Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

M379A Mutant Tyrosine Phenol–lyase from Citrobacter freundii Has Altered Conformational Dynamics

The M379A mutant of Citrobacter freundii tyrosine phenol-lyase (TPL) has been prepared. M379A TPL is a robust catalyst to prepare a number of tyrosines substituted at the 3-position with bulky groups that cannot be made with wild type TPL. The three dimensional structures of M379A TPL complexed with L-methionine and 3-bromo-DL-phenylalanine have been determined by X-ray crystallography. Methionine is bound as a quinonoid complex in a closed active site in 3 of 4 chains of homotetrameric M379A TPL. M379A TPL reacts with L-methionine about 8-fold slower than wild type TPL. The temperature dependence shows that the slower reaction is due to less positive activation entropy. The structure of the M379A TPL complex of 3-bromo-DL-phenylalanine has a quinonoid complex in two subunits, with an open active site conformation. The effects of the M379A mutation on TPL suggest that the mutant enzyme has altered the conformational dynamics of the active site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alkaline-Earth-Metal-Catalyzed Thin-Film Pyrolysis of Cellulose

Here, the conversion of lignocellulosic biomass to “bio-oils” by thermochemical pyrolysis is a promising reactor technology for renewable chemicals and biofuels. Although the fundamental understanding of relevant catalysts within reacting biomass particles is only in its infancy, it is known that inorganic materials naturally present within biomass act as catalysts that limit the yield of bio-oil and alter the product distribution. In this work, the effect of alkaline earth metals on cellulose pyrolysis chemistry was investigated to determine the catalytic effect on primary (transport-free) and secondary (diffusion-limited) reaction pathways. The catalytic materials included homogeneous metal ions Ca 2+ and Mg 2+ from their inorganic salts, Ca(NO 3 ) 2 and Mg(NO 3 ) 2 , and their corresponding heterogeneous metal oxides, CaO and MgO. Although the oxides had a limited impact on cellulose pyrolysis chemistry, the metal ions altered the secondary reaction pathways of cellulose significantly under diffusion-limited conditions common to lignocellulosic particles within industrial reactors.

09 BIOMASS FUELS↗

Methanol partial oxidation on Ag(111) from first principles

In this work, we examine the thermochemistry and kinetics of the partial oxidation of methanol to formaldehyde on silver surfaces. Periodic density functional theory calculations employing the BEEF-vdW functional are used to identify the most stable phases of the silver surface under relevant reaction conditions and the reaction energetics are obtained on these surfaces. The calculated binding energies and transition state energies are used as input in a mean-field microkinetic model providing the reaction kinetics on silver surfaces under different reaction conditions. Our results show that, under conditions pertaining to methanol partial oxidation, oxygen is present at low concentrations and it plays a critical role in the catalytic reaction. Surface oxygen promotes the reaction by activating the OH bond in methanol, thus forming a methoxy intermediate, which can react further to form formaldehyde. Finally, the dissociation of molecular oxygen is identified as the most critical step.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selectivity Control in Catalytic Reductive Amination of Furfural to Furfurylamine on Supported Catalysts

Abstract Amines are widely used in the manufacture of pharmaceuticals, agricultural chemicals, polymers, and surfactants. However, amines are mostly produced via petrochemical means, which motivates amine production from renewable resources, such as biomass. However, biomass compounds present added challenges involving poor carbon balances. We show that furfural reacts homogeneously with ammonia to produce reactive primary imines, which form large side products and leads to significant carbon losses. The carbon balance is improved by mixing furfural with furfurylamine prior to reaction to form a secondary imine for use as the reaction substrate. While controlling the primary to secondary amine selectivity is a common challenge in reductive amination, supported metal catalysts, including Ni/SiO 2 , Co/SiO 2 , and Ru/SiO 2 optimize the primary amine yield to 90 to 94 % by using the secondary imine as the reaction substrate. A qualitative correlation between the primary to secondary amine selectivity with the nitrogen binding energy of metals is identified.

