Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structural Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Diffused phase transitions in Pb(Zr{sub 0.65}Ti{sub 0.35})O{sub 3}-Pb(Fe{sub 2/3}W{sub 1/3})O{sub 3} multiferroics

The solid solutions of (1−x)Pb(Zr{sub 0.65}Ti{sub 0.35})O{sub 3}-xPb(Fe{sub 2/3}W{sub 1/3})O{sub 3} in different ratios were fabricated by a high-temperature solid-state reaction method using high-purity oxides for possible multi-ferroic applications. Structural analysis using x-ray diffraction powder patterns of the system by Rietveld refinement method exhibits the formation of rhombohedral phase with R3c space group. Detailed studies of dielectric permittivity as a function of temperature of the systems show that the frequency independent dielectric maximum temperature shifts toward room temperature on increasing x. In addition to this, the degree of diffuseness of the permittivity anomaly is more pronounced for higher content of Pb(Fe{sub 2/3}W{sub 1/3})O{sub 3}, implying the existence of a composition-induced diffuse phase transition for the limited range of compositional ratios. Detailed impedance spectroscopy analysis shows the contributions of grain, grain boundary, and interfacial polarizations in the resistive characteristics and conduction mechanism of the materials. The weak ferromagnetic and saturated ferroelectric loops indicate that system with x = 0.1, 0.2 have good multiferroic characteristics, and may be useful for future spintronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced power factor and reduced thermal conductivity of a half-Heusler derivative Ti{sub 9}Ni{sub 7}Sn{sub 8}: A bulk nanocomposite thermoelectric material

We report a half-Heusler (HH) derivative Ti{sub 9}Ni{sub 7}Sn{sub 8} with VEC = 17.25 to investigate the structural changes for the optimization of high thermoelectric performance. The structural analysis reveals that the resulting material is a nanocomposite of HH and full-Heusler with traces of Ti{sub 6}Sn{sub 5} type-phase. Interestingly, present nanocomposite exhibits a significant decrease in thermal conductivity due to phonon scattering and improvement in the power factor due to combined effect of nanoinclusion-induced electron injection and electron scattering at interfaces, leading to a boost in the ZT value to 0.32 at 773 K, which is 60% higher than its bulk counterpart HH TiNiSn.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Process monitoring of additive manufacturing by using optical tomography

Parts fabricated by means of additive manufacturing are usually of complex shape and owing to the fabrication procedure by using selective laser melting (SLM), potential defects and inaccuracies are often very small in lateral size. Therefore, an adequate quality inspection of such parts is rather challenging, while non-destructive-techniques (NDT) are difficult to realize, but considerable efforts are necessary in order to ensure the quality of SLM-parts especially used for aerospace components. Thus, MTU Aero Engines is currently focusing on the development of an Online Process Control system which monitors and documents the complete welding process during the SLM fabrication procedure. A high-resolution camera system is used to obtain images, from which tomographic data for a 3dim analysis of SLM-parts are processed. From the analysis, structural irregularities and structural disorder resulting from any possible erroneous melting process become visible and may be allocated anywhere within the 3dim structure. Results of our optical tomography (OT) method as obtained on real defects are presented.

42 ENGINEERING↗

Evidence and detailed study of a second-order phase transition in the (C{sub 6}H{sub 11}NH{sub 3}){sub 2}[PbI{sub 4}] organic-inorganic hybrid material

The thermal properties of the organic-inorganic hybrid material (C{sub 6}H{sub 11}NH{sub 3}){sub 2}[PbI{sub 4}] are investigated using diffuse reflectivity, spectroscopic ellipsometry, differential scanning calorimetry, Raman spectroscopy, and X-ray diffraction. The diffuse reflectivity, performed in heating mode, clearly evidences the presence of a singularity at 336 K. This is confirmed by the temperature dependence of the spectroscopic ellipsometry spectra, which points out a second-order phase transition at 336 K with a critical exponent ∼0.5. Differential scanning calorimetry measurements on a polycrystalline powder of (C{sub 6}H{sub 11}NH{sub 3}){sub 2}[PbI{sub 4}] show a reversible phase transition detected at T{sub C} = 336 K without hysteresis. Raman spectroscopy data suggest that this transition arises from a change in the interactions between inorganic sheets (([PbI{sub 4}]{sup 2−}){sub ∞}) and organic protonated molecules ([C{sub 6}H{sub 11}NH{sub 3}]{sup +}). The structural analysis from power X-ray diffraction reveals an incomplete order-disorder transition of the cyclohexylammonium cation, causing a subtle contraction of the inter-plane distance. The transition results from repulsive close contacts between the organic molecules in the interlayer spacing.

