Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Quentin Faure Internship Report

During the internship, the student has studied and modeled hydrogen diffusion, desorption, and adsorption in ZrH and YH using Bison. The student will move towards coupling the model developed in Bison for hydrogen migration to the neutronic response obtained from Griffin for the unit cell of a prototypical microreactor. Due to the length of the report being short, only a small part of the YH modeling is being presented here.

36 MATERIALS SCIENCE↗

Density functional theory studies of the structural, electronic, and phonon properties of Li{sub 2}O and Li{sub 2}CO{sub 3}: Application to CO{sub 2} capture reaction - article no. 014301

The structural, electronic, and phonon properties of Li{sub 2}O and Li{sub 2}CO{sub 3} solids are investigated using density functional theory (DFT) and their thermodynamic properties for CO{sub 2} absorption and desorption reactions are analyzed. The calculated bulk properties for both the ambient- and the high-pressure phases of Li{sub 2}O and Li{sub 2}CO{sub 3} are in good agreement with available experimental measurements. The oxygen atoms in the ambient phase of the Li{sub 2}CO{sub 3} crystal are not equivalent as reflected by two different sets of C-O bond lengths (1.28 and 1.31 {angstrom}) and they form two different groups. When Li{sub 2}CO{sub 3} dissociates, one group of O forms Li{sub 2}O, while the other group of O forms CO{sub 2}. The calculated phonon dispersion and density of states for the ambient phases of Li{sub 2}O and Li{sub 2}CO{sub 3} are in good agreement with experimental measurements and other available theoretical results. Li{sub 2}O(s)+CO{sub 2}(g) {rightleftharpoons} Li{sub 2}CO{sub 3}(s) is the key reaction of lithium salt sorbents (such as lithium silicates and lithium zircornates) for CO{sub 2} capture. The energy change and the chemical potential of this reaction have been calculated by combining DFT with lattice dynamics. Our results indicate that although pure Li{sub 2}O can absorb CO{sub 2} efficiently, it is not a good solid sorbent for CO{sub 2} capture because the reverse reaction, corresponding to Li{sub 2}CO{sub 3} releasing CO{sub 2}, can only occur at very low CO{sub 2} pressure and/or at very high temperature when Li{sub 2}CO{sub 3} is in liquid phase.

01 COAL, LIGNITE, AND PEAT↗

Preparation of porous TiO{sub 2}/silica composites without any surfactants

TiO{sub 2}-SiO{sub 2} composites, with high specific surface area (up to 308 m{sup 2}/g), large pore volume, and narrow distribution with average pore sizes of 3.2 nm, have been synthesized from wollastonite and titanium sulfate in the absence of any surfactants. Calcium sulfate, a microsolubility salt, plays an important role in the formation of pores in this porous TiO{sub 2}/silica composite. The microstructure and chemical composition of composite were characterized by X-ray diffractometry (XRD), transmission electron microscopy (TEM) equipped with energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectrometer (XPS) and N{sub 2} adsorption and desorption analysis. The as-prepared porous titanium dioxide-silicon dioxide composites with high specific surface area and well-crystallized anatase contents were used as an efficient photocatalyst. - Graphical abstract: TiO{sub 2}-SiO{sub 2} composites have been synthesized from wollastonite and titanium sulfate in the absence of any surfactants. In acid Ti(SO{sub 4}){sub 2} solution, Ca and Si ions in chain-like wollastonite could dissolve into the bulk solution and slightly soluble CaSO{sub 4} crystal phase and silicic acid formed. The concentration of the titanium species in the reaction solution is expected to increase with the hydrolysis process, nucleation starts. After the start of the nucleation, a very small amount of TiO{sub 2}, silicate and CaSO{sub 4} particle deposited together and formed composites. Some cavities formed during the washing step through the dissolution of CaSO{sub 4} crystal phase. The bulk of the material is then transformed from wollastonite into TiO{sub 2}/silica composites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pore accessibility of methane and carbon dioxide in coals

Two Australian coals were heat-treated, and the accessibility of the pore space to CH{sub 4} and CO{sub 2} was investigated. Samples heat-treated at 573 and 673 K exhibit larger adsorption/desorption hysteresis and smaller surface areas (measured by CO{sub 2} adsorption at 273 K) than untreated samples. For samples heat-treated at 773 K, however, the surface area increased by 50% and the hysteresis was lower, compared to untreated samples. These results demonstrate that volatile hydrocarbons at pore mouths are the cause of energy barriers that prevent adsorbing molecules from passing through. A conceptual model is proposed to illustrate changes in activation energy at constricted pore mouths. Also, the results suggest that both adsorption and desorption isotherms should be measured to determine kinetically inaccessible pore spaces in order to correctly estimate CH{sub 4} recovery and CO{sub 2} storage capacity. The results have importance to the problem of estimating CH{sub 4} recovery and CO{sub 2} storage capacity for CO{sub 2} geosequestration as part of a CO{sub 2}-enhanced coal bed methane recovery operation. 28 refs., 11 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

