Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RANS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Snow-corrected vegetation indices for improved gross primary productivity assessment in North American evergreen forests

North American evergreen forests cover large areas and influence the global carbon cycle. Satellite remote sensing has been used to track the phenology of ecosystem photosynthesis of these forests by detecting variation in vegetation optical properties associated with physiological and structural features, and most of these methods have been closely tied to vegetation greenness. However, in evergreens, the application of satellite data to monitor photosynthetic phenology is often limited by the lack of sensitivity of greenness-based indices. In this study, we identified 47 evergreen forest flux sites in North America that had MODIS observation overlapping with the flux tower records. We then calculated four vegetation indices using MODIS MAIAC data (MCD19A1), including NDVI, CCI, NIRv, and kNDVI, for the 47 flux sites and evaluated relationships between gross primary productivity (GPP) and vegetation indices across the North American evergreen forests. Our results showed that snow had substantial effects on the performance of all vegetation indices in tracking GPP phenology, particularly in the early spring when rapid changes occurred to both GPP and snow cover. Furthermore, different vegetation indices were affected differently, indicating contradictory and confounding effects of snow on these indices. After correcting for the snow effects, both CCI and NIRv performed well in tracking GPP phenology, albeit for different reasons. CCI is sensitive to seasonal changes in the relative levels of chlorophyll and carotenoid pigments, which are closely tied to GPP phenology in evergreens. NIRv is sensitive to the absorbed photosynthetically active radiation and to the contribution of deciduous components to the overall optical properties. We also found that correlations between GPP and vegetation indices varied among ecoregions and climate classes. In general, regions with pronounced seasonal GPP patterns had stronger correlations between GPP and greenness-based indices than regions with weaker seasonal GPP patterns. These biome differences were less pronounced for CCI. The snow artifacts and complementary vegetation index effects reported here should be considered in any large-scale studies of GPP using reflectance-based indices from optical satellites.

54 ENVIRONMENTAL SCIENCES↗

Four equation k-omega based turbulence model with algebraic flux for supercritical flows

Hydrocarbon and nuclear fuels will contribute substantially to the growing global energy portfolio for some time to come. At the same time atmospheric carbon levels and economic concerns are increasingly shaping the power generation environment. Supercritical fluid technologies are being investigated to address both concerns. For example, direct fired supercritical CO 2 power cycles offer key advantages for carbon capture and thermal efficiency. Additionally, the supercritical water reactor Generation IV nuclear reactor allows higher power densities and more efficient operation than current pressurized or boiling water reactors. As these technologies are developed, a need exists for accurate, yet cost-effective modeling and simulation solutions to assist with design and safety calculations. Supercritical fluid properties are strongly dependent on temperature which results in a number of unique flow features. Among these features are the complex buoyancy and buoyancy-turbulence interaction behaviors exhibited by supercritical flows that are not found in liquid or gas flows. Therefore, standard turbulence models with current model coefficient values are not likely to be applicable to supercritical fluid flows. The subject of this paper is efficient modeling and simulation of supercritical flows to support nascent technologies growing to maturation and operational deployment. We present a framework for developing Reynolds-Averaged Navier-Stokes turbulence models specifically equipped for the challenges of supercritical flows. A novel formulation of the algebraic heat flux model of the buoyancy production of turbulence term is used with a traditional shear stress transport model. To produce a new turbulence model for supercritical channel flows, the empirical coefficients of the resulting four equation model were calculated from data previously published by other authors regarding upward supercritical flow through heated pipes. The presented SST k t - ω t approach was validated against heated tube experiments to show predictive capabilities in moderate flow conditions, where buoyancy effects are important but not dominating of inertial effects.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

General monogamy property of global quantum discord and the application

We provide a family of general monogamy inequalities for global quantum discord (GQD), which can be considered as an extension of the usual discord monogamy inequality. It can be shown that those inequalities are satisfied under the similar condition for the holding of usual monogamy relation. We find that there is an intrinsic connection among them. Furthermore, we present a different type of monogamy inequality and prove that it holds under the condition that the bipartite GQDs do not increase when tracing out some subsystems. We also study the residual GQD based on the second type of monogamy inequality. As applications of those quantities, we investigate the GQDs and residual GQD in characterizing the quantum phase transition in the transverse field Ising model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The precise time-dependent solution of the Fokker–Planck equation with anomalous diffusion