Gould, Nicholas S.↗

Effect of Chloride Oxidation on Local Electric Fields in Microelectrochemical Systems

Abstract We recently reported that electrochemical oxidation of Cl − to neutral Cl 2 decreases solution conductivity, thereby yielding a local electric field gradient. Here, we report detailed experimental results and simulations indicating that the situation is more complex than we originally thought. The key new findings are twofold. First, once generated, Cl 2 rapidly reacts with water to form ionic species that increase, rather than decrease, solution conductivity near the anode. Second, the electrochemical potential gradient measured in the vicinity of the anode during Cl − oxidation is dominated by differences in the chemical potential, rather than the electrical potential, of the solution. These findings clarify the electrochemical and chemical processes previously reported to enable desalination via faradaic Cl − oxidation.

Davies, Collin D.↗

Nitrate Radical Facilitates Indirect Benzyl Alcohol Oxidation on Bismuth(III) Vanadate Photoelectrodes

Bismuth(III) vanadate (BiVO 4 ) films show activity for direct benzyl alcohol (PhCH 2 OH) oxidation to benzaldehyde (PhCHO) in acetonitrile solvent. Introducing tetrabutylammonium nitrate (Bu 4 NNO 3 ) drastically reduces the overpotential required to generate the PhCHO product while maintaining a high faradaic efficiency (FE) >90%. BiVO 4 corrosion accompanies PhCH 2 OH oxidation. However, the presence of nitrate ions (NO 3 - ) results in significantly less bismuth- and vanadium-ion leaching (determined by ICP-MS analysis), as well as reduced surface roughening (determined by SEM imaging). In this reaction, it is proposed that rate-determining NO 3 - oxidation generates a highly reactive nitrate radical (NO 3 ∙) that reacts with PhCH 2 OH by hydrogen-atom abstraction (HAT). NO 3 - is stoichiometrically consumed by the irreversible formation of electrochemically inert HNO 3 , characterized by an EC i mechanism, rather than a catalytic EC' mechanism. In the presence of PhCH 2 OH, NO 3 - oxidation on BiVO 4 becomes more facile; every order of magnitude increase in PhCH 2 OH concentration shifts the NO 3 - / NO 3 ∙ equilibrium potential negatively by 200 mV. The shift results from the introduction of a consumption pathway for the nitrate radical intermediate via a coupled chemical step with benzyl alcohol. This report is the first example of photoelectrochemical NO 3 ∙ generation to initiate indirect PhCH 2 OH oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO as a Probe Molecule to Study Surface Adsorbates during Electrochemical Oxidation of Propene

A major challenge in the electrochemical oxidation of hydrocarbons is understanding the formation of intermediate species, some of which continue to react, while others are non-reactive or poisonous species that block adsorption of further reactants. Herein we investigate the identity and behavior of adsorbates formed during partial oxidation of propene. We employ two techniques: Electrochemistry-Mass Spectrometry (EC-MS) and Attenuated Total Reflection Infrared Spectroscopy (ATR-FTIR). In both cases, we use CO as a probe molecule, to perturb the ad-layer of propene intermediates. In the EC-MS experiments, propene and its intermediates were quantified by triggering their desorption via displacement with CO. We show evidence for at least two distinct classes of propene adsorbates, via CO displacement and electrochemical stripping. A redshift in the ν(C–O) mode was observed, during IR spectroscopy, reflecting the chemical environment arising from strongly bound propene intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vanadium (II) Sulfate for the Reductive Leaching of Chalcopyrite: Replacing Smelting with Electrolysis for Copper Production

The demand for copper is expected to outpace supply in the coming decades due in part to the emergence of wind and solar technologies, which require about five times as much copper as traditional energy sources. This work introduces a potentially transformative hydrometallurgical process to extract copper from chalcopyrite, and thereby sustain a high rate of copper production throughout the 21 st century. Chalcopyrite is reacted with vanadium (II) sulfate for the first time to enable the rapid, clean, and complete recovery of copper. Reactions between 39 g/L copper concentrate, 1 M vanadium (II) sulfate, and various concentrations of sulfuric acid yielded a final product of solid copper sulfate, which was characterized by X-ray diffraction (XRD) and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS) analysis. The solid products were leached in a subsequent step to demonstrate copper yields ranging from 95–99%. The vanadium (II) ion may be regenerated by an electrolysis unit that leverages advances in vanadium flow battery technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling Planar Electrodes and Zero–Gap Membrane Electrode Assemblies for CO 2 Electrolysis