Preparation and photocatalytic ability of highly defective carbon nanotubes

The highly defective carbon nanotubes (CNTs) were prepared using a heat-treatment technique and their photocatalytic ability was reported for the first time. The results showed that the highly defective CNTs had the photocatalytic ability in the range of visible light. The results also indicated that the electrical properties of CNTs were dependent not only on the diameter and helicity but also on the defect number of tubes. The defects of CNTs might be produced from vacancies, local lattice reordering and intertube reorientation during the course of the desorption of oxygen atoms, which could initiate defect states in the band gap. Absorption of visible light led to the formation of electron/hole pairs and hence caused photocatalytic oxidation. Consequently, the highly defective CNTs having the photocatalytic ability would be promising as a new photocatalytic material in the visible light. - Graphical abstract: The highly defective carbon nanotubes (CNTs) were prepared using a heat-treatment technique. The results showed that the highly defective CNTs had the photocatalytic ability in the range of visible light.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and textural evolution of alumina particles with mesoporous structures

Alumina particles with mesostructures were synthesized through a chemical precipitation method by using different inorganic aluminum salts followed by a heterogeneous azeotropic distillation and calcination process. The obtained mesoporous {gamma}-alumina particles were systematically characterized by the X-ray diffraction, transmission electron microscopy and nitrogen adsorption-desorption measurement. Effects of the aluminum salt counter anion, pH value and the azeotropic distillation process on the structural or textural evolution of alumina particles were investigated. It is found that Cl{sup -} in the reaction solution can restrain the textural evolution of the resultant precipitates into two-dimensional crystallized pseudoboehmite lamellae during the heterogeneous azeotropic distillation, and then transformed into {gamma}-Al{sub 2}O{sub 3} particles with mesostructures after further calcination at 1173 K, whereas coexisting SO{sub 4}{sup 2-} can promote above morphology evolution and then transformed into {gamma}-Al{sub 2}O{sub 3} nanofibers after calcination at 1173 K. Moreover nearly all materials retain relatively high specific surface areas larger than 100 m{sup 2} g{sup -1} even after calcinations at 1173 K. - Graphical abstract: Co-existing Cl{sup -} is beneficial for the formation of {gamma}-alumina nanoparticles with mesostructures during the precipitation process. Interparticle and intraparticle mesopores can be derived from acidic solution and near neutral solution, respectively.

36 MATERIALS SCIENCE↗

Mixed surfactants-directed the mesoporous silica materials with various morphologies and structures

A new mixed surfactants system using alkyl carboxylic acids and quaternized poly[bis(2-chloroethyl)ether-alt-1,3-bis[3-(dimethylamino)propyl] urea] (PEPU) as the co-template was used to synthesize mesoporous silica materials with various morphologies and structures, including flakes, regular spheres, nanoparticles, and tube-spheres. The cationic polymer connected the anionic surfactant micelle to the anionic polysilicate species to induce the synthesis of the mesoporous silica materials. The structure and property of the surfactant and the cationic polymer determined the formation of mesoporous silica, and also had a signification influence on the morphology and structure of the final materials. To further explore the possible formation mechanism of these mesoporous materials, zeta potential was utilized to evaluate the interaction between the anionic surfactant and the cationic co-template. In addition, the structure, morphology, and porosity of these materials were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N{sub 2} adsorption-desorption measurements. - Graphical abstract: A new mixed surfactants system using alkyl carboxylic acids and PEPU as the co-template was used to synthesize mesoporous silica materials with various morphologies and structures. Highlights: {yields}A new mixed surfactants system induced the mesoporous silica materials with various morphologies and structure. > It is a development of the type S{sup -}N{sup +}I{sup -} route of the mesoporous formation. > Zeta potential was utilized to evaluate the interaction between the anionic surfactant and the cationic co-template. > The property and amount of surfactant and polymer determined the formation of the mesoporous materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of mesoporous zeolite single crystals with cheap porogens

