Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “components”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

THE HOT COMPONENTS OF AM CVn HELIUM CATACLYSMICS

We present the results of a multi-component synthetic spectral analysis of the archival far-ultraviolet spectra of the hot components of several AM CVn double degenerate interacting binaries with known distances from trigonometric parallaxes. Our analysis was carried out using the code BINSYN, which takes into account the donor companion star, the shock front which forms at the disk edge, and the FUV and NUV energy distribution. We fixed the distance of each system at its parallax-derived value and adopted appropriate values of orbital inclination and white dwarf (WD) mass. We find that the accretion-heated 'DO/DB' WDs are contributing significantly to the FUV flux in five of the systems (ES Ceti, CR Boo, V803 Cen, HP Lib, GP Com). In three of the systems, GP Com, ES Ceti, and CR Boo, the WD dominates the FUV/NUV flux. We present model-derived accretion rates which agree with the low end of the range of accretion rates derived earlier from blackbody fits over the entire spectral energy distribution. We find that the WD in ES Ceti is very likely not a direct impact accretor but has a small disk. The WD in ES Ceti has T{sub eff} {approx} 40, 000 {+-} 10, 000 K. This is far cooler than the previous estimate of Espaillat et al.. We find that the WD in GP Com has T{sub eff} = 14, 800 {+-} 500 K, which is hotter than the previously estimated temperature of 11,000 K. We present a comparison between our empirical results and current theoretical predictions for these systems.

79 ASTRONOMY AND ASTROPHYSICS↗

A THIRD MASSIVE STAR COMPONENT IN THE {sigma} ORIONIS AB SYSTEM

We report on the detection of a third massive star component in the {sigma} Orionis AB system, traditionally considered as a binary system. The system has been monitored by the IACOB Spectroscopic Survey of Northern Massive Stars program, obtaining 23 high-resolution FIES-NOT spectra with a time span of {approx}2.5 years. The analysis of the radial velocity curves of the two spectroscopic components observed in the spectra has allowed us to obtain the orbital parameters of the system, resulting in a high eccentric orbit (e {approx} 0.78) with an orbital period of 143.5 {+-} 0.5 days. This result implies the actual presence of three stars in the {sigma} Orionis AB system when combined with previous results obtained from the study of the astrometric orbit (with an estimated period of {approx}157 years).

79 ASTRONOMY AND ASTROPHYSICS↗

GRB 081029: A GAMMA-RAY BURST WITH A MULTI-COMPONENT AFTERGLOW

We present an analysis of the unusual optical light curve of the gamma-ray burst GRB 081029, a long-soft burst with a redshift of z = 3.8479. We combine X-ray and optical observations from the Swift X-Ray Telescope and the Swift UltraViolet/Optical Telescope with ground-based optical and infrared data obtained using the REM, ROTSE, and CTIO 1.3 m telescopes to construct a detailed data set extending from 86 s to {approx}100000 s after the BAT trigger. Our data cover a wide energy range from 10 keV to 0.77 eV (1.24 A-16000 A). The X-ray afterglow shows a shallow initial decay followed by a rapid decay starting at about 18000 s. The optical and infrared afterglow, however, shows an uncharacteristic rise at about 3000 s that does not correspond to any feature in the X-ray light curve. Our data are not consistent with synchrotron radiation from a jet interacting with an external medium, a two-component jet, or continuous energy injection from the central engine. We find that the optical light curves can be broadly explained by a collision between two ejecta shells within a two-component jet. A growing number of gamma-ray-burst afterglows are consistent with complex jets, which suggests that some (or all) gamma-ray-burst jets are complex and will require detailed modeling to fully understand them.

