Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “computing systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Practical dose point-based methods to characterize dose distribution in a stationary elliptical body phantom for a cone-beam C-arm CT system

Purpose: To propose new dose point measurement-based metrics to characterize the dose distributions and the mean dose from a single partial rotation of an automatic exposure control-enabled, C-arm-based, wide cone angle computed tomography system over a stationary, large, body-shaped phantom. Methods: A small 0.6 cm{sup 3} ion chamber (IC) was used to measure the radiation dose in an elliptical body-shaped phantom made of tissue-equivalent material. The IC was placed at 23 well-distributed holes in the central and peripheral regions of the phantom and dose was recorded for six acquisition protocols with different combinations of minimum kVp (109 and 125 kVp) and z-collimator aperture (full: 22.2 cm; medium: 14.0 cm; small: 8.4 cm). Monte Carlo (MC) simulations were carried out to generate complete 2D dose distributions in the central plane (z = 0). The MC model was validated at the 23 dose points against IC experimental data. The planar dose distributions were then estimated using subsets of the point dose measurements using two proposed methods: (1) the proximity-based weighting method (method 1) and (2) the dose point surface fitting method (method 2). Twenty-eight different dose point distributions with six different point number cases (4, 5, 6, 7, 14, and 23 dose points) were evaluated to determine the optimal number of dose points and their placement in the phantom. The performances of the methods were determined by comparing their results with those of the validated MC simulations. The performances of the methods in the presence of measurement uncertainties were evaluated. Results: The 5-, 6-, and 7-point cases had differences below 2%, ranging from 1.0% to 1.7% for both methods, which is a performance comparable to that of the methods with a relatively large number of points, i.e., the 14- and 23-point cases. However, with the 4-point case, the performances of the two methods decreased sharply. Among the 4-, 5-, 6-, and 7-point cases, the 7-point case (1.0% [±0.6%] difference) and the 6-point case (0.7% [±0.6%] difference) performed best for method 1 and method 2, respectively. Moreover, method 2 demonstrated high-fidelity surface reconstruction with as few as 5 points, showing pixelwise absolute differences of 3.80 mGy (±0.32 mGy). Although the performance was shown to be sensitive to the phantom displacement from the isocenter, the performance changed by less than 2% for shifts up to 2 cm in the x- and y-axes in the central phantom plane. Conclusions: With as few as five points, method 1 and method 2 were able to compute the mean dose with reasonable accuracy, demonstrating differences of 1.7% (±1.2%) and 1.3% (±1.0%), respectively. A larger number of points do not necessarily guarantee better performance of the methods; optimal choice of point placement is necessary. The performance of the methods is sensitive to the alignment of the center of the body phantom relative to the isocenter. In body applications where dose distributions are important, method 2 is a better choice than method 1, as it reconstructs the dose surface with high fidelity, using as few as five points.

60 APPLIED LIFE SCIENCES↗

End-to-end data movement using MPI-IO over routed terabits infrastructures. In: NDM '13 Proceedings of the Third International Workshop on Network-Aware Data Management, Article No. 9

Scientific discovery is nowadays driven by large-scale simulations running on massively parallel high-performance computing (HPC) systems. These applications each generate a large amount of data, which then needs to be post-processed for example for data mining or visualization. Unfortunately, the computing platform used for post processing might be different from the one on which the data is initially generated, introducing the challenge of moving large amount of data between computing platforms. This is especially challenging when these two platforms are geographically separated since the data needs to be moved between computing facilities. This is even more critical when scientists tightly couple their domain specific applications with a post processing application. The paper presents a solution for the data transfer between MPI applications using a dedicated wide area network (WAN) terabit infrastructure. The proposed solution is based on parallel access to data files and the Message Passing Interface (MPI) over the Common Communication Infrastructure (CCI) for the data transfer over a routed infrastructure. In the context of this research, the Energy Sciences Network (ESnet) of the U.S. Department of Energy (DOE) is targeted for the transfer of data between DOE national laboratories.

