SEARCH · Engineering Papers

Results for “density estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

All sources NASA NTRS DOE OSTI

NASA NTRS2006

NASA Tech Briefs, July 2006

Topics covered include: Airport Remote Tower Sensor Systems; Implantable Wireless MEMS Sensors for Medical Uses; Embedded Sensors for Measuring Surface Regression; Coordinating an Autonomous Earth-Observing Sensorweb; Range-Measuring Video Sensors; Stability Enhancement of Polymeric Sensing Films Using Fillers; Sensors for Using Times of Flight to Measure Flow Velocities; Receiver Would Control Phasing of a Phased-Array Antenna; Modern Design of Resonant Edge-Slot Array Antennas; Carbon-Nanotube Schottky Diodes; Simplified Optics and Controls for Laser Communications; Coherent Detection of High-Rate Optical PPM Signals; Multichannel Phase and Power Detector; Using Satellite Data in Weather Forecasting: I; Using Dissimilarity Metrics to Identify Interesting Designs; X-Windows PVT Widget Class; Shuttle Data Center File-Processing Tool in Java; Statistical Evaluation of Utilization of the ISS; Nanotube Dispersions Made With Charged Surfactant; Aerogels for Thermal Insulation of Thermoelectric Devices; Low-Density, Creep-Resistant Single-Crystal Superalloys; Excitations for Rapidly Estimating Flight-Control Parameters; Estimation of Stability and Control Derivatives of an F-15; Tool for Coupling a Torque Wrench to a Round Cable Connector; Ultrasonically Actuated Tools for Abrading Rock Surfaces; Active Struts With Variable Spring Stiffness and Damping; Multiaxis, Lightweight, Computer-Controlled Exercise System; Dehydrating and Sterilizing Wastes Using Supercritical CO2; Alpha-Voltaic Sources Using Liquid Ga as Conversion Medium; Ice-Borehole Probe; Alpha-Voltaic Sources Using Diamond as Conversion Medium; White-Light Whispering-Gallery-Mode Optical Resonators; Controlling Attitude of a Solar-Sail Spacecraft Using Vanes; and Wire-Mesh-Based Sorber for Removing Contaminants from Air.

Source record↗

NASA NTRS2014

Revealing Asymmetries in the HD181327 Debris Disk: A Recent Massive Collision or Interstellar Medium Warping

New multi-roll coronagraphic images of the HD181327 debris disk obtained using the Space Telescope Imaging Spectrograph on board the Hubble Space Telescope reveal the debris ring in its entirety at high signal-to-noise ratio and unprecedented spatial resolution. We present and apply a new multi-roll image processing routine to identify and further remove quasi-static point-spread function-subtraction residuals and quantify systematic uncertainties. We also use a new iterative image deprojection technique to constrain the true disk geometry and aggressively remove any surface brightness asymmetries that can be explained without invoking dust density enhancements/ deficits. The measured empirical scattering phase function for the disk is more forward scattering than previously thought and is not well-fit by a Henyey-Greenstein function. The empirical scattering phase function varies with stellocentric distance, consistent with the expected radiation pressured-induced size segregation exterior to the belt. Within the belt, the empirical scattering phase function contradicts unperturbed debris ring models, suggesting the presence of an unseen planet. The radial profile of the flux density is degenerate with a radially varying scattering phase function; therefore estimates of the ring's true width and edge slope may be highly uncertain.We detect large scale asymmetries in the disk, consistent with either the recent catastrophic disruption of a body with mass greater than 1% the mass of Pluto, or disk warping due to strong interactions with the interstellar medium.

Henyey Greenstein function↗

NASA NTRS2016

A New Operational Snow Retrieval Algorithm Applied to Historical AMSR-E Brightness Temperatures

