Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFLECTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Spectral reflectance signatures of coastal pollutants

The author has identified the following significant results. Remote sensing from satellites and aircraft was combined with ground truth collected from ships in an attempt to classify coastal and estuarine water types by their spectral reflectance signatures. During ocean waste disposal operations 40 miles off the Delaware coast, water samples were collected and spectroradiometric measurements conducted in the field to provide ground truth for aircraft and LANDSAT overpasses with multispectral scanners.

Klemas, V.↗

Results of an analytical study of spacecraft deposition contamination by internal reflection spectroscopy

Outgassing, deposition, and desorption kinetics of silicone compounds, are examined as examples of optical surface contaminants of spacecraft windows. Their behavior in a space environment after exposure to ultraviolet radiation is also examined. The use of internal reflection spectroscopy is shown to provide a viable means of real-time, in-situ identification of contaminants of orbiting spacecraft. The instrumental techniques are proposed as the basis of further investigations and the development of flight hardware.

Mookherji, T.↗

Reflection-plane tests of spoilers on an advanced technology wing with a large Fowler flap

Wind tunnel experiments were conducted to determine the effectiveness of spoilers applied to a finite-span wing which utilizes the GA(W)-1 airfoil section and a 30% chord full-span Fowler flap. A series of spoiler cross sectioned shapes were tested utilizing a reflection-plane model. Five-component force characteristics and hinge moment measurements were obtained. Results confirm earlier two-dimensional tests which showed that spoilers could provide large lift increments at any flap setting, and that spoiler control reversal tendencies could be eliminated by providing a vent path from lower surface to upper surface. Performance penalties due to spoiler leakage airflow were measured.

Wentz, W. H., Jr.↗

Reflected-wave maser

A number of traveling-wave, slow-wave maser structures, containing active maser material but absent the typical ferrite isolators, are immersed in a nonuniform magnetic field. The microwave signal to be amplified is inserted at a circulator which directs the signal to a slow-wave structure. The signal travels through the slow-wave structure, being amplified according to the distance traveled. The end of the slow-wave structure farthest from the circulator is arranged to be a point of maximum reflection of the signal traveling through the slow-wave structure. As a consequence, the signal to be amplified traverses the slow-wave structure again, in the opposite direction (towards the circulator) experiencing amplification equivalent to that achieved by a conventional traveling-wave maser having twice the length. The circulator directs the amplified signal to following like stages of amplification. Isolators are used in between stages to prevent signals from traveling in the wrong direction, between the stages. Reduced signal loss is experienced at each stage. The high gain produced by each slow-wave structure is reduced to a moderate value by use of a nonuniform magnetic field which also broadens the line width of the maser material. The resulting bandwidth can be exceptionally wide. Cascaded stages provide high gain, exceptionally wide bandwith and very low noise temperature.

Clauss, R. C.↗

Moisture resistant and anti-reflection optical coatings produced by plasma polymerization of organic compounds

The need for protective coatings on critical optical surfaces, such as halide crystal windows or lenses used in spectroscopy, has long been recognized. It has been demonstrated that thin, one micron, organic coatings produced by polymerization of flourinated monomers in low temperature gas discharge (plasma) exhibit very high degrees of moisture resistence, e.g., hundreds of hours protection for cesium iodide vs. minutes before degradation sets in for untreated surfaces. The index of refraction of these coatings is intermediate between that of the halide substrate and air, a condition for anti-reflection, another desirable property of optical coatings. Thus, the organic coatings not only offer protection, but improved transmittance as well. The polymer coating is non-absorbing over the range 0.4 to 40 microns with an exception at 8.0 microns, the expected absorption for C-F bonds.

Hollahan, J. R.↗

Diffraction of a shock wave by a compression corner. I - Regular reflection

The unsteady, two-dimensional flowfield resulting from the interaction of a moving planar shock wave with a compression corner is determined using a second-order, discontinuity-fitting, finite-difference approach. The time-dependent Euler equations are transformed to normalize the distance between the body and peripheral shock and to include the existing self-similar property of the flow. The resulting set of partial differential equations in conservation-law form is then solved in a time-dependent fashion using MacCormack's scheme. The vortical singularity, which lies on the body surface, and the single reflected shock are both treated as discontinuities in the numerical procedure. The results of the numerical simulation compare quite favorably with existing experimental interferograms and yield better flowfield resolution than previous first-order, shock-capturing, numerical solutions.

Kutler, P.↗

Entry into outer planet environments. II - Performance of volume reflecting hyperpure silica heat shields

The performance of hyperpure silica heat shields that backscatter incident radiation in the depths of the material, i.e., a volume reflecting heat shield, is mapped for probes entering the atmospheres of Saturn and Uranus. Three models of each atmosphere are considered; the warm, nominal, and cool models. The most recent thermophysical and optical properties of hyperpure silica are employed. Detailed incident radiative spectra and the effects of ablation on radiative and convective heating obtained from benchmark flowfield solutions are used. In-depth material response is examined and results are presented in terms of the peak rear-face temperature as a function of initial thickness for each atmosphere. Results are compared with carbon phenolic heat-shield requirements.

Howe, J. T.↗

Laboratory reflection spectra for the determination of chemical composition of ice bodies

The visible (0.3 to 1.03 microns) spectral reflectances of N2O, NH3, H2S, and NH4HS frosts and mixtures of these frosts as well as their UV-irradiated products have been measured. These spectra are compared with the spectra of the Galilean satellites of Jupiter, Saturn's rings, and Saturn's satellites to place limits on their surface compositions.

