Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REGENERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Electrospun protein-CNT composite fibers and the application in fibroblast stimulation

Functional biopolymer scaffolds are in high demand for tissue regeneration. In this study, we incorporated functionalized CNT in collagen or silk protein solution to generate biocomposite fibers by electrospinning. The addition of CNT reinforced the strength of the scaffolds and rendered the fibers electrical conductivity to not only facilitate the E-spun fiber formation but also grant the fibers an additional functionality that can be utilized for cell stimulation. Considering fiber dimension, alignment, mechanical strength, electrical conductivity and biocompatibility, silk-CNT fibers containing a minute amount of CNT (0.05%) outperformed other fiber types. The modulation effect of these fibers was examined by their application in inducing polarization and activation of fibroblasts with cellular deficit. While the fibroblasts on both collagen-CNT and silk-CNT fibers synthesized a substantially higher level of collagen type III (COLIII) than cells on pure protein fibers to reduce the abnormally high COLI/COLIII ratio, electrical stimulation boosted the collagen productivity by 20 folds in cells on silk-CNT than on collagen-CNT due to silk-CNT's high electrical conductivity. The developed approach can be potentially utilized to remedy the dysfunctional fibroblasts for therapeutic treatment of diseases and health conditions associated with collagen disorder.

60 APPLIED LIFE SCIENCES↗

Berberine derivative, Q8, stimulates osteogenic differentiation

Highlights: • Q8 increases BMP4-induced osteoblast differentiation of C2C12 cells. • Q8 induced β-catenin nuclear accumulation by enhancing GSK3β phosphorylation via inactivation of PPARγ. • Q8 ameliorated the inhibitory effects of rosiglitazone during osteoblast differentiation. Berberine has been implicated to be involved in maintaining bone health due to its anti-oxidative and osteogenic properties. However, low potency and low bioavailability limit the clinical development of the drug. To overcome these obstacles, we previously synthesized a compound, Q8, which is a structural homolog of berberine. The present study examined the pharmacological functions of Q8 to evaluate its potential use in bone regeneration with respect to osteoblast differentiation. Here, we report that Q8 enhanced BMP4-induced alkaline phosphatase (ALP) activity and transcription from the ALP promoter. In addition, Q8 suppressed the expression and activity of PPARγ (a known negative regulator of osteogenesis due to its stimulatory effects on adipogenesis and its role as an adipogenic transcription factor), which in turn increases β-catenin expression in the nucleus, and ultimately promotes osteoblast differentiation. Meanwhile, Q8 reversed the inhibitory effects of the PPARγ agonist, rosiglitazone, on osteoblast differentiation. This study demonstrated that Q8 promotes osteoblast differentiation via inhibition of PPARγ and the enhancement of osteoblast function by Q8 may contribute to the prevention for osteoporosis.

60 APPLIED LIFE SCIENCES↗

Roles of SDF-1/CXCR4 axis in cartilage endplate stem cells mediated promotion of nucleus pulposus cells proliferation

