Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “directional data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Lightweight, flexible, high-performance carbon nanotube cables made by scalable flow coating

Coaxial cables for data transmission are ubiquitous in telecommunications, aerospace, automotive, and robotics industries. Yet, the metals used to make commercial cables are unsuitably heavy and stiff. These undesirable traits are particularly problematic in aerospace applications, where weight is at a premium and flexibility is necessary to conform with the distributed layout of electronic components in satellites and aircraft. The cable outer conductor (OC) is usually the heaviest component of modern data cables; therefore, exchanging the conventional metallic OC for lower weight materials with comparable transmission characteristics is highly desirable. Carbon nanotubes (CNTs) have recently been proposed to replace the metal components in coaxial cables; however, signal attenuation was too high in prototypes produced so far. Here, we fabricate the OC of coaxial data cables by directly coating a solution of CNTs in chlorosulfonic acid (CSA) onto the cable inner dielectric. This coating has an electrical conductivity that is approximately 2 orders of magnitude greater than the best CNT OC reported in the literature to date. In conclusion, this high conductivity makes CNT coaxial cables an attractive alternative to commercial cables with a metal (tin-coated copper) OC, providing comparable cable attenuation and mechanical durability with a 97% lower component mass.

36 MATERIALS SCIENCE↗

Elucidation of Peptide-Directed Palladium Surface Structure for Biologically Tunable Nanocatalysts

Peptide-enabled synthesis of inorganic nanostructures represents an avenue to access catalytic materials with tunable and optimized properties. This is achieved via peptide complexity and programmability that is missing in traditional ligands for catalytic nanomaterials. Unfortunately, there is limited information available to correlate peptide sequence to particle structure and catalytic activity to date. As such, the application of peptide-enabled nanocatalysts remains limited to trial and error approaches. In this paper, a hybrid experimental and computational approach is introduced to systematically elucidate biomolecule-dependent structure/function relationships for peptide-capped Pd nanocatalysts. Synchrotron X-ray techniques were used to uncover substantial particle surface structural disorder, which was dependent upon the amino acid sequence of the peptide capping ligand. Nanocatalyst configurations were then determined directly from experimental data using reverse Monte Carlo methods and further refined using molecular dynamics simulation, obtaining thermodynamically stable peptide-Pd nanoparticle configurations. Sequence-dependent catalytic property differences for C-C coupling and olefin hydrogenation were then eluddated by identification of the catalytic active sites at the atomic level and quantitative prediction of relative reaction rates. This hybrid methodology provides a clear route to determine peptide-dependent structure/function relationships, enabling the generation of guidelines for catalyst design through rational tailoring of peptide sequences

atomic pair distribution function↗

Learning from Imperfections: Predicting Structure and Thermodynamics from Atomic Imaging of Fluctuations

In materials characterization, traditionally a single experimental sample is used to derive information about a single point in the composition space, while the imperfections, impurities, and stochastic details of material structure are deemed irrelevant or complicating factors in the analysis. Here we demonstrate that atomic-scale studies of a single nominal composition can provide information about microstructures and thermodynamic response over a finite area of chemical space. Using the principles of statistical inference, we develop a framework for incorporating structural fluctuations into statistical mechanical models and use it to solve the inverse problem of deriving effective interatomic interactions responsible for elemental segregation in a La 5/8 Ca 3/8 MnO 3 thin film. Here, the results are further analyzed by a variational autoencoder to detect anomalous behavior in the composition phase diagram. This study provides a framework for creating generative models from a combination of multiple experimental data and provides direct insight into the driving forces for cation segregation in manganites.