Vallée, Geoffroy↗

End-to-End Data Movement Using MPI-IO Over Routed Terabots Infrastructures

Scientific discovery is nowadays driven by large-scale simulations running on massively parallel high-performance computing (HPC) systems. These applications each generate a large amount of data, which then needs to be post-processed for example for data mining or visualization. Unfortunately, the computing platform used for post processing might be different from the one on which the data is initially generated, introducing the challenge of moving large amount of data between computing platforms. This is especially challenging when these two platforms are geographically separated since the data needs to be moved between computing facilities. This is even more critical when scientists tightly couple their domain specific applications with a post processing application. The paper presents a solution for the data transfer between MPI applications using a dedicated wide area network (WAN) terabit infrastructure. The proposed solution is based on parallel access to data files and the Message Passing Interface (MPI) over the Common Communication Infrastructure (CCI) for the data transfer over a routed infrastructure. In the context of this research, the Energy Sciences Network (ESnet) of the U.S. Department of Energy (DOE) is targeted for the transfer of data between DOE national laboratories.

Vallee, Geoffroy R↗

High Performance Semantic Factoring of Giga-Scale Semantic Graph Databases

As semantic graph database technology grows to address components ranging from extant large triple stores to SPARQL endpoints over SQL-structured relational databases, it will become increasingly important to be able to bring high performance computational resources to bear on their analysis, interpretation, and visualization, especially with respect to their innate semantic structure. Our research group built a novel high performance hybrid system comprising computational capability for semantic graph database processing utilizing the large multithreaded architecture of the Cray XMT platform, conventional clusters, and large data stores. In this paper we describe that architecture, and present the results of our deploying that for the analysis of the Billion Triple dataset with respect to its semantic factors.

Semantic graph databases, high performance computi↗

I/O in Machine Learning Applications on HPC Systems: A 360-degree Survey

Growing interest in Artificial Intelligence (AI) has resulted in a surge in demand for faster methods of Machine Learning (ML) model training and inference. This demand for speed has prompted the use of high performance computing (HPC) systems that excel in managing distributed workloads. Because data is the main fuel for AI applications, the performance of the storage and I/O subsystem of HPC systems is critical. In the past, HPC applications accessed large portions of data written by simulations or experiments or ingested data for visualizations or analysis tasks. ML workloads perform small reads spread across a large number of random files. This shift of I/O access patterns poses several challenges to modern parallel storage systems. In this paper, we survey I/O in ML applications on HPC systems, and target literature within a 6-year time window from 2019 to 2024. We define the scope of the survey, provide an overview of the common phases of ML, review available profilers and benchmarks, examine the I/O patterns encountered during offline data preparation, training, and inference, and explore I/O optimizations utilized in modern ML frameworks and proposed in recent literature. Lastly, we seek to expose research gaps that could spawn further R&D.

97 MATHEMATICS AND COMPUTING↗

Cavity Control Algorithms

A LLRF system typically incorporates either a heterodyne or direct sampling technique, followed by fast ADCs, then an FPGA and finally a transmitting DAC. An ultra low jitter clock system (sub-picoseconds) is required for fast sampling ADCs/DACs to preserve necessary signal to noise ratio. As a result we have universal hardware able to accommodate a variety of firmware for the specific application. The cavity control algorithm, greatly released from hardware constraints, can be developed much faster for very specific and demanding requirements. Based on the type of the accelerator (Pulsed, CW) and nature of the cavity field disturbances ( Lorentz Forces, microphonics, helium drift, temperature drift, beam load etc.) one can select a suitable controller. A generic PID feedback mechanism may be the first and easiest choice for most cases, while Kalman filtering or Adaptive control require more involved system modeling, and extra computational effort. A pulse system usually requires an additional feed forward mechanism while for a CW machine an SEL (Self Excited Loop) can be an excellent approach. Selecting the correct gains for effective control can be challenging and it depends on the beam energy spread requirements, system stability and control system scheme ( I&Q, Amplitude & Phase, SEL). Finally, the computational capability of the FPGA allows it to incorporate digital signal processing (for instance CIC(Cascaded Integrator-Comb filter), tunable IIR) as well as CORDIC ( COordinate Rotation DIgital Computer) to calculate trigonometric quantities. In this talk, a summary of popular algorithms is presented along with an example of the Jefferson Lab 12 GeV cavity field control system.