Lebofsky, L. A.↗

High purity silica reflective heat shield development

Measurements were made of reflectance in the vacuum ultraviolet down to 0.15 micron. Scattering coefficients (S) and absorption coefficients (K) were also measured. These coefficients express the optical properties and are used directly in a thermodynamic analysis for sizing a heat shield. The effect of the thin silica melt layer formed during entry was also studied from the standpoint of trapped radiant energy.

Blome, J. C.↗

Variability of wetland reflectance and its effect on automatic categorization of satellite imagery

The author has identified the following significant results. Land cover categorization of data from the same overpass in four test wetland areas was carried out using a four category classification system. The tests indicate that training data based on in situ reflectance measurements and atmospheric correction of LANDSAT data can produce comparable accuracy of categorization to that achieved using more than four wetlands cover categories (salt marsh cordgrass, salt hay, unvegetated, and water tidal flat) produced overall classification accuracies of 85% by conventional and relative radiance training and 81% by use of in situ measurements. Overall mapping accuracies were 76% and 72% respectively.

Klemas, V.↗

JPL field measurements at the Finney County, Kansas, test site, October 1976: Meteorological variables, surface reflectivity, surface and subsurface temperatures

Data collected at the Finney County, Kansas test site as part of the Joint Soil Moisture Experiment (JSME) are presented here, prior to analysis, to provide all JSME investigators with an immediate source of primary information. The ground-truth measurements were taken to verify and complement soil moisture data taken by microwave and infrared sensors during aircraft overflights. Measurements were made of meteorological variables (air speed, temperature, relative humidity, and rainfall), surface reflectivity, and temperatures at and below the surface.

Kahle, A. B.↗

Investigation of the effect of atmospheric dust on the determination of total ozone from the earth's ultraviolet reflectivity measurements, 1

Two computer algorithms are described. These algorithms were used for computing the aximuth-independent component of the intensity of the monochromatic radiation emerging at the top of a pseudo-spherical atmosphere with arbitrary vertical distribution of ozone, and with any arbitrary height distribution of up to two different kinds of aerosol. This atmospheric model was assumed to rest on a surface obeying Lambert's law of reflection.

Dave, J. V.↗

Atmospheric transformation of solar radiation reflected from the ocean

Airborne measurements of the brightness spectrum of the Atlantic Ocean in the wavelength region from 0.4 to 0.7 micron are analyzed. These measurements were made over a tropical region of the Atlantic from an aircraft at heights of 0.3 and 10.5 km during the TROPEX-72 experiment. The results are used to estimate the contribution of the atmosphere to the overall brightness of the ocean-atmosphere system. It is concluded that: (1) the atmosphere decreases the absolute brightness of the ocean by a factor of 5 to 10 and also strongly affects the spectral behavior of solar radiation reflected from the ocean surface; (2) the atmospheric contribution to overall brightness may vary considerably under real conditions; (3) finely dispersed particles and Rayleigh scattering affect the spectral distribution of solar radiation; and (4) the spectral composition of ocean-atmosphere brightness may be completely governed by the atmosphere.

Malkevich, M. S.↗

Spectral structure of the field of solar radiation reflected from the ocean/atmosphere system

The statistical characteristics of the spectral structure of the brightness field of the ocean/atmosphere system are determined from the spectra of incident radiation and the radiation reflected from the ocean, obtained from aircraft (Conveyor 990) at heights of 0.3 and 10 km above the Atlantic Ocean. Analysis of the spectral structure reveals a weak correlation between atmospheric brightness variations in the 0.4 to 0.5 micron and 0.55 to 0.70 micron regions of the spectrum. This is attributed to the possible influence of variations of the scattering coefficient or optical thickness on the brightness variations (whose sign depends on the predominance of damping or multiple scattering in a given spectral region).

Malkevich, M. S.↗

CO observations of galactic reflection nebulae

Carbon monoxide emission has been observed toward about 35 galactic reflection nebulae. The peaking of CO temperatures near the hotter stars indicates substantial local heating of the gas and dust by the embedded stars. Wide low-level emission wings are seen on several of the (C-12)O line profiles; these are most plausibly interpreted as due to cloud material accelerated by such processes as radiation pressure from the newborn stars.

Knapp, G. R.↗

Characterization of lunar mare basalt types. I - A remote sensing study using reflection spectroscopy of surface soils

Telescopic reflection spectra of mature mare surfaces are used to identify and characterize major basalt types on the frontside of the moon. The spectra are classified according to (1) continuum slope and (2) near-infrared features. This study indicates that there are major lunar basalt types that are unlikely to have been sampled during the landing missions. Regions of basalt exist in the western maria with a TiO2 content comparable to that of Apollo 11 but with infrared characteristics that indicate a distinctly different composition. Samples from two landing sites, Apollo 12 and Luna 16, may contain fragments of a nearby basalt unit compositionally different from the dominant basalt type of the landing area.

Pieters, C.↗

Io's surface composition based on reflectance spectra of sulfur/salt mixtures and proton-irradiation experiments

Available full-disk reflectance spectra of Io in the range 0.3 to 2.5 microns have been used to determine a surface compositional model for Io that is consistent with Io's other known chemical and physical properties. Results indicate that the surface of Io contains abundant dehydrated salts of high Na, Mg, and Fe(3+) content such as bloedite and ferrous iron sulfate. Experiments were performed studying the irradiation damage effects from low-energy proton bombardment, since Io is immersed in Jupiter's magnetosphere.

Nash, D. B.↗

Simple waveguide reflection maser with broad tunability

The design and performance of a simple two-stage reflection maser for use between 9 and 10 GHz are described. The maser is used to improve the sensitivity of a transmission electron spin resonance spectrometer. A ruby-filled waveguide structure permits broad tunability and straightforward construction. All microwave components except the ruby section are at room temperature.

Flesner, L. D.↗

Refine your search to explore more results.