Snow is a key element of the water and energy cycles and the knowledge of spatio-temporal distribution of snow depth and snow water equivalent (SWE) is fundamental for hydrological and climatological applications. SWE and snow depth estimates can be obtained from spaceborne microwave brightness temperatures at global scale and high temporal resolution (daily). In this regard, the data recorded by the Advanced Microwave Scanning Radiometer-Earth Orbiting System (EOS) (AMSR-E) onboard the National Aeronautics and Space Administration's (NASA) AQUA spacecraft have been used to generate operational estimates of SWE and snow depth, complementing estimates generated with other microwave sensors flying on other platforms. In this study, we report the results concerning the development and assessment of a new operational algorithm applied to historical AMSR-E data. The new algorithm here proposed makes use of climatological data, electromagnetic modeling and artificial neural networks for estimating snow depth as well as a spatio-temporal dynamic density scheme to convert snow depth to SWE. The outputs of the new algorithm are compared with those of the current AMSR-E operational algorithm as well as in-situ measurements and other operational snow products, specifically the Canadian Meteorological Center (CMC) and GlobSnow datasets. Our results show that the AMSR-E algorithm here proposed generally performs better than the operational one and addresses some major issues identified in the spatial distribution of snow depth fields associated with the evolution of effective grain size.

passive microwave↗

NASA NTRS2023

The Variable Detection of Atmospheric Escape around the Young, Hot Neptune AU Mic b

Photoevaporation is a potential explanation for several features within exoplanet demographics. Atmospheric escape observed in young Neptune-sized exoplanets can provide insight into and characterize which mechanisms drive this evolution and at what times they dominate. AU Mic b is one such exoplanet, slightly larger than Neptune (4.19 R ⊕ ). It closely orbits a 23 Myr pre-main-sequence M dwarf with an orbital period of 8.46 days. We obtained two visits of AU Mic b at Lyα with Hubble Space Telescope (HST)/Space Telescope Imaging Spectrograph. One flare within the first HST visit is characterized and removed from our search for a planetary transit. We present a nondetection in our first visit, followed by the detection of escaping neutral hydrogen ahead of the planet in our second visit. The outflow absorbed ∼30% of the star’s Lyα blue wing 2.5 hr before the planet’s white-light transit. We estimate that the highest-velocity escaping material has a column density of 10 13.96 cm −2 and is moving 61.26 km s −1 away from the host star. AU Mic b’s large high-energy irradiation could photoionize its escaping neutral hydrogen in 44 minutes, rendering it temporarily unobservable. Our time-variable Lyα transit ahead of AU Mic b could also be explained by an intermediate stellar wind strength from AU Mic that shapes the escaping material into a leading tail. Future Lyα observations of this system will confirm and characterize the unique variable nature of its Lyα transit, which, combined with modeling, will tune the importance of stellar wind and photoionization.

Exoplanets↗

DOE OSTI2023

Muon-Catalyzed Fusion

Fusion holds great promise as a clean and abundant energy source. However, traditional thermonuclear fusion encounters significant challenges due to the extreme temperatures required to overcome the coulomb barrier for two nuclei to fuse. In contrast, muon-catalyzed fusion presents an alternative approach that can surmount this barrier at significantly lower temperatures. Muons, with properties resembling those of electrons but 200 times heavier, can effectively reduce the atomic orbital radius, enabling central nuclei to overcome the coulomb force through the strong force. By introducing muons into a mixture of deuterium and tritium (two hydrogen isotopes), fusion is facilitated, releasing a 3.5MeV alpha particle and a 14.1MeV neutron. In the majority of cases, the muon is liberated and can initiate further fusions. However, approximately 0.8% of the time, it adheres to the alpha particle and remains bound until it either decays or undergoes reactivation through collisional ionization. To maximize the number of fusions per muon, it is crucial to enhance the cycling rate and reactivation fraction. Theoretical predictions and experimental data both suggest that the sticking rate decreases with increasing density. However, there exists a discrepancy between experimental observations and theoretical estimations regarding the extent of this decrease. To address these disparities, this experiment aims to investigate the cycling rate and sticking fraction under higher temperatures and pressures than previously explored.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

Comparative critical mass calculations for NNL and ENDF/B-VIII.0 - Zirconium hydride thermal neutron scattering laws

