Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic component”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

PP composites with Hybrid Nanofillers: NTC phenomenon

Electric conductive plastic composites have a wide potential for commercial applications, some examples are EMI shielding housings and components in automotive industry and in consumer electronics, equipments in health care sector and fuel cell components. A phenomenon in conductive composites, especially in composites with carbon based fillers, is change of thermal induced change in conductivity as a result of morphological transitions. Usually the observed changes are practically irreversible. The phenomenon may cause increasing resistivity, usually called as 'positive temperature coefficient' (PTC) or decreasing resistivity, called 'negative temperature coefficient' (NTC), where the new morphology created by heat treatment is more favorable for electric conductivity compared to the original state. The existence of NTC is a sing of the lost potential in material design and processing. Therefore detailed information about the phenomenon gives us tools to develop high performance conductive materials. It this paper we discuss about NTC phenomenon observed in PP composites with CNT or in-situ synthesized CNT-PANi hybrid nanofiller with an amphiphilic dispersing agent. The goal of the paper is not to present a comprehensive model of this phenomenon; we present some experimental results which may be related to polymer-filler interactions. These details are a part of this complicated phenomenon.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High-voltage MIS-gated GaN transistors

Transistors with a high electron mobility based on AlGaN/GaN epitaxial heterostructures are promising component types for creating high-power electronic devices of the next generation. This is due both to a high charge-carrier mobility in the transistor channel and a high electric durability of the material making it possible to achieve high breakdown voltages. For use in power switching devices, normally off GaN transistors operating in the enrichment mode are required. To create normally off GaN transistors, the subgate region on the basis of p-GaN doped with magnesium is more often used. However, optimization of the p-GaN epitaxial-layer thickness and doping level makes it possible to achieve a threshold voltage close to V{sub th} = +2 V for the on-mode of GaN transistors. In this study, it is shown that the use of a subgate MIS (metal–insulator–semiconductor) structure involved in p-GaN transistors results in an increase in the threshold voltage for the on-mode to V{sub th} = +6.8 V, which depends on the subgate-insulator thickness in a wide range. In addition, it is established that the use of the MIS structure results in a decrease in the initial transistor current and the gate current in the on mode, which enables us to decrease the energy losses when controlling powerful GaN transistors.