36 MATERIALS SCIENCE↗

Solid-state EPR strategies for the structural characterization of paramagnetic NO adducts of frustrated Lewis pairs (FLPs)

Anisotropic interactions present in three new nitroxide radicals prepared by N,N addition of NO to various borane-phosphane frustrated Lewis pairs (FLPs) have been characterized by continuous-wave (cw) and pulsed X-band EPR spectroscopies in solid FLP-hydroxylamine matrices at 100 K. Anisotropic g-tensor values and {sup 11}B, {sup 14}N, and {sup 31}P hyperfine coupling tensor components have been extracted from continuous-wave lineshape analyses, electron spin echo envelope modulation (ESEEM), and hyperfine sublevel correlation spectroscopy (HYSCORE) experiments with the help of computer simulation techniques. Suitable fitting constraints are developed on the basis of density functional theory (DFT) calculations. These calculations reveal that different from the situation in standard nitroxide radicals (TEMPO), the g-tensors are non-coincident with any of the nuclear hyperfine interaction tensors. The determination of these interaction parameters turns out to be successful, as the cw- and pulse EPR experiments are highly complementary in informational content. While the continuous-wave lineshape is largely influenced by the anisotropic hyperfine coupling to {sup 14}N and {sup 31}P, the ESEEM and HYSCORE spectra contain important information about the {sup 11}B hyperfine coupling and nuclear electric quadrupolar interaction. The set of cw- and pulsed EPR experiments, with fitting constraints developed by DFT calculations, defines an efficient strategy for the structural analysis of paramagnetic FLP adducts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tailoring the magnetic properties of new Fe-Ni-Co-Al-(Ta,Nb)-B superelastic rapidly quenched microwires

Ferromagnetic Fe-Ni-Co-Al-(Ta,Nb)-B microwires with diameters from 170 μm to 50 μm, which possess both superelastic and good magnetic properties, have been prepared by rapid quenching from the melt using the in rotating water spinning technique followed by cold-drawing and ageing. The cold-drawing and annealing processes lead to the initialization of premartensitic phases as confirmed by the X-ray diffraction and scanning transmission electron microscopic investigations, more significantly in the 50 μm cold-drawn microwires. An increase in the coercive field and in the saturation magnetization has been obtained by annealing, more importantly in the case of Nb-containing alloy. Ageing by thermal or current annealing led to the initialization of the superelastic effect. High values of strain of up to 1.8%, very good repeatability under successive loading, and values of superelastic effect of up to 1.2% have been achieved. The structural analysis coupled with the stress-strain data suggests that these materials annealed at 800 °C have superelastic potential at reduced ageing times. The magnetic behavior was found to be easily tailored through both thermal and thermomagnetic treatments with changes in the magnetic parameters which can be contactless detected. The results are important for future applications where both mechanical and magnetic properties matter, i.e., sensing/actuating systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and magnetic studies of nanocrystalline Y{sub 2}Ir{sub 2}O{sub 7}

In this paper, we discuss synthesis of Y{sub 2}Ir{sub 2}O{sub 7} nanoparticles via chemical solution process. Structural analysis shows single cubic phase with Fd-3m space group symmetry. The particle size and distribution were studied by Transmission Electron Microscopy experiments. The average particle size turns out to be 50nm, which is in good agreement with the XRD results. Magnetic characterization shows no evidence of long range ordering even in presence of strong correlations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of annealing on structural and optical properties of sol-gel prepared Cd doped ZnO thin films

Zn{sub 1-x}Cd{sub x}O thin films have been prepared by sol-gel spin coating method. Structural analysis shows that the Cd substitution into the wutrzite ZnO lattice is achieved up to about 20 mol %. The optical band gap is found to decrease with the increase in Cd content. Increase in the annealing temperature up to a certain critical temperature leads to band gap narrowing because of the proper substitution of Zn by Cd and thereafter the band gap increases due to Cd re-evaporation from the lattice sites. This critical temperature lowers down with the increase in Cd doping concentration. The resistivity decreases with the increase in Cd content and increases with the increase in annealing temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth of MoO{sub 3} nanostructured thin films as a function of O{sub 2}-partial pressure

In this report, we synthesized molybdenum trioxide (α-MoO{sub 3}) nanostructured thin films (NST{sub s}) with nanoflakes (NF{sub s}) on the Ni-coated glass substrates employing plasma assisted sublimation process (PASP) as a function of oxygen partial pressure (PO{sub 2}). The effect of oxygen partial pressure on structural, morphological, and vibrational properties have been investigated systematically. The structural analysis divulged that all films deposited at different PO{sub 2} have pure orthorhombic phase, no impurity phase is detected under the limit of resolution. The morphological studies of samples is carried out by SEM, revealed that features as well as alignment of MoO{sub 3} NST{sub s} can be monitored by PO{sub 2} and the sample having best features is obtained at 7.5×10{sup −2} Torr. In addition, the more insight information is accomplished by TEM/HRTEM on the best featured sample, which confirmed the single crystalline nature of nanoflakes. The vibrational study of all samples are performed by FTIR, and strongly supports the XRD observations. All the results are in consonance with each other.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impression of plasma voltage on growth of α-V{sub 2}O{sub 5} nanostructured thin films

