Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “entropy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Temperature dependence of corrosion behavior of a dual-phase Fe 50 Mn 30 Co 10 Cr 10 high entropy alloy in supercritical water at 380–650 °C

Corrosion behavior of a dual-phase Fe 50 Mn 30 Co 10 Cr 10 HEA subjected to supercritical water at different temperatures was investigated. Both weight gain and oxide film thickness increased with increasing temperatures. An outer layer with polyhedral MnFe 2 O 4 particles and an inner layer containing a mixture of CrMn 1.5 O 4 and Fe 3 O 4 were formed at 380 °C. Mn 2 O 3 outer and CrMn 1.5 O 4 inner layers developed at 550 and 650 °C, but the loose granular Mn 2 O 3 particles at 550 °C transformed into a compact oxide film at 650 °C. Besides, Cr 2 O 3 oxide particles were observed along the grain boundaries. Finally, the corrosion mechanism at different temperatures was also discussed.

36 MATERIALS SCIENCE↗

Identification of pressure points in modern power systems using transfer entropy

Power shortages disrupt daily life, economic activity, and essential services. In modern power systems, weather is an increasingly important driver of reliability: high temperatures raise demand and limit transmission capacity, and calm or cloudy periods reduce wind and solar supply. Using a data-driven analysis, this study identifies grid infrastructure whose operating patterns help predict power shortages. The results show that reliability risks often emerge from interacting stresses across generation, transmission, and demand, rather than from single bottlenecks. By clarifying how system stress propagates through the grid, this diagnostic perspective helps explain why shortages occur under specific conditions and can complement traditional planning and operational tools to support adaptive reliability strategies, targeted monitoring, and coordinated infrastructure investments.

power systems↗

Machine-learning and first-principles investigation of lightweight medium-entropy alloys for hydrogen-storage applications

The transition to a low-carbon economy demands efficient and sustainable energy-storage solutions, with hydrogen emerging as a promising clean-energy carrier and with metal hydrides recognized for their hydrogen-storage capacity. Here, we leverage machine learning (ML) to predict hydrogen-to-metal (H/M) ratios and solution energy by incorporating thermodynamic parameters and local lattice distortion (LLD) as key features. Our best-performing ML model provides improvements to H/M ratios and solution energies over a broad class of medium-entripy alloys (easily extendable to multi-principal-element alloys), such as Ti–Nb-X (X = Mo, Cr, Hf, Ta, V, Zr) and Co–Ni-X (X = Al, Mg, V). Ti–Nb–Mo alloys reveal compositional effects in H-storage behavior, in particular Ti, Nb, and V enhance H-storage capacity, while Mo reduces H/M and hydrogen weight percent by 40–50 %. We attributed results in molybdenum-rich alloys to slow hydrogen kinetics, as validated by our pressure-composition-temperature (PCT) isotherm experiments on pure Ti and Ti 5 Mo 95 alloys. Density functional theory (DFT) and molecular dynamics (MD) simulations also confirm that Ti and Nb promote H diffusion, whereas Mo hinders it, highlighting the interplay between electronic structure, lattice distortions, and hydrogen uptake. Notably, our Gradient Boosting Regression model identifies LLD as a critical factor in H/M predictions. Here, to aid material selection, we present two periodic tables illustrating elemental effects on (a) H 2 wt% and (b) solution energy, derived from ML, and provide a reference for identifying alloying elements that enhance hydrogen solubility and storage.

08 HYDROGEN↗

Influence of Bridgman solidification on microstructures and magnetic behaviors of a non-equiatomic FeCoNiAlSi high-entropy alloy

The non-equiatomic FeCoNiAlSi alloy is prepared by the Bridgman solidification (BS) technique at different withdrawal velocities (V = 30, 100, and 200 μm/s). Various characterization techniques have been used to study the microstructure and crystal orientation. The morphological evolutions accompanying the crystal growth of the alloy prepared at different withdrawal velocities are nearly the same, from equiaxed grains to columnar crystals. The transition of coercivity is closely related to the local microstructure, while the saturation magnetization changes little at different sites. The coercivity can be significantly reduced from the equiaxed grain area to the columnar crystal area when the applied magnetic field direction is parallel to the crystal growth direction, no matter what is the withdrawal velocity. As a result, the alloy possesses magnetic anisotropy when the applied magnetic field is in different directions.

