Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “benchmarks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Fluid Stratification Separate Effects Analysis, Testing and Benchmarking

High Temperature Gas Reactors (HTGRs) are positioned to disrupt local and global markets via their unique ability to produce carbon-free process heat, high efficiency power generation, and passively safe operational features. However, significant impediments still exist to delay deployment of this particular technology, including a lack of experimental data, verified code application, and lack of consensus with regards to severe accident progression. In particular, air ingress accidents represent a particular challenge to designers and engineers, as they represent low probability, but highly complex, accident scenarios. Including phenomena such as molecular diffusion, free convection, and complex heat and mass transfer paths, experimental and traceable data is essential to maturing the state of the industry. Therefore, this work presents an experimental investigation of the transition to natural convection in HTGR applications using the Stratified Flow Separate Effects Test Facility, housed at Oregon State University. In particular, this work will present data that challenges the assumption that molecular diffusion is a significant factor in this severe accident in the reference facility of the General Atomic 600 MW th Gas Turbine-Modular Helium Reactor (GT-MHR). Rather, experimentally produced data shows a statistically suggestive retardant effect of cross duct orientation, indicating that ingress mechanics may be fundamentally altered via facility geometry. Experimentally, this is achieved using a simplified cross duct that may be positioned in one of two ways so as to provide either horizontal or vertical access to the lower plenum area. Onset of natural convection (ONC) is measured using an oxygen sensor probe, immersed in the helium working fluid, so as to provide direct indication of air presence in the upper plenum. This document will present the doctoral dissertation produced by this work, along with its analysis, experimental data, observations, and conclusions, in addition to select documents that will highlight critical changes during the development process. Those documents will include the quality assurance plan, all subsequent change requests, and the engineering transfer from Harris Thermal in order to establish the most complete quality record possible.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2017

Development of a RIA Experimental Benchmark for BISON

This milestone report documents FY-17 efforts for the Reactivity Initiated Accident (RIA) Challenge Problem to demonstrate PWR RIA Fuel Performance capability. The challenge problem implementation plan identified a series of experimental comparisons to validate RIA capability in BISON. The specific cases chosen for FY-17 are CABRI REP Na-2, 3, 5, and 10. Work was also performed on the Nuclear Safety Research Reactor (NSRR) FK-1, 2, 3, 4, 5, 6, 7, 8, and 9 cases.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2018

Single crystal metal photocathodes: Benchmarking performance against Ab initio theory

The results generated by this short-term research project have contributed significantly to our overall understanding and practical implementation of metal photocathodes. First, the research work has verified the direct connection between the energy-momentum dispersion of the emitting bulk band states and the mean transverse energy and quantum efficiency of the electrons emitted from solid-state photocathodes. Second, and more importantly, the work has shown that the density of the recipient vacuum states must be included in any description of the emission properties of photocathodes. Third, amongst the primary crystal faces of Cu, only Cu(100) is found to be a good single-crystal photocathode material in the 260-270nm wavelength range, which includes the fourth harmonic of Nd:YAG lasers. Finally, measurements on Mg(0001) indicate that UV transparent oxide surface layers can affect the mean transverse energy of photo-emitted electrons.

43 PARTICLE ACCELERATORS↗
DOE OSTI2017

Deploy production sliding mesh capability with linear solver benchmarking (ECP Milestone Report, Ver. 1.0)

