Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Remote Tooling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Challenges in predicting Greenland supraglacial lake drainages at the regional scale

A leading hypothesis for the mechanism of fast supraglacial lake drainages is that transient extensional stresses briefly allow crevassing in otherwise compressional ice flow regimes. Lake water can then hydrofracture a crevasse to the base of the ice sheet, and river inputs can maintain this connection as a moulin. If future ice sheet models are to accurately represent moulins, we must understand their formation processes, timescales, and locations. Here, we use remote-sensing velocity products to constrain the relationship between strain rates and lake drainages across ∼ 1600 ksq.m in Pâkitsoq, western Greenland, between 2002–2019. We find significantly more extensional background strain rates at moulins associated with fast-draining lakes than at slow-draining or non-draining lake moulins. We test whether moulins in more extensional background settings drain their lakes earlier, but we find insignificant correlation. To investigate the frequency at which strain-rate transients are associated with fast lake drainage, we examined Landsat-derived strain rates over 16 and 32 d periods at moulins associated with 240 fast-lake-drainage events over 18 years. A low signal-to-noise ratio, the presence of water, and the multi-week repeat cycle obscured any resolution of the hypothesized transient strain rates. Our results support the hypothesis that transient strain rates drive fast lake drainages. However, the current generation of ice sheet velocity products, even when stacked across hundreds of fast lake drainages, cannot resolve these transients. Thus, observational progress in understanding lake drainage initiation will rely on field-based tools such as GPS networks and photogrammetry.

Kristin Poinar↗
DOE OSTI2018

Robotic Underwater Decontamination Services for Nuclear Applications-18464

Successful Underwater Robotic Decontamination Demonstrates Dose-Saving And Outage-Shortening Technology Diakont successfully provided underwater robotic decontamination services on a North American nuclear power plant's refueling cavity and dryer-separator pool in Spring 2017 using a new tool system. Historically, nuclear plant operators have conducted cleaning and decontamination of these surfaces manually, after draining water from the space. However manual decontamination is slow, and can result in excessive personnel dose exposure. The underwater robotic decontamination services present a vast improvement over manual decontamination because it reduces personnel dose exposure, reduces radwaste, doesn't impact plant chemistry, and doesn't risk inadvertently spreading contamination. Also the new decontamination method avoids the risk of personnel injury and component damage associated with hydrolasing. And by performing the decontamination robotically while the cavities are flooded, in many cases the critical path outage schedule can be shortened. Able to decontaminate horizontal, vertical, and curved surfaces, the decontamination tools easily navigate to areas within flooded cavities that are inaccessible to previous solutions, performing decontamination in parallel to other activities including fuel movement. Also, unlike other legacy solutions, the new tools do not require continuous use of an overhead crane or other method of suspension while performing the decontamination activities. The ROV-type decontamination tool attaches and drives along the cavity and component surfaces using a high-force, no-flow vortex generator, even in the presence of Residual Heat Removal (RHR) or shutdown cooling flow. Efficient, effective cleaning is performed using a rugged brushing action to detach the crud, while vacuuming it away at high flow rates to a submerged filter. At the Spring 2017 refueling outage, the decontamination services with the new methodology were so effective that no additional manual cavity decontamination was required after drain-down. Using the tool's ability to swim, attach, and crawl, field technicians decontaminated the majority of the surfaces designated by the plant operator. Preliminary surveys indicated that all contamination levels were reduced to <50 K dpm/100 cm{sup 2}, helping the utility meet their INPO/Industry collective radiation exposure goals. The new cleaning and decontamination services are ideal for servicing various underwater areas within nuclear power plants such as refueling cavities, BWR-6 drywell heads, spent fuel pools, cask loading pools and fuel transfer canals. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1997