Highlights: • NPCs proliferation was promoted by co-cultured CESCs and CESCs-CM in vitro. • SDF-1 and CXCR4 were expressed in a complementary pattern in CESCs and NPCs. • CESCs promoted NPCs proliferation partially via SDF-1/CXCR4 axis. • SDF-1/CXCR4 axis mainly activated ERK1/2 pathway rather than Akt pathway in NPCs. • CESCs upregulated TIMP1 expression in NPCs in a SDF-1/CXCR4 axis independent manner. Stem cells transplantation has shown considerable promise in intervertebral disc repair and low-back pain release. Cartilage endplate stem cells (CESCs) also showed potential for nucleus pulposus (NP) regeneration in a rabbit disc degeneration model, the precise mechanism was unclear. Here we investigated the effects of CESCs on NP cells (NPCs) proliferation and the mechanism in vitro. CESCs and NPCs were isolated from surgical specimens of degenerative human lumbar disc. NPCs were co-cultured with CESCs at a 1:1 ratio or cultured in CESCs conditioned medium (CESCs-CM). NPCs proliferation was evaluated by Ki-67 staining, CCK-8 assay and cell cycle analysis. Gene expressions were detected by qRT-PCR and activation of Akt and ERK1/2 was detected by western blot. CXCR4 antagonist AMD3100 was used to block SDF-1/CXCR4 axis. ERK1/2 and Akt inhibitors were used to block Akt and ERK1/2 activation. Results showed that NPCs proliferation was promoted by direct-contact co-culturing with CESCs as well as culturing in CESCs-CM. SDF-1 expression level in CESCs was significantly higher than that in NPCs, while CXCR4 was the opposite. Promotion of NPCs proliferation mediated by CESCs-CM could be partially attenuated by AMD3100. CESCs-CM activated both Akt and ERK1/2 in NPCs, while rhSDF-1 scarcely activated Akt but obviously activated ERK1/2. Akt and ERK1/2 inhibitors could partially inhibited CESCs-CM mediated promotion of NPCs proliferation and showed cumulative effect, while ERK1/2 inhibitor and AMD3100 could significantly abrogate SDF-1 mediated promotion of NPCs proliferation. Our results suggested that CESCs might promote NPCs proliferation in a paracrine pathway, which was partially mediated by SDF-1/CXCR4 axis via ERK1/2 signaling transduction pathway.

60 APPLIED LIFE SCIENCES↗

Co-processing catalytic fast pyrolysis oil in an FCC reactor

Here, studies of co-processing catalytic fast pyrolysis (CFP) oil with vacuum gas oil (VGO) are conducted in a Davison Circulating Riser (DCR). The CFP oil (CFPO) for this study was produced by upgrading fast-pyrolysis vapors from pine in an ex-situ fixed-bed reactor. CFPOs were co-processed at up to a volume fraction of 0.05 with VGO at 521 degrees C and 257 kPa. The yields of oil, aqueous phase, tail gas, and coke were measured. The amount of coke was determined from the carbon containing components in the regenerator flue gas. A compositional analysis was conducted with gas chromatography and elemental analyzers. The organic liquids were distilled into gasoline, jet-fuel, diesel, and resid fractions. A biocarbon analysis was conducted on the organic phase and its individual boiling-point fractions. The results show a small decrease in liquid yield and a generally increased gas yield when co-processing CFPO with VGO. The experiments showed that 75%-100% of biocarbon is incorporated into liquid fuels relative to fossil carbon, depending on catalyst and CFPO. The measurements indicate that cracked CFPO components are predominantly included in the jet-fuel and diesel fractions. A techno-economic analysis (TEA) estimated the minimum fuel selling price (MSFP) for fuel-range products derived from FCC co-processing of CFPO at 24 to 29 $\$$/GJ ($\$$2.90 to $\$$3.50 per gasoline-gallon equivalent; GGE) at a yield of 4.87-7.14 GJ/t(biomass) or 40-58 GGE/t.

09 BIOMASS FUELS↗

Utilization of guaiacol-based deep eutectic solvent for achieving a sustainable biorefinery

This study proposed a renewable deep eutectic solvent (DES) pretreatment using lignin-derived guaiacol as the hydrogen bond donor. The DES showed excellent biomass fractionation efficiency after the incorporation of trace AlCl 3 as the reinforcer, which removed 79.1 % lignin while preserving more than 90 % glucan. The pretreated bamboo exhibited 96.2 % glucan enzymatic hydrolysis yield at only 110 °C. The physicochemical properties of the pretreated solids were comprehensively investigated to explain how the DES fractionation overcame the biomass recalcitrance. The regenerated lignin from the DES pretreatment was also analyzed, which revealed that lignin β-O-4 bond was significantly cleaved. In conclusion, this guaiacol-based DES could greatly contribute to establish a closed-loop biorefinery sequence with high lignin fractionation efficiency and great solvent recyclability.