Plawski, Tomasz↗

Towards Native Execution of Deep Learning on a Leadership-Class HPC System

Large parallel machines generally offer the best parallel performance with "native execution" that is achieved using codes developed with the optimized compilers, communication libraries, and runtimes offered on the machines. In this paper, we report and analyze performance results from native execution of deep learning on a leadership-class high-performance computing (HPC) system. Using our new code called DeepEx, we present a study of the parallel speed up and convergence rates of learning achieved with native parallel execution. In the trade-off between computational parallelism and synchronized convergence, we first focus on maximizing parallelism while still obtaining convergence. Scaling results are reported from execution on up to 15,000 GPUs using two scientific data sets from atom microscopy and protein folding applications, and also using the popular ImageNet data set. In terms of the traditional measure of parallel speed up, excellent scaling is observed up to 12,000 GPUs. Additionally, accounting for convergence rates of deep learning accuracy or error, a deep learning-specific metric called "learning speed up" is also tracked. The performance results indicate the need to evaluate parallel deep learning execution in terms of learning speed up, and point to additional directions for improved exploitation of high-end HPC systems.

Yoginath, Srikanth↗

Advanced Computing Annual Report 2025 [Slides]

In Fiscal Year (FY) 2025, the National Laboratory of the Rockies (NLR) continued to advance computing as a cornerstone of energy innovation, expanding the Kestrel high-performance computing (HPC) system to 56 peak petaflops. This growth strengthened Kestrel's role as a national asset for applied energy research, enabling larger, more complex simulations and accelerating the integration of artificial intelligence (AI) methods across the laboratory's computing portfolio. In FY 2025, AI was a component of most projects running on Kestrel, underscoring its central role in modern energy science and engineering. Kestrel supported a broad and diverse set of 507 modeling and simulation projects, engaging 855 researchers across the U.S. Department of Energy's (DOE's) Office of Critical Minerals and Energy Innovation (CMEI) portfolio and other offices, as well as partners from industry, academia, and utilities. These efforts span critical materials discovery, energy systems modeling, grid modernization, advanced manufacturing, and other areas essential to strengthening U.S. energy security and competitiveness. Together, these collaborations produced 708 technical outputs, including 293 peer-reviewed publications, reflecting both the depth and impact of the science enabled by NLR's computing capabilities. This year's report highlights the growing importance and benefit of AI throughout NLR's research programs and features work by early career researchers who are helping shape the future of computing-enabled energy innovation. Explore these sections and the many project successes captured in the pages that follow.

97 MATHEMATICS AND COMPUTING↗

GMRES with embedded ensemble propagation for the efficient solution of parametric linear systems in uncertainty quantification of computational models

In a previous work, embedded ensemble propagation was proposed to improve the efficiency of sampling-based uncertainty quantification methods of computational models on emerging computational architectures. It consists of simultaneously evaluating the model for a subset of samples together, instead of evaluating them individually. A first approach introduced to solve parametric linear systems with ensemble propagation is ensemble reduction. In Krylov methods for example, this reduction consists in coupling the samples together using an inner product that sums the sample contributions. Ensemble reduction has the advantages of being able to use optimized implementations of BLAS functions and having a stopping criterion which involves only one scalar. However, the reduction potentially decreases the rate of convergence due to the gathering of the spectra of the samples. In this paper, we investigate a second approach: ensemble propagation without ensemble reduction in the case of GMRES. This second approach solves each sample simultaneously but independently to improve the convergence compared to ensemble reduction. This raises two new issues which are solved in this paper: the fact that optimized implementations of BLAS functions cannot be used anymore and that ensemble divergence, whereby individual samples within an ensemble must follow different code execution paths, can occur. We tackle those issues by implementing a high-performing ensemble GEMV and by using masks. The proposed ensemble GEMV leads to a similar cost per GMRES iteration for both approaches, i.e. with and without reduction. For illustration, we study the performances of the new linear solver in the context of a mesh tying problem. Furthermore, this example demonstrates improved ensemble propagation speed-up without reduction.

BLAS↗

Environmentally induced effects on a bipartite two-level system: Geometric phase and entanglement properties

We calculate the geometric phase of a bipartite two-level system coupled to an external environment. We analyze the reduced density matrix for an arbitrary initial state of the composite system and compute the correction to the unitary geometric phase through a kinematic approach. In all cases considered, we observe a similar structure as a function of the degree of the entanglement of the initial state. Further, we compute the entanglement entropy and concurrence of the bipartite state and analyze if there is any relation among these quantities and the geometric phase acquired during the nonunitary system's evolution. Finally, we discuss the results obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controller area network decoder (CAN-D)