79 ASTRONOMY AND ASTROPHYSICS↗

A MULTI-COMPONENT ANALYSIS INDICATES A POSITRONIC MAJOR FLARE IN GRS 1915+105

A modeling strategy that is adapted to the study of synchrotron-self-absorbed plasmoids that was developed for the quasar Mrk 231 by Reynolds et al. is applied to the microquasar GRS 1915+105. The major flare from 1993 December shows spectral evidence of three such self-absorbed components. The analysis yields an estimate of the power that is required to eject the plasmoids from the central engine that is independent of other estimates that exist in the literature for different flares. The technique has an advantage since the absorbed spectrum contains an independent constraint provided by the optical depth at each epoch of observation. The modeling procedure presented here self-consistently determines the dimensions of the radio-emitting plasma from the spectral shape. Thus, structural dimensions are determined analytically that can be much smaller than interferometer beamwidths. A synthesis of the time evolution of the components allows one to address the fundamental uncertainties in previous estimates. First, the plasma is not protonic, but comprises an electron-positron gas. The minimum electron energy is determined to be less than six times the electron rest-mass energy. The analysis also indicates that the plasmoids are ejected from the central engine magnetically dominated. The temporal behavior is one of magnetic energy conversion to mechanical energy as the plasmoids approach equipartition. The time-dependent models bound the impulsive energy flux, Q, required to eject the individual major flare plasmoids from the central engine to, 4.1 Multiplication-Sign 10{sup 37} erg s{sup -1} < Q < 6.1 Multiplication-Sign 10{sup 38} erg s{sup -1}.

79 ASTRONOMY AND ASTROPHYSICS↗

SINGLE- AND TWO-COMPONENT GAMMA-RAY BURST SPECTRA IN THE FERMI GBM-LAT ENERGY RANGE

Most Fermi gamma-ray burst spectra appear as either a broken power law extending to GeV energies or as a broken power with a separate GeV power-law component. Here we show that such spectra can be understood in terms of magnetically dominated relativistic jets where a dissipative photosphere produces the prompt MeV emission, which is extended into the GeV range by inverse Compton scattering in the external shock, with possible contributions from a reverse shock as well. The bulk Lorentz factors required in these models are in the range of 300-600, and the MeV-GeV time delays arise naturally. In some cases an optical flash and a sub-dominant thermal component are also present.

79 ASTRONOMY AND ASTROPHYSICS↗

DIFFERENTIAL EMISSION MEASURE ANALYSIS OF MULTIPLE STRUCTURAL COMPONENTS OF CORONAL MASS EJECTIONS IN THE INNER CORONA

In this paper, we study the temperature and density properties of multiple structural components of coronal mass ejections (CMEs) using differential emission measure (DEM) analysis. The DEM analysis is based on the six-passband EUV observations of solar corona from the Atmospheric Imaging Assembly on board the Solar Dynamic Observatory. The structural components studied include the hot channel in the core region (presumably the magnetic flux rope of the CME), the bright loop-like leading front (LF), and coronal dimming in the wake of the CME. We find that the presumed flux rope has the highest average temperature (>8 MK) and density ({approx}1.0 Multiplication-Sign 10{sup 9} cm{sup -3}), resulting in an enhanced emission measure over a broad temperature range (3 {<=} T(MK) {<=} 20). On the other hand, the CME LF has a relatively cool temperature ({approx}2 MK) and a narrow temperature distribution similar to the pre-eruption coronal temperature (1 {<=} T(MK) {<=} 3). The density in the LF, however, is increased by 2%-32% compared with that of the pre-eruption corona, depending on the event and location. In coronal dimmings, the temperature is more broadly distributed (1 {<=} T(MK) {<=} 4), but the density decreases by {approx}35%-{approx}40%. These observational results show that: (1) CME core regions are significantly heated, presumably through magnetic reconnection; (2) CME LFs are a consequence of compression of ambient plasma caused by the expansion of the CME core region; and (3) the dimmings are largely caused by the plasma rarefaction associated with the eruption.