Application-Controlled Demand Paging for Out-of-Core Visualization

In the area of scientific visualization, input data sets are often very large. In visualization of Computational Fluid Dynamics (CFD) in particular, input data sets today can surpass 100 Gbytes, and are expected to scale with the ability of supercomputers to generate them. Some visualization tools already partition large data sets into segments, and load appropriate segments as they are needed. However, this does not remove the problem for two reasons: 1) there are data sets for which even the individual segments are too large for the largest graphics workstations, 2) many practitioners do not have access to workstations with the memory capacity required to load even a segment, especially since the state-of-the-art visualization tools tend to be developed by researchers with much more powerful machines. When the size of the data that must be accessed is larger than the size of memory, some form of virtual memory is simply required. This may be by segmentation, paging, or by paged segments. In this paper we demonstrate that complete reliance on operating system virtual memory for out-of-core visualization leads to poor performance. We then describe a paged segment system that we have implemented, and explore the principles of memory management that can be employed by the application for out-of-core visualization. We show that application control over some of these can significantly improve performance. We show that sparse traversal can be exploited by loading only those data actually required. We show also that application control over data loading can be exploited by 1) loading data from alternative storage format (in particular 3-dimensional data stored in sub-cubes), 2) controlling the page size. Both of these techniques effectively reduce the total memory required by visualization at run-time. We also describe experiments we have done on remote out-of-core visualization (when pages are read by demand from remote disk) whose results are promising.

Cox, Michael↗
NASA NTRS2008

Adsorption of Water on JSC-1A Lunar Simulant Samples

Remote sensing probes sent to the moon in the 1990s indicated that water may exist in areas such as the bottoms of deep, permanently shadowed craters at the lunar poles, buried under regolith. Water is of paramount importance for any lunar exploration and colonization project which would require self-sustainable systems. Therefore, investigating the interaction of water with lunar regolith is pertinent to future exploration. The lunar environment can be approximated in ultra-high vacuum systems such as those used in thermal desorption spectroscopy (TDS). Questions about water dissociation, surface wetting, degree of crystallization, details of water-ice transitions, and cluster formation kinetics can be addressed by TDS. Lunar regolith specimens collected during the Apollo missions are still available though precious, so testing with simulant is required before applying to use lunar regolith samples. Hence, we used for these studies JSC-1a, mostly an aluminosilicate glass and basaltic material containing substantial amounts of plagioclase, some olivine and traces of other minerals. Objectives of this project include: 1) Manufacturing samples using as little raw material as possible, allowing the use of surface chemistry and kinetics tools to determine the feasibility of parallel studies on regolith, and 2) Characterizing the adsorption kinetics of water on the regolith simulant. This has implications for the probability of finding water on the moon and, if present, for recovery techniques. For condensed water films, complex TDS data were obtained containing multiple features, which are related to subtle rearrangements of the water adlayer. Results from JSC-1a TDS studies indicate: 1) Water dissociation on JSC-1a at low exposures, with features detected at temperatures as high as 450 K and 2) The formation of 3D water clusters and a rather porous condensed water film. It appears plausible that the sub- m sized particles act as nucleation centers.

Goering, John↗
NASA NTRSDate not supplied

A Multi-Faceted Approach to Demonstrating Multi-Functional Integrated Medical Devices to Advance Earth-Independent Medical Operations

INTRODUCTION TO MIM DEVICES Multi-functional Integrated Medical (MIM) devices conveniently incorporate multiple medical system capabilities within one device. The NASA Exploration Medical Integrated Product Team (XM-IPT) sponsored a market survey and trade study which identified the Tempus ProTM and the LifeBot 10® as the MIM devices that best met the evaluation criteria of the trade study. The Tempus ProTM (Remote Diagnostic Technologies, Ltd., Philips Corp., Farnborough, UK) and LifeBot 10® (LifeBot Health, Chicago, IL) both provide vital sign measurements such as blood pressure, electrocardiograms, heart rate, end tidal CO2, respiration rate, pulse oximetry and temperature along with ultrasound imaging. A video laryngoscopy capability is unique to the Tempus ProTM, while the LifeBot 10® supports connectivity with a digital stethoscope, otoscope, eye exam camera, and dermatoscope. Both devices include procedural guidance capabilities and have various data transmission and report generation features. TECHNOLOGY DEMONSTRATIONS NASA’s exploration-class missions will have severe resource constraints, long return trip durations, significant communication delays, and limited resupply opportunities. The medical systems of these missions will need to fit within an Earth-Independent Medical Operations (EIMO) construct. Key features of an EIMO medical system include: 1) technologies that support the prevention, diagnosis, and treatment of spaceflight medical events; 2) components that meet mass, volume, power and crew time/training constraints; 3) consideration of the medical skill level of the astronaut caregiver; 4) collection, storage and analysis of medical data within a central data architecture; and 5) incorporation of appropriate guidance and support tools that allow crew autonomy. Evaluations are underway to determine if it will be beneficial to include MIM devices within exploration medical systems by conducting a series of planned technical demonstrations. Exploration Atmosphere Chamber studies are being performed to determine MIM functionality in a high oxygen concentration atmosphere. A side-by-side comparison of the Tempus ProTM and LifeBot 10® will be performed during ground-based demonstrations. Use of the MIM devices within an EIMO medical scenario simulation will be practiced during ground-based demonstrations in preparation for International Space Station (ISS) demonstrations of the MIM device. These various demonstrations are designed to gather evidence for or against the inclusion of MIM devices within an EIMO medical system. EXPECTED DEMONSTRATION OUTCOMES Information will be gained about the feasibility, benefits, and challenges of using a multifunctional, all-in-one, medical device for medical diagnosis. Information will also be collected about performance differences as available ground support decreases. Gaining this understanding will allow for further development of exploration medical system capabilities, which take the EIMO construct into consideration.