A system and method for decoding an unknown automotive controller area network (“CAN”) message definitions. CAN data vehicle signal mappings are typically held in secret and varied by automotive model and year. Without knowledge of the mappings, the wealth of real-time vehicle data hidden in the automotive CAN packets is uninterpretable—impeding research, after-market tuning, efficiency and performance monitoring, fault diagnosis, and privacy-related technologies. This technology can ascertain the CAN signals' boundaries (start bit and length), endianness (byte ordering), signedness (binary-to-integer encoding) from raw CAN data. This allows conversion of CAN data to time series. Interpreting the translated CAN data's physical meaning and finding a linear mapping to standard units (e.g., knowing the signal is speed and scaling values to represent units of miles per hour) can be achieved for many signals by leveraging diagnostic standards to obtain real-time measurements of in-vehicle systems. The system and method can be integrated into lightweight hardware enabling an OBD-II plugin for real-time in-vehicle CAN decoding or run on standard computers. The system can output a standard DBC file with the signal definition information.

Verma, Kiren E.↗

Application of the locally self-consistent embedding approach to the Anderson model with non-uniform random distributions

Highlights: • Typical Medium Theory (TMT) for the Anderson Localization. • Locally Self-Consistent Multiple Scattering Method (LSMS) for Random Disordered Systems. • Linear Scaling Computational Method for Random Disordered Systems. We apply the recently developed embedding scheme for the locally self-consistent method to random disorder electrons systems. The method is based on the locally self-consistent multiple scattering theory and the typical medium theory. The locally self-consistent multiple scattering theory divides a system into many small designated local interaction zones. The subsystem within each local interaction zone is embedded in a self-consistent field from the typical medium theory. This approximation allows the study of random systems with large numbers of sites. We present results for the three dimensional Anderson model with different random disorder potential distributions. Using the typical density of states as an indicator of Anderson localization, we find that the method can capture the localization for commonly studied disorder potentials. These include the uniform distribution, the Gaussian distribution, and even the unbounded Cauchy distribution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Recommendations for Improving ASC Data Management

The Advanced Simulation & Computing (ASC) Program started in 1995 and has an essential mission that requires data stewardship for massive amounts of high performance computing data. This report provides general user requirements as determined through interviews of key users, describes the design attributes for high performance computing storage systems, and identifies improvements that would enable users to better manage their data.

97 MATHEMATICS AND COMPUTING↗

Investigations into validation of plutonium solutions for criticality safety analysis

Plutonium solution chemistry is among the most complex of all the elements in the periodic table. Under acidic conditions up to four different oxidation states can be present in significant amounts in a single solution. From the perspective of nuclear criticality safety, accurate information regarding the concentration of plutonium and other constituents in solution must be well-known in order to correctly model plutonium solution systems for analysis. This requires knowledge of the solution system along with the ability to make accurate assumptions and predictions of the chemical and physical properties of the solution system. If neutron transport methods are used to assess subcriticality in a nuclear criticality safety analysis, the models must be compared with benchmark experiments which are similar and the suitability of the computer code system must be quantified. This paper describes some investigations undertaken to support the validation of plutonium solution systems for nuclear criticality safety analysis and how the Whisper sensitivity/uncertainty (S/U) tool can provide information to support validation of such systems. Case study results for various solution systems such as aqueous plutonium nitrate, aqueous plutonium chloride and hypothetical metal-water mixture are presented. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NRAP-Open-IAM: NRAP Open Source Integrated Assessment Model

