Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHIP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Practical and efficient magnetic heat pump

Method for pumping heat magnetically at room temperature is more economical than existing refrigeration systems. Method uses natural magneto-thermal effect of gadolinium metal to establish temperature gradient across length of tube. Regenerative cyclic process in which gadolinium sample is magnetized and gives off heat at one end of tube, and then is demagnetized at other end to absorb heat has established temperature gradients of 144 degrees F in experiments near room temperature. Other materials with large magnetothermal effects can be used below room temperature. Possible commercial applications include freeze-drying and food processing, cold storage, and heating and cooling of buildings, plants, and ships.

Brown, G. V.↗

Damage-detection system for LNG carriers

System utilizes array of acoustical transducers to detect cracks and leaks in liquefied natural gas (LNG) containers onboard ships. In addition to detecting leaks, device indicates location and leak rate.

Mastandrea, J. R.↗

Emergency escape device

Modified egress mechanism used to deploy Lunar Roving Vehicle, could be used in shipping, safety exits, amusement parks, and other applications to gently lower people or equipment several hundred feet.

Burch, J. L.↗

Ocean-wave ray or crest diagrams in shoaling waters

Program developed to aid studies of linear ocean-wave refraction features random-access modular storage of bathymetry data to minimize computer resource requirements. Program is study tool used to forecast ocean conditions for ship routing and offshore activities. It also allows very large geographical regions to be studied with fewer computer resources, but does not restrict applicability of model to smaller areas.

Morris, W. D.↗

The use of LANDSAT imagery to locate uncharted coastal features on the Labrador coast

A survey of several offshore islands, rocks and shoals on the Labrador Coast was performed, using LANDSAT imagery to assist in the location of uncharted hydrographic features. Several satellite coverages of the coast were studied prior to the survey, and suspected shoal points identified. Using map-derived control points and monocomparator measurements of the LANDSAT images, the positions of these points were determined by mathematical adjustment to an estimated position accuracy of 150 meters. As a result, on the survey, an uncharted island and eight uncharted drying rocks, which might easily have escaped detection from a survey ship, were verified and positioned. To check the accuracy of the coordinates derived from LANDSAT, three islands were positioned by standard ground survey methods. The positional differences, all less than 150 meters, are not plottable at the scale of the existing offshore charts. The LANDSAT positions were also used to control aerial photography of a shoal area for office compilation of a hydrographic chart.

Fleming, E. A.↗

V/STOL hover stability impact on hover control task

Longitudinal static stability requirements for V/STOL aircraft are discussed in terms of vertical landing on a small ship at night, response of the aircraft to air turbulence, and hovering flight. The increased pilot workload encountered under these flight conditions is considered. Results of a flight simulation study performed to evaluate a specific hover control task, two control systems - attitude rate command and translational velocity command, and the pilots' performance with and without turbulence are reported. It is concluded that the translational velocity command system provides the control requirements for good spot hovering capability and reduced pilot workload.

Whitaker, A. B.↗

Rationale for selection of a flight control system for lift cruise fan V/STOL aircraft

Various features of the lift cruise fan V/STOL concept are briefly reviewed. The ability to operate from small ships in adverse weather, low visibility, and rough sea conditions is emphasized as is the need for a highly capable, flexible, and reliabile flight control system. A three channel control by wire, digital flight control system is suggested. The requirement for automatic flight control, the advantage of control by wire implementation, the preference for a digital computer, and the need for three channel redundancy are among the factors discussed.

Konsewicz, R. K.↗

NAVTOLAND and flying qualities

The V/STOL operational capability is reviewed with emphasis on pilot workload and all-weather landing guidance systems. A research and development program to correlate and integrate the development of all systems and techniques involved in enabling the pilot to fly V/STOL aircraft onto ships and tactical sites is described. Aircraft design parameters that affect its control in the vertical takeoff and landing flight regimes are emphasized. Topics considered include: (1) integrated flight controls and displays; (2) low speed sensor; (3) air traffic control appraoch and landing guidance systems; (4) visual landing aids; (5) ground effect induced thrust variation problems; and (6) handling qualities.

Momiyama, T. S.↗

Water-vapor pressure control in a volume

The variation with time of the partial pressure of water in a volume that has openings to the outside environment and includes vapor sources was evaluated as a function of the purging flow and its vapor content. Experimental tests to estimate the diffusion of ambient humidity through openings and to validate calculated results were included. The purging flows required to produce and maintain a certain humidity in shipping containers, storage rooms, and clean rooms can be estimated with the relationship developed here. These purging flows are necessary to prevent the contamination, degradation, and other effects of water vapor on the systems inside these volumes.

Scialdone, J. J.↗

Data on conducting the SAMEX-76 experiment

The compilation of data on conducting the SAMEX-76 experiment is reported. This report includes many tables and graphs of the aircraft's flights and its measurements. Also given is the operation time of this equipment and the many observations that have been made by the Scientific Research Ship Akademik Korolev.