B. E. Lewandowski↗
DOE OSTI2021

A Multi-Site Networked Hardware-in-Loop Platform for Evaluation of Interoperability and Distributed Intelligence at Grid-Edge

Electric power systems have experienced large increases in the number of intelligent, connected and controllable devices being deployed, leading to a high degree of distributed intelligence at the grid-edge. These devices, both utility-owned and consumer-owned, include but are not limited to: renewable generation sources, energy storage, remote switches, voltage regulators, and smart controllable loads such as electric vehicles. These new devices provide significant potential for increased operational flexibility that can be leveraged to achieve system reconfiguration, resiliency improvements, power quality improvements, and distribution system automation. However, there are two significant challenges that must be addressed before these assets can be leveraged for operations: interoperability and system level validation prior to deployment. Because of the complexity of distributed control systems, and their interactions with legacy centralized controls, a purely simulations-based approach for pre-deployment validation is not sufficient. It requires hardware-in-loop testing to emulate the operational hardware devices and evaluate their performance. Additionally, securely integrating multiple test facilities at utility operators and vendors might enable rapid scale-up of evaluation platforms, and remove the need for multiple expensive standalone installations. Presented in this paper, is the development of a multi-site evaluation platform that employs Advanced Distribution Management Systems (ADMS), distributed control devices, real-time hardware-in-loop assets, secure communication links, and protocol adapters. This platform uses standards-based approaches and open-source tools, and hence can serve as a template for other researchers and institutions to implement their multi-site evaluation frameworks for pre-deployment testing.

Essakiappan, Somasundaram↗
DOE OSTI2021

Development of a Random-Forest Cloud-Regime Classification Model Based on Surface Radiation and Cloud Products

Various methods have been developed to characterize cloud type, otherwise referred to as cloud regime. These include manual sky observations, combining radiative and cloud vertical properties observed from satellite, surface-based remote sensing, and digital processing of sky imagers. While each method has inherent advantages and disadvantages, none of these cloud-typing methods actually includes measurements of surface shortwave or longwave radiative fluxes. Here, a method that relies upon detailed, surface-based radiation and cloud measurements and derived data products to train a random-forest machine-learning cloud classification model is introduced. Measurements from five years of data from the ARM Southern Great Plains site were compiled to train and independently evaluate the model classification performance. A cloud-type accuracy of approximately 80% using the random-forest classifier reveals that the model is well suited to predict climatological cloud properties. Furthermore, an analysis of the cloud-type misclassifications is performed. While physical cloud types may be misreported, the shortwave radiative signatures are similar between misclassified cloud types. From this, we assert that the cloud-regime model has the capacity to successfully differentiate clouds with comparable cloud–radiative interactions. Therefore, we conclude that the model can provide useful cloud-property information for fundamental cloud studies, inform renewable energy studies, and be a tool for numerical model evaluation and parameterization improvement, among many other applications.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1994

The reflection for dense plant canopies from the one-angle radiative transfer equation