Multiphysics modeling enables probing of conditions inside a CO 2 electrolyzer that are difficult to measure, such as local concentrations and pH, as well as rapid testing of possible design changes. A one-dimensional model for a zero-gap membrane electrode assembly (MEA) CO 2 electrolyzer was developed with the assumption that catalyst layers interact with the membrane ionomer such that the ionomer affects the underlying kinetics. The kinetics for bicarbonate reacting to form hydrogen are fit using a planar electrode model for silver with an ionomer coating. The MEA model results are validated against experimental studies for current density and product selectivity. Flooding of the cathode is modeled using saturation curves, and results show that blocked pores in the microporous layer play a significant role in limiting the mass transport at high potentials (>2.8 V). Sensitivity studies showed that CO Faradaic efficiency can be increased by decreasing catalyst layer thickness and porosity, and decreasing KHCO 3 concentration.

30 DIRECT ENERGY CONVERSION↗

Growth of Crystalline Polyaminoborane through Catalytic Dehydrogenation of Ammonia Borane on FeB Nanoalloy

Tremendous effort has been devoted to the study of complex and chemical hydrides for hydrogen storage in the past decade [1, 2] . Ammonia Borane (NH 3 BH 3 , AB) with a hydrogen content of 19.6 wt % has received significant attention [3-5] . Methods to improve the kinetics of the step-wise dehydrogenation of AB are diverse including the uses of mesoporous frameworks [6] , catalysts [7-16] , and additives [17] . It was reported that when dissolving in organic solvents AB released hydrogen readily in the presence of transition metal catalysts through the formation of M∙∙∙HBH 2 NH 3 complex (where M is Ir, Ru, or Ni etc.) [8-10] ; Lewis or Brønsted acids, on the other hand, react with AB in solution to form the initiating species (BH 2 NH 3 ) + [11] , which may have the similar function as the [BH 2 (NH 3 ) 2 ] + BH 4 - (DADB) in the dehydrogenation of solid AB [17, 18] . However, comparatively little study has been reported on the catalytic dehydrogenation of AB in solid form. Other important but less investigated aspects in the solid-state reaction are the characterizations of functional catalytic species and products from the step-wise dehydrogenation.

08 HYDROGEN↗

Reactions of Pd and Pt Complexes with Molecular Oxygen

Abstract Knowledge of exactly how metal complexes react with molecular oxygen is still limited and this has hampered efforts to develop catalysts for oxidation reactions using O 2 as the oxidant and/or oxygen‐atom source. A better understanding of the reactions of different types of metal complexes with O 2 will be of great utility in rational catalyst development. Reactions between molecular oxygen and Pd 0–II and Pt 0–IV complexes are reviewed here.

Scheuermann, Margaret L.↗

Characterization and Reactivity of a Terminal Nickel(III)-Oxygen Adduct

Here, high-valent terminal metal–oxygen adducts are hypothesized to be the potent oxidizing reactants in late transition metal oxidation catalysis. In particular, examples of high-valent terminal nickel–oxygen adducts are scarce, meaning there is a dearth in the understanding of such oxidants. A monoanionic Ni II -bicarbonate complex has been found to react in a 1:1 ratio with the one-electron oxidant tris(4-bromophenyl)ammoniumyl hexachloroantimonate, yielding a thermally unstable intermediate in high yield (ca. 95%). Electronic absorption, electronic paramagnetic resonance, and X-ray absorption spectroscopies and density functional theory calculations confirm its description as a low-spin (S=1/2), square planar Ni III –oxygen adduct. Moreover, this rare example of a high-valent terminal nickel–oxygen complex performs oxidations of organic substrates, including 2,6-di-tert-butylphenol and triphenylphosphine, which are indicative of hydrogen atom abstraction and oxygen atom transfer reactivity, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-Site Osmium Catalysts on MgO: Reactivity and Catalysis of CO Oxidation

