Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Thermal diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Investigation of W-SiC compositionally graded films as a divertor material

W-SiC composite material is a promising plasma-facing material candidate alternative to pure W due to the low neutron activation, low impurity radiation, and low tritium diffusivity of SiC while leveraging the high erosion resistance of the W armor. Additionally, W and SiC have high thermomechanical compatibility given their similar thermal expansion rates. The present study addresses the synthesis and performance of compositionally graded W-SiC films fabricated by pulsed-DC magnetron sputtering. Compositional gradients were characterized using transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS), and crystallographic information was obtained using electron diffraction and X-ray diffraction (XRD). Samples were exposed to L-mode deuterium plasma discharges in the DIII-D tokamak using the Divertor Material Evaluation System (DiMES). Post-mortem characterizations were performed using scanning electron microscopy (SEM) and XRD. Electron diffraction and XRD showed that the compositionally graded W-SiC films were composed of polycrystalline W and amorphous SiC with amorphous W+SiC interlayers. No macroscopic delamination or microstructural changes were observed under mild exposure conditions. Here, this study serves as a preliminary examination of W-SiC compositionally graded composites as a potential candidate divertor material in future tokamak devices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Predicting thermophysical properties of molten salts in the MgCl 2 -NaCl-KCl-LiCl system with a shell-model potential

Ternary eutectic salts composed of MgCl 2 , NaCl, and KCl, referred to as MNK salts, have recently emerged as promising candidates as high-temperature heat transfer fluids and thermal energy storage media. Here we performed classical molecular dynamics (MD) simulations to predict the densities, specific heat capacities, viscosities, and ionic self-diffusivities for MNK salts over a wide temperature range. The impact of LiCl additive on their thermophysical properties was also investigated. To capture the electronic polarization of Cl anions by neighboring cations, we developed a novel shell-model potential using the force-matching method and a dataset of ab initio calculated interatomic forces. Our extensive MD simulations predict structure and properties for pure salts and binary/ternary salt mixtures in the MgCl 2 -NaCl-KCl-LiCl system in overall good agreement with available experimental and theoretical data, which corroborates the accuracy and reliability of our developed potential.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Single-Layer Dititanium Oxide Ti 2 O MOene: Multifunctional Promises for Electride, Anode Materials, and Superconductor

Using the first-principles calculations, we report the existence of the single-layer (SL) dititanium oxide Ti 2 O (labeled as MOene) that constructs a novel family of MXene based on transition-metal oxides. This MOene material strongly contrasts the conventional ones consisting of transition-metal carbides and/or nitrides. SL Ti 2 O has high thermal and dynamical stabilities because of the strong Ti–O ionic bonding interactions. Moreover, this material is an intrinsic electride and exhibits extremely low diffusion barriers of ~12.0 and 6.3 meV for Li and Na diffusion, respectively. When applied as anode materials in lithium-ion batteries and sodium-ion batteries, it possesses a high energy storage capacity (960.23 mAhg –1 ), surpassing the traditional MXenes-based anodes. The superb electrochemical performance stems from the existing anionic electron on Ti 2 O surface. Astonishingly, SL Ti 2 O is also determined to be a superconductor with a superconducting transition temperature (T c ) of ~9.8 K, which originates from the soft-mode of the first acoustic phonon branch and enhanced electron–phonon coupling in the low-frequency region. Furthermore, this soft-mode behaves much softer upon applying a compressive strain of 2%, leading to a higher T c of 11.9 K. Furthermore, our finding broadens the family of MXenes and could facilitate more experimental efforts toward future nanodevices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Early-time γ -ray constraints on cosmic-ray acceleration in the core-collapse SN 2023ixf with the Fermi Large Area Telescope