Zirconium hydride (ZrH{sub x}) is a moderator material for TRIGA reactors and historical space reactor systems, such as SNAP-10A. Thermal neutron scattering laws (TSL) for two phases of this material, δ and ε, have been previously evaluated by Naval Nuclear Laboratory (NNL) and submitted to the National Nuclear Data Center (NNDC) for inclusion in the US national ENDF/B-VIII.1 nuclear data library. In contrast to the current ENDF/B-VIII.0 TSL evaluations, which consider only a single phase, the new evaluations are derived from separate ab initio calculations for both phases and include coherent elastic effects of the zirconium sublattice. To estimate the impact of these changes to the TSL evaluation of this material, comparative critical mass calculations were performed with MC21 for homogenous mixtures of high-enriched uranium (HEU) and ZrH{sub x} in bare and water reflected sphere configurations. These calculations yield an impact on the estimated critical mass as a function of {sup 235}U loading density with maximum differences as large as 1% - 5% for over-moderated thermal spectrum systems. Consequently, the NNL TSL evaluations are anticipated to have a small impact on criticality calculations of thermal reactor systems regardless of the material phase. Nevertheless, characteristic differences exist in the predicted thermal spectra as function of energy for the two sets of TSL evaluations, which are attributed to difference in the underlying phonon density of states of hydrogen bound in ZrH{sub x}. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NASA NTRS1992

On the asymptotic improvement of supervised learning by utilizing additional unlabeled samples - Normal mixture density case

The effect of additional unlabeled samples in improving the supervised learning process is studied in this paper. Three learning processes. supervised, unsupervised, and combined supervised-unsupervised, are compared by studying the asymptotic behavior of the estimates obtained under each process. Upper and lower bounds on the asymptotic covariance matrices are derived. It is shown that under a normal mixture density assumption for the probability density function of the feature space, the combined supervised-unsupervised learning is always superior to the supervised learning in achieving better estimates. Experimental results are provided to verify the theoretical concepts.

Shahshahani, Behzad M.↗

DOE OSTI2023

Unraveling the core of fuel cell performance: engineering the ionomer/catalyst interface

The biggest obstacle to the widespread implementation of polymer electrolyte membrane fuel cells (PEMFCs) is their cost, primarily due to the use of platinum catalysts. The high intrinsic catalyst activity exhibited on a rotating disk electrode (RDE) is rarely realized in a membrane electrode assembly (MEA), which is a long-standing challenge for PEMFCs and a cause of low catalyst utilization. To translate the high RDE performance of a catalyst into a MEA, the design of an ideal ionomer/catalyst interface is proposed: a thin, conformal ionomer film covers the maximum surface of a Pt nanoparticle and thus simultaneously maximizes catalyst utilization, (i.e., high mass activity and electrochemically active surface area) and O 2 diffusion rate (i.e., high current density performance) without compromising proton conduction. Building such an interface is a long-standing challenge due to the lack of interaction between the ionomer and catalyst particles, resulting in large ionomer agglomerates and inhomogeneous ionomer coverage over the catalyst nanoparticle, with consequent poor fuel cell performance. In this work, this ionomer/catalyst interface has been engineered, utilizing the electrostatic attraction between positively charged catalyst and negatively charged ionomer particles in a catalyst ink and preserved in a solid catalyst layer. As a result, this interface leads to previously unachieved proton exchange membrane fuel cell performance in terms of both catalyst utilization (75% vs. 45%) and peak/rated power density (i.e., 1.430/0.930 W cm -2 , H 2 /air, cathode Pt loading: 0.1 mgPt cm -2 ) for pure Pt catalysts, even better than those of Pt alloy catalysts. This work demonstrates the formation of an interface in the liquid phase (using ultra-small-angle X-ray scattering in combination with cryo-TEM, isothermal–titration–calorimetry) and the preservation of the interface in the solid catalyst layer (using TEM) and estimates the effective coverage and thickness of the ionomer film (using limiting current density, RDE and fuel cell performance).

25 ENERGY STORAGE↗

DOE OSTI2022

Technoeconomic optimization of superalloy supercritical CO 2 microtube shell-and-tube-heat exchangers

Heat exchangers are critical components of aerospace systems and improve efficiency of operation by providing waste heat recovery. Supercritical CO has emerged as a promising candidate working fluid due to its potential in increasing the power density of heat exchangers. In this paper, a generalized costing model is developed to estimate the capital costs incurred to manufacture microtube shell-and-tube heat exchangers. This model is utilized in conjunction with an accurate and efficient 2D numerical shell-and-tube heat exchanger performance prediction model to conduct optimization studies with two key objectives – minimization of cost and maximization of heat exchanger power density – on supercritical CO microtube heat exchangers utilizing superalloy Haynes 282 as the solid material. A methodology is then demonstrated to optimize these heat exchangers using Particle Swarm Optimization for aerospace applications and highly compact and cost-effective optimal designs with power density around 20 and cost per conductance less than 5 $ ∙ K/W are obtained.

