Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Hydrogeochemical Modelling for Groundwater in Neyveli Aquifer, Tamil Nadu, India, Using PHREEQC: A Case Study

Sophisticated geochemical models have been used to describe and predict the chemical behaviour of complex natural waters and also to protect the groundwater resources from future contamination. One such model is used to study the hydrogeochemical complexity in a mine area. Extraction of groundwater from the coastal aquifer has been in progress for decades to mine lignite in Neyveli. This extraction has developed a cone of depression around the mine site. This cone of depression is well established by the geochemical nature of groundwater in the region. 42 groundwater samples were collected in a definite pattern and they were analysed for major cations, anions and trace elements. The saturation index (SI) of the groundwater for carbonate, sulphate and silica minerals was studied and it has been correlated with the recharge and the discharge regions. The SI of alumino silicates has been used to decipher the stage of weathering. The SI{sub Gibbsite} - SI{sub K-feldspar} has been spatially distributed and the regions of discharge and recharge were identified. Then two flow paths A1 and A2 were identified and inverse modelling using PHREEQC were carried out to delineate the geochemical process that has taken place from recharge to discharge. The initial and final solutions in both the flow paths were correlated with the thermodynamic silicate stability diagrams of groundwater and it was found that the state of thermodynamic stability of the end solutions along the flow path were approaching similar states of equilibrium at the discharge.

58 GEOSCIENCES↗

Optical properties and zero photoelastic constant of ns{sup 2}-type metal cation containing oxide glasses

Zero photoelasticity and the relevant optical properties in binary RO–SiO{sub 2} (R = Sn, Pb) and R′{sub 2}O{sub 3}–SiO{sub 2} (R′ = Sb, Bi) and ternary Bi{sub 2}O{sub 3}–B{sub 2}O{sub 3}–SiO{sub 2} glasses were systematically studied. The zero photoelastic silicate glass leads to zero stress-induced birefringence, providing application to an optical lens, a filter, a beam splitter, and a fiber optic sensor without stress-induced birefringence. In this study, a variety of zero photoelastic binary silicate and ternary borosilicate glasses with optical bandgaps of 3.1–3.9 eV containing highly polarized ns{sup 2}-type cations are reported.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Importance of Slag Structure to Boron Removal from Silicon during the Refining Process: Insights from Raman and Nuclear Magnetic Resonance Spectroscopy Study

Slag structure plays an important role in determining the relative ease of boron removal from silicon. Correlation between slag structure and boron removal thermodynamics was experimentally studied by Raman and nuclear magnetic resonance (NMR) spectroscopy using CaO-SiO{sub 2}-Na{sub 2}O slags with different optical basicities (0.6 to 0.71). Optimization of slag depolymerization leads to efficient removal of boron. The extent of nonbridged oxygen content (NBO/T) and boron removal gradually increased with an increase in optical basicity from 0.6 to 0.66: B{sub 2}O{sub 3} derived from boron oxidation captured nonbridging oxygens of Q{sup 0}(Si), Q{sup 1}(Si), and Q{sup 2}(Si), and was incorporated into the silicate network in the form of Q{sup 3}(Si and B). When optical basicity increased to 0.71, NBO/T rapidly increased and boron removal decreased considerably. Quick depolymerization of Q{sup 3}(Si and B) deteriorated the stability of boron. Various structural forms of boron in the silicate network were successfully detected: the BO{sub 3} trihedrons {sup [3]}B-3Si, {sup [3]}B-2Si-1NBO, and BO{sub 3} (nonring), and the BO{sub 4} tetrahedrons BO{sub 4} (1B, 3Si) and BO{sub 4} (0B, 4Si). BO{sub 4} (1B, 3Si) was the main structure contributing to the increase of boron capacity; BO{sub 3} (nonring), detected under higher optical basicity conditions, may cause deterioration of boron removal by suppressing its oxidation.