An essential component of remote sensing of vegetation canopies from satellites is fundamental understanding. Since passive remote is driven by photons, the modeling of photon interactions with vegetation is a basic building block in that understanding. Several such photon transport models have been developed during the past two decades and continue to be developed. Different approaches have been followed including monte carlo, radiosity methods, geometric shadowing, and radiative transfer. In general, each approach has application for canopies with specific attributes. This presentation concerns the application of radiative transfer to dense vegetation canopies in which the soil does not participate. The approach taken here is novel in that a consistent theory for photon transport for non-rotationally invariant leaf scattering is developed in a canopy with a general leaf angle distribution (LAD). The theory is limited to the one-angle approximation (azimuthally averaged radiance) and is based on Chandrasekhar's analytical theory. While such a model is admittedly only approximate, it does fulfill a unique function in our search for understanding. In particular, the model is simple in its construct yet contains the essential features of canopy architecture that are mainly responsible for observed responses. Thus, this model will not only be a predictive tool but also an educational one. The mathematical setting is the radiative transfer equation in a dense (semiinfinite) canopy. The leaf scattering phase function is assumed to be Lambertian with different reflectance and transmittance. In addition, abaxial and adaxial differentiation is allowed which effectively destroys optical reciprocity. The analytical solution for the canopy BRDF is obtained by manipulation of the integral transport equation (a la Chandrasekhar) for a general LAD. With discretization of the. leaf angle, the resulting set of integral equations are solved iteratively including an acceleration procedure when the single scatter albedo is near one (in the NIR). Results will be compared to the LARS soybean canopy radiances as well as to broadleaf results from a recent Ames experiment.

Ganapol, B. D.↗
DOE OSTI2021

Building Intelligent Cyberinfrastructure to Learn Iteratively from both Observations and Models for Understanding Watershed Dynamics

Focal Area(s): Predictive modeling through the use of AI techniques and AI-derived model components; the use of AI and other tools to design a prediction system comprising of a hierarchy of models (e.g., AI-driven model/component/parameterization selection). Science Challenge: Watershed processes, such as the fate and transport of sediment, carbon and nutrients across landscapes and their fluxes to water bodies (e.g., streams, rivers and lakes), have important implications for global and regional carbon and nutrient dynamics, biogeochemical functioning of terrestrial ecosystems, and soil functions. The magnitude of lateral surface/subsurface transport and fluxes of sediment, carbon and nutrients are key factors controlling the vulnerability of watersheds to climate extremes such as droughts, wildfires, and floods. Recent field observations and other scientific evidence suggest that the magnitudes of lateral transport and fluxes of sediment, carbon and nutrients are governed primarily by the spatial and vertical heterogeneity of landscape and soil properties and by pedogenic processes. However, the current generation of land surface and watershed models do not mechanistically couple the terrestrial and hydrologic systems, nor do they represent sufficiently the spatial and vertical heterogeneity of land surface and subsurface properties. On the other hand, increasing complexity of coupled watershed and land surface models requires more data to parameterize, calibrate and validate. Remote sensing (RS) provides a means to acquire spatial data and characterize their heterogeneity at the watershed scale, overcoming a major limitation associated with conventional point measurements. To improve the representation of land-surface and surface/subsurface process coupling and sub-grid heterogeneity in watershed models, it is essential to build our predictive understanding by learning from both the multi-scale multi-process modeling and diverse multi-scale data while leveraging powerful artificial intelligence (AI) techniques.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2025

Hilo Bay Water Resources: Monitoring Water Quality in Hilo Bay, Hawaii to Support Future Community Planning

Designated as an impaired body of water by both state and federal water quality standards, Hilo Bay, Hawaiʻi is highly susceptible to brown water, a condition where the water becomes murky and is associated with excess levels of bacteria, contaminants, and nutrients. A breakwater in Hilo Bay, which was established to protect Hilo town from tsunamis, interferes with water circulation and prolongs the presence of brown water in the bay. The State of Hawaiʻi issues brown water advisories (BWAs) following flash flood warnings, sewage spills, and other events to indicate a public health concern for those who use Hilo Bay for recreation, cultural purposes, and fishing. Due to the elevated public health risk and ecosystem disturbance that brown water poses to Hilo Bay, we partnered with the Hawaiʻi County Office of Sustainability, Climate, Equity, and Resilience (OSCER) to examine the feasibility of using Earth observations (EO) to monitor water quality in the Hilo Bay region. We leveraged data from Sentinel-2 Multispectral Instrument (MSI), Landsat 8 Operational Land Imager (OLI), Landsat 9 OLI-2, and Aqua and Terra Moderate Resolution Imagine Spectroradiometer (MODIS) instruments to identify and assess spatial and temporal patterns of two main water quality parameters, turbidity and chlorophyll-a, during BWAs. We used the Optical Reef and Coastal Area Assessment (ORCAA) tool in Google Earth Engine to process EO data and generate water quality maps and time series. Our study found that increased turbidity levels can be identified by EO data during BWAs. In addition, our map products indicated the presence of several turbidity plumes along the coast, with the highest concentration of turbidity found within Hilo Bay. While chlorophyll-a levels were relatively flat within our study region during BWAs, we found that regional chlorophyll-a patterns could be derived from MODIS chlorophyll-a data in NASA Worldview. Our study’s multi-sensor approach provided valuable insights for how water quality in the Hilo Bay region can be monitored in the future.