Note: This is the last version (a2.6.1) of NRAP-Open-IAM released during NRAP Phase II in 2022. The latest version of NRAP-Open-IAM is available here: https://edx.netl.doe.gov/dataset/phase-iii-nrap-open-iam NRAP-Open-IAM is an open-source software product that enables quantification of containment effectiveness and leakage risk at storage sites in the context of system uncertainties and variability. NRAP-Open-IAM represents the next-generation in a line of systems-based computational models developed for quantitative geological carbon storage (GCS) risk assessment. The model comprises a set of reduced-order and analytical models of various components of the GCS system, potential leakage pathways, receptors of concern including impact to groundwater resources and the atmosphere, a framework to support stochastic simulation, time stepping, uncertainty quantification, other analytical functionality for scenario and risk-performance evaluation, and a basic graphical user interface to support scenario development, data input simulation definition, and basic post-processing and results display. As the NRAP Open-IAM functionality continues to evolve, we continue to add to its capability to develop quantitative, probabilistic, and time-dependent profiles of the evolution of risk at a GCS site and evaluate the influence of uncertain parameters on uncertainty in predicted risk. It can be used to quantify the dynamics of reservoir saturation plume and pressure-affected area, for evaluation of the area of potential groundwater impact (i.e., Area of Review) and monitoring requirements to support cost and regulatory analysis, and for consideration of different post-injection site care and closure scenarios. This submission contains the current version of NRAP-Open-IAM available for evaluation and testing. To use the NRAP-Open-IAM, download the source code (https://edx.netl.doe.gov/dataset/08f396c8-bc5f-44ad-a028-6e98a6ea6d70/resource/4c24a3da-3b40-4ffe-9892-c807ae9f8760) then open the NRAP-Open-IAM user's guide (https://edx.netl.doe.gov/dataset/08f396c8-bc5f-44ad-a028-6e98a6ea6d70/resource/8b27335a-343c-4836-b8a3-3ad0bdc9e669) to read more about the tool. Installation instructions for Windows, Mac, and Linux can be found in the "installers" folder of the extracted NRAP-Open-IAM folder and describe setup of environment (e.g., Python libraries) needed for proper work of the tool. Test of installation can be done by running "python openiam_setup_tests.py" in the "setup" folder. The installation test also runs a test suite to see if the NRAP-Open-IAM has been installed correctly. To run the test suite separately, run "python iam_test.py" in the "test" folder. User's guide: https://edx.netl.doe.gov/dataset/08f396c8-bc5f-44ad-a028-6e98a6ea6d70/resource/8b27335a-343c-4836-b8a3-3ad0bdc9e669 Developer's guide: https://edx.netl.doe.gov/dataset/08f396c8-bc5f-44ad-a028-6e98a6ea6d70/resource/3bc6ee7d-609d-4eb6-80ba-fa6130ee0313 Reservoir simulation data used in some examples distributed with NRAP-Open-IAM: - Kimberlina: https://edx.netl.doe.gov/dataset/08f396c8-bc5f-44ad-a028-6e98a6ea6d70/resource/eb62cece-61b2-4037-9b6d-32407dde2ab8 - Kimberlina (compartmentalized): https://edx.netl.doe.gov/dataset/08f396c8-bc5f-44ad-a028-6e98a6ea6d70/resource/366f9530-3b32-4b84-affe-ab2df1d9a8b5 - FutureGen 2.0: https://edx.netl.doe.gov/dataset/futuregen-2-0-1008-simulation-reservoir-lookup-table NRAP-Open-IAM GitLab repository: https://gitlab.com/NRAP/OpenIAM Related publications: - Bacon, D., Yonkofski, C., Brown, C., Demirkanli, D. and Whiting, J., 2019. Risk-based post injection site care and monitoring for commercial-scale carbon storage: Reevaluation of the FutureGen 2.0 site using NRAP-Open-IAM and DREAM. International Journal of Greenhouse Gas Control 90: 102784. - Bacon, D. Demirkanli, D., and White, S., 2020. Probabilistic risk-based Area of Review (AoR) determination for a deep-saline carbon storage site. International Journal of Greenhouse Gas Control 102: 103153. - Harp, D., Oldenburg, C., and Pawar, R., 2019. A metric for evaluating conformance robustness during geologic CO2 sequestration operations. International Journal of Greenhouse Gas Control 85: 100-108. - Lackey, G., Vasylkivska, V., Huerta, N., King, S., and Dilmore, R., 2019. Managing well leakage risks at a geologic carbon storage site with many wells, International Journal of Greenhouse Gas Control, 88 :182-194. - Vasylkivska, V., Dilmore, R., Lackey, G., Zhang, Y., King, S., Bacon, D., Chen, B., Mansoor, K., and Harp, D., 2021. NRAP-Open-IAM: A flexible open-source integrated assessment model for geologic carbon storage risk assessment and management, Environmental Modelling & Software, 143: 105114. Presentations: - Chen, B., Harp, D., and Pawar, R., A data assimilation approach (ES-MDA) coupling with NRAP-Open-IAM for quantifying uncertainty reduction in geological CO2 sequestration. AGUFM 2019: T44A-02. - Chen, B., and Harp, D., Improving risk analysis precision for geologic CO2 sequestration by quantifying the uncertainty reduction before and after acquiring monitoring data. 14th Greenhouse Gas Control Technologies Conference, Melbourne, Australia, 2018, pp. 21-26. - Harp, D., National Risk Assessment Partnership Task 2: Containment Assurance. No. LA-UR-19-28654, Los Alamos National Laboratory (LANL), Los Alamos, NM (United States), 2019. - Vasylkivska, V., King, S., Bacon, D., Harp, D., Chen, B., Mansoor, K., Onishi, T., Yang, Y., Zhang, Y., and Keating, E., NRAP-Open-IAM: An open-source integrated assessment model, poster, Mastering the Subsurface Through Technology Innovation, Partnerships and Collaboration: Carbon Storage and Oil and Natural Gas Technologies Review Meeting, Pittsburgh, PA, August 13-16, 2018. - Vasylkivska, V., Lackey, G., King, S., Wentworth, A., Huerta, N., Creason, C., DiGiulio, J., Yang, Y., and Dilmore, R., Long-term risk analysis of a geologic CO2 storage project during the post-injection period, SIAM Conference on Computational Science and Engineering, Spokane, WA, February 25-March 1, 2019. - Vasylkivska, V., Overview of the NRAP-Open-IAM tool for carbon storage (beta release), 2019 Annual NRAP Tool Users Meeting, Pittsburgh, PA, August 27, 2019. - Vasylkivska, V., Bacon, D., Chen, B., Dilmore, R., Harp, D., King, S., Lackey, G., Lindner, E., Liu, G., Mansoor, K. and Zhang, Y., NRAP-Open-IAM: A new, open-source code for integrated assessment of geologic carbon storage containment effectiveness and leakage risk, poster, American Geophysical Union Fall Meeting 2020 (virtual meeting), December 2020. - Vasylkivska, V., NRAP open-source integrated assessment model and relevant application, oral presentation, NRAP workshop "NRAP Tools for Geologic Carbon Storage Risk-Based Decision Making" held in conjunction with Groundwater Protection Council (GWPC) 2021 Annual Forum (virtual meeting), Salt Lake City, UT, September 2021. - Vasylkivska, V., NRAP-Open-IAM: open-source integrated assessment model, digital poster/demonstration, software demonstration session, 2022 Carbon Management Project Review Meeting, August 16, 2022

