Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WALLS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Reduction of acoustic disturbances in the test section of supersonic wind tunnels by laminarizing their nozzle and test section wall boundary layers by means of suction

The feasibility of quiet, suction laminarized, high Reynolds number (Re) supersonic wind tunnel nozzles was studied. According to nozzle wall boundary layer development and stability studies, relatively weak area suction can prevent amplified nozzle wall TS (Tollmien-Schlichting) boundary layer oscillations. Stronger suction is needed in and shortly upstream of the supersonic concave curvature nozzle area to avoid transition due to amplified TG (Taylor-Goertler) vortices. To control TG instability, moderately rapid and slow expansion nozzles require smaller total suction rates than rapid expansion nozzles, at the cost of larger nozzle length Re and increased TS disturbances. Test section mean flow irregularities can be minimized with suction through longitudinal or highly swept slots (swept behind local Mach cone) as well as finely perforated surfaces. Longitudinal slot suction is optimized when the suction-induced crossflow velocity increases linearly with surface distance from the slot attachment line toward the slot (through suitable slot geometry). Suction in supersonic blowdown tunnels may be operated by one or several individual vacuum spheres.

Pfenninger, W.↗
NASA NTRS1974

Slip conditions with wall catalysis and radiation for multicomponent, nonequilibrium gas flow

The slip conditions for a multicomponent mixture with diffusion, wall-catalyzed atom recombination and thermal radiation are derived, and simplified expressions for engineering applications are presented. The gas mixture may be in chemical nonequilibrium with finite-rate catalytic recombination occurring on the wall. These boundary conditions, which are used for rarefied flow regime flow field calculations, are shown to be necessary for accurate predictions of skin friction and heat transfer coefficients in the rarefied portion of the space shuttle trajectory.

Hendricks, W. L.↗
NASA NTRS1975

Effect of wall suction on performance of a short annular diffuser at inlet Mach numbers up to 0.5

A short annular diffuser equipped with wall bleed (suction)capability was evaluated at inlet Mach numbers of 0.186 to 0.5. The diffuser had an area ratio of 4.0 and a length-to-inlet height ratio of 1.6. Test results show that the exit velocity profiles, typical of annular jet flow without suction, could be considerably flattened by application of wall suction. This improved performance was also reflected in diffuser effectiveness (static-pressure recovery) and total-pressure loss results. At the inlet Mach number of 0.5 diffuser static-pressure recovery is equal to or better than at lower inlet Mach numbers for comparable suction rates.

Juhasz, A. J.↗
NASA NTRS1975

Radiation exchange for a system with partially transmitting wall

An approach is presented for applying the net radiation method developed by Siegel and Howell (1972) and Sparrow and Cess (1966) to systems involving opaque and partially transmitting walls. The results obtained from the basic equations for various values of plate emissivities and temperatures are presented in graphs. Attention is given to the window temperature relative to the temperature of the hot wall and the heat transferred relative to that transferred without the window.

Hussain, N. A.↗
NASA NTRS1975

Experimental verification of turbulent skin friction reduction with compliant walls

Preliminary compliant wall skin friction test results obtained in a low-turbulence pressure tunnel are reported. Compliant surface skins consisted of 0.0025 cm thick mylar, stretched under tension and area-bonded or longitudinally strip-bonded with silicone rubber adhesive to polyurethane foam. Mean velocity and fluctuating survey data were obtained with a single slanted hot wire. Mean velocity profiles for the area-bonded mylar surface skins indicated up to a 20% reduction in boundary-layer thickness (and lower momentum thickness) over rigid surfaces. This reduction in boundary-layer thickness indicates that a drag reduction occurred. In addition, a 16% reduction in wall shear was evident for the mylar/compressor foam compliant surface.

Weinstein, L. M.↗
NASA NTRS1975

Size distribution of fragment debris produced by simulated meteoroid impact of spacecraft wall

A laboratory experimental program was conducted to determine the amount of fragment debris produced and its size distribution when simulated spacecraft walls are penetrated by hypervelocity projectiles. Two tests were made in which a spacecraft wall was struck with a small steel and an aluminum projectile, respectively. Results show that most of the fragment debris were irregularly shaped flat plates. The fragment data follow a cumulative number distribution law of the form N = am(exp b) where m is fragment mass and a and b are constants. Orbital lifetimes of most of the fragments were very short, being on the order of a few days.