Wind applications require the ability to simulate rotating blades. To support this use-case, a novel design-order sliding mesh algorithm has been developed and deployed. The hybrid method combines the control volume finite element methodology (CVFEM) with concepts found within a discontinuous Galerkin (DG) finite element method (FEM) to manage a sliding mesh. The method has been demonstrated to be design-order for the tested polynomial basis (P=1 and P=2) and has been deployed to provide production simulation capability for a Vestas V27 (225 kW) wind turbine. Other stationary and canonical rotating flow simulations are also presented. As the majority of wind-energy applications are driving extensive usage of hybrid meshes, a foundational study that outlines near-wall numerical behavior for a variety of element topologies is presented. Results indicate that the proposed nonlinear stabilization operator (NSO) is an effective stabilization methodology to control Gibbs phenomena at large cell Peclet numbers. The study also provides practical mesh resolution guidelines for future analysis efforts. Application-driven performance and algorithmic improvements have been carried out to increase robustness of the scheme on hybrid production wind energy meshes. Specifically, the Kokkos-based Nalu Kernel construct outlined in the FY17/Q4 ExaWind milestone has been transitioned to the hybrid mesh regime. This code base is exercised within a full V27 production run. Simulation timings for parallel search and custom ghosting are presented. As the low-Mach application space requires implicit matrix solves, the cost of matrix reinitialization has been evaluated on a variety of production meshes. Results indicate that at low element counts, i.e., fewer than 100 million elements, matrix graph initialization and preconditioner setup times are small. However, as mesh sizes increase, e.g., 500 million elements, simulation time associated with "setup-up" costs can increase to nearly 50% of overall simulation time when using the full Tpetra solver stack and nearly 35% when using a mixed Tpetra- Hypre-based solver stack. The report also highlights the project achievement of surpassing the 1 billion element mesh scale for a production V27 hybrid mesh. A detailed timing breakdown is presented that again suggests work to be done in the setup events associated with the linear system. In order to mitigate these initialization costs, several application paths have been explored, all of which are designed to reduce the frequency of matrix reinitialization. Methods such as removing Jacobian entries on the dynamic matrix columns (in concert with increased inner equation iterations), and lagging of Jacobian entries have reduced setup times at the cost of numerical stability. Artificially increasing, or bloating, the matrix stencil to ensure that full Jacobians are included is developed with results suggesting that this methodology is useful in decreasing reinitialization events without loss of matrix contributions. With the above foundational advances in computational capability, the project is well positioned to begin scientific inquiry on a variety of wind-farm physics such as turbine/turbine wake interactions.

Domino, Stefan P.↗
DOE OSTI2019

Benchmarking Current and Emerging Approaches to Infrasound Signal Classification

Low frequency sound ≤ 20 Hz, known as infrasound, is generated by a variety of natural and anthropogenic sources. Following an event, infrasonic waves travel through a dynamic atmosphere that can change on the order of minutes. This makes infrasound event classification a difficult problem as waveforms from the same source type can look drastically different. Event classification usually requires ground truth information from seismic or other methods. This is time consuming, inefficient, and does not allow for a classification if the event locates somewhere other than a known source, the location accuracy is poor, or ground truth from seismic data is lacking. Here we compare the performance of the state of the art for infrasound event classification, support vector machine (SVM), to the performance of a convolutional neural network (CNN), a method that has been proven in tangential fields such as seismology. For a 1-class catalog consisting of only volcanic activity and earthquake events, the 4-fold average SVM classification accuracy is 75%, while it is 74% when using a CNN. Classification accuracies from the 4-class catalog consisting of the most common infrasound events detected at the global scale are 55% and 56% for the SVM and CNN architectures, respectively. These results demonstrate that using a CNN does not increase performance for infrasound event classification. This suggests that SVM should be the preferred classification method as it is a simpler and more trustworthy architecture and can be tied to the physical properties of the waveforms. The SVM and CNN algorithms described in this paper are not yet generalizable to other infrasound event catalogs. We anticipate this study to be a starting point for the development of large and comprehensive, systematically labeled, infrasound event catalogs as such catalogs will be necessary to provide an increase in the value of deep learning on event classification.

47 OTHER INSTRUMENTATION↗
DOE OSTI2019

Benchmarking 3D-MHD simulations of electrothermal instability growth by studying z-pinches with engineered defects

The electrothermal instability (ETI) is driven by Joule heating and arises from the dependence of resistivity on temperature. ETI may drive azimuthally correlated surface density variations which seed magneto Rayleigh-Taylor (MRT) instability growth. Liner implosion studies suggest that dielectric surface coatings reduce the amplitude of ETI driven perturbations. Furthermore, previous fundamental physics studies suggest that non-metallic inclusions within the metal can seed ETI growth. In this project, we aimed to (1) determine how dielectric coatings modify ETI growth by varying the coating thickness and the surface structure of the underlying metal, and (2) study overheating from engineered defects—designed lattices of micron-scale pits. Engineered pits divert current density and drive local overheating in a way that can be compared with 3DMHD simulations. All experiments were executed on the Sandia Mykonos Facility. Facility and diagnostic investments enabled high quality data to be gathered in support of project deliverables.