79 ASTRONOMY AND ASTROPHYSICS↗

The cool component and the dichotomy, lateral expansion, and axial rotation of solar X-ray jets

We present results from a study of 54 polar X-ray jets that were observed in coronal X-ray movies from the X-ray Telescope on Hinode and had simultaneous coverage in movies of the cooler transition region (T ∼ 10{sup 5} K) taken in the He II 304 Å band of the Atmospheric Imaging Assembly (AIA) on Solar Dynamics Observatory. These dual observations verify the standard-jet/blowout-jet dichotomy of polar X-ray jets previously found primarily from XRT movies alone. In accord with models of blowout jets and standard jets, the AIA 304 Å movies show a cool (T ∼ 10{sup 5} K) component in nearly all blowout X-ray jets and in a small minority of standard X-ray jets, obvious lateral expansion in blowout X-ray jets but none in standard X-ray jets, and obvious axial rotation in both blowout X-ray jets and standard X-ray jets. In our sample, the number of turns of axial rotation in the cool-component standard X-ray jets is typical of that in the blowout X-ray jets, suggesting that the closed bipolar magnetic field in the jet base has substantial twist not only in all blowout X-ray jets but also in many standard X-ray jets. We point out that our results for the dichotomy, lateral expansion, and axial rotation of X-ray jets add credence to published speculation that type-II spicules are miniature analogs of X-ray jets, are generated by granule-size emerging bipoles, and thereby carry enough energy to power the corona and solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗

IMPROVED SEARCH OF PRINCIPAL COMPONENT ANALYSIS DATABASES FOR SPECTRO-POLARIMETRIC INVERSION

We describe a simple technique for the acceleration of spectro-polarimetric inversions based on principal component analysis (PCA) of Stokes profiles. This technique involves the indexing of the database models based on the sign of the projections (PCA coefficients) of the first few relevant orders of principal components of the four Stokes parameters. In this way, each model in the database can be attributed a distinctive binary number of 2{sup 4n} bits, where n is the number of PCA orders used for the indexing. Each of these binary numbers (indices) identifies a group of ''compatible'' models for the inversion of a given set of observed Stokes profiles sharing the same index. The complete set of the binary numbers so constructed evidently determines a partition of the database. The search of the database for the PCA inversion of spectro-polarimetric data can profit greatly from this indexing. In practical cases it becomes possible to approach the ideal acceleration factor of 2{sup 4n} as compared to the systematic search of a non-indexed database for a traditional PCA inversion. This indexing method relies on the existence of a physical meaning in the sign of the PCA coefficients of a model. For this reason, the presence of model ambiguities and of spectro-polarimetric noise in the observations limits in practice the number n of relevant PCA orders that can be used for the indexing.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A LINGERING NON-THERMAL COMPONENT IN THE GAMMA-RAY BURST PROMPT EMISSION: PREDICTING GeV EMISSION FROM THE MeV SPECTRUM

The high-energy GeV emission of gamma-ray bursts (GRBs) detected by Fermi/LAT has a significantly different morphology compared to the lower energy MeV emission detected by Fermi/GBM. Though the late-time GeV emission is believed to be synchrotron radiation produced via an external shock, this emission as early as the prompt phase is puzzling. A meaningful connection between these two emissions can be drawn only by an accurate description of the prompt MeV spectrum. We perform a time-resolved spectroscopy of the Gamma-ray Burst Monitor (GBM) data of long GRBs with significant GeV emission, using a model consisting of two blackbodies and a power law. We examine in detail the evolution of the spectral components and find that GRBs with high GeV emission (GRB 090902B and GRB 090926A) have a delayed onset of the power-law component in the GBM spectrum, which lingers at the later part of the prompt emission. This behavior mimics the flux evolution in the Large Area Telescope (LAT). In contrast, bright GBM GRBs with an order of magnitude lower GeV emission (GRB 100724B and GRB 091003) show a coupled variability of the total and the power-law flux. Further, by analyzing the data for a set of 17 GRBs, we find a strong correlation between the power-law fluence in the MeV and the LAT fluence (Pearson correlation: r = 0.88 and Spearman correlation: ρ = 0.81). We demonstrate that this correlation is not influenced by the correlation between the total and the power-law fluences at a confidence level of 2.3σ. We speculate the possible radiation mechanisms responsible for the correlation.

