Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process Scaling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Nanopinhole Passivating Contact Si Solar Cells Fabricated with Metal-Assisted Chemical Etching

Monocrystalline Si (c-Si) solar cells with passivating contacts based on doped polycrystalline Si (poly-Si) on ≈2.0 nm silicon oxide (SiO x ) require >1000 °C thermal processing to create conducting pinholes in the SiO x layer. However, this high thermal budget can induce bulk defects in the Czochralski c-Si wafers used as the cell absorber layer. We demonstrate that pinholes can instead be created using metal-assisted chemical etching on planar or textured morphologies, at room temperature. This wet process creates up to 200 nm wide conducting pinholes that are directly observed with transmission electron and atomic force microscopies. High-performance hole-selective poly-Si/SiN y /SiO x and electron-selective poly-Si/SiO x passivating contacts are fabricated and implemented in laboratory-scale solar cells. This process development significantly broadens the range of passivation layer materials, their thicknesses, and surface morphologies, which enables the design of poly-Si contacts with superior passivating quality.

14 SOLAR ENERGY↗
DOE OSTI2021

Exploring QCD Factorization at Moderate Energy Scales

Asymptotic freedom in QCD facilitates the use of partonic degrees of freedom over short distances, but physical processes are sensitive to a wide range of scales. Thus, it is necessary in QCD calculations to utilize a factorization scheme to separate a process into perturbative and non-perturbative factors. This separation relies on an assumption that one energy scale is infinitely larger than the other scales involved in the process. However, much experimental research in areas such as nucleon structure and quark-hadron duality occur at more moderate energy scales where that basic assumption may not be true but perturbative calculations should still be useful. Thus, an exploration of the limits of factorization at more moderate energy scales is needed. This dissertation examines various aspects of factorization at these energy scales first by applying the necessary approximations to a simple model where exact calculations are possible and so the effects of these approximations can be quantified. This is followed by examining areas where corrections are known to be needed. First is an exploration of target mass corrections (TMCs) in the case of deep inelastic scattering (DIS), including a discussion of what large corrections imply about the target structure. Second, is a general examination of PDFs and FFs at moderate scales. Third, I will discuss how this fits into the long-term effort to study the transition between small transverse momentum (generated non-perturbatively) and large transverse momentum (generated in the hard process)

Moffat, Eric↗
DOE OSTI2025

Interactions Between Clouds and Wind-Driven Surface Heat Exchanges over Land

Earth system model experiments show that increasing horizontal resolution fundamentally alters the simulated soil-moisture-precipitation feedback. Kilometer-scale simulations often produce weaker or even negative feedback compared to coarse-resolution models. A key difference of kilometer-scale models is that they resolve mesoscale secondary circulations, including boundary layer horizontal rolls and cellular structures, in addition to cold pools and downdrafts associated with convective precipitation. However, because the relevant processes occur on yet-smaller scales, these circulations are often poorly resolved. This project demonstrated that boundary layer secondary circulations significantly affect surface heat exchanges and wind gusts, and that current model parameterizations can misrepresent these processes at kilometer-scale resolution. Using DOE Atmospheric Radiation Measurement (ARM) observations and targeted experiments with the DOE Energy Exascale Earth System Model (E3SM), we identified physically unrealistic wind gust and surface flux responses to secondary circulations, diagnosed a systematic overestimation of wind shear in convective cold pools, and uncovered a multivariate relationship between land surface fluxes and the scales of updrafts that form shallow cumulus clouds. These findings provide observation-based recommendations for improving parameterizations of surface fluxes and wind gusts in high-resolution Earth system models, thereby reducing uncertainty in convective storm prediction and land-atmosphere feedbacks.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Estimating snow cover from high-resolution satellite imagery by thresholding blue wavelengths