36 MATERIALS SCIENCE↗

On the onset of deformation twinning in the CrFeMnCoNi high-entropy alloy using a novel tensile specimen geometry

Deformation-induced nanoscale twinning is one of the mechanisms responsible for the excellent combination of strength and fracture toughness of the single-phase, face-centered cubic CrMnFeCoNi (Cantor) alloy, especially at cryogenic temperatures. In this work, we use a novel, modified dogbone geometry that allows the sampling of varying stress and strain regions within a single tensile specimen to characterize the onset of twinning in CrMnFeCoNi at 293 K, 198 K and 77 K. Electron backscatter diffraction (EBSD) and backscattered electron (BSE) imaging revealed the presence of deformation nano-twins in regions of the samples that had experienced plastic strains of ~25% at 293 K, ~16% at 198 K, and ~8% at 77 K, which are similar to the threshold strains described by Laplanche et al. ( Acta Mater. 118, 2016, 152–163). From these strains we estimate that the critical tensile stress for the onset of twinning in this alloy is on the order of 750 MPa.

36 MATERIALS SCIENCE↗

Structural and magnetic transitions of CoFeMnNiAl high-entropy alloys caused by composition and annealing

Tailoring magnetic behavior by composition and annealing is an effective way. The phase transition from the face-centered-cubic (FCC) to B2 structure influenced by the Al content on the CoFeMnNiAl x alloys leads to the enhanced magnetization. However, the excessive Al addition in the B2-structured alloys impairs the magnetization. The phase transformation caused by annealing also indicates that the saturation magnetization of the alloy depends on the volume fraction of the B2 phase, and a higher content of the B2 phase is beneficial to the large saturation magnetization. Ab initio calculations are used to explain the magnetic behavior of the present HEAs and the effects of phase structures on magnetic characteristics. The phase stability of the CoFeMnNiAl x alloy is thoroughly studied by both the existing phase-formation empirical criteria and annealing. Here, the existing empirical criteria used to predict the phase formation are not universal. However, combining the ΔH mix -δ relation and the φ value, whether the single disordered solid-solution phase is formed can be preliminarily predicted.

36 MATERIALS SCIENCE↗

Structure and magnetism of AlCoCrCuFeNi high-entropy alloy

We report on the investigation of magnetic and structural properties of AlCoCrCuFeNi, which is known to crystallize in a dual phase solid solution: the face-centred cubic (FCC) or the body-centred cubic (BCC). The results of neutron (NPD) and synchrotron powder diffraction (SXRD) allow to partially resolve magnetic information coming from BCC and FCC phases, which is impossible in the bulk magnetic measurements. Electron diffraction (PED) revealed that AlCoCrCuFeNi forms dendritic microstructure with the Cu-rich FCC phase and the Ni-rich BCC phase. Lattice parameters obtained from PED method are in good agreement with parameters obtained after refinement on the basis of powder X-ray diffraction measurements. The local crystal and electronic structure around Co was studied using Co K X-ray Absorption Spectroscopy (XAS). The magnetic measurements show that AlCoCrCuFeNi reveal a ferromagnetic transition at about 330K and displays magnetic hysteresis loop at the room temperature. Results from NPD suggest that the magnetic moment is mostly located in the BCC subsystem. The alloy shows soft magnetic properties. Saturated magnetizations (M s ), remanence ratio (M r /M s ) and coercivity (H c ) of the cast are estimated to be 45.10emu/g, 5.1% and 56 Oe at 300K, respectively. Finally, the BCC-FCC phase transformation up to 673K (400°C) was investigated using temperature dependent NPD, where a possible second BCC phase was identified.

36 MATERIALS SCIENCE↗

Irradiation response of innovatively engineered metastable TRIP high entropy alloy

For this work, properties and radiation responses of a metastable high alloy (HEA) exhibiting the transformation induced plasticity (TRIP) effect were studied. Innovative engineering used to manufacture this HEA has shown superior mechanical and corrosion properties in 3.5% NaCl than most advanced stainless steels. The microstructural evolution and corresponding mechanical response after irradiation have been evaluated using detailed transmission electron microscopy, and nanoindentation. The study shows a change in metastability of the alloy with irradiation via a recovery mechanism, where the irradiation-induced transformation is reversed by the temperature-induced transformation, thereby introducing the concept of self-healing, made possible due to the TRIP behavior of HEA.

36 MATERIALS SCIENCE↗

Refine your search to explore more results.