09 BIOMASS FUELS↗

High-level co-production of 3-hydroxypropionic acid and 1,3-propanediol from glycerol: Metabolic engineering and process optimization

3-Hydroxypropionic acid (3-HP) and 1,3-propanediol (1,3-PDO) are value-added chemicals with versatile applications in the chemical, pharmaceutical, and food industries. Nevertheless, sustainable production of 3-HP and 1,3-PDO is often limited by the lack of efficient strains and suitable fermentation configurations. We report attempts have been made to improve the co-production of both metabolites through metabolic engineering of Escherichia coli and process optimization. First, the 3-HP and 1,3-PDO co-biosynthetic pathways were recruited and optimized in E. coli, followed by coupling the pathways to the transhydrogenase-mediated cofactor regeneration systems that increased cofactor availability and product synthesis. Next, pathway rebalancing and block of by-product formation significantly improved 3-HP and 1,3-PDO net titer. Subsequently, glycerol flux toward 3-HP and 1,3-PDO synthesis was maximized by removing metabolic repression and fine-tuning the glycerol oxidation pathway. Lastly, the combined fermentation process optimization and two-stage pH-controlled fed-batch fermentation co-produced 140.50 g/L 3-HP and 1,3-PDO, with 0.85 mol/mol net yield.

1,3-propanediol↗

Effects of ion adsorption on graphene oxide films and interfacial water structure: A molecular-scale description

Herein we discuss graphene oxide as a promising, emerging separation material, as it is durable, dispersible in water, and has naturally forming functional groups. Bulk studies using graphene oxide flakes have demonstrated impressive metal adsorption. However, little interfacial information about water and metal organization near graphene oxide is available. A mechanistic understanding of water and ions interactions with graphene oxide films is critical toward advanced separations, including improved sorption efficiency and membrane regeneration. We study metal ion and local water organization near graphene oxide thin films formed at the air/water interface. These films are not typical membranes and allow us to determine nanoscale information about the graphene oxide-water interface. We accomplish this with x-ray reflectivity (XR), x-ray fluorescence near total reflection (XFNTR), and vibrational sum frequency generation spectroscopy (SFG). These interface-specific techniques provide the electron density profile normal to the interface, number of adsorbed ions, and information about the orientational ordering and hydrogen-bonding network of interfacial water, respectively. Via XFNTR and SFG, we find that trivalent yttrium ions preferentially adsorb to graphene oxide and affect its structure, compared to divalent strontium and monovalent cesium ions. Two different interfacial water populations can be described, based on their hydrogen bonding strength, and the adsorbed ions affect these populations differently. These results provide fundamental information about ion and water organization at the interface and help address the large computational-experimental agreement gap for graphene oxide systems. Additionally, they are relevant for improved soft-scaffold graphene oxide membranes and downstream applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of sulfur loading on the desulfation chemistry of a commercial lean NOx trap catalyst

We investigate the effects of initial sulfur loadings on the desulfation chemistry and the subsequent final activity of a commercial LNT catalyst. Identical total amounts of SO2 are applied to the samples, albeit with the frequency of desulfation varied. The results indicate that performance is better with less frequent desulfations. The greater the amount of sulfur deposited before desulfation, the more amount of SO2 evolution before H2S is observed during desulfation, which can be explained by two sequential reactions; initial conversion of sulfate to SO2, followed by the reduction of SO2 to H2S. After completing all sulfation/desulfation steps, the sample with only a single desulfation results in a fairly uniform sulfur distribution along the z-axis inside of the monolith. We expect that the results obtained in this study will provide useful information for optimizing regeneration strategies in vehicles that utilize the LNT technology.