Context. While supernova remnants (SNRs) have been considered the most relevant Galactic cosmic ray (CR) accelerators for decades, core-collapse supernovae (CCSNe) could accelerate particles during the earliest stages of their evolution and hence contribute to the CR energy budget in the Galaxy. Some SNRs have indeed been associated with TeV γ -rays, yet proton acceleration efficiency during the early stages of an SN expansion remains mostly unconstrained. Aims. The multi-wavelength observation of SN 2023ixf, a Type II supernova (SN) in the nearby galaxy M 101 (at a distance of 6.85 Mpc), opens the possibility to constrain CR acceleration within a few days after the collapse of the red super-giant stellar progenitor. With this work, we intend to provide a phenomenological, quasi-model-independent constraint on the CR acceleration efficiency during this event at photon energies above 100 MeV. Methods. We performed a maximum-likelihood analysis of γ -ray data from the Fermi Large Area Telescope up to one month after the SN explosion. We searched for high-energy, non-thermal emission from its expanding shock, and estimated the underlying hadronic CR energy reservoir assuming a power-law proton distribution consistent with standard diffusive shock acceleration. Results. We do not find significant γ -ray emission from SN 2023ixf. Nonetheless, our non-detection provides the first limit on the energy transferred to the population of hadronic CRs during the very early expansion of a CCSN. Conclusions. Under reasonable assumptions, our limits would imply a maximum efficiency on the CR acceleration of as low as 1%, which is inconsistent with the common estimate of 10% in generic SNe. However, this result is highly dependent on the assumed geometry of the circumstellar medium, and could be relaxed back to 10% by challenging spherical symmetry. Consequently, a more sophisticated, inhomogeneous characterisation of the shock and the progenitor’s environment is required before establishing whether or not Type II SNe are indeed efficient CR accelerators at early times.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Materials and technological processes for High-Gradient accelerating structures: new results from mechanical tests of an innovative braze-free cavity.

Pure oxygen-free high-conductivity copper is a widely used material for manufacturing accelerating cavities working at room temperature. Several studies attempted to explain limitations associated with the maximum allowed field gradients and the behaviour of vacuum RF breakdown in copper accelerating structures through generation and movement of dislocations under stresses associated with RF electric and magnetic fields. Pure copper and also copper alloys undergo mechanical and thermal treatments to be hardened and strengthened during manufacturing, although their mechanical properties significantly change after heating above 590°C. High temperature brazing and diffusion bonding are assembly methods widely used to manufacture ultra-high vacuum accelerating devices. However, these processes, occurring at about 800–1000°C, significantly affect the mechanical properties of copper and copper alloys. We introduce here a novel Tungsten Inert Gas welding procedure, which is fast and keeps the high-gradient surfaces of the cavity and other components well below the copper annealing temperature. This process may be successfully used to manufacture copper-based accelerating components. This technology further preserves the hardness and cleanliness of copper in order to achieve the maximum accelerating gradient.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Two dimensional topology optimization of heat exchangers with the volume fraction method

We perform a comparison study of two topology optimizations methods applied to the design of a two fluids heat exchanger modeled with a coupled thermal-flow problem. The flow follows an isothermal and incompressible Stokes-Brinkman equation and the heat transfer is governed by a convection-diffusion equation without internal generation and high Peclet number. To keep the two fluid phases separated, we solve two Stokes-Brinkman equations, where the Brinkman term models the other phase as a solid. These two velocity fields are then fed to the heat transfer equation. Our goal is to maximize the enthalpy at the cold outlet while constraining the pressure drop. We first solve the design modeling the solid and fluid phases with a volume fraction variable. A SIMP-like penalization in the Brinkman term drives the optimization to a discrete design. The cost and constraint function derivatives are calculated with the library pyadjoint and the optimization is performed by IPOPT. We present optimized designs in two dimensions and discuss the influence of the parameters.

Beck, VictorA.↗
NASA NTRS1972

Diffusion freezeout in gas-loaded heat pipes.

Experimental diffusion freezeout rates in a gas loaded heat pipe are presented and compared with predictions of an analysis and computer program published earlier. The experimental approach was to pivot a heat pipe on knife edges and use an analytical mass balance to measure the rate of mass migration within the pipe. Diffusion freezeout rates in a water heat pipe were measured as a function of the condenser sink temperature and the condenser-to-sink thermal conductance. Measured rates varied between 19 and 270 mg/hr and yielded 64 to 99 percent agreement with predicted values. These results indicated that the analysis and computer program for predicting the behavior of gas loaded heat pipes are useful tools for designing such systems.