We report the extent and duration of snow cover, a critical component of the hydrologic cycle and the global climate system, is expected to shift dramatically under climate change. Therefore, developing high-resolution assessments of snow cover change is crucial for estimating the impact of changing snow cover on watershed and ecosystems processes in cold regions. Remote sensing tools provide a powerful method for mapping snow-covered area (SCA) across a landscape. The most common method for estimating SCA utilizes the normalized difference snow index (NDSI), which relies on spectral measurements in the shortwave-infrared wavelengths (SWIR). NDSI can effectively estimate catchment- to regional-scale SCA, but it cannot be used to assess fine-scale SCA because of current limitations on the spatial resolution of satellite-derived SWIR measurements. Here, we map SCA using a threshold of blue wavelengths and high-resolution satellite imagery. The thresholding method, which we call the Blue Snow Threshold algorithm (BST), has previously been used with digital camera imagery. We refine and automate the algorithm for use with cloud-free high-resolution satellite imagery and find that the BST can be used to assess fine-scale SCA. For validation, we compared BST-derived estimates of SCA to a) airborne lidar surveys, b) Landsat fractional SCA, and c) snow disappearance dates from Snow Telemetry (SNOTEL) stations. When compared to airborne lidar surveys of SCA, the BST predicted SCA had a range of F-scores between 0.81 and 0.94 in four study areas in California and Colorado. We also found general agreement between SCA and snow disappearance at multiple SNOTEL sites across the western United States. Given the relatively recent availability of high-resolution satellite imagery with spectral measurements in the visible wavelengths but lacking in SWIR, the BST offers a reliable and easy-to-apply tool for examining fine-scale snow-related processes.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2000

Transport and Mixing in the Stratosphere and Troposphere

Long-term changes in the composition of the atmosphere are known to have significant effects on atmospheric chemistry and stratospheric ozone. Increasing levels of greenhouse gases have the potential to change the global climate in the middle and upper atmospheres, as well as in the troposphere. Volcanic eruptions, El Nino events, and other natural variations can also cause changes in atmospheric composition and climate. Whether the causes are natural or manmade, changes in the global climate system can have impacts on human society. In order to understand and predict the consequences of these changes, and of control measures such as the Montreal Protocol, it is necessary to understand the complex interactions between radiation, chemistry, and dynamics in the atmosphere. Much of the uncertainty in our understanding of atmospheric processes comes from an incomplete understanding of atmospheric transport. A complete and self-consistent model of transport requires not only an understanding of trace-species transport, but also the transport of dynamically active quantities such as heat and potential vorticity. Therefore, the goal of the proposed research is to better understand large-scale transport and mixing processes in the middle atmosphere and troposphere.

Bowman, Kenneth P.↗
DOE OSTI2021

Scale interactions and anisotropy in Rayleigh–Taylor turbulence

We study energy scale transfer in Rayleigh–Taylor (RT) flows by coarse graining in physical space without Fourier transforms, allowing scale analysis along the vertical direction. Two processes are responsible for kinetic energy flux across scales: baropycnal work Λ, due to large-scale pressure gradients acting on small scales of density and velocity; and deformation work Π, due to multiscale velocity. Our coarse-graining analysis shows how these fluxes exhibit self-similar evolution that is quadratic-in-time, similar to the RT mixing layer. We find that Λ is a conduit for potential energy, transferring energy non-locally from the largest scales to smaller scales in the inertial range where Π takes over. In three dimensions, Π continues a persistent cascade to smaller scales, whereas in two dimensions Π rechannels the energy back to larger scales despite the lack of vorticity conservation in two-dimensional (2-D) variable density flows. This gives rise to a positive feedback loop in 2-D RT (absent in three dimensions) in which mixing layer growth and the associated potential energy release are enhanced relative to 3-D RT, explaining the oft-observed larger α values in 2-D simulations. Despite higher bulk kinetic energy levels in two dimensions, small inertial scales are weaker than in three dimensions. Moreover, the net upscale cascade in two dimensions tends to isotropize the large-scale flow, in stark contrast to three dimensions. Furthermore, our findings indicate the absence of net upscale energy transfer in three-dimensional RT as is often claimed; growth of large-scale bubbles and spikes is not due to ‘mergers’ but solely due to baropycnal work Λ.