79 ASTRONOMY AND ASTROPHYSICS↗

The reflection component from Cygnus X-1 in the soft state measured by NuSTAR and Suzaku

The black hole binary Cygnus X-1 was observed in late 2012 with the Nuclear Spectroscopic Telescope Array (NuSTAR) and Suzaku, providing spectral coverage over the ∼1-300 keV range. The source was in the soft state with a multi-temperature blackbody, power law, and reflection components along with absorption from highly ionized material in the system. The high throughput of NuSTAR allows for a very high quality measurement of the complex iron line region as well as the rest of the reflection component. The iron line is clearly broadened and is well described by a relativistic blurring model, providing an opportunity to constrain the black hole spin. Although the spin constraint depends somewhat on which continuum model is used, we obtain a {sub *} > 0.83 for all models that provide a good description of the spectrum. However, none of our spectral fits give a disk inclination that is consistent with the most recently reported binary values for Cyg X-1. This may indicate that there is a >13° misalignment between the orbital plane and the inner accretion disk (i.e., a warped accretion disk) or that there is missing physics in the spectral models.

79 ASTRONOMY AND ASTROPHYSICS↗

H I free-bound emission of planetary nebulae with large abundance discrepancies: Two-component models versus κ-distributed electrons

The 'abundance discrepancy' problem in the study of planetary nebulae (PNe), viz., the problem concerning systematically higher heavy-element abundances derived from optical recombination lines relative to those from collisionally excited lines, has been under discussion for decades, but no consensus on its solution has yet been reached. In this paper, we investigate the hydrogen free-bound emission near the Balmer jump region of four PNe that are among those with the largest abundance discrepancies, aiming to examine two recently proposed solutions to this problem: two-component models and κ electron energy distributions. We find that the Balmer jump intensities and the spectrum slopes cannot be simultaneously matched by the theoretical calculations based upon single Maxwell-Boltzmann electron-energy distributions, whereas the fitting can be equally improved by introducing κ electron energy distributions or an additional Maxwell-Boltzmann component. We show that although H I free-bound emission alone cannot distinguish between the two scenarios, it can provide important constraints on the electron energy distributions, especially for cold and low-κ plasmas.

79 ASTRONOMY AND ASTROPHYSICS↗

A TWO-COMPONENT JET MODEL FOR THE TIDAL DISRUPTION EVENT SWIFT J164449.3+573451

We analyze both the early- and late-time radio and X-ray data of the tidal disruption event (TDE) Swift J1644+57. The data at early times (≲ 5 days) necessitate separation of the radio and X-ray emission regions, either spatially or in velocity space. This leads us to suggest a two-component jet model, in which the inner jet is initially relativistic with Lorentz factor Γ ≈ 15, while the outer jet is trans-relativistic, with Γ ≲ 1.2. This model enables a self-consistent interpretation of the late-time radio data, both in terms of peak frequency and flux. We solve the dynamics, radiative cooling, and expected radiation from both jet components. We show that while during the first month synchrotron emission from the outer jet dominates the radio emission, at later times, radiation from ambient gas collected by the inner jet dominates. This provides a natural explanation to the observed re-brightening, without the need for late-time inner engine activity. After 100 days, the radio emission peak is in the optically thick regime, leading to a decay of both the flux and peak frequency at later times. Our model's predictions for the evolution of radio emission in jetted TDEs can be tested by future observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Type I planet migration in a magnetized disk. I. Effect of large-scale vertical and azimuthal field components