MgO-supported osmium dioxo species, described as Os(=O) 2 {-Osupport} 1 or 2 (the brackets denote O atoms of the MgO surface), formed from Os 3 (CO) 12 via supported Os(CO) 2 , and characterized by spectroscopy, microscopy, and theory, react with ethylene at 298 K to form osmium glycol species or with CO to give osmium mono- and di-carbonyls. Os(=O) 2 {-Osupport} 1 or 2 is the precursor of a CO oxidation catalyst characterized by a turnover frequency of 4.0×10 -3 (molecules of CO)/(Os atom×s) at 473 K; the active species are inferred to be osmium monocarbonyls. The structures and frequencies calculated at the level of density functional theory with the B3LYP functional bolster the experimental results and facilitate structural assignments. The lowest-energy structures have various osmium oxidation and spin states. The results demonstrate not only new chemistry of the supported single-site catalysts but also their complexity and the value of complementary techniques used in concert to unravel the chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Manganese(V)–Oxo Tetraamido Macrocyclic Ligand (TAML) Cation Radical Complex: Synthesis, Characterization, and Reactivity Studies

Here, a mononuclear manganese(V)–oxo complex with tetraamido macrocyclic ligand (TAML), [Mn V (O)(TAML)] – (1), is a sluggish oxidant in oxidation reactions. Herein, a mononuclear manganese(V)–oxo TAML cation radical complex, [Mn V (O)(TAML +. )] (2), is reported. It was synthesized by reacting [Mn III (TAML)] – with 3.0 equivalents of [Ru III (bpy) 3 ] 3+ or upon addition of one–electron oxidant to 1 and then characterized thoroughly with various spectroscopic techniques along with DFT calculations. Although 1 is a sluggish oxidant, 2 is a strong oxidant capable of activating C–H bonds of hydrocarbons (i.e., hydrogen atom transfer reaction) and transferring its oxygen atom to thioanisoles and olefins (i.e., oxygen atom transfer reaction).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogenolysis of Dinuclear PCN R Ligated Pd II μ‐Hydroxides and Their Mononuclear Pd II Hydroxide Analogues

Abstract The hydrogenolysis of mono‐ and dinuclear Pd II hydroxides was investigated both experimentally and computationally. It was found that the dinuclear μ‐hydroxide complexes {[(PCN R )Pd] 2 (μ‐OH)}(OTf) (PCN H =1‐[3‐[(di‐ tert ‐butylphosphino)methyl]phenyl]‐1 H ‐pyrazole; PCN Me =1‐[3‐[(di‐ tert ‐butylphosphino)methyl]phenyl]‐5‐methyl‐1 H ‐pyrazole) react with H 2 to form the analogous dinuclear hydride species {[(PCN R )Pd] 2 (μ‐H)}(OTf). The dinuclear μ‐hydride complexes were fully characterized, and are rare examples of structurally characterized unsupported singly bridged μ‐H Pd II dimers. The {[(PCN Me )Pd] 2 (μ‐OH)}(OTf) hydrogenolysis mechanism was investigated through experiments and computations. The hydrogenolysis of the mononuclear complex (PCN H )Pd‐OH resulted in a mixed ligand dinuclear species [(PCN H )Pd](μ‐H)[(PCC)Pd] (PCC=a dianionic version of PCN H bound through phosphorus P, aryl C, and pyrazole C atoms) generated from initial ligand “rollover” C−H activation. Further exposure to H 2 yields the bisphosphine Pd 0 complex Pd[(H)PCN H ] 2 . When the ligand was protected at the pyrazole 5‐position in the (PCN Me )Pd−OH complex, no hydride formed under the same conditions; the reaction proceeded directly to the bisphosphine Pd 0 complex Pd[(H)PCN Me ] 2 . Reaction mechanisms for the hydrogenolysis of the monomeric and dimeric hydroxides are proposed.