Marcus, B. D.↗
NASA NTRS1974

Parametric thermodynamic analysis of closed-cycle gas-laser operation in space

Cycle efficiency and radiator area required were calculated for thermally and electrically pumped lasers operating in closed cycles with a compressor and the required heat exchangers. A thermally pumped laser included within a Brayton cycle was also analyzed. Performance of all components, including the laser, was parametrically varied. For the thermally pumped laser the cycle efficiencies range below 10 percent and are very sensitive to the high-pressure losses associated with the supersonic diffuser required at the laser cavity exit. The efficiencies predicted for the electrically pumped laser cycles range slightly higher, but radiator area also tends to be larger.

Burns, R. K.↗
NASA NTRS1975

Design of a heat pipe governed thermal control system for the Solar Electric Propulsion Stage /SEPS/

A 2200-w capacity spacecraft heat rejection system designed for the SEPS and utilizing heat pipe radiator panels has been investigated. The total thermal control system consists of two radiator panels connected to the heat source by variable conductance heat pipes (VCHP's). The system was designed to operate in the 223 to 333 temperature range. The radiators have an emittance of 0.88 at their operational temperature and a fin efficiency of approximately 80 percent. The radiators are thermally isolated from the SEPS and environment by multilayer insulation and thermal shields. Butane was selected as the working fluid for the VCHP because of its low freezing point (135), which is necessary to prevent diffusion freezeout of the liquid during the cold outbond missions. Helium was selected for the control gas. This paper describes the VCHP system, discusses the system design parameters and presents the results of the analyses.

Ruttner, L. E.↗
NASA NTRS1979

Spatial distribution and broad-band spectral characteristics of the diffuse X-ray background, 0.1 - 1.0 keV

Preliminary maps covering more than 85 percent of the sky are presented for three energy bands: the B band, the C band, and the M band. The study was undertaken to find evidence that most of the diffuse X-ray background at energies less than 1 keV is local to the galaxy and that it is most probably due to thermal radiation from a low density plasma which fills a substantial fraction of interstellar space. A preliminary analysis of the data is provided including a report that most of the B and C band flux has a common origin, probably in a 10 to the 6th power K region surrounding the Sun, and that most of the M band flux does not originate from the same material.

Mccammon, D.↗
NASA NTRS1985

Impurities in silicon solar cells

Metallic impurities, both singly and in combinations, affect the performance of silicon solar cells. Czochralski silicon web crystals were grown with controlled additions of secondary impurities. The primary electrical dopants were boron and phosphorus. The silicon test ingots were grown under controlled and carefully monitored conditions from high-purity charge and dopant material to minimize unintentional contamination. Following growth, each crystal was characterized by chemical, microstructural, electrical, and solar cell tests to provide a detailed and internally consistent description of the relationships between silicon impurity concentration and solar cell performance. Deep-level spectroscopy measurements were used to measure impurity concentrations at levels below the detectability of other techniques and to study thermally-induced changes in impurity activity. For the majority of contaminants, impurity-induced performance loss is due to a reduction of the base diffusion length. From these observations, a semi-empirical model which predicts cell performance as a function of metal impurity concentration was formulated. The model was then used successfully to predict the behavior of solar cells bearing as many as 11 different impurities.

Hopkins, R. H.↗
NASA NTRS1985

Teflon, Kapton surface and bulk effects

Two samples of 2 mil aluminized/Kapton thermal blanket and two samples of Teflon were received for evaluation. Their location on the solar maximum is given. The Kapton top layer of the thermal blanket had been exposed to the LEO atomic oxygen environment and shows the surface degradation due to atomic oxygen attack resulting in a diffuse character over most of the surface. The backside Kapton layer which was unexposed appeared to the eye to be in virgin condition. Another sample exhibited similar properties, but was, in large part, covered with Kapton adhesive tape and it was not possible to obtain usable specimens for analysis. One of the Teflon samples which was exposed shows signs of heavy degradation including attack on the Ag/Inconel backside by ultraviolet and atomic oxygen. The other Teflon sample which was unexposed was only slightly fogged on the Teflon side and the Ag/Inconel appeared untouched. These samples were subjected to several chemical and physical analyses, the results of which are discussed.

