Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THRUST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Future thrusts in life sciences experimentation in space

Biomedical research objectives for future Shuttle and/or Space Station missions are discussed, with a focus on experiments exploring the physiological effects of microgravity. Experience up to the present is found to indicate that molecular-level processes are not much affected by the space environment, so that future experiments should concentrate on larger-scale phenomena. Areas considered include cardiovascular, respiratory, skeletal, and muscular physiology; metabolism; neurophysiology; and behavior. Radiation effects are seen as well as understood on the basis of ground-based data, with the possible exception of HZE-particle radiation. The need for carefully constructed ground research to prepare for space experiments is stressed.

Dietlein, L. F.↗

Tilt rotor technology thrusts

This paper provides an overview of the results of on-going research investigations associated with the XV-15 program. The XV-15 data and an understanding of the technological elements that go into tilt rotor design can provide a series of benchmark points from which to proceed with new design. The work to refine the estimates of vertical-lift performance, the influence of airframe aerodynamics, and the work planned to establish rotor-limiting flight conditions are discussed. An initial look at short takeoff and landing (STOL) performance is provided and the lessons learned and on-going work in aeroelastic testing and data handling is described. Structural loads and stability and control systems work which have applicability to new design efforts are also shown. The paper concludes with some ideas for longer-range generic investigations to advance the state of the art.

Magee, J. P.↗

Injection module thrust vector control

A three-axis controlled Injection Module propelled by a Star 48 solid rocket motor has been considered for use as a final 'kick' stage to supplement the Inertial Upper Stage in a proposed launch option for the Galileo and International Solar Polar missions. A flight control law for the Injection Module is developed. A position plus rate control law is considered, with integral, path guidance, and derived rate terms added for improved pointing accuracy and fuel efficiency. Selection of control gains is accomplished with the help of analytical limit cycle expressions and verified by computer simulation of the closed loop system. A computer simulation of the flight control system is built around a rigid spacecraft model with gyro dynamics and thruster delays included. Models for pitch/yaw/roll disturbance torques are included. Through simple gain changes the proposed flight control law is shown to accommodate the widely different mass properties of the Galileo and International Solar Polar spacecraft. Pointing accuracies of better than the desired 0.2 degrees are achieved.

Bell, C. E.↗

Thrust for interorbital propulsion - A question of lifetime

The most promising operational window for the use of magnetoplasmadynamic (MPD) thrusters is identified to be at megawatt power levels for orbital maneuvering. For such applications, the operation of a steady-state MPD thruster system imposes stringent requirements on the lifetime of thruster surfaces which will erode due to interactions with the plasma working fluid. Basic erosion mechanisms are presented and the problems associated with measuring the erosion rates are discussed. An experimental approach that would allow the development of a phenomenological model for erosion is proposed.

Gabriel, S. B.↗

Synsedimentary deformation and thrusting on the eatern margin of the Barberton Greenstone belt, Swaziland

Mapping on the eastern margin of the 3.6 to 3.3 Ga Barberton Greenstone Belt NW Swaziland has revealed a tectonic complex which is more than 5 km thick. The area consists of fault bound units made up of three lithological associations. Some of these were affected by four phases of deformation. Fold structures, foliations, and lineations are associated with the deformation. Sedimentation, geological structures, and evolutionary history of the area are explained.

Lamb, S. H.↗

Small centrifugal pumps for low-thrust rocket engines

Six small, low specific speed centrifugal pump configurations were designed, fabricated, and tested. The configurations included shrouded, and 25 and 100% admission open face impellers with 2 inch tip diameters; 25, 50, and 100% emission vaned diffusers; and volutes with conical exits. Impeller tip widths varied from 0.030 inch to 0.052 inch. Design specific speeds (N sub s = RPM*GPM**0.5.FT**0.75) were 430 (four configurations) and 215 (two configurations). The six configurations were tested with water as the pumped fluid. Noncavitating performance results are presented for the design speed of 24,500 rpm over a flowrate range from 1 to 6 gpm for the N sub s = 430 configurations and test speeds up to 29,000 rpm over a flowrate range from 0.3 to 1.2 gpm for the N sub s = 215 configurations. Cavitating performance results are presented over a flowrate range from 60 to 120% of design flow. Fabrication of the small pump conponents is also discussed.

Furst, R. B.↗

Space station auxiliary thrust chamber technology

A program to design, fabricate and test a 50 lb sub f (222 N) thruster was undertaken (Contract NAS 3-24656) to demonstrate the applicability of the reverse flow concept as an item of auxiliary propulsion for the space station. The thruster was to operate at a mixture ratio (O/F) of 4, be capable of operating for 2 million lb sub f- seconds (8.896 million N-seconds) impulse with a chamber pressure of 75 psia (52 N/square cm) and a nozzle area ratio of 40. Superimposed was also the objective of operating with a strainless steel spherical combustion chamber, which limited the wall temperature to 1700 F (1200 K), an objective specific impulse of 400 lb sub f sec/lbm (3923 N-seconds/Kg), and a demonstration of 500,000 lb sub f-seconds (2,224,000 N-seconds) of impulse. The demonstration of these objectives required a number of design iterations which eventually culminated in a very successful 1000 second demonstration, almost immediately followed by a changed program objective imposed to redesign and demonstrate at a mixture ratio (O/F) of 8. This change was made and more then 250,000 lb sub f seconds (1,112,000 N-seconds) of impulse was successfully demonstrated at a mixture ratio of 8. This document contains a description of the effort conducted during the program to design and demonstrate the thrusters involved.