Mesoporous zeolite (silicalite-1, ZSM-5, TS-1) single crystals have been successfully synthesized by adding soluble starch or sodium carboxymethyl cellulose (CMC) to a conventional zeolite synthesis system. The obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen sorption analysis, {sup 27}Al magic angle spinning nuclear magnetic resonance ({sup 27}Al MAS NMR), temperature-programmed desorption of ammonia (NH{sub 3}-TPD) and ultraviolet-visible spectroscopy (UV-vis). The SEM images clearly show that all zeolite crystals possess the similar morphology with particle size of about 300 nm, the TEM images reveal that irregular intracrystal pores are randomly distributed in the whole crystal. {sup 27}Al MAS NMR spectra indicate that nearly all of the Al atoms are in tetrahedral co-ordination in ZSM-5, UV-vis spectra confirm that nearly all of titanium atoms are incorporated into the framework of TS-1. The catalytic activity of meso-ZSM-5 in acetalization of cyclohexanone and meso-TS-1 in hydroxylation of phenol was also studied. The synthesis method reported in this paper is cost-effective and environmental friendly, can be easily expended to prepare other hierarchical structured zeolites. - Graphical abstract: Mesoporous zeolite single crystals were synthesized by using cheap porogens as template. Highlights: > Mesoporous zeolite (silicalite-1, ZSM-5, TS-1) single crystals were synthesized. > Soluble starch or sodium carboxymethyl cellulose (CMC) was used as porogens. > The mesoporous zeolites had connected mesopores although closed pores existed. > Higher catalytic activities were obtained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Functionalized bimodal mesoporous silicas as carriers for controlled aspirin delivery

The bimodal mesoporous silica modified with 3-aminopropyltriethoxysilane was performed as the aspirin carrier. The samples' structure, drug loading and release profiles were characterized with X-ray diffraction, scanning electron microscopy, N{sub 2} adsorption and desorption, Fourier transform infrared spectroscopy, TG analysis, elemental analysis and UV-spectrophotometer. For further exploring the effects of the bimodal mesopores on the drug delivery behavior, the unimodal mesoporous material MCM-41 was also modified as the aspirin carrier. Meantime, Korsmeyer-Peppas equation f{sub t}=kt{sup n} was employed to analyze the dissolution data in details. It is indicated that the bimodal mesopores are beneficial for unrestricted drug molecules diffusing and therefore lead to a higher loading and faster releasing than that of MCM-41. The results show that the aspirin delivery properties are influenced considerably by the mesoporous matrix, whereas the large pore of bimodal mesoporous silica is the key point for the improved controlled-release properties. - Graphical abstract: Loading (A) and release profiles (B) of aspirin in N-BMMs and N-MCM-41 indicated that BMMs have more drug loading capacity and faster release rate than that MCM-41. Highlights: > Bimodal mesoporous silicas (BMMs) and MCM-41 modified with amino group via post-treatment procedure. > Loading and release profiles of aspirin in modified BMMs and MCM-41. > Modified BMMs have more drug loading capacity and faster release rate than that modified MCM-41.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CuO-ZnO heterometallic hollow spheres: Morphology and defect structure

The Cu-ZnO hollow spheres, where CuO nanocrystals were dispersed in the shell of ZnO nanoparticals, were synthesized by using highly uniform and monodispersed Cu-embedded carbon spheres as sacrificial templates via a simple route under hydrothermal conditions. The morphology and structure of the spheres were characterized by FTIR, XRD, SEM, TEM and N{sub 2} adsorption-desorption. It was suggested that the OH and C=O groups in the surface of the Cu-embedded carbon spheres facilitated the adsorption of Zn{sup 2+} in the aqueous solution, giving rise to the final CuO-ZnO hollow structure after these Zn{sup 2+}-adsorbed spheres were calcined in air. Moreover, the photoluminescence (PL) study showed that the as-prepared CuO-ZnO hollow spheres and the annealed counterpart exhibited strong and dramatically weakened emissions, respectively. This remarkably different photoluminescent behavior afforded the evidence regarding the oxygen vacancy defects in the CuO-ZnO hollow spheres. - Graphical abstract: CuO-ZnO hollow spheres were obtained using Cu-embedded carbon spheres as template, and the photoluminescent spectra afforded the evidence regarding the oxygen vacancies in the hollow spheres. Highlights: Black-Right-Pointing-Pointer A approach was presented to prepare carbon spheres in a high yield. Black-Right-Pointing-Pointer The fabrication of CuO-ZnO hollow spheres was a simple route. Black-Right-Pointing-Pointer The photoluminescence afforded the evidence of the oxygen vacancies in the hollows. Black-Right-Pointing-Pointer The synthetic approach might be applicable to preparing other hollow structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of gasification kinetics parameters of different types of nuclear graphite