In this communication, we synthesized vanadium pentoxide (α-V{sub 2}O{sub 5}) nanostructured thin films (NST{sub s}) accompanied with nanoflakes/ nanoplates on the Ni-coated glass substrates employing plasma assisted sublimation process (PASP) as a function of plasma voltage (V{sub p}). The effect of plasma voltage on structural, morphological, compositional, and vibrational properties have been studied systematically. The structural analysis divulged that all films deposited at different V{sub p} have pure orthorhombic phase, no impurity phase is detected under resolution limit of XRD and XPS. The morphological studies of samples is carried out by SEM, revealed that features as well as alignment of V{sub 2}O{sub 5} NST{sub s} is greatly monitored by V{sub p} and the film possessing the best features is obtained at 2500volt. In addition, XPS results reveal that V{sup 5+} oxidation state is the most prominent state in sample V{sub 2}, which represents better stoichiometric nature of film. The vibrational study of all samples is performed by FTIR and strongly support the XRD observations. All the results are in consonance with each other.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of Ni doping on transport properties of ZnO thin films

Nickel doped (Ni=0.05) and undoped Zinc Oxide (ZnO) thin films have been prepared by Pulsed laser deposition (PLD) technique. The structural analysis of the films was done by X-ray diffraction (XRD) studies which reveal absence of any secondary phase in the prepared samples. UV transmission spectra show that Ni doping reduces the transparency of the films. X-ray Photoelectron spectroscopy (XPS) also shows the presence of metallic Ni along with +2 oxidation state in the sample. Low temperature magneto transport properties of the ZnO and NiZnO films are also discussed in view of Khosla fisher model. Ni doping in ZnO results in decrease in magnitude of negative MR.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly (002) textured large grain bcc Cr{sub 80}Mn{sub 20} seed layer on Cr{sub 50}Ti{sub 50} amorphous layer for FePt-C granular film

Effect of bcc Cr{sub 80}Mn{sub 20} seed layer and Cr{sub 50}Ti{sub 50} amorphous texture inducing layer on the heteroepitaxy system in FePt-C granular film was studied by introducing a new concept of the layered structure. The concept suggested that the large grain seed layer in which the crystallographic texture was initially formed on an amorphous layer in the layered structure can reduce the angular distribution of (002) c-axis crystal orientation in the FePt-C granular film owing to heteroepitaxial growth. Structure analysis by X-ray diffraction revealed that (1) when the substrate heating temperature was elevated from 300 °C to 500 °C, grain size in the seed layer increased from 9.8 nm to 11.6 nm, and then decreased with further increasing the substrate temperature. The reduction of the grain size over 500 °C corresponds to the crystallization of the amorphous texture inducing layer, (2) when the grain size increased from 9.8 nm to 11.6 nm, the angular distribution of the (002) orientation in the seed layer dramatically decreased from 13.7° to 4.1°. It was shown that the large grain seed layer increased the perpendicular hysteresis in FePt-C granular film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

GISAXS study of Au-coated light-induced polymer gratings

Surface Relief Gratings (SRGs) are inscribed in the Au-coated azobenzene containing photosensitive polymer films on a glass substrate. The structures consist of micrometer-period sinusoidal patterns of sub-micron amplitudes, formed by photo-isomerization and molecular reorientation processes in the polymer film during exposure to the light interference pattern that drove the formation of a SRG; the precursor is a stack sequence of Au, polymer, and glass. The SRG structures were exposed in GISAXS geometry to high-intensity X-ray radiation from a liquid Ga source (0.134 nm). Scattered photons were registered by a 2D detector, and their intensity distribution enabled us to characterize the structures. Analysis of the 2D patterns yielded information about the pitch of the gratings as well as the thickness of the films forming the gratings. The GISAXS experiments were carried out at the Research Center Juelich.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of nickel seed layer on growth of α-V{sub 2}O{sub 5} nanostructured thin films

In this communication, we reported the role of Ni seed layer on the growth of vanadium pentoxide (α-V{sub 2}O{sub 5}) nanostructured thin films (NSTs) using plasma assisted sublimation process (PASP). Two different substrates, simple glass substrate and the Ni coated glass substrate (Ni thickness ∼ 100 nm) are employing in the present work. The influence of seed layer on structural, morphological, and vibrational properties have been studied systematically. The structural analysis divulged that both films deposited on simple glass as well as on Ni coated glass shown purely orthorhombic phase, no other phases are detected. The morphological studies of V{sub 2}O{sub 5} film deposited on both substrates are carried out by SEM, revealed that features of V{sub 2}O{sub 5} NSTs is completely modified in presence of Ni seed layer and the film possessing the excellent growth of nanorods (NRs) on Ni coated glass rather than simple glass. The HRTEM analysis of NRs is performed at very high magnification, shows very fine fringe pattern, which confirmed the single crystalline nature of nanorods. The vibrational study of NRs is performed using micro-Raman spectroscopy, which strongly support the XRD observations.