J C Robinson↗
NASA NTRS1988

Applications of an exponential finite difference technique

An exponential finite difference scheme first presented by Bhattacharya for one dimensional unsteady heat conduction problems in Cartesian coordinates was extended. The finite difference algorithm developed was used to solve the unsteady diffusion equation in one dimensional cylindrical coordinates and was applied to two and three dimensional conduction problems in Cartesian coordinates. Heat conduction involving variable thermal conductivity was also investigated. The method was used to solve nonlinear partial differential equations in one and two dimensional Cartesian coordinates. Predicted results are compared to exact solutions where available or to results obtained by other numerical methods.

Handschuh, Robert F.↗
NASA NTRS1997

Joining of Silicon Carbide-Based Ceramics by Reaction Forming Method

Recently, there has been a surge of interest in the development and testing of silicon-based ceramics and composite components for a number of aerospace and ground based systems. The designs often require fabrication of complex shaped parts which can be quite expensive. One attractive way of achieving this goal is to build up complex shapes by joining together geometrically simple shapes. However, the joints should have good mechanical strength and environmental stability comparable to the bulk materials. These joints should also be able to maintain their structural integrity at high temperatures. In addition, the joining technique should be practical, reliable, and affordable. Thus, joining has been recognized as one of the enabling technologies for the successful utilization of silicon carbide based ceramic components in high temperature applications. Overviews of various joining techniques, i.e., mechanical fastening, adhesive bonding, welding, brazing, and soldering have been provided in recent publications. The majority of the techniques used today are based on the joining of monolithic ceramics with metals either by diffusion bonding, metal brazing, brazing with oxides and oxynitrides, or diffusion welding. These techniques need either very high temperatures for processing or hot pressing (high pressures). The joints produced by these techniques have different thermal expansion coefficients than the ceramic materials, which creates a stress concentration in the joint area. The use temperatures for these joints are around 700 C. Ceramic joint interlayers have been developed as a means of obtaining high temperature joints. These joint interlayers have been produced via pre-ceramic polymers, in-situ displacement reactions, and reaction bonding techniques. Joints produced by the pre-ceramic polymer approach exhibit a large amounts of porosity and poor mechanical properties. On the other hand, hot pressing or high pressures are needed for in-situ displacement reactions and reaction bonding techniques. Due to the equipment required, these techniques are impractical for joining large or complex shaped components.

Singh, M.↗
NASA NTRS1999

Evaluation of Space Power Materials Flown on the Passive Optical Sample Assembly

Evaluating the performance of materials on the exterior of spacecraft is of continuing interest, particularly in anticipation of those applications that will require a long duration in low Earth orbit. The Passive Optical Sample Assembly (POSA) experiment flown on the exterior of Mir as a risk mitigation experiment for the International Space Station was designed to better understand the interaction of materials with the low Earth orbit environment and to better understand the potential contamination threats that may be present in the vicinity of spacecraft. Deterioration in the optical performance of candidate space power materials due to the low Earth orbit environment, the contamination environment, or both, must be evaluated in order to propose measures to mitigate such deterioration. The thirty two samples of space power materials studied here include solar array blanket materials such as polyimide Kapton H and SiO(x) coated polyimide Kapton H, front surface aluminized sapphire, solar dynamic concentrator materials such as silver on spin coated polyimide and aluminum on spin coated polyimide, CV 1144 silicone, and the thermal control paint Z-93-P. The physical and optical properties that were evaluated prior to and after the POSA flight include mass, total, diffuse, and specular reflectance, solar absorptance, and infrared emittance. Additional post flight evaluation included scanning electron microscopy to observe surface features caused by the low Earth orbit environment and the contamination environment, and variable angle spectroscopic ellipsometry to identify contaminant type and thickness. This paper summarizes the results of pre- and post-flight measurements, identifies the mechanisms responsible for optical properties deterioration, and suggests improvements for the durability of materials in future missions.