We study the effects of a large-scale, ordered magnetic field in protoplanetary disks on Type I planet migration using a combination of numerical simulations in 2D and 3D and a linear perturbation analysis. Steady-state models of such disks require the inclusion of magnetic diffusivity. To make progress using ideal MHD, we focus on simplified field configurations, involving purely vertical (B{sub z}) and azimuthal (B{sub φ}) field components and a combination of the two. For each of the models we calculate the locations of the relevant resonances and of the turning points, which delineate the propagation regions of the MHD waves that transport angular momentum from the planet to the disk. We use both numerical and semianalytic methods to evaluate the cumulative back torque acting on the planet, and explore the effect of spatial gradients in the disk’s physical variables on the results. We conclude that, under realistic (3D) circumstances, a large-scale magnetic field can slow down the inward migration that characterizes the underlying unmagnetized disk—by up to a factor of ∼2 when the magnetic pressure approaches the thermal pressure—but it cannot reverse it. A previous inference that a pure-B{sub ϕ} field whose amplitude decreases fast enough with radius leads to outward migration applies only in 2D. In fact, we find that, in 3D, a pure-B{sub ϕ} disk undergoes a rapid transition to turbulence on account of a magnetorotational instability that is triggered by the planet-induced appearance of a weak B{sub z} component.

79 ASTRONOMY AND ASTROPHYSICS↗

Runaway electron-induced plasma facing component damagein tokamaks

This Roadmap article addresses the critical and multifaceted challenge of plasma facing component (PFC) damage caused by runaway electrons (REs) in tokamaks, a phenomenon that poses a significant threat to the viability and longevity of future fusion reactors such as ITER and DEMO. The dramatically increased RE production expected in future high-current tokamaks makes it very difficult to avoid or mitigate REs in such devices when a plasma discharge terminates abnormally. Preventing damage from the intense localised heat loads they can cause requires a holistic approach that considers plasma, REs and PFC damage. Despite decades of progress in understanding the physics of REs and the thermomechanical response of PFCs separately, their complex interplay remains poorly understood. This document aims to initiate a coordinated, interdisciplinary approach to bridge this gap by reviewing experimental evidence, advancing diagnostic capabilities, and improving modelling tools across different scales, dimensionalities, and fidelities. Key topics include RE beam formation and transport, damage mechanisms in both brittle and metallic PFCs, and observed effects in major facilities such as JET, DIII-D, WEST and EAST. The Roadmap emphasises the urgency of predictive, high-fidelity modelling validated against well-diagnosed controlled experiments, particularly in the light of recent changes in ITER’s wall material strategy and the growing importance of private sector fusion initiatives. Each section of the Roadmap article is written to provide a concise overview of one area of this multidisciplinary subject, with an assessment of the status, a look at current and future challenges, and a brief summary. The ultimate goal of this initiative is to guide future mitigation strategies and design resilient components that can withstand the intense localised loads imposed by REs, thus ensuring the safe and sustainable operation of the next generation of fusion power plants.

Ratynskaia, Svetlana [KTH Royal Inst. of Technolog↗

Barkhausen noise as an intrinsic fingerprint for ferromagnetic components

Here in this work, the suitability of magnetic Barkhausen noise as an intrinsic fingerprint of ferromagnetic components is determined. This technique has potential for this application because it is based inherently on the near surface microstructural features of ferromagnetic materials. All materials typically display some variation in their microstructure simply as a result of the manufacturing process (rolling, heat treating, welding, grinding), thus providing the potential that Barkhausen noise measurements between nominally similar components will be unique. In this work, we demonstrate that Barkhausen noise measurements are both repeatable in time for a single sample made from a ferromagnetic material, and unique across a number of instances of nominally similar samples. The results of this work have profound implications in a variety of applications in forensics and physical security. For example, consider the fabrication of the next generation of tamper-evident containers and devices using conventional processes for steel. In addition, since Barkhausen noise is sensitive to changes in microstructures due to grinding and welding, these measurements can be used to detect clandestine repairs and tampering. Finally, because the method inherently results in a time series measurement at each point on a sample, it is expected to have far higher dimensionality than physically similar eddy current measurement. However, the higher dimensionality of Barkhausen measurements suggest that they should be harder to counterfeit than eddy current measurements.