42 ENGINEERING↗

NASA NTRS2021

Importance of Quantifying the Full-depth Carbon Reservoir of Jamaica Bay Salt Marshes, New York

Constraining uncertainty in the global carbon cycle requires valid assessment of both surface and stored carbon in marine and coastal ecosystems (Blue Carbon) as well as terrestrial carbon (forests, peatlands, and soils) [Pendleton et al., 2012]. Quantifying the global carbon stock of coastal salt marshes, potentially the most efficient carbon-burying ecosystems in the world per area, is a key area of further research in both of these fields Pendleton et al., 2012. One of the largest challenges is that despite the fact that salt marshes often sequester carbon several meters deep, nearly all estimates of salt marsh carbon stocks consider only the upper 1 m of sediment (Windham-Myers et al., 2015) [54]. This is particularly concerning because coastal wetlands are increasingly at risk due to climate change, sea level rise, and anthropogenic disturbance and destruction (Deegan et al., 2012) [15]. Using full-depth measurements from marsh cores, we estimate the carbon stock of five salt marshes in the highly urbanized estuary of Jamaica Bay, New York and argue that partial-depth measurements can underestimate carbon stocks. These estimates use calculated carbon content and probe depth data of these marshes collected between 2000 and 2019, applying this data across the full area of the marsh obtained from satellite imagery. Carbon density measurements are then multiplied by the full-depth volume of the marshes to create an estimate of total carbon stock. In addition to calculating present-day estimates, we compare our carbon stock estimates to historical Jamaica Bay imagery to calculate historical carbon stocks and carbon loss. The carbon stock estimates presented here show a 95% carbon stock loss between 1885 and 2019 in Jamaica Bay and highlight the severe underestimation of carbon stocks without full-depth calculations. These findings have important implications for disappearing salt marshes with regard to the global carbon cycle and the incorporation of belowground carbon into global climate models. The findings are increasingly relevant for advocacy efforts aiming to conserve these marshes with sea level rise.

Tidal wetlands↗

NASA NTRS1975

Digital image processing of vascular angiograms

A computer image processing technique was developed to estimate the degree of atherosclerosis in the human femoral artery. With an angiographic film of the vessel as input, the computer was programmed to estimate vessel abnormality through a series of measurements, some derived primarily from the vessel edge information and others from optical density variations within the lumen shadow. These measurements were combined into an atherosclerosis index, which was found to correlate well with both visual and chemical estimates of atherosclerotic disease.

Selzer, R. H.↗

NASA NTRS2023

Evaluation of SWER(Ze) Relationships by Precipitation Imaging Package (PIP) during ICE-POP 2018

Improving estimation of snow water equivalent rate (SWER) from radar reflectivity (Ze), known as a SWER(Ze) relationship, is a priority for NASA’s Global Precipitation Measurement (GPM) mission ground validation program as it is needed to comprehensively validate spaceborne precipitation retrievals. This study investigates the performance of eight operational and four research-based SWER(Ze) relationships utilizing Precipitation Imaging Probe (PIP) observations from the International Collaborative Experiment for Pyeongchang 2018 Olympic and Paralympic Winter Games (ICE-POP 2018) field campaign. During ICE-POP 2018, there were 10 snow events that are classified by synoptic conditions as either cold low or warm low, and a SWER(Ze) relationship is derived for each event. Additionally, a SWER(Ze) relationship is derived for each synoptic classification by merging all events within each class. Two new types of SWER(Ze) relationships are derived from PIP measurements of bulk density and habit classification. These two physically based SWER(Ze) relationships provided superior estimates of SWER when compared to the operational, event-specific, and synoptic SWER(Ze) relationships. For estimates of the event snow water equivalent total, the event-specific, synoptic, and best-performing operational SWER(Ze) relationships outperformed the physically based SWER(Ze) relationship, although the physically based relationships still performed well. This study recommends using the density or habit-based SWER(Ze) relationships for microphysical studies, whereas the other SWER(Ze) relationships are better suited toward hydrologic application.