remote sensing↗
NASA NTRS2001

Enabling Advanced Automation in Spacecraft Operations with the Spacecraft Emergency Response System

True autonomy is the Holy Grail of spacecraft mission operations. The goal of launching a satellite and letting it manage itself throughout its useful life is a worthy one. With true autonomy, the cost of mission operations would be reduced to a negligible amount. Under full autonomy, any problems (no matter the severity or type) that may arise with the spacecraft would be handled without any human intervention via some combination of smart sensors, on-board intelligence, and/or smart automated ground system. Until the day that complete autonomy is practical and affordable to deploy, incremental steps of deploying ever-increasing levels of automation (computerization of once manual tasks) on the ground and on the spacecraft are gradually decreasing the cost of mission operations. For example, NASA's Goddard Space Flight Center (NASA-GSFC) has been flying spacecraft with low cost operations for several years. NASA-GSFC's SMEX (Small Explorer) and MIDEX (Middle Explorer) missions have effectively deployed significant amounts of automation to enable the missions to fly predominately in 'light-out' mode. Under light-out operations the ground system is run without human intervention. Various tools perform many of the tasks previously performed by the human operators. One of the major issues in reducing human staff in favor of automation is the perceived increased in risk of losing data, or even losing a spacecraft, because of anomalous conditions that may occur when there is no one in the control center. When things go wrong, missions deploying advanced automation need to be sure that anomalous conditions are detected and that key personal are notified in a timely manner so that on-call team members can react to those conditions. To ensure the health and safety of its lights-out missions, NASA-GSFC's Advanced Automation and Autonomy branch (Code 588) developed the Spacecraft Emergency Response System (SERS). The SERS is a Web-based collaborative environment that enables secure distributed fault and resource management. The SERS incorporates the use of intelligent agents, threaded discussions, workflow, database connectivity, and links to a variety of communications devices (e.g., two-way paging, PDA's, and Internet phones) via commercial gateways. When the SERS detects a problem, it notifies on-call team members, who then can remotely take any necessary actions to resolve the anomalies.The SERS goes well beyond a simple '911' system that sends out an error code to everyone with a pager. Instead, SERS' software agents send detailed data (i.e., notifications) to the most appropriate team members based on the type and severity of the anomaly and the skills of the on-call team members. The SERS also allows the team members to respond to the notifications from their wireless devices. This unique capability ensures rapid response since the team members no longer have to go to a PC or the control center for every anomalous event. Most importantly, the SERS enables safe experimentation with various techniques for increasing levels of automation, leading to robust autonomy. For the MIDEX missions at NASA GSFC, the SERS is used to provide 'human-in-the-loop' automation. During lights-out operations, as greater control is given to the MIDEX automated systems, the SERS can be configured to page remote personnel and keep them informed regarding actions taking place in the control center. Remote off-duty operators can even be given the option of enabling or inhibiting a specific automated response in near real time via their two-way pagers. The SERS facilitates insertion of new technology to increase automation, while maintaining the safety and security of mission resources. This paper will focus on SERS' overall functionality and how SERS has been designed to handle the monitoring and emergency response for missions with varying levels of automation. The paper will also convey some of the key lessons learned from SERS' deployment across of variety of missions, highlighting this incremental approach to achieving 'robust autonomy'.

Breed, Julie↗
NASA NTRS2006

The Need for High Spatial Resolution Multispectral Thermal Remote Sensing Data In Urban Heat Island Research