Environmental Molecular Sciences Laboratory↗

Ketonization of levulinic acid and γ-valerolactone to hydrocarbon fuel precursors

We studied a new process for direct conversion of either levulinic acid (LA) or γ-valerolactone (GVL) to hydrocarbon fuel precursors. The process involves passing an aqueous solution of LA or GVL containing a reducing agent, such as ethylene glycol or formic acid, over a ketonization catalyst at 380–400 °C and atmospheric pressure to form a biphasic liquid product. The organic phase is significantly oligomerized and deoxygenated and comprises a complex mixture of open-chain alkanes and olefins, aromatics, and low concentrations of ketones, alcohols, ethers, and carboxylates or lactones. Carbon content in the aqueous phase decreases with decreasing feed rate; the aqueous phase can be reprocessed through the same catalyst to form additional organic oils to improve carbon yield. Catalysts are readily regenerated to restore initial activity. Furthermore, the process might be valuable in converting cellulosics to biorenewable gasoline, jet, and diesel fuels as a means to decrease petroleum use and decrease greenhouse gas emissions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determining the hydration energetics on carbon-supported Ru catalysts: An adsorption calorimetry and density functional theory study

Fundamental knowledge on the energetics at the interface between a water layer and a metal catalyst is essential so as to understand the roles that water can play in the synthesis, activation and regeneration of noble metal-based catalysts. Here, we report the direct measurement of the enthalpy of water adsorption (Δh ads ) on activated carbon (C) and activated C-supported Ru nanoparticles, which are promising catalyst as applied to the hydrogenation/hydrodeoxygenation (HDO) of oxygenates (phenolics, aldehydes, etc.). Specifically, the near-zero coverage enthalpy of water adsorption on a C-supported Ru catalyst is -75.3 ± 0.4 kJ/(mol water), suggesting favorable water–metal binding. This is much more exothermic than that on C, which has an enthalpy of adsorption of -50.3 ± 1.3 kJ/(mol water). Despite the favorable initial binding, the magnitudes of enthalpies of water condensation on C and Ru-C indicate that overall, their surfaces are both hydrophobic. Moreover, the experimentally-measured near-zero coverage water adsorption enthalpy at the Ru sites is in very good agreement with our density functional theory based calculations. At low coverages, we obtain a water binding energy of -61.7 kJ/(mol water), which increases to -78.1 kJ/(mol water) at saturation. Complementary results are also obtained from a thermal analysis, which employed a thermogravimetric analysis–differential scanning calorimetry–mass spectrometry (TG-DSC-MS), a spectroscopic investigation using ex situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and a morphological evaluation with transmission electron microscopy (TEM). We point out that in carbon-supported metal catalysts, such as Ru-C, a strong hydration at near-zero coverage and relative weak water-surface interactions occurs upon saturation. Such heterogeneity is essential and crucial for catalytic hydrogenation/HDO reactions that involve balanced interactions among the water-rich reactant mixture and nonpolar organic products.

09 BIOMASS FUELS↗

Seawater desalination by over-potential membrane capacitive deionization: Opportunities and hurdles

The salt removal capacity ( SRC ) of the carbon electrodes in membrane capacitive deionization (MCDI) is limited by the applied potential (<1.6 V). Thus, enhancement of the SRC is essential before applying MCDI to seawater desalination. This study aims at developing a novel MCDI system for seawater desalination by applying over-potential (OP) to enhance ion-adsorption capacity and kinetics, and by reversing the polarity (RP) of electrodes to improve ion-desorption kinetics (hereafter named OP-MCDI-RP) for seawater desalination. At 2.4 V, the OP-MCDI system with mesoporous carbon demonstrated a SRC value of 64.7 mg g –1 when desalting 0.5 M NaCl solution, while the OP-CDI system could only remove 8.2 mg g –1 under identical conditions. Similarly, an OP-MCDI cell using carbon aerogel demonstrated a greater SRC value of 43.4 mg g –1 in comparison with 12.5 mg g –1 achieved in OP-CDI. These results indicate that the OP-MCDI system can directly desalt high salinity water regardless of the electrode material. In contrast to the OP-MCDI system, the OP-MCDI-RP system yields a higher regeneration efficiency by applying a reversed low-voltage. It is shown that, under appropriate operating conditions, the OP-MCDI-RP system reduced the electrical conductivity of a seawater sample of 37 practical salinity units by 99.9%, suggesting that the OP-MCDI-RP system can be employed for seawater desalination. In conclusion, due to the dramatic increase in energy demand and insufficient long-term stability caused by high potential and high salt concentration, however, the OP-MCDI-RP process should be further investigated for potential practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pertechnetate (TcO 4 - ) sequestration from groundwater by cost-effective organoclays and granular activated carbon under oxic environmental conditions