T Dale Bess↗
NASA NTRS1975

Turbulent wall jet in a coflowing stream

A theoretical investigation was undertaken to develop a relatively simple model of a two-dimensional, turbulent wall jet in a coflowing stream. The incompressible jet flow was modeled by using an integral method which includes turbulent shear stress, entrainment, and heat transfer. The method solves the conservation equations for the average jet flow properties and uses the velocity profile suggested by Escudier and Nicoll to obtain detailed characteristics of the jet on a flat plate. The analytical results compare favorably with experimental data for a range of injection velocities, which demonstrates the usefulness of the theory for estimating jet growth, velocity decay, and wall skin friction. The theory, which was applied to a Coanda jet on a circular cylinder, provided estimates of suction pressures aft of the jet exit that were in close agreement with experimental values.

Campbell, J. F.↗
NASA NTRS1975

Wall-wake velocity profile for compressible non-adiabatic flows

A form of the wall-wake profile, which is applicable to flows with heat transfer, and for which a variation in y = O at y = delta, was suggested. The modified profile, which takes into account the effect of turbulent Prandtl number, was found to provide a good representation of experimental data for a wide range numbers and heat transfer. The Cf values which are determined by a least squares fit of the profile to the data agree well with values which were measured by the floating element technique. In addition, the values of delta determined by the fit correspond more closely to the outer edge of the viscous flow region than those obtained with earlier versions of the wall-wake profile.

Sun, C. C.↗
NASA NTRS1976

Blade end wall flows in compressors

A brief summary of previous work carried out on end wall flow phenomena is presented with major emphasis on annulus wall boundary layer.

Sitaram, N.↗
NASA NTRS1976

Wall-wake velocity profile for compressible nonadiabatic flows

The paper suggests a new form of the wall-wake profile which is applicable to flows with heat transfer, and for which the velocity gradient at the boundary-layer edge is zero. The modified profile - which takes into account the effect of turbulent Prandtl number - is found to provide a good representation of experimental data for a wide range of Mach numbers and heat transfer. The skin friction coefficient values determined by a least squares fit of the profile to the data are in good agreement with values measured by the floating element technique. The values of boundary-layer thickness determined by the fit correspond more closely to the outer edge of the viscous flow region than those obtained with earlier versions of the wall-wake profile.

Sun, C.-C.↗
NASA NTRS1976

Re-examination of compliant wall experiments in air with water substrates

A possible alternative explanation is proposed for compliant wall drag reductions measured in previous investigations. Standing waves were observed to form on the surfaces of compliant wall models in air with water substrates as the freestream velocity was increased from 15 to 30 m/s. These waves resembled sine waves with half of the wave protruding over the upstream portion of the model and the other half being recessed over the downstream end of the model. These data coupled with results of recent drag reduction experiments suggest that standing waves could have caused a shift in the model center of gravity creating a bending moment that was interpreted as a reduction in the skin friction drag.

Hefner, J. N.↗
NASA NTRS1975

Clinical applications of a quantitative analysis of regional lift ventricular wall motion

Observations were summarized which may have clinical application. These were obtained from a quantitative analysis of wall motion that was used to detect both hypokinesis and tardokinesis in left ventricular cineangiograms. The method was based on statistical comparisons with normal values for regional wall motion derived from the cineangiograms of patients who were found not to have heart disease.

Leighton, R. F.↗
NASA NTRS1975

Dynamic radionuclide determination of regional left ventricular wall motion using a new digital imaging device

In 47 men with arteriographically defined coronary artery disease comparative studies of left ventricular ejection fraction and segmental wall motion were made with radionuclide data obtained from the image intensifier camera computer system and with contrast cineventriculography. The radionuclide data was digitized and the images corresponding to left ventricular end-diastole and end-systole were identified from the left ventricular time-activity curve. The left ventricular end-diastolic and end-systolic images were subtracted to form a silhouette difference image which described wall motion of the anterior and inferior left ventricular segments. The image intensifier camera allows manipulation of dynamically acquired radionuclide data because of the high count rate and consequently improved resolution of the left ventricular image.