Although the study of the Urban Heat Island (UHI) effect dates back to the early 1800's when Luke Howard discovered London s heat island, it has only been with the advent of thermal remote sensing systems that the extent, characteristics, and impacts of the UHI have become to be understood. Analysis of the UHI effect is important because above all, this phenomenon can directly influence the health and welfare of urban residents. For example, in 1995, over 700 people died in Chicago due to heat-related causes. UHI s are characterized by increased temperature in comparison to rural areas and mortality rates during a heat wave increase exponentially with the maximum temperature, an effect that is exacerbated by the UHI. Aside from the direct impacts of the UHI on temperature, UHI s can produce secondary effects on local meteorology, including altering local wind patterns, increased development of clouds and fog, and increasing rates of precipitation either over, or downwind, of cities. Because of the extreme heterogeneity of the urban surface, in combination with the sprawl associated with urban growth, thermal infrared (TIR) remote sensing data have become of significant importance in understanding how land cover and land use characteristics affect the development and intensification of the UHI. TIR satellite data have been used extensively to analyze the surface temperature regimes of cities to help observe and measure the impacts of surface temperatures across the urban landscape. However, the spatial scales at which satellite TIR data are collected are for the most part, coarse, with the finest readily available TIR data collected by the Landsat ETM+ sensor at 60m spatial resolution. For many years, we have collected high spatial resolution (10m) data using an airborne multispectral TIR sensor over a number of cities across the United States. These high resolution data have been used to develop an understanding of how discrete surfaces across the urban environment (e.g., rooftops, pavements) interact from a surface-lower atmosphere energy flux perspective, to force the development of the UHI. Moreover, the airborne TIR sensor we used in our UHI studies was a multispectral sensor that had six channels in the 8-12pm range. The advantages of collecting multispectral TIR data became readily evident as a valuable tool for better calculation of unique surface thermal energy responses for urban materials over the 8-12 micrometer region, and also for getting a better handle on surface emissivity characteristics for these discrete surfaces. In this presentation, we will provide evidence on the virtues of how high spatial resolution multispectral TIR data can provide for better analysis of the UHI that cannot now be attained via TIR data obtained from satellites. Furthermore, we wish to provide compelling evidence on why future TIR satellite sensors should collect data at fine spatial resolutions (e.g. less than or equal to 30m) to better allow for measurement of surface thermal energy fluxes from discrete urban surfaces, and to better understand how surface fluxes from different urban materials in cities around the world in different climatic regimes, affect development of the UHI characteristics.

Quattrochi, Dale A.↗
NASA NTRS2010

Application of Satellite Observations to Manage Natural Disasters in the Lake Victoria Basin

Lake Victoria, the second largest fresh water lake in the Eastern part of Africa is a vital natural resource for the economic well being and prosperity of over 30 million people located in riparian regions of Uganda, Kenya and Tanzania. It covers a large area of about 68,870 km2 and produces a GDP of about US $30 billion per year. The region is also very much prone to natural disasters such as severe floods during heavy precipitation periods in the Eastern part of Africa. In addition to floods, the precipitation also produces large infestations of mosquito larvae due to the standing water in many areas. This further causes multiple vector borne diseases such as Malaria, Rift Valley Fever and more. These problems are of serious concern and require active and aggressive surveillance and management to minimize the loss of human and animal lives and property damage. Satellite imagery and observations along with the in situ measurements provide a great tool to analyze and study this area and inform the policy makers to make calculated policy decisions which are more beneficial to the environment. Recently, NASA and USAID have joined forces with the Regional Center for Mapping of Resources for Development (RCMRD) located in Nairobi, Kenya to utilize multiple NASA sensors such as TRMM, SRTM and MODIS to develop flood potential maps for the Lake Victoria Basin. The idea is to generate a flood forecasts and "nowcasts" that can be sent to the disaster management organizations of Uganda, Kenya, and Tanzania. Post flood event satellite imagery is becoming a common tool to assess the areas inundated by flooding. However, this work is unique undertaking by utilizing land imaging and atmospheric satellites to build credible flood potential maps. At same time, we are also studying the potential occurrence and spread of Rift Valley Fever disease based on the short term climate records and precipitation data. These activities require multi-nation coordination and agreements and multiple operational agencies within each respective country. It also requires credible in situ data such as precipitation, river flow rates and lake levels to further validate the global and regional Hood models and algorithms. This also requires a considerable amount of training and capacity building for the RCMRD experts who will help us validate the model results and eventually transition it for operational use. In a final analysis, Disaster management and humanitarian aid organizations need accurate and timely information for making decisions regarding deployment of relief teams and emergency supplies during major floods. Flood maps based on the use of satellite data have proven extremely valuable to such organizations for identifying the location, extent, and severity of these events. However, despite extraordinary efforts on the part of remote sensing data providers to rapidly deliver such maps, there is typically a delay of several days or even weeks from the on-set of flooding until such maps are available to the disaster management community. This paper summarizes efforts at NASA to address this problem through development of an integrated and automated process of a) flood forecasting b) flood detection, c) satellite data acquisition, d) rapid Hood mapping and distribution, and e) validation of Hood forecasting and detection products.