36 MATERIALS SCIENCE↗

High Efficiency, Clean Combustion

Energy use in trucks has been increasing at a faster rate than that of automobiles within the U.S. transportation sector. According to the Energy Information Administration (EIA) Annual Energy Outlook (AEO), a 23% increase in fuel consumption for the U.S. heavy duty truck segment is expected between 2009 to 2020. The heavy duty vehicle oil consumption is projected to grow between 2009 and 2050 while light duty vehicle (LDV) fuel consumption will eventually experience a decrease. By 2050, the oil consumption rate by LDVs is anticipated to decrease below 2009 levels due to CAFE standards and biofuel use. In contrast, the heavy duty oil consumption rate is anticipated to double. The increasing trend in oil consumption for heavy trucks is linked to the vitality, security, and growth of the U.S. economy. An essential part of a stable and vibrant U.S. economy is a productive U.S. trucking industry. Studies have shown that the U.S. gross domestic product (GDP) is strongly correlated to freight transport. Over 90% of all U.S. freight tonnage is transported by diesel power and over 75% is transported by trucks. Given the vital role that the trucking industry plays in the economy, improving the efficiency of the transportation of goods was a central focus of the Cummins High Efficient Clean Combustion (HECC) program. In a commercial vehicle, the diesel engine remains the largest source of fuel efficiency loss, but remains the greatest opportunity for fuel efficiency improvements. In addition to reducing oil consumption and the dependency on foreign oil, this project will mitigate the impact on the environment by meeting US EPA 2010 emissions regulations. Innovation is a key element in sustaining a U.S. trucking industry that is competitive in global markets. Unlike passenger vehicles, the trucking industry cannot simply downsize the vehicle and still transport the freight with improved efficiency. The truck manufacturing and supporting industries are faced with numerous challenges to reduce oil consumption and greenhouse gases, meet stringent emissions regulations, provide customer value, and improve safety. The HECC program successfully reduced engine fuel consumption and greenhouse gases while providing greater customer valve. The US EPA 2010 emissions standard poses a significant challenge for developing clean diesel powertrains that meet the DoE Vehicle Technologies Multi-Year Program Plan (MYPP) for fuel efficiency improvement while remaining affordable. Along with exhaust emissions, an emphasis on heavy duty vehicle fuel efficiency is being driven by increased energy costs as well as the potential regulation of greenhouse gases. An important element of the success of meeting emissions while significantly improving efficiency is leveraging Cummins component technologies such as fuel injection equipment, aftertreatment, turbomahcinery, electronic controls, and combustion systems. Innovation in component technology coupled with system integration is enabling Cummins to move forward with the development of high efficiency clean diesel products with a long term goal of reaching a 55% peak brake thermal efficiency for the engine plus aftertreatment system. The first step in developing high efficiency clean products has been supported by the DoE co-sponsored HECC program. The objectives of the HECC program are: (1) To design and develop advanced diesel engine architectures capable of achieving US EPA 2010 emission regulations while improving the brake thermal efficiency by 10% compared to the baseline (a state of the art 2007 production diesel engine). (2) To design and develop components and subsystems (fuel systems, air handling, controls, etc) to enable construction and development of multi-cylinder engines. (3) To perform an assessment of the commercial viability of the newly developed engine technology. (4) To specify fuel properties conducive to improvements in emissions, reliability, and fuel efficiency for engines using high-efficiency clean combustion (HECC) technologies. To demonstrate the technology is compatible with B20 (biodiesel). (5) To further improve the brake thermal efficiency of the engine as integrated into the vehicle. To demonstrate robustness and commercial viability of the HECC engine technology as integrated into the vehicles. The Cummins HECC program supported the Advanced Combustion Engine R&D and Fuels Technology initiatives of the DoE Vehicle Technologies Multi-Year Program Plan (MYPP). In particular, the HECC project goals enabled the DoE Vehicle Technologies Program (VTP) to meet energy-efficiency improvement targets for advanced combustion engines suitable for passenger and commercial vehicles, as well as addressing technology barriers and R&D needs that are common between passenger and commercial vehicle applications of advanced combustion engines.

09 BIOMASS FUELS↗

Printed assemblies of ultrathin, microscale inorganic light emitting diodes for deformable and semitransparent displays

Described herein are printable structures and methods for making, assembling and arranging electronic devices. A number of the methods described herein are useful for assembling electronic devices where one or more device components are embedded in a polymer which is patterned during the embedding process with trenches for electrical interconnects between device components. Some methods described herein are useful for assembling electronic devices by printing methods, such as by dry transfer contact printing methods. Also described herein are GaN light emitting diodes and methods for making and arranging GaN light emitting diodes, for example for display or lighting systems.

42 ENGINEERING↗

Printed assemblies of ultrathin, microscale inorganic light emitting diodes for deformable and semitransparent displays

Described herein are printable structures and methods for making, assembling and arranging electronic devices. A number of the methods described herein are useful for assembling electronic devices where one or more device components are embedded in a polymer which is patterned during the embedding process with trenches for electrical interconnects between device components. Some methods described herein are useful for assembling electronic devices by printing methods, such as by dry transfer contact printing methods. Also described herein are GaN light emitting diodes and methods for making and arranging GaN light emitting diodes, for example for display or lighting systems.

36 MATERIALS SCIENCE↗

Printed assemblies of ultrathin, microscale inorganic light emitting diodes for deformable and semitransparent displays

Described herein are printable structures and methods for making, assembling and arranging electronic devices. A number of the methods described herein are useful for assembling electronic devices where one or more device components are embedded in a polymer which is patterned during the embedding process with trenches for electrical interconnects between device components. Some methods described herein are useful for assembling electronic devices by printing methods, such as by dry transfer contact printing methods. Also described herein are GaN light emitting diodes and methods for making and arranging GaN light emitting diodes, for example for display or lighting systems.