Steele, P.↗
NASA NTRS1977

Analytical and numerical investigation of structural response of compliant wall materials

Surface motion of compliant walls in drag reduction experiments was analyzed. The spectrum of surface motion indicates that membranes over deep cavities respond at low frequencies and large wavelengths. The membrane over a deep cavity is therefore found not to yield the desired reponse predicted by the postulated mechanism. The membrane over a thin air gap is found to act as a wavelength chopper, and analysis of the nonlinear response of the compliant surface indicates its possible suitability for compliant wall experiments. Periodic structures are found to lock in the desired wavelengths of motion. Laminated structures are found to be very ineffective as compliant models, except when there is no bonding between the membrane and the backing. Computer programs developed for these analyses are documented.

Goglia, G. L.↗
NASA NTRS1977

Direct measurements of wall shear stress by buried wire gages in a shock-wave boundary-layer interaction region

Detailed measurements of wall shear stress (skin friction) were made with specially developed buried wire gages in the interaction regions of a Mach 2.9 turbulent boundary layer with externally generated shocks. Separation and reattachment points inferred by these measurements support the findings of earlier experiments which used a surface oil flow technique and pitot profile measurements. The measurements further indicate that the boundary layer tends to attain significantly higher skin-friction values downstream of the interaction region as compared to upstream. Comparisons between measured wall shear stress and published results of some theoretical calculation schemes show that the general, but not detailed, behavior is predicted well by such schemes.

Murthy, V. S.↗
NASA NTRS1976

Stress-intensity factors for a thick-walled cylinder containing an annular imbedded or external or internal surface crack

The elastostatic axisymmetric problem for a long thick-walled cylinder containing a ring-shaped internal or edge crack is considered. Using the standard transform technique the problem is formulated in terms of an integral equation which has a simple Cauchy kernel for the internal crack and a generalized Cauchy kernel for the edge crack as the dominant part. As examples the uniform axial load and the steady-state thermal stress problems have been solved and the related stress intensity factors have been calculated. Among other findings the results show that in the cylinder under uniform axial stress containing an internal crack the stress intensity factor at the inner tip is always greater than that at the outer tip for equal net ligament thicknesses and in the cylinder with an edge crack which is under a state of thermal stress the stress intensity factor is a decreasing function of the crack depth, tending to zero as the crack depth approaches the wall thickness.

Erdol, R.↗
NASA NTRS1978

Interaction between step fuel injectors on opposite walls in a supersonic combustor model

Results are presented from an experimental investigation of perpendicular, hydrogen fuel injection and combustion from opposing walls in a scramjet combustor model using a longitudinally staged laterally inline step-injection configuration. The model represents a portion of the flow in the Langley integrated modular scramjet engine combustor operating at a flight Mach number of 7. When operating at a ratio of jet pressure to free-stream dynamic pressure of 3, the injectors produce a bulk equivalence ratio of unity. This investigation represents part of a continuing study of the modular engine fuel injectors and is specifically designed to eliminate the adverse lateral pressure gradient observed at the injector location in a previous test. Flow survey contours at three axial locations, ranging from one-third of the engine combustor length to the total engine combustor length, are used to determine mixing efficiency and fuel distribution. Wall static pressures are analyzed by using one-dimensional theory to determine the combustion efficiency. Results show a significant improvement over previous injector designs tested in this duct geometry.

Mcclinton, C. R.↗
NASA NTRS1978

Analytical and numerical investigation of structural response of compliant wall materials, part 1

Surface motion of compliant walls in drag reduction experiments was analyzed. Critical comparison was made between the dynamic motion of the structure and the postulated mechanism of drag reduction. The spectrum of surface motion indicated that membranes over deep cavities respond at low frequencies and large wavelengths. The membrane over a deep cavity is therefore found not to yield the desired response predicted by the postulated mechanism. The membrane over a thin air gap is found to act as a wavelength chopper, and analysis of the nonlinear response of that compliant surface indicated its possible suitability for compliant wall experiments. Periodic structures are found to lock in the desired wavelengths of motion, and it was shown that at least in Kramer's initial experiments they produced high frequency surface motions. Laminated structures are found to be very ineffective as compliant models, except when there is no bonding between the membrane and the backing. Computer programs developed for these analyses are documented.

Balasubramanian, R.↗

Refine your search to explore more results.