42 ENGINEERING↗
DOE OSTI2021

Distribution of U, Pu and Np in a Mo-99 Recovery Process using Sachtopore NP (titania based) Absorbent Material

A laboratory scale mockup of a prototypical Mo-99 recovery process has been operated in a radioactive materials hood at Savannah River National Laboratory. This equipment has been operated with realistic concentrations of uranium (U-238), plutonium (94% Pu-239), neptunium (Np-237), and non-radioisotopes of common fission products (including Mo). The goal of this work was to determine the amounts of U, Pu, and Np in the liquid waste streams created by the wash streams for the production process. The key question was how the initial acid wash volume will be handled, as this solution contains residual raffinate which amounted to ~ 3% ofthe mass ofthe feed solution in this experiment. If the initial 1.9 bed volumes (BV) of acid wash were recycled as in this experiment then the combined wash solutions can be expected to contain 0.4 g U/L, 2.7 pg Pu/L and < 14 pg Np/L. If, on the other extreme, the entire acid wash solution was discarded as waste, then the combined wash solutions can be expected to contain 11 g U/L, 3.8 pg Pu/L and ~ 80 pg Np/L. The Sachtopore NP absorbent (for Mo-99 recovery) retains a minuscule fraction ofthe U (2.3 mg U per g titania or 0.03% ofthe U in the feed). The uncertainties are too large to determine how close the absorbent is to saturation with U. Less mass but a higher fraction ofthe total Np was retained by the absorbent (0.7 pg Np per g titania or ~2% of the Np in the feed). As has been reported elsewhere, a large fraction ofthe Pu fed to the titania bed was retained by the absorbent (92% of Pu in the feed or 20 pg per g titania).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

An Open-Source Framework for the Computational Analysis and Design of Autothermal Chemical Processes

The main project object was to develop software tools for simulating non-equilibrium autothermal processes, improving the prospects for identifying and designing such systems. The project demonstrates the use of these tools to simulate autothermal pyrolysis, a process recently developed at the pilot-plant scale at Iowa State University. In such process, instead of externally heating a reactor to pro-vide the enthalpy of pyrolysis, sufficient oxygen in the form of air is introduced into the reactor to support partial oxidation of reactants and products with the exothermic energy released supporting endothermic pyrolysis reactions. A fluidized bed is used to assure good mixing of biomass and oxidant and provide an isothermal reaction environment. The amount of oxygen required depends upon the kind of biomass being pyrolyzed and parasitic heat losses from the reactor. For example, for woody biomass pyrolyzed under conditions that simulate adiabatic operation, equivalence ratios can be as low as 0.06, compared to 0.20 or higher for autothermal gasifiers. By removing the heat transfer bottleneck of conventional pyrolysis, operation in autothermal mode allowed a significant increase in reactor throughput process, approaching five times the throughput of the conventionally operated pyrolyzer. Different simulation strategies were considered and developed: a zero-dimensional chemistry model was used to verify the applicability of kinetic schemes to predict biomass fast pyrolysis in autothermal conditions. Conventional chemical reactor models such as the plug flow reactor and the partially stirred reactor were used to investigate the role of mixing in the fluidized bed pyrolyzer and to establish the impact of mixing time on the gas-phase reactions. A comprehensive multiphase computational fluid dynamics (mCFD) framework, including polydisperse granular phase modeling and detailed chemical kinetics was formulated and used to model the experimental setup for autothermal biomass fast pyrolysis at ISU. Multiphase CFD was also used to investigate the role of biomass feed positioning on the mixing of biomass in the pyrolizer. Finally, a reduced order model (ROM), suitable to be implemented in process simulators was obtained. Both the mCFD and the ROM were validated against experiments.

09 BIOMASS FUELS↗
DOE OSTI2021

BETO 2021 Peer Review - Biological Upgrading of Sugars (BUS) 2.3.2.105

The Biological Upgrading of Sugars (BUS) project directly targets the anaerobic conversion of lignocellulosic feedstocks into intermediate molecules readily upgradeable to fuel precursors. Recent efforts on the BUS project have a particular emphasis on the biological production of butyric acid, an intermediate that can be readily upgraded to sustainable aviation fuel, diesel blend-stocks, and high value chemicals. The BUS project approaches this direction through a combination of strain engineering, fermentation process engineering, development of novel separations technologies, and the design and build of pilot scale systems. Our ultimate project goal is to develop an integrated cost-effective process at pilot scale to achieve DOE's MYPP targets of $2.50/GGE. The major thrust of the BUS project over the last project cycle was on the development of integrated processes surrounding the anaerobic production of carboxylic acids using diverse Clostridium species. We developed and expanded genetic tools for several Clostridium species and rewired microbial metabolism in an attempt to maximize substrate utilization and flux towards butyric acid. We designed and built novel bioreactors with an in situ product recovery system enabling the biological production and recovery of highly purified acids. We leveraged this system to generate 100s of grams of acid from corn stover hydrolysate. In this presentation we highlight data surrounding our proposed process and accompanying results from technoeconomic and life-cycle analyses of our integrated process. Finally, we detail plans of our pilot scale reactor system that is in process and discuss our future routes towards achieving economically viable and sustainable diesel and jet blendstocks.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRSDate not supplied