Habib, Shahid↗
NASA NTRSDate not supplied

Analyzing the Impact of Canadian Wildfires on Air Quality in the U.S. Mid-Atlantic: with Data and Tools from NASA’s Atmospheric Sciences Data Center

Wildfires pose a growing concern in North America due to their harmful impacts on air quality and public health, with increased wildfire activity in recent years leading to widespread smoke plumes that can transcend borders. The exposure of New York City (NYC), the most populous city in North America, to Canadian wildfire smoke highlights the substantial implications for public health and urban environments. To better understand the impact of Canadian wildfires on air quality in NYC, satellite data from the NASA Atmospheric Science Data Center (ASDC) at Langley Research Center, along with ground-based measurements and atmospheric modeling results, are analyzed. We examine concentrations of atmospheric aerosols—particularly PM2.5 particulate matter originating from Canadian wildfires—their dispersion patterns, and the duration and intensity of smoke events impacting NYC. Data from multiple satellites, such as those from the Earth Polychromatic Imaging Camera (EPIC), are synergistically used to identify regions affected by wildfires and estimate aerosol loading. Ground-based measurements, including data from air quality monitoring stations, provide localized information for validation and calibration purposes. The findings of this study contribute to our understanding of the impact of Canadian wildfires on NYC's air quality and emphasize the importance of monitoring and prediction of transboundary smoke events using data synthesized from multiple sources, such as those provided by the ASDC. This information is crucial for policymakers, public health officials, and residents in affected areas to develop effective strategies for mitigating the health risks associated with wildfire smoke and improving air quality during wildfire seasons. The utilization of ASDC data in this research highlights the critical role of atmospheric remote sensing in addressing the challenges posed by wildfires and their consequences on regional scales.

Ingrid Garcia-Solera↗
DOE OSTI2015

Wintering Golden Eagles on the coastal plain of South Carolina

Golden Eagles (Aquila chrysaetos) are rare winter residents in eastern North America, with most found along the Appalachian Mountains and few reported on the coastal plain of the Carolinas. We used remote cameras baited with wild pig (Sus scrofa) and white-tailed deer (Odocoileus virginianus) carcasses to detect, age, and individually identify Golden Eagles on the U.S. Department of Energy’s Savannah River Site on the coastal plain of South Carolina. We identified eight individual Golden Eagles during the winters of 2013–2014 and 2014–2015, with one detected during both winters. We detected eagles for 19 and 66 calendar days during the winters of 2013–2014 and 2014–2015, respectively, with two adult eagles detected for 30 and 31 calendar days in 2014–2015. Eagles typically scavenged on carcasses for a few days, left, and then returned when cameras were baited with another carcass, suggesting they had remained in the area. These observations suggest that large tracts of forests on the coastal plain may be important wintering areas for some Golden Eagles and, further, that other areas in the coastal plain of the southeastern United States may also harbor wintering eagles. Identification of wintering areas of Golden Eagles in the east will be an important step in the conservation of this protected species, and camera traps baited with carcasses can be an effective tool for such work.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Abiotic proxies for predictive mapping of nearshore benthic assemblages: implications for marine spatial planning