42 ENGINEERING↗

Carbon-Nanotube-Based Thermoelectric Materials and Devices

Conversion of waste heat to voltage has the potential to significantly reduce the carbon footprint of a number of critical energy sectors, such as the transportation and electricity-generation sectors, and manufacturing processes. Thermal energy is also an abundant low-flux source that can be harnessed to power portable/wearable electronic devices and critical components in remote off-grid locations. As such, a number of different inorganic and organic materials are being explored for their potential in thermoelectric-energy-harvesting devices. Carbon-based thermoelectric materials are particularly attractive due to their use of nontoxic, abundant source-materials, their amenability to high-throughput solution-phase fabrication routes, and the high specific energy (i.e., W g-1) enabled by their low mass. Single-walled carbon nanotubes (SWCNTs) represent a unique 1D carbon allotrope with structural, electrical, and thermal properties that enable efficient thermoelectric-energy conversion. Here, the progress made toward understanding the fundamental thermoelectric properties of SWCNTs, nanotube-based composites, and thermoelectric devices prepared from these materials is reviewed in detail. This progress illuminates the tremendous potential that carbon-nanotube-based materials and composites have for producing high-performance next-generation devices for thermoelectric-energy harvesting.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

SN 2021adxl: A luminous nearby interacting supernova in an extremely low-metallicity environment

SN 2021adxl is a slowly evolving, luminous, Type IIn supernova with asymmetric emission line profiles, similar to the well-studied SN 2010jl. We present extensive optical, near-ultraviolet, and near-infrared photometry and spectroscopy covering ∼1.5 years post discovery. SN 2021adxl occurred in an unusual environment, atop a vigorously star-forming region that is offset from its host galaxy core. The appearance of Ly α and O II , as well as the compact core, would classify the host of SN 2021adxl as a “Blueberry” galaxy, analogous to higher redshift, low-metallicity, star-forming dwarf “Green Pea” galaxies. Using several abundance indicators, we find a metallicity of the explosion environment of only ∼0.1 Z ⊙ , the lowest reported metallicity for a Type IIn SN environment. SN 2021adxl reaches a peak magnitude of M r ≈ −20.2 mag and since discovery, SN 2021adxl has faded by only ∼4 magnitudes in the r band with a cumulative radiated energy of ∼1.5 × 10 50 erg over 18 months. SN 2021adxl shows strong signs of interaction with a complex circumstellar medium, seen by the detection of X-rays, revealed by the detection of coronal emission lines, and through multi-component hydrogen and helium profiles. In order to further understand this interaction, we model the H α profile using a Monte Carlo electron scattering code. The blueshifted high-velocity component is consistent with emission from a radially thin spherical shell resulting in the broad emission components due to electron scattering. Using the velocity evolution of this emitting shell, we find that the SN ejecta collide with circumstellar material of at least ∼5 M ⊙ assuming a steady-state mass-loss rate of ∼4 − 6 × 10 −3 M ⊙ yr −1 for the first ∼200 days of evolution. SN 2021adxl was last observed to be slowly declining at ∼0.01 mag d −1 , and if this trend continues, SN 2021adxl will remain observable after its current solar conjunction. Continuing the observations of SN 2021adxl may reveal signatures of dust formation or an infrared excess, similar to that seen for SN 2010jl.

Brennan, S. J. (ORCID:0000000313256235)↗

Phased Array Radiometer Calibration Using a Radiated Noise Source

Electronic beam steering capability of phased array antenna systems offer significant advantages when used in real aperture imaging radiometers. The sensitivity of such systems is limited by the ability to accurately calibrate variations in the antenna circuit characteristics. Passive antenna systems, which require mechanical rotation to scan the beam, have stable characteristics and the noise figure of the antenna can be characterized with knowledge of its physical temperature [1],[2]. Phased array antenna systems provide the ability to electronically steer the beam in any desired direction. Such antennas make use of active components (amplifiers, phase shifters) to provide electronic scanning capability while maintaining a low antenna noise figure. The gain fluctuations in the active components can be significant, resulting in substantial calibration difficulties [3]. In this paper, we introduce two novel calibration techniques that provide an end-to-end calibration of a real-aperture, phased array radiometer system. Empirical data will be shown to illustrate the performance of both methods.

Srinivasan, Karthik↗

The Apollo 16 drive tube 60009/60010. II - Petrology and major element partitioning among the regolith components

The paper summarizes petrographic and electron microprobe data from 22 polished thin sections that represent the total length of double drive tube 60009/60010 and discusses a new application of the method of modal recombination to estimate bulk chemistry. The modal recombination approach can be used to reliably calculate the chemistry of the greater than 0.02-mm size fraction and, more significantly, to derive the total major element partitioning among the regolith components.