36 MATERIALS SCIENCE↗

Lime Dissolution in Foaming BOF Slag

The paper describes the dissolution mechanisms of lime into liquid and foaming slags relevant to the BOF process. Two different master slags are employed, representing two different periods of the converter process: an early stage where the FeO content is fixed to 45 wt pct, and a later stage where the FeO content is fixed to 25 wt pct. For these master slags, the ratio between CaO/SiO{sub 2} is varied to examine the effect of basicity on lime dissolution. Calcium silicates are formed and peeled off, or partially peeled off, from the interface between the lime cube and the slag in all cases. The main difference for the dissolutions in pure liquid slag and foaming slag is the controlling step for dissolution. In liquid slag, the controlling mechanism is the removal of the calcium silicate layers, while in foaming slag, the controlling mechanism is the contact area between the lime and the liquid slag phase of the foam. The strong convection in the foam enhance the dissolution process, in some cases, the lime even dissociates into small pieces.

36 MATERIALS SCIENCE↗

Theory and Practice: Measuring High-Pressure Electronic and Magnetic Properties

Measurements of the electronic and magnetic properties of Earth and planetary materials at high pressure play a crucial role in modern geoscience. There have been numerous advances in the field, primarily as a result of developments in diamond-anvil cell methods. In particular, synchrotron radiation techniques play an especially important role. The chapter begins with a short review of fundamental properties of the relevant materials, with emphasis on how these are altered under very high pressures and temperatures of the Earth's deep interior, followed by a discussion of different classes of electronic and magnetic excitations. Various techniques currently used for high-pressure studies are then described, beginning with optical spectroscopies, Moessbauer spectroscopy, elastic X-ray and neutron scattering, many new X-ray spectroscopy and inelastic scattering methods, transport techniques, and finally resonance methods. Selected examples of the techniques are given, with a common theme being the high P-T behavior of iron-containing oxides, silicates, and metals at conditions found throughout the Earth's interior. Applications to upper-mantle phases, 'simple' oxides, silicate perovskite and post-perovskite, volatiles, and iron and iron alloys are discussed, with an emphasis given to integrated studies utilizing a combination of different techniques to understand high P-T electronic and magnetic phenomena.

36 MATERIALS SCIENCE↗

Zeolite supported Pd catalysts for the complete oxidation of methane: A critical review

This review summarizes the recent literature reports on the development of zeolite supported Pd catalysts for the complete oxidation of methane. In-depth analysis reveals that different types of zeolite framework structures, regardless of the dimensionality, pore opening structure, and channel size, have little influence on the methane oxidation activity or the on-stream stability of the supported Pd catalysts. In contrast, the Si/Al ratio of a zeolite support plays a critical role. Both the catalytic activity and the on-stream stability of a Pd/zeolite catalyst increase with the increase of the Si/Al ratio. Catalysts supported on siliceous zeolites consistently show excellent light-off activity and remarkable on-stream stability whether in a dry or wet feed. Silanol nest defect sites in a siliceous zeolite are proposed to be the anchoring sites promoting the formation and minimizing the sintering of finely dispersed Pd nanoparticles. Remaining challenges in overcoming the sulfur poisoning effect are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Uranium speciation in acid waste-weathered sediments: The role of aging and phosphate amendments

Uranium speciation and lability are strongly coupled to mineral transformations in silicate sediments, particularly for sediments subjected to weathering in acidic, high-level radioactive waste, as occurred at the Department of Energy's Hanford (WA) site. In this study, uncontaminated Hanford sediments were reacted for 365 days with acidic (pH 3), uranium-bearing waste solutions, with and without phosphate in batch experiments, prior to detailed characterizations using electron microscopy, x-ray diffraction and x-ray absorption spectroscopy. In PO(4)(-)reactant free systems, uranium speciation was controlled initially by precipitation of compreignacite [K-2(UO2)(6)O-4(OH)(6)center dot 8H(2)O]-and becquerelite [Ca(UO2)(6)O-4(OH)(6)center dot 8H(2)O]-like species. Subsequent further removal of uranium coincided with that of Si and accumulation of boltwoodite, [(K, Na)(UO2)(2)O-4(HSiO4)(2)center dot 0.5(H2O)]-like species of uranium at 180 and 365 days. When present, PO4 exerted a direct and strong control over U speciation. The detection of meta-ankoleite, [K-2(UO2)(2)O-4(PO4)(2)center dot 6H(2)O] at all reaction times when U was present emphasizes the importance of dissolved phosphate as a control on U speciation. Here, meta-ankoleite appears well crystallized and when it occurs as the principal product of sediment weathering, its low solubility is expected to limit dissolved U(VI) concentrations in groundwater. Although boltwoodite solubility is also low, it is formed more slowly (and only when PO4 is absent), after initial precipitation of more soluble, less crystalline uranyl hydroxides. In the context of Hanford crib waste our results suggest that with PO4 present, nearly all uranium would have precipitated in the upper soil.