36 MATERIALS SCIENCE↗

Quantitative evaluation of minerals in lignites and intraseam sediments from the Achlada Basin, Northern Greece

Seven core samples (five lignite samples and two intraseam nonlignite rock samples) from the Achlada open-cut mine in northern Greece were characterized by X-ray diffraction (XRD) and X-ray fluorescence (XRF) techniques. Quantitative evaluation of the mineral phases in each sample was made from the powder X-ray diffractograms using Siroquant commercial interpretation software, which is based on Rietveld principles. The main minerals in the low-temperature ash (LTA) ash of the lignites are kaolinite and illite, with bassanite and quartz in minor proportions. The nonlignite rock samples mainly consist of illite, mica (2M1), and kaolinite (poorly ordered), along with quartz, chlorite (ferroan), feldspar (albite), rutile, and dolomite. Oriented-aggregate XRD study further shows the presence of smectite, and interstratified illite/smectite (I/S), in the clay fractions of the lignite and rock samples, with the mineral matter of the lignites being richer in kaolinite, smectite, and I/S than in mineral matter of the nonlignite materials. The differences in mineralogy between the lignite and the rock materials probably reflect selective concentration of minerals in the original peat during deposition, combined with authigenic precipitation of minerals such as kaolinite in the peat deposit. Inferred chemical analyses derived from the XRD data show reasonably good correlations with chemical data obtained by direct ash analysis, especially if the smectite and I/S are taken into account. This provides a link between mineralogical and chemical studies that may be valuable in evaluating the behavior of the lignite under different utilization conditions. 27 refs., 4 figs., 6 tabs.

01 COAL, LIGNITE, AND PEAT↗

Anomalous Growth Rate of Ag Nanocrystals Revealed by in situ STEM

In situ microscopy of colloidal nanocrystal growth offers a unique opportunity to acquire direct and straightforward data for assessing classical growth models. For this study, we observe the growth trajectories of individual Ag nanoparticles in solution using in situ scanning transmission electron microscopy. For the first time, we provide experimental evidence of growth rates of Ag nanoparticles in the presence of Pt in solution that are significantly faster than predicted by Lifshitz-Slyozov-Wagner theory. We attribute these observed anomalous growth rates to the synergistic effects of the catalytic properties of Pt and the electron beam itself. Transiently reduced Pt atoms serve as active sites for Ag ions to grow, thereby playing a key role in controlling the growth kinetics. Electron beam illumination greatly increases the local concentration of free radicals, thereby strongly influencing particle growth rate and the resulting particle morphology. Through a systematic investigation, we demonstrate the feasibility of utilizing these synergistic effects for controlling the growth rates and particle morphologies at the nanoscale. Our findings not only expand the current scope of crystal growth theory, but may also lead to a broader scientific application of nanocrystal synthesis.

36 MATERIALS SCIENCE↗

Analysis of Water Coupling in Inelastic Neutron Spectra of Uranyl Fluoride

Inelastic neutron scattering (INS) is uniquely sensitive to hydrogen due to its comparatively large thermal neutron scattering cross-section (82 b). Consequently, the inclusion of water in real samples presents significant challenges to INS data analysis due directly to the scattering strength of hydrogen. Here, we investigate uranyl fluoride (UO 2 F 2 ) with inelastic neutron scattering. UO 2 F 2 is the hydrolysis product of uranium hexafluoride (UF 6 ), and is a hygroscopic, uranyl-ion containing particulate. Raman spectral signatures are commonly used for inferential understanding of the chemical environment for the uranyl ion in UO 2 F 2 , but no direct measurement of the influence of absorbed water molecules on the overall lattice dynamics has been performed until now. To deconvolute the influence of waters on the observed INS spectra, we use density functional theory with full spectral modeling to separate lattice motion from water coupling. In particular, we present a careful and novel analysis of the Q-dependent Debye–Waller factor, allowing us to separate spectral contributions by mass, which reveals preferential water coupling to the uranyl stretching vibrations. Coupled with the detailed partial phonon densities of states calculated via DFT, we infer the probable adsorption locations of interlayer waters. We explain that a common spectral feature in Raman spectra of uranyl fluoride originates from the interaction of water molecules with the uranyl ion based on this analysis. In conclusion, the Debye–Waller analysis is applicable to all INS spectra and could be used to identify light element contributions in other systems.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Evaluating efficacy of indoor non-pharmaceutical interventions against COVID-19 outbreaks with a coupled spatial-SIR agent-based simulation framework