Ali Tokay↗

NASA NTRS1995

A far-infrared spectral line survey of 23 infrared-bright Galaxy nuclei

We present results from a KAO survey of fine-structure lines observed in 23 infrared-luminous galaxies. One or more of the following lines was observed and/or detected in each galaxy: (S III) 19, 33 microns, (Ne V) 24 microns, (O IV) 26 microns, (Fe II) 26 microns, (Si II) 35 microns, (O III) 52, 88 microns, (0 I) 63, 146 microns, (N III) 57 micro ns, (N II) 122, 205 microns, (C II) 158 microns. The galaxies span a wide range of morphologies (irregular to grand design), have varying metallicities, and include mergers, AGN's, and starburst systems. The observations were made beginning in 1988 using the facility Cryogenic Grating Spectrometer onboard the KAO at a typical resolution of approximately 60-140 km/s and with a 30-44 deg beam. We interpret the (C II) and (O I) fluxes, along with previous measurements of the IR continuum fluxes, in the context of photo dissociation region (PDR) models (Tielens & Hollenbach 1985; Wolfire et al. 1990). With these models, we obtain estimates of the typical interstellar UV fields incident on the line emitting regions (102-104 times the local interstellar radiation field) and the total masses (10(exp 7)-10(exp 8) Solar Mass), densities (10(exp 3)-10(exp 4)/cu cm), and temperatures (100-250 K) of the warm atomic gas. The (O III) (52/88) and (S III) (33/19) line flux ratios constrain the range of electron densities and pressures found within the ionized regions. The (O III) and (S III) lines also provide estimates of the effective temperature of the ionizing stars and elemental abundances within the ionized regions of these galactic nuclei. Our measurements imply typical gas pressures of nT approximately 5 x 10(exp 6)/cu cm K and typical upper mass cutoffs of 25-35 Solar Mass. The low-metallicity systems show high (C II)/CO and (O I)/CO flux ratios, 3-5 times the Milky Way value, indicating that they contain a larger fraction of photodissociated gas relative to the molecular material.

Lord, Steven D.↗

NASA NTRS1981

The formation of arcs in the dynamic spectra of Jovian decameter bursts

A model is presented that accounts for several features of the dynamic spectral arcs observed at decameter wavelengths by the planetary radio astronomy experiment on Voyagers 1 and 2. It is shown that refraction of an extraordinary mode wave initially excited and nearly orthogonal to the local magnetic field is significantly influenced by the local plasma density. The source of the radiation is on the L = 6 flux, and the emission cone angle of the sheet is chosen to vary with frequency so that it is relatively small at both high and low frequencies while about 80 deg at intermediate frequencies. This functional dependence of cone angle on frequency appears to be consistent with estimates of refraction of the ordinary mode in a source region where the electron density is greater than a few hundred per cu cm.

Goldstein, M. L.↗

NASA NTRS2011

Onboard Atmospheric Modeling and Prediction for Autonomous Aerobraking Missions

Aerobraking has proven to be an effective means of increasing the science payload for planetary orbiting missions and/or for enabling the use of less expensive launch vehicles. Though aerobraking has numerous benefits, large operations cost have been required to maintain the aerobraking time line without violating aerodynamic heating or other constraints. Two operations functions have been performed on an orbit by orbit basis to estimate atmospheric properties relevant to aerobraking. The Navigation team typically solves for an atmospheric density scale factor using DSN tracking data and the atmospheric modeling team uses telemetric accelerometer data to recover atmospheric density profiles. After some effort, decisions are made about the need for orbit trim maneuvers to adjust periapsis altitude to stay within the aerobraking corridor. Autonomous aerobraking would reduce the need for many ground based tasks. To be successful, atmospheric modeling must be performed on the vehicle in near real time. This paper discusses the issues associated with estimating the planetary atmosphere onboard and evaluates a number of the options for Mars, Venus and Titan aerobraking missions.