Perdrial, Nicolas↗

Engineering the bonding scheme in C-S-H: The iono-covalent framework

On the basis of recent molecular simulation and experimental studies, we discuss two possible strategies for tuning the mechanical properties of cementitious materials by modifying the bonding scheme in the hydrates at molecular level. We focus the discussion on the calcium silicate hydrates (C-S-H). A first strategy would be based on the strengthening of the network of cohesion forces acting between the individual C-S-H lamellae or between their crystallites. Atomic scale simulations by ab initio, molecular dynamics and energy minimization techniques show that the iono-covalent forces between individual C-S-H layers or C-S-H layer stacks, separated by strongly localized calcium ions and water molecules, are orders of magnitude larger than the ionic correlation forces acting between C-S-H surfaces separated by nm- or multi-nm-thick layers of mobile water molecules and ions. The elastic properties derived from this iono-covalent bonding scheme are in good agreement with experimental values obtained by ultrasonic or statistical ('grid') nanoindentation techniques. The concept picture for C-S-H which follows is that of a crystalline semi-continuum, with dense domains ('crystallites' or 'particles') iono-covalently bonded to each other, possibly entangled also, and embedded as long as the mesoscale porosity is water-saturated in a relatively weak attractive stress field due to fluctuating electrostatic forces. Depending on the size, the aspect ratio, and the turbostratic order of the crystallites, and also the composition of the interstitial solution, the relative importance of each contribution could be modified. This provides the basis for a better control of properties such as early age or long term strength development for instance. In this respect, the microstructure-properties relationships in clay minerals provide interesting leads, pointing to the importance of bonding continuity rather than bond strength. A second strategy to tune the mechanical properties of cement systems, akin to a biomimetic approach, is to hybridize the hydrates by grafting organic moieties on the mineral lamellae. This can be achieved by controlled hydrolysis of organo-silane precursor mixtures or by performing the hydration of the anhydrous silicates in silanized polymer solutions. The outcome may be materials with improved fracture energy and larger strain at failure.

36 MATERIALS SCIENCE↗

An X-ray photoelectron spectroscopy study of the hydration of C{sub 2}S thin films

Electron-beam evaporation was used to produce thin films of β-dicalcium silicate. Chemical and mineralogical compositions were characterized by X-ray photoelectron spectroscopy (XPS) and grazing-angle X-ray diffraction (GAXRD), respectively. Results show that no fractionation occurs during evaporation and isostructural condensation of the material as synthesized films have the same composition as the initial bulk material. Samples were gradually hydrated under saturated water spray conditions and analyzed with XPS. Polymerization of the silicate chains due to hydration, and subsequent formation of C-S-H, has been monitored through evaluation of energy shifts on characteristic silicon peaks. Quantitative analyses show changes on the surface by the reduction of the Ca/Si ratio and an increase on the difference between binding energies of bridging and non-bridging oxygen. Finally, SEM/FIB observation shows clear differences between the surface and cross section of the initial sample and the reacted sample.

36 MATERIALS SCIENCE↗

Atomistic modeling of crystal structure of Ca{sub 1.67}SiH{sub x}

The atomic structure of calcium-silicate-hydrate (C{sub 1.67}-S-H{sub x}) has been investigated by theoretical methods in order to establish a better insight into its structure. Three models for C-S-H all derived from tobermorite are proposed and a large number of structures were created within each model by making a random distribution of silica oligomers of different size within each structure. These structures were subjected to structural relaxation by geometry optimization and molecular dynamics steps. That resulted in a set of energies within each model. Despite an energy distribution between individual structures within each model, significant energy differences are observed between the three models. The C-S-H model related to the lowest energy is considered as the most probable. It turns out to be characterized by the distribution of dimeric and pentameric silicates and the absence of monomers. This model has mass density which is closest to the experimental one.