36 MATERIALS SCIENCE↗

Effects of the imaginary inflaton component in supergravity new inflation

When models of new inflation are implemented in supergravity, the inflaton is a complex and not a real scalar field. As a complex scalar field has two independent components, supergravity models of new inflation are naturally two-field models. In this paper, we use the δN formalism to analyse how the two-field behaviour modifies the usual single-field predictions. We find that the model reduces to the single-field limit if the inflaton mass term is sufficiently small. Otherwise, the imaginary inflaton component reduces the amplitude A{sub s} and the spectral index n{sub s} of the scalar curvature perturbations. However, the perturbations remain nearly Gaussian, and the reduced bispectrum f{sub NL} is too small to be observed.

79 ASTRONOMY AND ASTROPHYSICS↗

The effective field theory of multi-component fluids

We study the effective Lagrangian, at leading order in derivatives, that describes the propagation of density and metric fluctuations in a fluid composed by an arbitrary number of interacting components. Our results can be applied to any situation in cosmology where different species have non-gravitational interactions. In time-dependent backgrounds, such as FLRW, the quadratic action can only be diagonalized at fixed time slices and flavour mixing is unavoidable as time flows. In spite of this, the fluid can be interpreted at the level of the linear equations of motion as an ensemble of individual interacting species. We show that interactions lead to anisotropic stresses that depend on the mixing terms in the quadratic action for perturbations. In addition to the standard entrainment among different components, we find a new operator in the effective action that behaves as a cosmological constant when it dominates the dynamics.

79 ASTRONOMY AND ASTROPHYSICS↗

Plasma–surface interaction in the stellarator W7-X: conclusions drawn from operation with graphite plasma-facing components

W7-X completed its plasma operation in hydrogen with island divertor and inertially cooled test divertor unit (TDU) made of graphite. A substantial set of plasma-facing components (PFCs), including in particular marker target elements, were extracted from the W7-X vessel and analysed post-mortem. The analysis provided key information about underlying plasma–surface interactions (PSI) processes, namely erosion, transport, and deposition as well as fuel retention in the graphite components. The net carbon (C) erosion and deposition distribution on the horizontal target (HT) and vertical target (VT) plates were quantified and related to the plasma time in standard divertor configuration with edge transform ι = 5/5, the dominant magnetic configuration of the two operational phases (OP) with TDU. The operation resulted in integrated high net C erosion rate of 2.8 mg s -1 in OP1.2B over 4809 plasma seconds. Boronisations reduced the net erosion on the HT by about a factor 5.4 with respect to OP1.2A owing to the suppression of oxygen (O). In the case of the VT, high peak net C erosion of 11μm at the strike line was measured during OP1.2B which converts to 2.5 nm s -1 or 1.4 mg s -1 when related to the exposed area of the target plate and the operational time in standard divertor configuration. PSI modelling with ERO2.0 and WallDYN-3D is applied in an interpretative manner and reproduces the net C erosion and deposition pattern at the target plates determined by different post-mortem analysis techniques. This includes also the 13 C tracer deposition from the last experiment of OP1.2B with local 13 CH 4 injection through a magnetic island in one half module. The experimental findings are used to predict the C erosion, transport, and deposition in the next campaigns aiming in long-pulse operation up to 1800 s and utilising the actively cooled carbon-fibre composite (CFC) divertor currently being installed. The CFC divertor has the same geometrical design as the TDU and extrapolation depends mainly on the applied plasma boundary. Extrapolation from campaign averaged information obtained in OP1.2B reveals a net erosion of 7.6 g per 1800 s for a typical W7-X attached divertor plasma in hydrogen.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Refine your search to explore more results.