We study the time behavior of the Fokker–Planck equation in Zwanzig’s rule (the backward-Ito’s rule) based on the Langevin equation of Brownian motion with an anomalous diffusion in a complex medium. The diffusion coefficient is a function in momentum space and follows a generalized fluctuation–dissipation relation. We obtain the precise time-dependent analytical solution of the Fokker–Planck equation and at long time the solution approaches to a stationary power-law distribution in nonextensive statistics. As a test, numerically we have demonstrated the accuracy and validity of the time-dependent solution. - Highlights: • The precise time-dependent solution of the Fokker–Planck equation with anomalous diffusion is found. • The anomalous diffusion satisfies a generalized fluctuation–dissipation relation. • At long time the time-dependent solution approaches to a power-law distribution in nonextensive statistics. • Numerically we have demonstrated the accuracy and validity of the time-dependent solution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Global quantum discord and quantum phase transition in XY model

We study the relationship between the behavior of global quantum correlations and quantum phase transitions in XY model. We find that the two kinds of phase transitions in the studied model can be characterized by the features of global quantum discord (GQD) and the corresponding quantum correlations. We demonstrate that the maximum of the sum of all the nearest neighbor bipartite GQDs is effective and accurate for signaling the Ising quantum phase transition, in contrast, the sudden change of GQD is very suitable for characterizing another phase transition in the XY model. This may shed lights on the study of properties of quantum correlations in different quantum phases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High fidelity Dicke-state generation with Lyapunov control in circuit QED system

In this paper, we propose a scheme to generate highly entangled Dicke-state in circuit quantum electrodynamics (QED) system, where the quantum tunneling between local potential wells is manipulated by using Lyapunov control. We employ two different types of control Hamiltonians to generate Dicke-state: one is the local Hamiltonian that requires to individually modulate control fields; the other is the global Hamiltonian (global control) where the control fields can be modulated uniformly. Furthermore, the target Dicke-state can be obtained with arbitrary initial states when applying the average-value-based Lyapunov control. Numerical simulations demonstrate that the generation of Dicke-state is remarkably accelerated by using bang–bang Lyapunov control, and the multipartite Dicke-state is implemented at nanoseconds without accurately controlling the evolution time in ultrastrong coupling regime. In addition, the scheme is robust against some kinds of uncertainties and perturbations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Aerobic oxidation of alcohols over Ru-Mn-Ce and Ru-Co-Ce catalysts: The effect of calcination temperature

We report two ternary mixed oxides, Ru-Mn-Ce and Ru-Co-Ce, were prepared by a co-precipitation method and used in the aerobic oxidation of alcohols to corresponding aldehydes (ketones). Interestingly, different catalytic results were obtained when these compounds were calcined. The calcination temperature had an adverse effect on the catalytic performance of Ru-Mn-Ce catalysts, while being beneficial to the Ru-Co-Ce catalysts. To illustrate these effects, these materials were characterized using X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), Temperature-programmed reduction (TPR), Electron paramagnetic resonance (EPR) and other techniques. The data showed that ruthenium oxides were uniformly dispersed in the mixed oxides, and phase transformations occur after calcination. Mn 3 O 4 was transformed to MnO 2 for the Ru-Mn-Ce catalyst, while CoO(OH) was transformed to Co 3 O 4 in the Ru-Co-Ce catalyst. The interactions between ruthenium oxides and Co (Mn)-Ce mixed oxides of the former strengthened while the latter weakened. Calcination decreased the content of adsorbed oxygen and restricted oxygen transfer mechanism in the manganese system, while the opposite effect was observed with the cobalt-containing catalyst. Under optimal reaction conditions, various kinds of alcohols were transformed to corresponding aldehydes (ketones) in high yields over the Ru-Mn-Ce catalyst suggesting these ternary oxides are environmental friendly and economical catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

TiO 2 Supported gold–palladium catalyst for effective syngas production from methane partial oxidation

The CO and H 2 (syngas) production from methane partial oxidation (MPO) using TiO 2 supported Au-Pd bimetallic catalysts are discussed. The supported Au, Pd and Au-Pd bimetallic nanoparticles were prepared by an incipient wetness impregnation or co-impregnation method and were characterized. The supported Au-Pd catalyst was selective for reforming and was more active compared to bare TiO 2 , TiO 2 supported Au only, or Pd only catalysts. The catalyst properties before and after MPO reaction were investigated, including the stability of the TiO 2 support, and the stability of Au and Pd nanoparticles. The supported Au-Pd catalyst has the highest TON (TON H2 = 23 at 650 °C), compared to supported Au catalyst (TON H2 < 1) and supported Pd catalyst (TON H2 < 1). Based on the analysis of outlet gases from the MPO reaction in a flow reactor, synergetic effects between Au and Pd, where Pd activates CH bonds while gold modulates the behavior of oxygen at the catalyst surface, are shown to contribute to MPO. Additionally, the Au-Pd/TiO 2 material shows long-term activity (>12 h) for the MPO reaction at 600 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel improved model for building energy consumption prediction based on model integration