Contagious respiratory diseases, such as COVID-19, depend on sufficiently prolonged exposures for the successful transmission of the underlying pathogen. It is important that organizations evaluate the efficacy of non-pharmaceutical interventions aimed at mitigating viral transmission among their personnel. We have developed a operational risk assessment simulation framework that couples a spatial agent-based model of movement with an agent-based SIR model to assess the relative risks of different intervention strategies. By applying our model on MIT’s Stata center, we assess the impacts of three possible dimensions of intervention: one-way vs unrestricted movement, population size allowed onsite, and frequency of leaving designated work location for breaks. We find that there is no significant impact made by one-way movement restrictions over unrestricted movement. Instead, we find that reducing the frequency at which individuals leave their workstations combined with lowering the number of individuals admitted below the current recommendations lowers the likelihood of highly connected individuals within the contact networks that emerge, which in turn lowers the overall risk of infection. We discover three classes of possible interventions based on their epidemiological effects. By assuming a direct relationship between data on secondary attack rates and transmissibility in the agent-based SIR model, we compare relative infection risk of four respiratory illnesses, MERS, SARS, COVID-19, and Measles, within the simulated area, and recommend appropriate intervention guidelines.

60 APPLIED LIFE SCIENCES↗

Relationship between crystal structure and thermo-mechanical properties of kaolinite clay: Beyond standard density functional theory

In this study, the structural, mechanical and thermodynamic properties of 1 : 1 layered dioctahedral kaolinite clay, with ideal Al 2 Si 2 O 5 (OH) 4 stoichiometry, were investigated using density functional theory corrected for dispersion interactions (DFT-D2). The bulk moduli of 56.2 and 56.0 GPa predicted at 298 K using the Vinet and Birch–Murnaghan equations of state, respectively, are in good agreement with the recent experimental value of 59.7 GPa reported for well-crystallized samples. The isobaric heat capacity computed for uniaxial deformation of kaolinite along the stacking direction reproduces calorimetric data within 0.7–3.0% from room temperature up to its thermal stability limit.

36 MATERIALS SCIENCE↗

High-pressure neutron powder diffraction study of an arsenolite deuterium inclusion compound: structure and formation kinetics

High-pressure variable-temperature neutron powder diffraction was employed to investigate the synthesis and structural properties of arsenolite (As 4 O 6 ), a cubic arsenic( III ) oxide polymorph, and its inclusion compound with deuterium. The compound forms with the stoichiometry As 4 O 6 ·2D 2 , consistent with earlier findings. At 295 K and 1.96(2) GPa, D 2 molecules occupy the 16c site (0, 0, 0) and are aligned along the <111> direction. The diffraction data suggest that the D 2 molecules at this site become rotationally disordered upon decompression to 0.78(2) GPa at 120 K, while no occupancy is observed at the 8a position (⅛, ⅛, ⅛) under any of the studied conditions. The kinetic data of the high-pressure inclusion compound synthesis at 1.56(2) and 1.96(2) GPa were analyzed using the Avrami model. The Avrami exponent, 0.135(16), remains invariant with pressure, demonstrating that the reaction topochemistry is unaffected by compression. Similarly, the reaction rates, 0.29(3) and 0.23(3) min −0.135 at 1.56(2) and 1.96(2) GPa, respectively, exhibit negligible pressure dependence and suggest a surprisingly low activation volume of 1.6 cm 3 mol −1 for the reaction. These results provide detailed insight into the structural dynamics and kinetics of deuterium inclusion in arsenolite under high pressure.

Guńka, Piotr A. [Warsaw University of Technology (↗

Curiosity driven exploration to optimize structure–property learning in microscopy

Rapidly determining structure–property correlations in materials is an important challenge in better understanding fundamental mechanisms and greatly assists in materials design. In microscopy, imaging data provides a direct measurement of the local structure, while spectroscopic measurements provide relevant functional property information. Deep kernel active learning approaches have been utilized to rapidly map local structure to functional properties in microscopy experiments, but are computationally expensive for multi-dimensional and correlated output spaces. Here, we present an alternative lightweight curiosity algorithm which actively samples regions with unexplored structure–property relations, utilizing a deep-learning based surrogate model for error prediction. We show that the algorithm outperforms random sampling for predicting properties from structures, and provides a convenient tool for efficient mapping of structure–property relationships in materials science.