Technetium-99 (Tc-99) is a major risk driver at nuclear power plants and several US Department of Energy (DOE) sites. Pertechnetate (TcO4-), the most common chemical form present in liquid nuclear waste and the environment, displays limited adsorption onto sediments, making it highly mobile and difficult to immobilize. In this work, inexpensive organoclays and granular activated carbon (GAC) were investigated for TcO(4)(- )sequestration from artificial groundwater (AGW). The Tc adsorption capacities were 15 mg/g for organoclays and 25 mg/g for GAC from pH 3-12 AGW under oxic conditions. Competitive NO3- at two orders of magnitude greater concentration than TcO4- reduced the Tc adsorption capacity by only 9-25%. In addition, the adsorbed Tc was effectively desorbed by KI, but not Na2SO4, and the regenerated sorbents retained their Tc removal capacity. X-ray absorption spectroscopy demonstrated that the Tc species bound to the organoclays and GAC was Tc(VII) (i.e., TcO4-), rather than Tc(IV). Thus, the inexpensive organoclays and GAC are highly effective at sequestering Tc-99 in its naturally existing TcO4- without requiring costly reductive systems, which may provide a practical solution for removing (TcO4-)-Tc-99 from environmental systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-situ hydrogenation of bio-oil/bio-oil phenolic compounds with secondary alcohols over a synthesized mesoporous Ni/CeO 2 catalyst

Mesoporous ceria, which was synthesized under supercritical conditions, was found to be an effective support material of Ni catalyst for the in-situ hydrogenation of m-cresol (a representative compound of bio-oil) using secondary alcohols of 2-propanol (2-PrOH) and 2-butanol (2-BuOH) as a hydrogen source (H-donor) to produce 3-methylcyclohexanol, 3-methylcyclohexene, and methylcyclohexane under a H2 gas-free atmosphere. The activities of different metal catalysts (Ni, Cu, and Co) for the in-situ hydrogenation of m-cresol were examined using 2-PrOH as a H-donor. Total and effective conversion of m-cresol achieved only over Ni/CeO 2 because of its fair catalytic properties, as determined by N2 adsorption-desorption, hydrogen temperature-programmed reduction, ammonia temperature-programmed desorption, X-ray diffraction, and transmission electron microscopy. The dependence of Ni/CeO2 performance on the reaction time (4-6 h) and Ni loading (3-9 wt%) was examined from the in-situ hydrogenation of m-cresol with 2-PrOH. The deactivation test of Ni/CeO 2 was performed by reusing the spent catalyst, which was then regenerated through successive oxidation and reduction, several times in the m-cresol transformation employing 2-PrOH as a H-donor. In addition to m-cresol, other phenolic model compounds of bio-oil, such as anisole, phenol, and guaiacol, were also treated by in-situ hydrogenation with 2-PrOH over Ni/CeO 2 . Although this catalyst was effective for phenol and guaiacol transformation, it was relatively ineffective for anisole conversion. The in-situ hydrogenation of crude bio-oil with 2-PrOH and 2-BuOH was accomplished over the Ni/CeO 2 catalyst, resulting in a refined bio-oil with a 37.5-38.9% lower oxygen content and a high heating value (HHV) of up to 25 MJ/kg.