Source record↗

Skylab/EREP application to ecological, geological, and oceanographic investigations of Delaware Bay

Skylab/EREP S190A and S190B film products were optically enhanced and visually interpreted to extract data suitable for; (1) mapping coastal land use; (2) inventorying wetlands vegetation; (3) monitoring tidal conditions; (4) observing suspended sediment patterns; (5) charting surface currents; (6) locating coastal fronts and water mass boundaries; (7) monitoring industrial and municipal waste dumps in the ocean; (8) determining the size and flow direction of river, bay and man-made discharge plumes; and (9) observing ship traffic. Film products were visually analyzed to identify and map ten land-use and vegetation categories at a scale of 1:125,000. Digital tapes from the multispectral scanner were used to prepare thematic maps of land use. Classification accuracies obtained by comparison of derived thematic maps of land-use with USGS-CARETS land-use maps in southern Delaware ranged from 44 percent to 100 percent.

Klemas, V.↗

The 40 KW of Solar Cell Modules for the Large Scale Production Task a Low Cost Silicon Solar Array Project

Forty kilowatts of solar cell modules was produced in this program. This is equivalent to 4123 modules. The average power output per module was 9.7 watts at 16.5 volts, 60 C and 100 mW/sq cm. The peak production rate was 200 modules per week which is equal to 1.9 kW per week. This rate was sustained for over four and one-half months and is equivalent to 100 kW per year. This final report covers the solar cell module design, electrical and power performance, module preproduction environmental test results, production and shipping schedule, program summary, and delivery. A cost analysis section is written. Particular emphasis on the percentage of labor and material utilized in constructing a solar cell module is presented. Also included are cost reduction recommendations.

Jones, G. T.↗

The technology assessment of LTA aircraft systems

The advantages of conventional small and large airships over heavier than air aircraft are reviewed and the need for developing hybrid aircraft for passenger and heavy charge transport is assessed. Performance requirements and estimated operating costs are discussed for rota-ships to be used for short distance transportation near large cities as well as for airlifting civil engineering machinery and supplies for the construction of power stations, dams, tunnels, and roads in remote areas or on isolated islands.

Source record↗

TNT equivalency of M10 propellant

Peak, side-on blast overpressure and scaled, positive impulse have been measured for M10 single-perforated propellant, web size 0.018 inches, using configurations that simulate the handling of bulk material during processing and shipment. Quantities of 11.34, 22.7, 45.4, and 65.8 kg were tested in orthorhombic shipping containers and fiberboard boxes. High explosive equivalency values for each test series were obtained as a function of scaled distance by comparison to known pressure, arrival time and impulse characteristics for hemispherical TNT surface bursts. The equivalencies were found to depend significantly on scaled distance, with higher values of 150-100 percent (pressure) and 350-125 percent (positive impulse) for the extremes within the range from 1.19 to 3.57 m/cube root of kg. Equivalencies as low as 60-140 percent (pressure) and 30-75 percent (positive impulse) were obtained in the range of 7.14 to 15.8 m/cube root of kg. Within experimental error, both peak pressure and positive impulse scaled as a function of charge weight for all quantities tested in the orthorhombic configuration.

Mcintyre, F. L.↗

INMARSAT - The International Maritime Satellite Organization: Origins and structure

The third session of the International Conference on the Establishment of an International Maritime Satellite System established the International Maritime Satellite Organization (INMARSAT) in 1976. Its main functions are to improve maritime communications via satellite, thereby facilitating more efficient emergency communications, ship management, and maritime public correspondence services. INMARSAT's aims are similar to those of the Intergovernmental Maritime Consultative Organization (IMCO), the main United Nations organization dealing with maritime affairs. The specific functions of INMARSAT have been established by an Intersessional Working Group (IWG) which met three times between general conference meetings. Initial investment shares for the creation of INMARSAT were shared by the United States (17%), the United Kingdom (12%), the U.S.S.R. (11%), Norway (9.50%), Japan (8.45%), Italy (4.37%), and France (3.50%).

Doyle, S. E.↗

On the hysteresis of the sea surface and its applicability to wave height predictions

Because of the low dissipation rate of wave energy on the ocean's surface, the wave height at some location and time must be dependent upon wind fields in existence there at previous times and upon swell propagated there from other regions. To study these relationships, significant wave height (SWH) measurements from the Geos-3 radar altimeter are used in conjunction with anemometer windspeed measurements from weather ships, L, C, and R. During the passage of large cyclonic disturbances near the fixed locations of these vessels in the North Atlantic in February 1976, distinct hysteresis profiles that characterize the sea's memory during generation and dissipation conditions are observed. Examples are given that demonstrate the influences of cyclone intensity, movement, velocity, and shape on the configuration of these profiles.

Parsons, C. L.↗

Marine decision aids from space

The article discusses satellite observation of marine environments via microwave sensors and visible/infrared measurements. Specific applications include the monitoring of physical oceanography, weather and climate, coastal processes, ice processes, and resource use management. Four types of information delivery systems are identified: direct-to-user, regional/local user, global modeling user, and research user modes. Current developments in the marine information system include onboard correlation of synthetic aperture radar images at 10 to 100 m resolutions, and the extraction of wave, ship, iceberg or areal feature information from the image or signal before correlation.

Nagler, R. G.↗

Refine your search to explore more results.