36 MATERIALS SCIENCE↗

Development of silica-enriched cement-based materials with improved aging resistance for application in high-temperature environments

Understanding the effects of high temperature (HT) and high pressure (HP) conditions on the microstructure of cement-based materials is critical to the construction and safe operation of deep oil and gas wells. Under such conditions, the persistence of calcium-silicate-hydrate (C-S-H) gel is compromised by ongoing crystallization that, if not controlled, may adversely affect the durability of the cement sheath. This work investigates the effect of silica content >35% by-weight-of-cement (BWOC), silica particle size, and solid volume fraction (SVF) on the microstructure and phase composition of cement-silica blends cured hydrothermally at 200 °C and 20.7 MPa. The results of X-ray diffraction and electron microprobe analysis revealed significant impact of these three mix design parameters on the final phase assembly, and on the conversion rate of semi-crystalline C-S-H to gyrolite and 11 Åtobermorite. Incorporation of more fine siliceous material suppressed dissolution of coarse silica particles, resulting in a matrix with improved homogeneity and dominated by fine gel pores. Mixes with lower SVF showed greater formation of 11 Å tobermorite, a higher degree of crystallinity and/or greater crystallite size. Prolonged HTHP curing of all systems (up to three months in this study), irrespective of the initial SVF, increased the fraction of capillary pores, indicating void coalesce caused by crystal growth. However, we find that this coarsening is less pronounced in systems with less pore space available for crystallization.

36 MATERIALS SCIENCE↗

Acceleration of OPC by CAC in binary and ternary systems: The role of pore solution chemistry

In dry-mortar-formulations calcium aluminate cement (CAC) is often used as a set accelerator for ordinary Portland cement (OPC). However, a critical amount of CAC is able to delay not only the silicate reaction but also the renewed C{sub 3}A dissolution of an OPC. This delay can be counteracted by adding an appropriate amount of calcium sulfate (C$) to the mix OPC/CAC. The initial hydration period is dominated by fast ettringite formation from CA (CAC) and CaSO{sub 4} from OPC generating early strength. High aluminum and low calcium concentrations in the pore solution probably hinder C-S-H seeding and precipitation, thus preventing alite dissolution. Aluminum has to be initially removed by precipitating hydrate phases to change the pore solution chemistry. The start of the silicate reaction is then induced by increasing the calcium concentration in the pore solution.

36 MATERIALS SCIENCE↗

Effect of fly ash microsphere on the rheology and microstructure of alkali-activated fly ash/slag pastes

Highlights: • Fly ash microsphere is collected from fly ash with electrostatic adsorption classification. • Fly ash microsphere acts as 'ball-bearings' in alkali-activated cements. • Fly ash microsphere works as inorganic dispersing agent to improve workability. • Fly ash microsphere exhibits a good compatibility in alkali-activated cements. - Abstract: The highly viscous property of alkali silicate-activated cements is one of the critical challenges that hinder their wide application. The present study focuses on ameliorating the rheological performance of sodium silicate-activated fly ash/slag pastes by using fly ash microsphere (FAM), which are highly spherical particles collected from fly ash with electrostatic adsorption classification technology. The FAM particles work as 'ball-bearings' in the pastes to reduce the internal friction between fly ash and slag grains, and meanwhile mitigate the agglomeration of flocs and fragmentation to release the locked water. The interrelationship between the FAM particle geometry and plastic viscosity of the paste is well described by the Krieger-Dougherty equation, which supports the proposed mechanisms of 'ball-bearings' effects. FAM can work as an inorganic dispersing agent to improve the workability of alkali-activated cement products for a variety of application aspects.

36 MATERIALS SCIENCE↗

Physicochemical properties of the Portland cement-based mortar exposed to deep seafloor conditions at a depth of 1680 m

Achieving breakthroughs in marine technologies requires the development of infrastructures submerged in deep-sea environments, whose physicochemical effects on cement-based materials considerably differ from those of shallow seas. However, very few studies focused on the cement-based materials subjected to deep-sea conditions. This work investigates the changes in the compressive strength and phase composition of the cement mortar kept on the seafloor with a depth of 1680 m for 608 d. The mortar specimens salvaged from the seafloor exhibited severe visible damages, including softened mashy structures and significantly decreased compressive strengths. The obtained X-ray diffraction, scanning electron microscopy, and nuclear magnetic resonance data revealed that the dissolution of portlandite, decalcification of calcium (alumino) silicate hydrate, and formation of brucite, magnesium (alumino) silicate hydrate, a hydrotalcite-like phase, thaumasite, and ettringite likely contributed to the disintegration of mortar, which could be further accelerated by the low temperature of the deep-sea environment.