A chemical-reaction kinetics model of nuclear graphite gasification has recently been developed and successfully validated with gasification rate measurements for nuclear graphite grades of IG-110, IG-430, NBG-18 and NBG-25. The model employs 4 elementary chemical reactions with applicable parameters, including the values and Gaussian-like distributions of the specific activation energies, the pre-exponential coefficients for adsorption of oxygen and desorption of CO and CO{sub 2} gases, and the surface area of free active sites. These parameters are determined from the reported measurements of the total gasification and transient weight loss using a multi-parameter optimization algorithm. The determined chemical kinetics parameters for IG-100 and NB-25 are nearly the same, but slightly different from those for NBG-18 and IG-430. The initial specific area of free active sites is inversely proportional to the square root of the mass or volume of the graphite specimens used in experiments. The recommended chemical kinetics parameters in this paper for these grades of nuclear graphite should be applicable to future safety analysis of high-temperature gas cooled reactors in the unlikely event of a massive air ingress accident. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Hydrogen retention in deposition layers formed from type 316 stainless steel

From the viewpoints of plasma control and radiation safety, tritium retention in deposition layers is an important problem. In this study, deposition layers from type 316 stainless steel were formed by a sputtering method using hydrogen RF plasma at three different temperatures. The behavior of hydrogen release from the deposition layers was observed by a thermal desorption method at argon atmosphere. It was found that hydrogen retention and release behavior greatly change depending on the temperature of a substrate where the layer is formed. The surface structure of the layer also changed depending on the temperature. However, the ratios of metallic atoms such as Fe, Cr and Ni in deposition layers were almost the same as that in type 316 stainless steel. (authors)

36 MATERIALS SCIENCE↗

Deuterium and helium release and microstructure of tungsten deposition layers formed by RF plasma sputtering

It is important to evaluate tritium behavior in tungsten deposition layers considering a long-term plasma operation. In this study, tungsten deposition layers were formed by deuterium or helium RF plasma sputtering. The release behavior of deuterium or helium from the layers were observed by a thermal desorption method. When a tungsten deposition layer does not contain oxygen, the retained deuterium is mainly released as D{sub 2}. When oxygen exists in the layer, the majority of deuterium is released as water vapor. Tungsten deposition layers have an amorphous structure and consist offline grain with size of 2-3 nm. Numerous bubbles are observed in the layers. A formation of tungsten deposition layer in a fusion reactor may make tritium control more difficult. (authors)

36 MATERIALS SCIENCE↗

Experimental verification of hydrogen isotope separation by pressure swing adsorption

Focusing on synthetic zeolites that adsorb hydrogen isotopes at liquid N{sub 2} temperature with priority in the order of T{sub 2}, DT, D{sub 2}, HT, HD and H{sub 2}, we have been developing a pressure swing adsorption process system for hydrogen isotope separation. For this purpose, we carried out fundamental experiments of adsorption and desorption of a tracer D{sub 2} in bulk H{sub 2} with zeolite packed-bed columns. In this paper, the results are reported that D{sub 2} is enriched in the adsorbed phase at separation factors near 2.0, flowing through zeolite 5A and 13X packed-beds at 77.4 K. These are in agreement with values predicted from the multi-component equilibrium characteristics. In the gas samples recovered by evacuating the packed-beds, however, D{sub 2} was detected at a relative concentration of 1.20 or 1.32 to that in the feed gas. This lower range results from the isotopic mass effect in kinetic process. That suggests a highly D{sub 2}-enriched residual left during evacuation. This is verified with an unusually high enrichment factor of 6.68 or 9.21 for zeolite 5A or 13X measured in the residual sample desorbed from the packed-bed by heating up to room temperature. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

Hydrogen isotope separation using molecular sieve of synthetic zeolite 3A

It is known that hydrogen isotope molecules can be adsorbed easily onto synthetic zeolite 4A, 5A, and 13X at the liquid-nitrogen temperature of 77.4 K. We show here that hydrogen and deuterium are not adsorptive onto zeolite 3A at the same temperature. This phenomenon is explained by assuming the molecular sieve function in zeolite-3A-crystalline lattice structure. From a series of pseudo-isobaric experiments, it is also shown that the sieving phenomenon appears in a range above 77.4 K. This behavior is interpreted as resulting on the dependence of sieve's mesh size on temperature, where the sieving effect is considered to appear at a certain temperature. In this interpretation, an isotopic difference between hydrogen and deuterium is suggested to exist in the sieving effect appearance temperatures. This is endorsed in the result of pseudo-isobaric experiments. This temperature deference is very significant because that indicates the possibility of an effective method of hydrogen isotope separation. This possibility is verified through an experimental series of adsorption-desorption with a mixture of H{sub 2} and D{sub 2}, where the gas samples adsorbed through the sieve operated at intentionally selected temperatures are isolated and then analyzed. The result demonstrates remarkable values of isotope separation factor. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