09 BIOMASS FUELS↗

Electrochemically-assisted removal of cadmium ions by redox active Cu-based metal-organic framework

An electrochemically-assisted wastewater treatment using Faradaic materials offers a promising technique for the selective removal of hazardous substances. Here, we demonstrate the reversible capture and release of cadmium ions in aqueous solutions, using a redox-active metal-organic framework (MOF) electrode. As-synthesized copper-based MOF (Cu-MOF-74; copper 2,5-dihydroxyterephthalate) is a highly attractive candidate for Faradaic electrosorption due to its large surface area, water stability, and redox-active metal nodes. Our work demonstrates the reversible capture and release of Cd 2+ ions assisted by the electrochemical redox reaction of Cu 2+ /Cu + within the MOF structure. Combined material characterization and electrosorption tests were carried out to determine the operational conditions for maximizing adsorption capacity, energy efficiency, and material stability, thus leading to excellent electrosorption (>100 mg g -1 ) and regeneration efficiency (>90%). This study demonstrates the feasibility of leveraging MOFs containing redox-active metal nodes for the selective separation of toxic cations, and paves the way for promising future applications of these 3-D porous structures for wastewater treatment and environmental remediation.

42 ENGINEERING↗

Process intensification of CO 2 capture by low-aqueous solvent

Low-energy solvent-based CO 2 absorption processes have drawn attention as a next-generation post-combustion CO 2 capture technology to reduce CO2 emissions from fossil fuel– or biomass-fired power generation and industrial flue gas streams. A low-aqueous (or water-lean) solvent process may substantially reduce the thermal energy consumption for solvent regeneration. Low-aqueous solvent–based processes are thermally sensitive, requiring a delicate temperature control within the absorber because of the fast exothermic amine-CO 2 reaction and low heat capacity organic diluent. This reaction may result in heat accumulation in a packed absorption column and undesirable CO 2 desorption occurring as the solvent moves through the column, reducing the solvent’s CO 2 capture efficiency if its temperature is not controlled. Using a 3D printed intensified packing device, enhanced heat and mass transfer were demonstrated in an amine-CO 2 scrubbing process using low-aqueous solvent. The multifunctional intensified device facilitates contact of the reactive solvent and gas phases in a single stage and heat removal by a cooling fluid flowing through channels in the interior of the corrugated plates of the device. These functionalities led to effective thermal management along the column via intrastage cooling and significant improvement in CO 2 uptake under a wide range of operating conditions. Intrastage cooling effectively reduced the solvent average temperature along the column by ~10 °C and, as a result, the solvent’s capture efficiency improved by up to 25%.

42 ENGINEERING↗

Polyethylene upcycling to fuels: Narrowing the carbon number distribution in n-alkanes by tandem hydropyrolysis/hydrocracking

The extensive use of plastics in modern life has resulted in a global waste crisis to the environment. Polyethylene (PE) is one of the most popular and hardest plastics to recycle because of its strong C(sp 3 )-C(sp 3 ) bonds. In this study, a tandem conversion process, i.e., hydropyrolysis and subsequent vapor-phase hydrocracking of primary intermediates (C n>5 alkenes and long-chain alkanes), was conducted via a two-step pressurized flow-through fixed-bed reactor over a CoAl 2 O 4 spinel-derived catalyst. The product distribution could be flexibly tuned by regulating operating parameters in the cascade fixed-bed reactor and Co/Al molar ratio in CoAl 2 O 4 spinel catalysts. Under optimal reaction conditions (0.2 MPa H 2 , 550 °C for hydropyrolysis in the 1st reactor, 300–325 °C for hydrocracking in the 2nd reactor, 20 s -1 of gas hourly space velocity), the maximum single-pass yields of gasoline (C 5 -C 12 ) and jet-fuel (C 8 -C 16 ) range n-alkanes reached 86.0 wt% and 68.1 wt%, respectively. The CoAl 2 O 4 spinel catalysts also gained high activity in degrading realistic post-consumer plastics such as linear low-, low-, and high-density PE, and a ~ 73.1 wt% gasoline yield and a ~ 54.7 wt% C 8 -C 16 yield were retained even after 3 cycles in-situ regeneration of deactivated CoAl 2 O 4 catalysts. This work provides an efficient and tunable approach to upcycle PE wastes into liquid fuels with an ideal carbon length.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Refine your search to explore more results.