36 MATERIALS SCIENCE↗

Systematic comparison between line integrated densities measured with interferometry and polarimetry at JET

A systematic comparison between the line integrated electron density derived from interferometry and polarimetry at JET has been carried out. For the first time the reliability of the measurements of the Cotton-Mouton effect has been analyzed for a wide range of main plasma parameters and the possibility to evaluate the electron density directly from polarimetric data has been studied. The purpose of this work is to recover the interferometric data with the density derived from the measured Cotton-Mouton effect, when the fringe jump phenomena occur. The results show that the difference between the line integrated electron density from interferometry and polarimetry is with one fringe (1.143x10{sup 19} m{sup -2}) for more than 90% of the cases. It is possible to consider polarimetry as a satisfactory alternative method to interferometry to measure the electron density and it could be used to recover interferometric signal when a fringe jumps occurs, preventing difficulties for the real-time control of many experiments at the JET machine.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Kolmogorov similarity scaling for one-particle Lagrangian statistics

Here, we use direct numerical simulation data up to a Taylor scale Reynolds number R λ =1000 to investigate Kolmogorov similarity scaling in the inertial sub-range for one-particle Lagrangian statistics. While similarity scaling is not achieved at these Reynolds numbers for the Lagrangian velocity structure function, we show clearly that it is achieved for the Lagrangian acceleration frequency spectrum and the scaling range becomes wider with increasing Reynolds number. Stochastic and heuristic model calculations suggest that the difference in behavior observed for the structure function and spectrum is simply a consequence of different rates of convergence to scaling behavior with increasing Reynolds number. Our estimate C 0 ≈6.9±0.2 for the Lagrangian structure function constant is close to earlier estimates based on extrapolation of the peak value of the compensated structure function. The findings presented here suggest prospects for studying Kolmogorov similarity for Lagrangian statistics using the latest innovations in simulation, and measurement techniques are more hopeful than previously suggested in the literature.

42 ENGINEERING↗

Microscopic probing of the size dependence in hydrophobic solvation

We report small angle x-ray scattering data demonstrating the direct experimental microscopic observation of the small-to-large crossover behavior of hydrophobic effects in hydrophobic solvation. By increasing the side chain length of amphiphilic tetraalkyl-ammonium (C{sub n}H{sub 2n+1}){sub 4}N{sup +} (R{sub 4}N{sup +}) cations in aqueous solution we observe diffraction peaks indicating association between cations at a solute size between 4.4 and 5 A, which show temperature dependence dominated by hydrophobic attraction. Using O K-edge x-ray absorption we show that small solutes affect hydrogen bonding in water similar to a temperature decrease, while large solutes affect water similar to a temperature increase. Molecular dynamics simulations support, and provide further insight into, the origin of the experimental observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Acquisition and analysis of angle-beam wavefield data

Angle-beam ultrasonic testing is a common practical technique used for nondestructive evaluation to detect, locate, and characterize a variety of material defects and damage. Greater understanding of the both the incident wavefield produced by an angle-beam transducer and the subsequent scattering from a variety of defects and geometrical features is anticipated to increase the reliability of data interpretation. The focus of this paper is on acquiring and analyzing propagating waves from angle-beam transducers in simple, defect-free plates as a first step in the development of methods for flaw characterization. Unlike guided waves, which excite the plate throughout its thickness, angle-beam bulk waves bounce back and forth between the plate surfaces, resulting in the well-known multiple “skips” or “V-paths.” The experimental setup consists of a laser vibrometer mounted on an XYZ scanning stage, which is programmed to move point-to-point on a rectilinear grid to acquire waveform data. Although laser vibrometry is now routinely used to record guided waves for which the frequency content is below 1 MHz, it is more challenging to acquire higher frequency bulk waves in the 1–10 MHz range. Signals are recorded on the surface of an aluminum plate that were generated from a 5 MHz, 65° refracted angle, shear wave transducer-wedge combination. Data are analyzed directly in the x-t domain, via a slant stack Radon transform in the τ-p (offset time-slowness) domain, and via a 2-D Fourier transform in the ω-k domain, thereby enabling identification of specific arrivals and modes. Results compare well to those expected from a simple ray tracing analysis except for the unexpected presence of a strong Rayleigh wave.