Optimization of sintered AgI-Mordenite composites for {sup 129}I storage

The thermal processing of a proposed durable waste form for {sup 129}I was investigated. The waste form is a composite with a matrix of low-temperature sintering glass that encapsulates particles of AgI-mordenite. Ag-mordenite, an ion-exchanged zeolite, is being considered as a capture medium for gaseous {sup 129}I{sub 2} as part of a spent nuclear fuel reprocessing scheme under development by the US Department of Energy/Nuclear Energy (NE). The thermal processing of the waste form is necessary to increase the density of the glass matrix by viscous sintering so that the final waste form does not have any open porosity. Other processes that can also occur during the thermal treatment include desorption of chemisorbed I{sub 2}, volatilization of AgI and crystallization of the glass matrix. We have optimized the thermal processing to achieve the desired high density with higher AgI-mordenite loading levels and with minimal loss of iodine. Using these conditions, 625 C. degrees for 20 minutes, the matrix crystallizes to form a eulytite phase. Results of durability tests indicate that the matrix crystallization does not significantly decrease the durability in aqueous environments. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Integrated Wash-Aid, Treatment, and Emergency Reuse System (IWATERS) for Strontium Contaminations - 17390

The Integrated Wash-Aid, Treatment, and Emergency Reuse System (IWATERS) is being developed to mitigate the release of radioactivity to the urban environment by disseminating, collecting, and processing decontamination wash water. Previously, IWATERS was designed for the treatment of surfaces contaminated with radioactive cesium. Experiments were performed to investigate the expansion of IWATERS for strontium contamination. Bench-scale tests were performed to investigate various counter-ions and chelators to promote ion exchange of strontium from building surfaces. Desorption results for Cs, Sr, and Eu from concrete aggregate and concrete, brick, and asphalt coupons using low- and high-pressure flow with Ca{sup 2+} and Ba{sup 2+} rich wash water are reported along with those from non-porous surfaces such as glass and vinyl siding. Several sorbents were tested for their ability to specifically separate Sr{sup 2+} from these high ionic strength wash waters. Alkali metal and alkaline earth salts were found to be effective counter-ions for decontamination of Sr{sup 2+}, which may facilitate the use of common sorbents, even if their K{sub d} values are <100 mL/g. In practice, low K{sub d} values require the use of large quantities of sorbent. Computer simulations were run using the GoldSim Contaminant Fate Module software package to optimize the efficiency of IWATERS for strontium and account for the technical limitations of the sorbents. This modeling allows greater flexibility to design the wash water recycling system for various end-user specifications including options from rain barrel designs for treating runoff from roofs and facades to larger options like drainage basins for larger-scale wash down activities. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Evaluation of a low cost humate solution as an in situ amendment to enhance attenuation of uranium in an acidic plume - 15445

A single well injection test was conducted in the acidic portion of a groundwater contamination plume beneath the F-Area Seepage Basins on the U.S. Department of Energy's Savannah River Site to evaluate humate as a viable amendment to enhance attenuation of uranium and other radionuclides. Humate is typically used as an inexpensive organic fertilizer. A solution of humate was injected into a monitoring well in the heart of the F-Area Seepage Basins plume. The geochemical conceptual model suggests humate adsorbs to mineral surfaces creating a subsurface treatment zone in which uranium adsorption is enhanced. Following humate injection, groundwater was sampled from the injection well at regular intervals to determine the composition of groundwater and to evaluate the sorption of contaminants within the treatment zone. Attenuation of uranium, radioiodine and Strontium-90 was determined by comparing concentrations to analytes unaffected by the humate, specifically tritium, nitrate, and specific conductance. The post-injection monitoring data showed enhanced uranium attenuation in the treatment zone as uranium concentrations rebounded to only 68% of the pre-test concentrations. Radioiodine attenuation was complicated by changing speciation during the test. When pH was elevated by the humate injection, iodate dominated and enhanced attenuation was observed. As pH decreased, iodide dominated and enhanced attenuation decreased. Humate did not significantly attenuate Strontium-90. Results of the humate injection test demonstrate that humate strongly adsorbs to the aquifer sediments at acidic pH. Humate desorption curves suggest that a substantial fraction of humate will remain adsorbed to the sediments for long-periods of time. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Refine your search to explore more results.