Senneff, J. M.↗

Conventionally cast and forged copper alloy for high-heat-flux thrust chambers

The combustion chamber liner of the space shuttle main engine is made of NARloy-Z, a copper-silver-zirconium alloy. This alloy was produced by vacuum melting and vacuum centrifugal casting; a production method that is currently now available. Using conventional melting, casting, and forging methods, NASA has produced an alloy of the same composition called NASA-Z. This report compares the composition, microstructure, tensile properties, low-cycle fatigue life, and hot-firing life of these two materials. The results show that the materials have similar characteristics.

Kazaroff, John M.↗

The scaling of model test results to predict intake hot gas reingestion for STOVL aircraft with augmented vectored thrust engines

The difficulties of modeling the complex recirculating flow fields produced by multiple jet STOVL aircraft close to the ground have led to extensive use of experimental model tests to predict intake Hot Gas Reingestion (HGR). Model test results reliability is dependent on a satisfactory set of scaling rules which must be validated by fully comparable full scale tests. Scaling rules devised in the U.K. in the mid 60's gave good model/full scale agreement for the BAe P1127 aircraft. Until recently no opportunity has occurred to check the applicability of the rules to the high energy exhaust of current ASTOVL aircraft projects. Such an opportunity has arisen following tests on a Tethered Harrier. Comparison of this full scale data and results from tests on a model configuration approximating to the full scale aircraft geometry has shown discrepancies between HGR levels. These discrepancies although probably due to geometry and other model/scale differences indicate some reexamination of the scaling rules is needed. Therefore the scaling rules are reviewed, further scaling studies planned are described and potential areas for further work are suggested.

Penrose, C. J.↗

Constrained sheath optics for high thrust density, low specific impulse ion thrusters

The results of an experimental study showing that a contoured, fine wire mesh attached to the screen grid can be used to control the divergence characteristics of ion beamlets produced at low net-to-total accelerating voltage ratios are presented. The influence of free and constrained-sheath optics systems on beamlet divergence characteristics are found to be similar in the operating regime investigated, but it was found that constrained-sheath optics systems can be operated at higher perveance levels than free-sheath ones. The concept of a fine wire interference probe that can be used to study ion beamlet focusing behavior is introduced. This probe is used to demonstrate beamlet focusing to a diameter about one hundreth of the screen grid extraction aperture diameter. Additional testing is suggested to define an optimally contoured mesh that could yield well focused beamlets at net-to-total accelerating voltage ratios below about 0.1.

Wilbur, Paul J.↗

Low thrust viscous nozzle flow fields prediction

An existing Navier-Stokes code (PARC2D) was used to compute the nozzle flow field. Grids were generated by the interactive grid generator codes TBGG and GENIE. All computations were made on the NASA/MSFC CRAY X-MP computer. Comparisons were made between the computations and MSFC in-house wall pressure measurements for CO2 flow through a conical nozzle having an area ratio of 40. Satisfactory agreements exist between the computations and measurements for different stagnation pressures of 29.4, 14.7, and 7.4 psia, at stagnation temperature of 1060 R. However, agreements did not match precisely near the nozzle exit. Several reasons for the lack of agreement are possible. The computational code assumes a constant gas gamma, whereas the gamma i.e. the specific heat ratio for CO2 varied from 1.22 in the plenum chamber to 1.38 at the nozzle exit. The computations also assumes adiabatic and no-slip walls. Both assumptions may not be correct. Finally, it is possible that condensation occurs during the nozzle expansion at the low stagnation pressure. The next phase of the work will incorporate variable gamma and slip wall boundary conditions in the computational code and develop a more accurate computer code.

Liaw, Goang-Shin↗

An overview of key technology thrusts at Bell Helicopter Textron

Insight is provided into several key technologies at Bell. Specific topics include the results of ongoing research and development in advanced rotors, methodology development, and new configurations. The discussion on advanced rotors highlight developments on the composite, bearingless rotor, including the development and testing of full scale flight hardware as well as some of the design support analyses and verification testing. The discussion on methodology development concentrates on analytical development in aeromechanics, including correlation studies and design application. New configurations, presents the results of some advanced configuration studies including hardware development.

Harse, James H.↗

Fixed wing CCW aerodynamics with and without supplementary thrust deflection

The concept of circulation control was successfully demonstrated in flight using an A-6 aircraft. Circulation control can provide an aircraft with STOL performance of heavy lift capability. For ship based Naval aircraft the lower takeoff and landing velocities result in reduced deck gear and wind over the deck requirements. Circulation control airfoils can be mechanically less complex and lightweight compared to multi-element high lift airfoils.

Nichols, J. H.↗

The earth's ring current - Present situation and future thrusts

Particle distributions, currents, and the ring current situation prior to the August 1984 launch of the AMPTE Charge Composition Explorer (CCE) are discussed. CCE results which demonstrate the capability of these new measurements to pursue questions of ring current sources, energization, and transport are presented. Consideration is given to various ring current generation mechanisms which have been discussed in the literature, and a two-step generation process which to a certain extent unifies the previous mechanisms is presented. The first in-situ global observations of ring current decay as obtained through the detection of energetic neutral atoms generated by charge exchange interactions between the ring current and hydrogen geocorona are discussed, as well as the possibility of using the detection of energetic neutral atoms to obtain global images of the earth's ring current.

Williams, D. J.↗

Refine your search to explore more results.