36 MATERIALS SCIENCE↗

Properties and reaction mechanism of phosphoric acid activated metakaolin geopolymer at varied curing temperatures

Reaction mechanism of phosphoric activated metakaolin is studied by techniques of calorimetry, ICP-OES, FTIR and NMR taking curing temperature and [H{sub 3}PO{sub 4}] as variables. A two-stage curing method including pre-curing at 40 °C for 24 h and second curing at 60/80 °C for another 24 h effectively mitigates thermal-cracking of the obtained silico-aluminate phosphate (SAP) samples, whose maximum compressive strength reaches 120 MPa. Dealumination of metakaolin in H{sub 3}PO{sub 4} solution produces low aluminate-containing silicate units and subsequently condensation of silicate tetrahedrons occurs. Higher temperature and H{sub 3}PO{sub 4} concentration accelerate the two processes. After complete reaction, A{sub VI} structure from metakaolin disappears and the dissolved Al preferably forms Al{sub VI}-O-P units. During reaction, metastable P-O-P intermediate appears in SAPs with higher P/Al ratio and finally transforms into Al-O-P structure upon PO{sub 4}{sup 3−} consumption. Phosphate units as P(OAl){sub x}(H{sub 2}O){sub 4-x} are connected with Si or Al structure units. Major structural units of the SAPs include Al-O-P, Si-O-P, Si-O-Si, and Si-O-Al.

36 MATERIALS SCIENCE↗

Strategies for control and mitigation of efflorescence in metakaolin-based geopolymers

Efflorescence can be harmful to material performance as a consequence of microstructural changes due to leaching and carbonation of alkalis. This article identifies mechanisms of efflorescence in metakaolin-based geopolymers, and approaches to reduce free/mobile alkali cations and pore network connectivity, and hence reduce efflorescence. Mechanical, mass transport and microstructural properties are assessed in metakaolin-based geopolymer cements produced using different alkali concentrations in the alkali activator and substitution/addition of blast furnace slag, silica fume, calcium aluminate cement, silicone oil and a dispersive admixture. The most effective strategy to reduce efflorescence results from increasing Si/Al in the geopolymer gel by addition of soluble silicate, silica fume or silicone oil. Addition of calcium aluminate cement or a dispersive admixture also reduce efflorescence, but are less effective. These results confirm that efflorescence may be reduced by controlling the amount of soluble silicates and reducing free alkali cations in geopolymers, providing enhanced performance and durability.

36 MATERIALS SCIENCE↗

The effects of calcium hydroxide and activator chemistry on alkali-activated metakaolin pastes

The impact of calcium hydroxide as an additive in sodium hydroxide- and silicate-activated metakaolin pastes is presented with a primary aim to ascertain the specific effects of calcium on the reaction kinetics and phase formation. FTIR and XRD are employed to understand the interaction of calcium hydroxide (10 wt% replacement of metakaolin) in 1, 5 and 10 M NaOH-activated pastes (and equivalent molarity Na{sub 2}SiO{sub 3}-activated pastes), with a focus on its impact on the nanoscale properties of the sodium-alumino-silicate-hydrate (N-A-S-(H)) gel. In situ FTIR and ICC are used to assess the impact of calcium hydroxide on the reaction kinetics, including the rate of metakaolin dissolution and associated rate of N-A-S-(H) gel growth. It is found that calcium hydroxide is effective at accelerating the reaction kinetics of 5 M Na{sub 2}SiO{sub 3}-activated metakaolin due to the formation of an initial calcium-rich gel that promotes additional metakaolin dissolution and enhances N-A-S-(H) gel formation.

36 MATERIALS SCIENCE↗

Refine your search to explore more results.