36 MATERIALS SCIENCE↗

The effect of atomic structure on interface spin-polarization of half-metallic spin valves: Co{sub 2}MnSi/Ag epitaxial interfaces

Using density functional theory calculations motivated by aberration-corrected electron microscopy, we show how the atomic structure of a fully epitaxial Co{sub 2}MnSi/Ag interfaces controls the local spin-polarization. The calculations show clear difference in spin-polarization at Fermi level between the two main types: bulk-like terminated Co/Ag and Mn-Si/Ag interfaces. Co/Ag interface spin-polarization switches sign from positive to negative, while in the case of Mn-Si/Ag, it is still positive but reduced. Cross-sectional atomic structure analysis of Co{sub 2}MnSi/Ag interface, part of a spin-valve device, shows that the interface is determined by an additional layer of either Co or Mn. The presence of an additional Mn layer induces weak inverse spin-polarisation (−7%), while additional Co layer makes the interface region strongly inversely spin-polarized (−73%). In addition, we show that Ag diffusion from the spacer into the Co{sub 2}MnSi electrode does not have a significant effect on the overall Co{sub 2}MnSi /Ag performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Composition dependent Fermi level shifting of Au decorated MoS{sub 2} nanosheets

In the present work, shifting of Fermi level of MoS{sub 2} nanosheets due to decoration of Au nanoparticles (Au NPs) is reported. Au NPs are grown on MoS{sub 2} nanosheets by chemical reduction method. The structural analysis of pristine MoS{sub 2} and Au NPs decorated MoS{sub 2} has been done using X-ray diffraction and transmission electron microscopy. The effect of Au NPs decoration on the Fermi energy level of MoS{sub 2} nanosheets have been monitored by scanning Kelvin probe microscopy, which measures the work function in terms of contact potential difference. The work function of pristine MoS{sub 2} is found to be 4.994 eV, and it increases linearly for Au-MoS{sub 2} with increasing concentration of Au NPs. The gradual increase in the work function values indicate a systematic shifting of Fermi energy level of MoS{sub 2} towards valence band due to decoration of Au NPs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multi-microscopy study of the influence of stacking faults and three-dimensional In distribution on the optical properties of m-plane InGaN quantum wells grown on microwire sidewalls

The optical properties of m-plane InGaN/GaN quantum wells grown on microwire sidewalls were investigated carrying out a correlative scanning transmission electron microscopy (STEM), atom probe tomography (APT), and micro-photoluminescence study applied on single nanoscale field-emission tips obtained by a focused ion beam annular milling. Instead of assuming simple rectangular composition profiles, yielding misleading predictions for the optical transition energies, we can thus take into account actual compositional distributions and the presence of stacking faults (SFs). SFs were shown to be responsible for a lowering of the recombination energies of the order of 0.1 eV with respect to those expected for defect-free quantum wells (QWs). Such energy reduction allows establishing a good correspondence between the transition energies observed by optical spectroscopy and those calculated on the basis of the QWs In measured composition and distribution assessed by STEM structural analysis and APT chemical mapping.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Orbital control of Rashba spin orbit coupling in noble metal surfaces

Rashba spin orbit coupling (SOC) in noble metal surfaces is of great importance for the application of metal films in spintronic devices. By combining the density-functional theory calculations with our recently developed orbital selective external potential method, we investigate the Rashba SOC in the Shockley surface states of Au(111) and Ag(111). We find that the large Rashba SOC in the sp-character surface states of Au(111) is mainly contributed by the minor d-orbitals in the surface states. While for the sd-character surface states, although they are dominated by the d-orbitals, Rashba splitting is found to be rather small. Band structure analysis reveals that this is mainly because the sd-character surface states are well below the Fermi level and can be less influenced by the asymmetric surface potential. We demonstrate that the Rashba SOC in noble metal surfaces can be effectively manipulated by shifting the d-orbitals in the surface states, which can be physically implemented through surface decoration. Our investigation provides a deep understanding on Rashba SOC in noble metal surfaces and could be helpful to their applications in spintronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Refine your search to explore more results.