Tolson, Robert H.↗

NASA NTRS1994

Optical studies of interstellar material in low density regions of the Galaxy

We analyze high-resolution Na I and Ca II interstellar absorption line data obtained in an earlier spectroscopic survey of 57 stars along extended sight lines through the Galactic disk and halo. We find that the Na I lines trace a diffuse cloudy medium and the CA II lines trace both the cloudy medium and a more extended (intercloud) medium. High latitude and interarm sight lines that do not cross spiral arms have clouds that are more diffuse on average than those along sight lines that cross spiral arms. Spiral structure may play an important role in determinating the average absorption properties along extended sight lines and/or interesting physical differences may exist between sight lines that cross spiral arms and those that do not. These might include a harder radiation field and/or higher electron tempertures along the high latitude and 'clean' interarm sight lines. On average, 10% of the Ca II column density occurs at velocities forbidden by the Galactic rotation law by more than 10 km/s. In contrast, only a small precentage of the Na I column density occurs at these velocites. The Ca II to Na I ratio increases by a factor of 15 over forbidden velocities from 0 to 50 km/s and rises rapidly thereafter. A two component model of the Ca II column density per unit velocity over the range l = 325 deg to 360 deg indicates that two distinct distributions exists, one with sigma = 8 km/s and one with sigma = 21 km/s. As much as 60% of the Ca II column density at forbidden velocities may be associated with the faster distribution, which we attribute to warm intercloud material. We estimate expontential scale heights of 0.4-0.5 kpc for the neutral gas traced by the E(B-V), Na I, and H I distributions along the low density sight lines, and we find that Ca II has a larger scale height of 0.8 kpc.

Sembach, K. R.↗

DOE OSTI2025

SOLEDGE3X full vessel plasma boundary simulations of ITER non-active phase plasmas

The onset of detachment in the ITER machine is analyzed in this work through the help of 2D-axisymmetric boundary plasma simulations with the SOLEDGE3X-EIRENE code, which features a numerical domain for the plasma solver extending up to the first wall. The plasma boundary is computed in scenarios from the first non-active phase of ITER, in pure H and at 20 MW. This set of simulations is used in two aspects: first, to study the plasma detachment in the divertor, and second, the plasma conditions, fluxes, and beryllium erosion at the first wall. Here, the code results are also compared to those obtained with the well-established SOLPS-ITER code, which includes a plasma numerical domain only covering the main SOL. Results show an increase in the SOL width λ q with increasing density, and a detailed analysis is carried out, for the first time, on each of the different plasma-neutral interactions in the code’s physics model in EIRENE. The gross beryllium erosion rates of first wall panels are estimated from 2D simulations, with the aim of assessing their sensitivity to two parameters: the divertor density regime, and the presence of density shoulders in the far-SOL formed by enhanced perpendicular transport at this location. The erosion contributions from neutrals and ions are considered in each case, and the charge-exchange atoms fluxes and energy distributions are provided, highlighting the two atom populations (cold and charge-exchange).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Angular systematics-free cosmological analysis of galaxy clustering in configuration space

ABSTRACT Galaxy redshift surveys are subject to incompleteness and inhomogeneous sampling due to the various constraints inherent to spectroscopic observations. This can introduce systematic errors on the summary statistics of interest, which need to be mitigated in cosmological analysis to achieve high accuracy. Standard practices involve applying weighting schemes based on completeness estimates across the survey footprint, possibly supplemented with additional weighting schemes accounting for density-dependent effects. In this work, we concentrate on pure angular systematics and describe an alternative approach consisting in analysing the galaxy two-point correlation function where angular modes are nulled. By construction, this procedure removes all possible known and unknown sources of angular observational systematics, but also part of the cosmological signal. We use a modified Landy–Szalay estimator for the two-point correlation function that relies on an additional random catalogue where angular positions are randomly drawn from the galaxy catalogue, and provide an analytical model to describe this modified statistic. We test the model by performing an analysis of the full anisotropic clustering in mock catalogues of luminous red and emission-line galaxies at 0.43 < z < 1.1. We find that the model fully accounts for the modified correlation function in redshift space, without introducing new nuisance parameters. The derived cosmological parameters from the analysis of baryon acoustic oscillations and redshift-space distortions display slightly larger statistical uncertainties, mostly for the growth rate of structure parameter fσ8 that exhibits a $50{{\ \rm per\ cent}}$ statistical error increase, but free from angular systematic error.

79 ASTRONOMY AND ASTROPHYSICS↗

Refine your search to explore more results.