42 ENGINEERING↗
DOE OSTI2019

Software Requirement Document: Benchmarking Algorithms for RadioNuclide Identification (BARNI)

The Department of Energy (DOE) Office of Nuclear Smuggling Detection and Deterrence (NSDD) seeks to improve the performance of RadioIsotope Identification Devices (RIIDs). RIIDs enable users to identifying threat nuclides in applications such as secondary search, facility inspection, and emergency response. As part of this effort NSDD has developed Replicative Assessment of Spectroscopic Equipment (RASE), an open-source tool which generates synthetic spectra and analyzes them with vendor’s radionuclide identification software in order to evaluate performance.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2020

An Analytic Benchmark for the Solution to the Isotopic Fission Spectrum Mixture Problem

In neutron transport calculations, it is common to specify material compositions in terms of constituent isotopes. Material compositions may be described by isotope number densities and associated microscopic cross sections. For general reaction cross sections, the macroscopic cross sections of a composition are simply the summation of the sum of the products of isotope number densities and microscopic cross sections. A notable exception is the mixture of the neutron fission spectrum in fissile material. To demonstrate proper and improper mixture of the neutron fission spectrum, a zero-dimensional test problem is developed. Using the test problem, it is demonstrated that the improper mixing of the fission spectrum results in an eigenvalue error of approximately 65 pcm. Though this may seem small, any error in such a simple calculation is unacceptable. In similar infinite-homogeneous test problems, eigenvalue errors of more than 300 pcm have been observed. It is also shown that the error due to fission spectrum mixing can be exaggerated for computer program verification purposes. It is concluded that the proper mixture of the neutron fission spectrum is essential for accurate neutron transport simulations. The effect of improper neutron fission spectrum mixture is demonstrated and quantified and this test problem may be used for verification purposes in the future.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

ATF Benchmark Problems

The events at Fukushima Daiichi Nuclear Power Plant on March 2011 propelled the research and development of accident-tolerant fuel (ATF) for use in nuclear power plants. After these events, the United States Senate Appropriations Committee requested a report from the United States Department of Energy (DOE) regarding DOE’s plan for developing ATF. In DOE’s development plan, a 10-year effort beginning in 2012 was outlined from Phase 1 feasibility studies through Phase 3 commercialization with a lead test assembly (LTA) or a lead fuel rod (LFR) to be ready for insertion into a reactor by 2022. In fiscal year 2018, the US Nuclear Regulatory Commission (NRC) expressed an interest in using the DOE Office of Nuclear Energy (NE) advanced modeling and simulation (M&S) tools to evaluate advanced fuel concepts such as ATF. This interest evolved into a formal cooperation between DOE and NRC to ensure that an effective M&S capability is available for NRC analyses of ATF concepts. Over the last 10 years, the DOE-funded Energy Innovation Hub, also known as the Consortium for Advanced Simulation of Light Water Reactors (CASL), has developed, applied and deployed advanced M&S capabilities to enhance the operational performance, efficiency, and safety of light water reactors (LWRs). Due to the aging US nuclear fleet, CASL was initiated to improve the efficiency of nuclear power production, lower costs by enhancing the understanding of fuel performance and residence time in the nuclear reactor, enhance safety by studying new fuels that can endure severe conditions, and extend the life of existing reactors by predicting the lifetimes of key structural components

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2019

Modeling the IFR-1 Experiment: A BISON Metallic Fuel Benchmark

As the 1970s nuclear reactor fleet slowly begins the decommission process, the US Department of Energy Office of Nuclear Energy (DOE-NE) aims to stimulate and support the construction and implementation of new nuclear reactors across the country in hopes of continuing the generation of clean, reliable, resilient energy. As a result, various efforts have been introduced to accelerate this process, including the Versatile Test Reactor project (VTR) and the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

IER-519 CED-2: Final Design for Thermal/Epithermal eXperiments (TEX) with Absorbers to Provide Validation Benchmarks for Hanford Tank Farms

The Hanford tank farms contain 56 million gallons of waste across 177 tanks. The primary criticality safety concern for the waste is the plutonium inventory in waste solids – approximately 670 kg in total. Criticality safety analysis credits the absorption and dilution properties of the large quantities of other elements (aluminum, chromium, iron, manganese, nickel, silicon, sodium, and zirconium) present in the waste. Of these, iron and manganese are by far the most significant neutron absorbers, particularly for the waste compositions of highest criticality safety concern. The criticality safety analyses at the Hanford Waste Treatment and Vitrification Plant (WTP) and the Savannah River tank farms also credit iron and manganese as the primary neutron absorbers to demonstrate subcriticality.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Capital Costs for Dual-Use Photovoltaic Installations: 2020 Benchmark for Ground-Mounted PV Systems with Pollinator-Friendly Vegetation, Grazing, and Crops

This report analyzes the installed system cost of various multi-land use PV system configurations. We used PV system bottom-up cost model accounting for all system and project-development costs incurred during the installation to model the costs for conventional PV systems, PV systems co-located with sheep grazing, PV systems co-located with pollinator friendly fields and PV systems co-located with crops. We also conducted extensive sensitivity analysis around different PV system design parameters given the nascent stage of this industry.

14 SOLAR ENERGY↗

Refine your search to explore more results.