Bailey, Wilson D.↗

Small Molecule Activation with Intramolecular “Inverse” Frustrated Lewis Pairs

The intramolecular “inverse” frustrated Lewis pairs (FLPs) of general formula 1-BR 2 -2-[(Me 2 N) 2 C=N]-C 6 H 4 (3-6) [BR 2 = BMes 2 (3), BC 12 H 8 , (4), BBN (5), BBNO (6)] were synthesized and structurally characterized by multinuclear NMR spectroscopy and X-ray analysis. Furthermore, these novel types of pre-organized FLPs, featuring strongly basic guanidino units rigidly linked to weakly Lewis acidic boryl moieties via an ortho-phenylene linker, are capable of activating H-H, C-H, N-H, O-H, Si-H, B-H and C=O bonds. 4 and 5 deprotonated terminal alkynes to form the zwitterionic borates 1-(RC≡C-BR 2 )-2-[(Me 2 N) 2 C=NH]-C 6 H 4 (R = Ph, H) and reacted with ammonia, BnNH 2 and pyrrolidine, to generate the adducts 1-(R 2 HN→BR 2 )-2-[(Me 2 N) 2 C=NH]-C 6 H 4 , where the N-H functionality is activated by intramolecular H-bond interactions. In addition, 5 was found to rapidly add across the double bond of H 2 CO, PhCHO and PhNCO to form cyclic zwitterionic guanidinium borates in excellent yields. Likewise, 5 is capable of cleaving H 2 , HBPin and PhSiH 3 to form various amino boranes. Collectively, the results demonstrate that these new types of intramolecular FLPs featuring weakly Lewis acidic boryl and strongly basic guanidino moieties are as potent as conventional intramolecular FLPs with strongly Lewis acidic units in activating small molecules.

08 HYDROGEN↗

Ultradoping Boron on Si(100) via Solvothermal Chemistry

Ultradoping introduces unprecedented dopant levels into Si, which transforms its electronic behavior and enables its use as a next-generation electronic material. Commercialization of ultradoping is currently limited by gas-phase ultra-high vacuum requirements. Solvothermal chemistry is amenable to scale-up. However, an integral part of ultradoping is a direct chemical bond between dopants and Si, and solvothermal dopant-Si surface reactions are not well-developed. This work provides the first quantified demonstration of achieving ultradoping concentrations of boron (~1e14 cm 2 ) by using a solvothermal process. Surface characterizations indicate the catalyst cross-reacted, which led to multiple surface products and caused ambiguity in experimental confirmation of direct surface attachment. Density functional theory computations elucidate that the reaction results in direct B-Si surface bonds. Finally, this proof-of-principle work lays groundwork for emerging solvothermal ultradoping processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

E ‐selective Semi‐hydrogenation of Alkynes under Mild Conditions by a Diruthenium Hydride Complex

Abstract The synthesis, characterization and catalytic activity of a new class of diruthenium hydrido carbonyl complexes bound to the t Bu PNNP expanded pincer ligand is described. Reacting t Bu PNNP with two equiv of RuHCl(PPh 3 ) 3 (CO) at 140 °C produces an insoluble air‐stable complex, which was structurally characterized as [Ru 2 ( t Bu PNNP)H(μ‐H)Cl(μ‐Cl)(CO) 2 ] ( 1 ) using solid‐state NMR, IR and X‐ray absorption spectroscopies and follow‐up reactivity. A reaction with KO t Bu results in deprotonation of a methylene linker to produce [Ru 2 ( t Bu PNNP * )H(μ‐H)(μ‐O t Bu)(CO) 2 ] ( 3 ) featuring a partially dearomatized naphthyridine core. This enables metal‐ligand cooperative activation of H 2 analogous to the mononuclear analogue, [Ru( t Bu PNP*)H(CO)]. In contrast to the mononuclear system, the bimetallic analogue 3 catalyzes the E ‐selective semi‐hydrogenation of alkynes at ambient temperature and atmospheric H 2 pressure with good functional group tolerance. Monitoring the semi‐hydrogenation of diphenylacetylene by 1 H NMR spectroscopy shows the intermediacy of Z ‐stilbene, which is subsequently isomerized to the E ‐isomer. Initial findings into the mode of action of this system are provided, including the spectroscopic characterization of a polyhydride intermediate and the isolation of a deactivated species with a partially hydrogenated naphthyridine backbone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Refine your search to explore more results.