Building energy consumption prediction plays an irreplaceable role in energy planning, management, and conservation. Constantly improving the performance of prediction models is the key to ensuring the efficient operation of energy systems. Moreover, accuracy is no longer the only factor in revealing model performance, it is more important to evaluate the model from multiple perspectives, considering the characteristics of engineering applications. Based on the idea of model integration, this paper proposes a novel improved integration model (stacking model) that can be used to forecast building energy consumption. The stacking model combines advantages of various base prediction algorithms and forms them into “meta-features” to ensure that the final model can observe datasets from different spatial and structural angles. Two cases are used to demonstrate practical engineering applications of the stacking model. A comparative analysis is performed to evaluate the prediction performance of the stacking model in contrast with existing well-known prediction models including Random Forest, Gradient Boosted Decision Tree, Extreme Gradient Boosting, Support Vector Machine, and K-Nearest Neighbor. The results indicate that the stacking method achieves better performance than other models, regarding accuracy (improvement of 9.5%–31.6% for Case A and 16.2%–49.4% for Case B), generalization (improvement of 6.7%–29.5% for Case A and 7.1%-34.6% for Case B), and robustness (improvement of 1.5%–34.1% for Case A and 1.8%–19.3% for Case B). The proposed model enriches the diversity of algorithm libraries of empirical models.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Heterogeneity or illusion? Track the carbon Kuznets curve of global residential building operations

Residential buildings, the “last mile” sector in the global decarbonization, have become the most significant uncertain factor hindering carbon neutrality with increasing household energy demand. To track the operational carbon in buildings, this study investigates the carbon Kuznets curve (CKC) and the corresponding decoupling status of residential building operations at four emission scales by using the data of 30 countries from 2000 to 2019. The results show that (1) the CKC model can fit more than half of the samples. Most curves have an inverted U-shape, with 76% of emission per household and 82% of total emissions. (2) In the presence of the CKC, over four-fifths of global residential buildings peak regardless of any emission scale. The analysis denotes that the carbon emissions of developed countries reach their peaks earlier. In the total emissions, the samples’ peaking proportion is 20% and 25% with income per capita < 20,000 United States dollars (USD) and 20,000–40,000 USD, respectively. (3) The Tapio decoupling analysis and the threshold regression effectively verify the robustness and the heterogeneity of CKCs, respectively. Strong decoupling effects of CKCs in most countries are demonstrated at the scales of emission per floor space and the total emissions, and the heterogeneity proves the classic inverted U-shaped relationship between economy and emissions doesn’t exist in all emitters. Overall, this study tracks the historical carbon emission trajectories of residential building operations at a global scale, providing reference for different economies to simulate the dynamic of building carbon emissions along with the economic booming.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Towards COP27: Decarbonization patterns of residential building in China and India

As the two largest emerging emitters with the highest growth in operational carbon emissions from residential buildings, the historical emission patterns and decarbonization efforts of China and India warrant further exploration. This study aims to be the first to present a carbon intensity model considering end-use performances, assessing the operational decarbonization progress of residential building in India and China over the past two decades using the newest decomposing structural decomposition approach. Results indicate (1) the annual operational carbon intensity increased by 1.4% and 2.5% in China and India, respectively, between 2000 and 2020. Household expenditure-related energy intensity and emission factors were crucial in decarbonizing residential buildings. (2) Building electrification played a significant role in decarbonizing space cooling (–87.7 in China and – 130.2 kg of carbon dioxide (kgCO 2 ) per household in India) and appliances (~ –169.7 in China and ~ –43.4 kgCO 2 per household in India). (3) China and India collectively decarbonized 1498.3 and 399.7 M-tons of CO 2 in residential building operations, respectively. In terms of decarbonization intensity, India (164.8 kgCO 2 per household) nearly caught up with China (182.5 kgCO 2 per household) in 2020 and is expected to surpass China in the upcoming years, given the country's robust annual growth rate of 7.3%. Overall, this study provides an effective data-driven tool for investigating the building decarbonization potential in China and India, and offers valuable insights for other emerging economies seeking to decarbonize residential buildings in the forthcoming COP28 1 age.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Refine your search to explore more results.