Marine spatial planning (MSP) should assist managers in guiding human activities toward sustainable practices and in minimizing user conflicts in our oceans. A necessary first step is to quantify spatial patterns of marine assemblages in order to understand the ecosystem's structure, function, and services. However, the large spatial scale, high economic value, and density of human activities in nearshore habitats often makes quantifying this component of marine ecosystems especially daunting. To address this challenge, we developed an assessment method that employs abiotic proxies to rapidly characterize marine assemblages in nearshore benthic environments with relatively high resolution. We evaluated this assessment method along 300 km of the State of Maine's coastal shelf (<100 m depth), a zone where high densities of buoyed lobster traps typically preclude extensive surveys by towed sampling gear (i.e., otter trawls). During the summer months of 2010–2013, we implemented a stratified-random survey using a small remotely operated vehicle that allowed us to work around lobster buoys and to quantify all benthic megafauna to species. Stratifying by substrate, depth, and coastal water masses, we found that abiotic variables explained a significant portion of variance (37–59%) in benthic species composition, diversity, biomass, and economic value. Generally, the density, diversity, and biomass of assemblages significantly increased with the substrate complexity (i.e., from sand-mud to ledge). The diversity, biomass, and economic value of assemblages also decreased significantly with increasing depth. Last, demersal fish densities, sessile invertebrate densities, species diversity, and assemblage biomass increased from east to west, while the abundance of mobile invertebrates and economic value decreased, corresponding mainly to the contrasting water mass characteristics of the Maine Coastal Current system (i.e., summertime current direction, speed, and temperature). Integrating modeled predictions with existing GIS layers for abiotic conditions allowed us to scale up important assemblage attributes to define key foundational ecological principles of MSP and to find priority regions where some bottom-disturbing activities would have minimal impact to benthic assemblages. We conclude that abiotic proxies can be strong forcing functions for the assembly of marine communities and therefore useful tools for spatial extrapolations of marine assemblages in congested (heavily used) nearshore habitats.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

SV-Sim: Scalable PGAS-based State Vector Simulation of Quantum Circuits

High-performance quantum circuit simulation in a classic HPC is still imperative in the NISQ era. Observing that the major obstacle of scalable state-vector quantum simulation arises from the massively fine-grained irregular data-exchange with remote nodes, in this paper we present SV-Sim to apply the emerging PGAS-based communication models (i.e., direct peer access for intra-node CPUs/GPUs and SHMEM for inter-node CPU/GPU clusters) for efficient scalable quantum circuit simulation. Through an orchestrated device functional pointer design, SV-Sim is able to abstract the quantum gate sets across various heterogeneous backends, including IBM/Intel/AMD CPUs, NVIDIA /AMD GPUs, and Intel MIC, in a unified framework, but still asserting outstanding performance and tractable interface to higher-level quantum programming environments, such as IBM Qiskit, Microsoft Q\# and Google Cirq. Circumventing the disability of polymorphism in GPUs and leveraging the device-initiated one-sided communication, SV-Sim can process dynamically synthesized quantum circuit in a single GPU/CPU kernel without the need of expensive JIT or runtime branching, significantly improving the performance and simplifying the programming complexity for the emerging variational quantum algorithms. Evaluations on NVIDIA A100-DGX-1, V100-DGX-2, AMD MI100, ALCF Theta, and OLCF Summit HPCs show that SV-Sim can delivery scalable performance on various state-of-the-art HPC platforms, offering a useful tool for quantum algorithm validation and verification.

Li, Ang↗
NASA NTRS1993

Extraction of auxiliary data from AVIRIS distribution tape for spectral, radiometric, and geometric quality assessment

Remotely sensed data are affected by system (sensor and platform), and scene related effects. For quantitative investigations the spectral, radiometric characteristics of the system and scene have to be known. The relevant effects and their possible influence on an image have to be specifically determined for every remote sensing system and adequate description parameters need to be updated and reported on a regular basis as they are carried out, e.g., for the AVIRIS system. It is evident that the strength of the influence of similar effects in very dependent on the accessibility of auxiliary information about such sensor systems. Degradation in a spaceborne system can normally be just reported and cannot be corrected. In contrast, an airborne sensor can be evaluated, maintained and improved periodically. Such maintenance efforts are particularly important because airborne systems are exposed to extreme and changing environments. These include tens of takeoffs and landing each year as well as extreme changes in temperature and humidity on the tarmac and in flight. For the AVIRIS system there are environmental stresses such as changes in temperature, air pressure, humidity, vibration of the platform or scene-related reasons like atmospheric conditions, and topography. The information contained in the auxiliary files included with the AVIRIS data can be used to assess these effects and compensate for them. In addition the spectral, radiometer and geometric calibration data contained in the auxiliary file are required for quantitative analysis of the data. The paper describes tools to access the auxiliary information that characterizes the AVIRIS system. These tools allow the examination of parameters that may impact the quality of the measured AVIRIS image. An example of the use of this auxiliary data was carried out with regard to a parametric geocoding approach. Emphasis is placed on the reported auxiliary information that describes the geometric character of the AVIRIS data in 1991. Results are presented using data from the AVIRIS flight #910705, run 6 and 7 of the NASA MAC Europe 1991 campaign in a test site in Central Switzerland.

Meyer, Peter↗

Refine your search to explore more results.