Vaniman, D. T.↗

Preliminary Activation Analysis of Accelerator Components and Beam Stops at the NSLS-II

Bremsstrahlung is generated at the accelerator systems of the synchrotron radiation facilities by the radiative interaction of circulating electron beam with the accelerator components and with the residual gas molecules in the vacuum chamber. The photoneutron interaction of bremsstrahlung with the materials leads to the radio activation of the accelerator components through neutron emission and the production of radioisotopes. However this activation interaction is a second order effect because the intermediate process of bremsstrahlung production is involved. The photoneutron interaction takes place above the threshold bremsstrahlung energy of 7-20 MeV and the cross section for these interactions are in millibarns.

36 MATERIALS SCIENCE↗

Instantons, colloids and convergence of the 1/N expansion for the homogeneous electron gas

We investigate non-perturbative corrections to the large N expansion of the homogeneous electron gas. These are associated with instanton solutions to the effective action of the plasmon field. We show that, although the large field behavior of that action dominates the quadratic bare Coulomb term, there are no solutions at large field, and consequently none at large density. We argue that solutions would exist at low density if the large N theory had a Wigner crystal (WC) phase. However, we argue that this is not the case. Together with the implied convergence of the large N expansion, this implies that the homogeneous electron gas with N component spins and a Coulomb interaction scaling like 1∕N can only have a WC phase below a curve in the plane of N and density, which asymptotes to zero density at infinite N. We argue that for systems with a semi-classical expansion for order parameter dynamics, and a first order quantum transition between fluid and crystal phases, there are instantons associated with the decays of meta-stable fluid and crystal phases in the appropriate regions of the phase diagram. We argue that the crystal will decay into one or more colloidal or bubble phases (Kivelson and Spivak, 2006) rather than directly into the fluid. It is possible that the bubble phases remain stable all the way to the density where the crystal solution disappears. The bubbles of fluid will expand as the density is raised and gradually convert the system into a fluid filled with chunks of crystal. The transition to a translationally invariant phase is likely to be second order. Unfortunately, the HEG does not have a crystal phase at large N, where these semi-classical ideas could be examined in detail. We suggest that the evidence for negative dielectric function at intermediate densities for N=2 is an indicator of this second order transition. While the infinite N limit does not have a negative dielectric function at any density, it is possible that the closed large N equation for the plasmon two point function, derived in Banks (2018) might capture at least the qualitative features of the second order transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PetH is rate-controlling in the interaction between PetH, a component of the supramolecular complex with photosystem II, and PetF, a light-dependent electron transfer protein

Cyanobacterial PetH is similar to ferredoxin-NADP{sup +} oxidoreductase (FNR) of higher plants and comprises 2 components, CpcD-like rod linker and FNR proteins. Here, I show that PetH controls the rate of the interaction with PetF (ferredoxin [Fd1]). Purified recombinant PetH protein, which cut off a CpcD-like rod linker domain, and Fd1 were used in detailed surface plasmon resonance analyses. The interaction between FNR and Fd1 chiefly involved extremely fast binding and dissociation reactions and the FNR affinity for Fd1 was stronger than the Fd1 affinity for FNR. The dissociation constant values were determined as approximately 93.65 {mu}M (FNR) for Fd1 and 1.469 mM (Fd1) for FNR.

74 ATOMIC AND MOLECULAR PHYSICS↗

Room-Temperature Ferromagnetic Insulating State in Cation-Ordered Double-Perovskite Sr 2 Fe 1+ x Re 1– x O 6 Films

Ferromagnetic insulators (FMIs) are one of the most important components in developing dissipationless electronic and spintronic devices. However, FMIs are innately rare to find in nature as ferromagnetism generally accompanies metallicity. Here, novel room–temperature FMI films that are epitaxially synthesized by deliberate control of the ratio between two B–site cations in the double perovskite Sr 2 Fe 1+x Re 1–x O 6 (–0.2 ≤ x ≤ 0.2) are reported. In contrast to the known FM metallic phase in stoichiometric Sr2FeReO6, an FMI state with a high Curie temperature ( T c ≈ 400 K) and a large saturation magnetization ( M S ≈ 1.8 µB f.u. –1 ) is found in highly cation–ordered Fe–rich phases. The stabilization of the FMI state is attributed to the formation of extra Fe 3+ –Fe 3+ and Fe 3+ –Re 6+ bonding states, which originate from the relatively excess Fe ions owing to the deficiency in Re ions. As a result, the emerging FMI state created by controlling cations in the oxide double perovskites opens the door to developing novel oxide quantum materials and spintronic devices.