AoR↗

Artificial Intelligence for Multiphysics Nuclear Design Optimization with Additive Manufacturing

The geometric flexibility of additively manufactured metals and ceramics generates a very large and open design space that requires advanced modeling and simulation tools for physics simulations and the rigorous definition of design problems. This effort deploys artificial intelligence (AI) and machine learning (ML) algorithms to understand the design space, evaluate potential designs, and more efficiently generate optimized results. The Transformational Challenge Reactor (TCR) program is leveraging advances in several scientific areas—including materials, manufacturing, sensors and control systems, data analytics, and high-fidelity modeling and simulation—to accelerate the design, manufacturing, qualification, and deployment of advanced nuclear energy systems. Through a manufacturing-informed design approach, the TCR program seeks to integrate digital data for rapid nuclear innovation; accelerate the adoption of advances in manufacturing, materials, and computational sciences for nuclear applications; and dramatically reduce deployment costs and timelines for new nuclear reactor technologies. This report documents efforts under the TCR program to leverage advanced modeling and simulation techniques driven by AI/ML algorithms on high-performance computing (HPC) systems to yield more optimized TCR core designs. A multiphysics ML surrogate model was developed to run on the HPC architectures. The surrogate model is trained on high-fidelity simulation data of coupled neutronics and thermofluidics and is used to quickly evaluate thousands of candidate core designs in parallel, which drives the evolution of the cooling channel shapes to minimize temperature peaking and material stress. Outcomes from these activities provide design information and feedback into the core design efforts.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Computing Legacy Software Behavior to Understand Functionality and Security Properties: An IBM/370 Demonstration

Organizations maintaining mainframe legacy software can benefit from code modernization and incorporation of security capabilities to address the current threat environment. Oak Ridge National Laboratory is developing the Hyperion system to compute the behavior of software as a means to gain understanding of software functionality and security properties. Computation of functionality is critical to revealing security attributes, which are in fact specialized functional behaviors of software. Oak Ridge is collaborating with MITRE Corporation to conduct a demonstration project to compute behavior of legacy IBM Assembly Language code for a federal agency. The ultimate goal is to understand functionality and security vulnerabilities as a basis for code modernization. This paper reports on the first phase, to define functional semantics for IBM Assembly instructions and conduct behavior computation experiments.

reverse engineering↗

Refine your search to explore more results.