Jaworske, Donald A.↗
NASA NTRS1998

Contactless Growth of ZnSe Single Crystals by Physical Vapor Transport

ZnSe crystals were grown by self-seeded physical vapor transport (PVT) technique in the horizontal configuration. The source materials were heat treated by H2 reduction to remove the oxide followed by baking under dynamic vacuum to adjust the source composition toward that of congruent sublimation. Contactless growth of ZnSe single crystals have been performed consistently using three different source materials. The crystals grew away from the wall during the later stage of the growth with large (110) facets tend to align parallel to the gravity direction. The Scanning Electron Micrography (SEM) micrographs and the Atomic Force Microscope (AFM) images showed that large (110) terraces and steps dominate the as-grown facets. The measured residual gas pressures in the processed ampoules agree well among various source materials and the major components were CO and H2. No preferred growth direction was found. The one-dimensional diffusion model on the mass flux of a multi-species PVT system was employed to analyze the conditions for contactless growth. The calculated thermal profile for supersaturation is very close to the thermal profile measured inside the empty furnace bore in the region of contactless growth. The effects of convective flows in the vapor phase inside the ampoule on the growth processes are discussed.

Su, Ching-Hua↗
NASA NTRS2003

Data and Modeling of Dendrites Subject to A Step Change in Pressure (TDSE)

There is considerable interest in dendritic solidification because of the influence dendrites have in the determination of microstructure, and thereby in the physical properties of cast metals and alloys. Current theories and models of dendritic growth generally couple diffusion effects in the melt with the physics of the interface. Data and subsequent analysis prior of the tip growth speed and radii of thermal succinonitrile dendrites in the near-convection free, on-orbit, free-fall environment demonstrate that these theories yield predictions that are reasonably in agreement with the results of experiment. However, data and analysis for assessing the interfacial physics component of theory are not sufficiently detailed or definitive. To study fundamental aspects of dendritic interface stability, we are measuring and modeling the kinetics and morphology of dendrites as they evolve from one well-defined steady state at a pre-set supercooling, through a transient stage, to a different well-defined steady state. More specifically, we subject succinonitrile dendrites, growing under steady-state conditions, to a rapid change in pressure. This leads to a rapid change in thermal driving force from the corresponding change in both the equilibrium melting temperature due to the Clapeyron effect, and a change in the far-field temperature due to adiabatic temperature changes in the bulk liquid and solid. Subsequently, we observe transformations from a well-characterized initial state into a new steady-state. Initial data reveal that the dendrite tip velocity changes almost as fast as the pressure charges, while the tip radius changes occur more slowly, taking from 10 60 seconds depending on the size of the step change and the final supercooling. Computer modeling of this process shows both agreements and disagreements with the experimental data. In making these observations and measurements, we are gaining new understandings of interfacial dynamics and state-selection physics.

Koss, Matthew B.↗
DOE OSTI2022

Neutronics and thermal-hydraulics simulation of generic pebble-bed fluoride-salt-cooled high-temperature reactor (gFHR)

The fluoride-salt-cooled high-temperature reactor (FHR) is one type of the advanced reactors and has been attracting great interest from the research institutes and commercial companies in the recent years. However, currently the technology is relatively immature. To facilitate the design and safety analysis of FHRs, Kairos Power published the generic FHR (gFHR) benchmark. In this paper, a hybrid method combining the stochastic code and deterministic code is developed to simulate the gFHR benchmark. Serpent 2 is employed as a few-group cross section generator and the cross sections are applied to the finite difference neutron diffusion code AGREE. A good consistency with the gFHR benchmark is achieved. The agreement between the Serpent 2 results and the AGREE results shows that the hybrid method is applicable to FHRs. The thermal-hydraulics are coupled to neutronics for the steady-state calculations and good agreement between AGREE and SAM is achieved. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Refine your search to explore more results.