36 MATERIALS SCIENCE↗

Kinetic theory of radiation in non-equilibrium relativistic plasmas

Many-particle QED is applied to kinetic theory of radiative processes in many-component plasmas with relativistic electrons and non-relativistic heavy particles. Within the framework of non-equilibrium Green's function technique, transport and mass-shell equations for fluctuations of the electromagnetic field are obtained. We show that the transverse field correlation functions can be decomposed into sharply peaked (non-Lorentzian) parts that describe resonant (propagating) photons and off-shell parts corresponding to virtual photons in plasmas. Analogous decompositions are found for the longitudinal field correlation functions and the correlation functions of relativistic electrons. As a novel result a kinetic equation for the resonant photons with a finite spectral width is derived. The off-shell parts of the particle and field correlation functions are shown to be essential to calculate the local radiating power in relativistic plasmas and recover the results of vacuum QED. The influence of plasma effects and collisional broadening of the relativistic quasiparticle spectral function on radiative processes is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Discrete-element modeling of particulate aerosol flows

A multiple-time step computational approach is presented for efficient discrete-element modeling of aerosol flows containing adhesive solid particles. Adhesive aerosol particulates are found in numerous dust and smoke contamination problems, including smoke particle transport in the lungs, particle clogging of heat exchangers in construction vehicles, industrial nanoparticle transport and filtration systems, and dust fouling of electronic systems and MEMS components. Dust fouling of equipment is of particular concern for potential human occupation on dusty planets, such as Mars. The discrete-element method presented in this paper can be used for prediction of aggregate structure and breakup, for prediction of the effect of aggregate formation on the bulk fluid flow, and for prediction of the effects of small-scale flow features (e.g., due to surface roughness or MEMS patterning) on the aggregate formation. After presentation of the overall computational structure, the forces and torques acting on the particles resulting from fluid motion, particle-particle collision, and adhesion under van der Waals forces are reviewed. The effect of various parameters of normal collision and adhesion of two particles are examined in detail. The method is then used to examine aggregate formation and particle clogging in pipe and channel flow.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A short account of thermoelectric film characterization techniques

Thermoelectric films and periodic structures have particularly intriguing electrical and thermal transport features due to their low dimensionality. As a result, they have piqued the attention of researchers from across the spectrum of disciplines. Their applications span from cooling fast CPUs to providing energy for wearable devices. The progress in the techniques for synthesizing TE materials and fabricating thin films has facilitated the emergence of a flourishing research domain in the field of electrical and thermal transport at the nanoscale. Further, a significant proportion of contemporary electronic, opto-electronic, and solar energy components are composed of materials featuring numerous interfaces and nanoscale contacts. Consequently, it is imperative to explore the thermal energy transfer and charge carrier transport across the films with thickness dimensions in the nanometer range. The development of cutting-edge approaches for grasping complicated processes at the nanoscale is critical. This review provides a concise overview of the prevalent methodologies developed over the last two decades and employed for the characterization of the Seebeck coefficient and electrical and thermal conductivity of thermoelectric films.

36 MATERIALS SCIENCE↗

The Fermi function and the neutron's lifetime

The traditional Fermi function ansatz for nuclear beta decay describes enhanced perturbative effects in the limit of large nuclear charge Z and/or small electron velocity β. We define and compute the quantum field theory object that replaces this ansatz for neutron beta decay, where neither of these limits hold. We present a new factorization formula that applies in the limit of small electron mass, analyze the components of this formula through two loop order, and resum perturbative corrections that are enhanced by large logarithms. We apply our results to the neutron lifetime, supplying the first two-loop input to the long-distance corrections. Our result can be summarized as τ n x |V ud | 2 [1 + 3λ 2 ] [1 + Δ R ] = $\frac{5263.284(17) s}{1 + 27.04(7) x 10^{-3}}$ with |V ud | the up-down quark mixing parameter, τ n the neutron's lifetime, λ the ratio of axial to vector charge, and Δ R the short-distance matching correction. We find a shift in the long-distance radiative corrections compared to previous work, and discuss implications for extractions of |V ud | and tests of the Standard Model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Refine your search to explore more results.