42 ENGINEERING↗

A stochastic extension of the explicit algebraic subgrid-scale models

The explicit algebraic subgrid-scale (SGS) stress model (EASM) of Marstorp et al. [“Explicit algebraic subgrid stress models with application to rotating channel flow,” J. Fluid Mech. 639, 403–432 (2009)] and explicit algebraic SGS scalar flux model (EASFM) of Rasam et al. [“An explicit algebraic model for the subgrid-scale passive scalar flux,” J. Fluid Mech. 721, 541–577 (2013)] are extended with stochastic terms based on the Langevin equation formalism for the subgrid-scales by Marstorp et al. [“A stochastic subgrid model with application to turbulent flow and scalar mixing,” Phys. Fluids 19, 035107 (2007)]. The EASM and EASFM are nonlinear mixed and tensor eddy-diffusivity models, which improve large eddy simulation (LES) predictions of the mean flow, Reynolds stresses, and scalar fluxes of wall-bounded flows compared to isotropic eddy-viscosity and eddy-diffusivity SGS models, especially at coarse resolutions. The purpose of the stochastic extension of the explicit algebraic SGS models is to further improve the characteristics of the kinetic energy and scalar variance SGS dissipation, which are key quantities that govern the small-scale mixing and dispersion dynamics. LES of turbulent channel flow with passive scalar transport shows that the stochastic terms enhance SGS dissipation statistics such as length scale, variance, and probability density functions and introduce a significant amount of backscatter of energy from the subgrid to the resolved scales without causing numerical stability problems. The improvements in the SGS dissipation predictions in turn enhances the predicted resolved statistics such as the mean scalar, scalar fluxes, Reynolds stresses, and correlation lengths. Moreover, the nonalignment between the SGS stress and resolved strain-rate tensors predicted by the EASM with stochastic extension is in much closer agreement with direct numerical simulation data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and electronic properties of Si{sub 1–x}Ge{sub x} alloy nanowires

We present first-principles density-functional calculations of Si{sub 1–x}Ge{sub x} alloy nanowires. We show that given the composition of the alloy, the structural properties of the nanowires can be predicted with great accuracy by means of Vegard's law, linearly interpolating the values of a pure Si and a pure Ge nanowire of the same diameter. The same holds, to some extent, also for electronic properties such as the band-gap. We also assess to what extend the band-gap varies as a function of disorder, i.e., how it changes for different random realization of a given concentration. These results make possible to tailor the desired properties of SiGe alloy nanowires starting directly from the data relative to the pristine wires.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of recombination, dissociation, and competition between exciton-charge reactions in magnetoconductance of polymeric semiconductor device

Magnetoelectrical measurements were performed on a diode structure, based on an anthracene-containing poly(arylene-ethynylylene)-alt-poly(arylene-vinylene) denoted AnE-PVstat, to clarify the role of the recombination and dissociation of electron-hole (e-h) pairs in the magnetoconductance (MC). We report the observed MC under a weak magnetic field (<1 T) at room and low temperatures. Positive MC is observed and reaches up to 2% at a magnetic field of 450 mT at room temperature. It is found that with the increase of the voltage, the MC effect decreases. We also report the difference in MC between perpendicular (θ = 90°) and parallel (θ = 0°) alignment of magnetic field with respect to the current direction. The experimental data were analyzed in the context of the e-h pair model, based on the Stochastic Liouville Equation. To interpret the experimental results on magnetoconductance measurements, anisotropic hyperfine interaction has been introduced through an anisotropic hyperfine field. The dissociation rates q{sub S} and q{sub T} of the singlet and triplet e-h pairs were determined from the best fit with experimental curves and are about 10{sup 5 }s{sup −1}, while the recombination rates of the singlet and triplet e-h pairs are k{sub S} ∼ 10{sup 9 }s{sup −1} and k{sub T} ∼ 10{sup 5 }s{sup −1}, respectively. At low temperatures (T < 60 K), an unexpected “sign-reversal phenomenon” of the magnetoconductance is observed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Refine your search to explore more results.