Kinetic trapping is prevalent, even for one water molecule and one pyrene molecule, leading to slow equilibration in conventional molecular dynamics calculations, even on nanosecond timescales and at low temperatures (50 K). At constant energy, temperature fluctuations for the pair of molecules are substantial. Immersing the system in a bath of soft spheres and employing parallel tempering alleviates kinetic trapping and dampens temperature fluctuations, bringing the system closer to the thermodynamic limit. With such augmented sampling, a simple, flexible water model reproduces the linewidth and the asymmetric broadening of the symmetric OH stretching mode, which we assign to spectral diffusion. In the OH stretching region, dynamics calculations predict a more intense antisymmetric peak than experiments observe but do not predict the bimodal split symmetric peak that the experiments show. Furthermore, our work suggests that electronic polarization, missing in the empirical force field, is responsible for the first discrepancy and that quantum nuclear effects, captured neither in density functional theory nor in classical dynamics, may be responsible for the second.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Data Science-Driven Analysis of Substrate-Permissive Diketopiperazine Reverse Prenyltransferase NotF: Applications in Protein Engineering and Cascade Biocatalytic Synthesis of (-)-Eurotiumin A

Prenyltransfer is an early-stage carbon-hydrogen bond (C-H) functionalization prevalent in the biosynthesis of a diverse array of biologically active bacterial, fungal, plant, and metazoan diketopiperazine (DKP) alkaloids. Toward the development of a unified strategy for biocatalytic construction of prenylated DKP indole alkaloids, we sought to identify and characterize a substrate-permissive C2 reverse prenyltransferase (PT). As the first tailoring event within the biosynthesis of cytotoxic notoamide metabolites, PT NotF catalyzes C2 reverse prenyltransfer of brevianamide F. Solving a crystal structure of NotF (in complex with native substrate and prenyl donor mimic dimethylallyl S-thiolodiphosphate (DMSPP)) revealed a large, solvent-exposed active site, intimating NotF may possess a significantly broad substrate scope. To assess the substrate selectivity of NotF, we synthesized a panel of 30 sterically and electronically differentiated tryptophanyl DKPs, the majority of which were selectively prenylated by NotF in synthetically useful conversions (2 to > 99%). Quantitative representation of this substrate library and development of a descriptive statistical model provided insight into the molecular origins of NotF's substrate promiscuity. This approach enabled the identification of key substrate descriptors (electrophilicity, size, and flexibility) that govern the rate of NotF-catalyzed prenyltransfer, and the development of an "induced fit docking (IFD)-guided" engineering strategy for improved turnover of our largest substrates. We further demonstrated the utility of NotF in tandem with oxidative cyclization using flavin monooxygenase, BvnB. This one-pot, in vitro biocatalytic cascade enabled the first chemoenzymatic synthesis of the marine fungal natural product, (-)-eurotiumin A, in three steps and 60% overall yield.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural insights into redox signal transduction mechanisms in the control of nitrogen fixation by the NifLA system

NifL is a conformationally dynamic flavoprotein responsible for regulating the activity of the σ 54 -dependent activator NifA to control the transcription of nitrogen fixation (nif) genes in response to intracellular oxygen, cellular energy, or nitrogen availability. The NifL-NifA two-component system is the master regulatory system for nitrogen fixation. NifL serves as a sensory protein, undergoing signal-dependent conformational changes that modulate its interaction with NifA, forming the NifL–NifA complex, which inhibits NifA activity in conditions unsuitable for nitrogen fixation. While NifL-NifA regulation is well understood, these conformationally flexible proteins have eluded previous attempts at structure determination. In work described here, we advance a structural model of the NifL dimer supported by a combination of scattering techniques and mass spectrometry (MS)-coupled structural analyses that report on the average structure in solution. Using a combination of small angle X-ray scattering-derived electron density maps and MS-coupled surface labeling, we investigate the conformational dynamics responsible for NifL oxygen and energy responses. Our results reveal conformational differences in the structure of NifL under reduced and oxidized conditions that provide the basis for a model for modulating NifLA complex formation in the regulation of nitrogen fixation in response to oxygen in the model diazotroph,Azotobacter vinelandii.

59 BASIC BIOLOGICAL SCIENCES↗

SU-E-T-223: Computed Radiography Dose Measurements of External Radiotherapy Beams

Purpose: To obtain quantitative, two-dimensional dose measurements of external radiotherapy beams with a computed radiography (CR) system and to derive volume correction factors for ionization chambers in small fields. Methods: A commercial Kodak ACR2000i CR system with Kodak Flexible Phosphor Screen HR storage foils was used. Suitable measurement conditions and procedures were established. Several corrections were derived, including image fading, length-scale corrections and long-term stability corrections. Dose calibration curves were obtained for cobalt, 4 MV, 8 MV and 25 MV photons, and for 10 MeV, 15 MeV and 18 MeV electrons in a water phantom. Inherent measurement inhomogeneities were studied as well as directional dependence of the response. Finally, 2D scans with ionization chambers were directly compared to CR measurements, and volume correction factors were derived. Results: Dose calibration curves (0.01 Gy to 7 Gy) were obtained for multiple photon and electron beam qualities. For each beam quality, the calibration curves can be described by a single fit equation over the whole dose range. The energy dependence of the dose response was determined. The length scale on the images was adjusted scan-by-scan, typically by 2 percent horizontally and by 3 percent vertically. The remaining inhomogeneities after the system’s standard calibration procedure were corrected for. After correction, the homogeneity is on the order of a few percent. The storage foils can be rotated by up to 30 degrees without a significant effect on the measured signal. First results on the determination of volume correction factors were obtained. Conclusion: With CR, quantitative, two-dimensional dose measurements with a high spatial resolution (sub-mm) can be obtained over a large dose range. In order to make use of these advantages, several calibrations, corrections and supporting measurements are needed. This work was funded by the European Metrology Research Programme (EMRP) project HLT09 MetrExtRT Metrology for Radiotherapy using Complex Radiation Fields.

60 APPLIED LIFE SCIENCES↗

Refine your search to explore more results.