Modeling Self-Pressurization and Spray Bar Pressure Control of A Cryogenic Storage Tank in Normal Gravity

This paper presents computational fluid dynamics (CFD) models for simulating self-pressurization and spray-bar pressure control processes in a large-scale liquid hydrogen storage tank under normal gravity conditions. For self-pressurization, the model employs the kinetics-based Schrage equation alongside the volume-of-fluid (VOF) method to account for interfacial mass transfer. The CFD predictions of pressure and temperature are compared with experimental data from the Multipurpose Hydrogen Test Bed (MHTB) experiment, and the predicted interfacial mass transfer rates are also presented. A CFD model simulating pressure control using a spray bar has also been developed. An Eulerian-Lagrangian approach models the interactions between discrete droplets and the continuous ullage (vapor) phase. The spray model is coupled with the VOF method by tracking droplets in the ullage and removing them when they reach the liquid interface. The T-sat model calculates droplet-ullage heat and mass transfer, where droplets warm up to the saturation temperature corresponding to the ullage vapor pressure before evaporating while remaining at the saturation temperature. The evolution of tank pressure, vapor temperature, and liquid temperature predicted by the CFD model is validated against data from the MHTB spray-bar mixing experiment. Overall, the CFD models agree with experimental data, demonstrating their capability to simulate self-pressurization and pressure control processes in large-scale cryogenic storage tanks. These models can be valuable tools for designing and optimizing cryogenic fluid management systems in future applications.

Computational Fluid Dynamics↗
NASA NTRSDate not supplied

Modeling Self-Pressurization and Spray Bar Pressure Control of A Cryogenic Storage Tank in Normal Gravity

This paper presents computational fluid dynamics (CFD) models for simulating self-pressurization and spray-bar pressure control processes in a large-scale liquid hydrogen storage tank under normal gravity conditions. For self-pressurization, the model employs the kinetics-based Schrage equation alongside the volume-of-fluid (VOF) method to account for interfacial mass transfer. The CFD predictions of pressure and temperature are compared with experimental data from the Multipurpose Hydrogen Test Bed (MHTB) experiment, and the predicted interfacial mass transfer rates are also presented. A CFD model simulating pressure control using a spray bar has also been developed. An Eulerian-Lagrangian approach models the interactions between discrete droplets and the continuous ullage (vapor) phase. The spray model is coupled with the VOF method by tracking droplets in the ullage and removing them when they reach the liquid interface. The T-sat model calculates droplet-ullage heat and mass transfer, wherein droplets warm up to the saturation temperature corresponding to the ullage vapor pressure before evaporating while remaining at the saturation temperature. The evolution of tank pressure, vapor temperature, and liquid temperature predicted by the CFD model is validated against data from the MHTB spray-bar mixing experiment. Overall, the CFD models agree with experimental data, demonstrating their capability to simulate self-pressurization and pressure control processes in large-scale cryogenic storage tanks. These models can be valuable tools for designing and optimizing cryogenic fluid management systems in future applications.

Self-Pressurization↗
NASA NTRS1980

Analysis and prediction of severe storms environment

Using the special data set collected in Project SESAME (1979), an analysis and modeling efforts to test the hypothesis that a unique combination of terrain, boundary layer processes, and synoptic-scale circulations result in a preferred region of latent instability that determines the location of severe thunderstorm outbreaks are described. Because the relevant circulations are large scale, it is hypothesized that a model that contains the necessary physics will be able to predict the location of these severe storms at least 24 h in advance. Through detailed analysis of the SESAME data set and a series of numerical forecasts, the above hypothesis is being tested and it is hoped that quantitative understanding of the processes leading to the development of severe thunderstorms in the midwestern United States will be gained.

Carlson, T. N.↗
NASA NTRS2000

Influence of the Biosphere on Precipitation: July 1995 Studies with the ARM-CART Data

Ensemble sets of simulation experiments were conducted with a single column model (SCM) using the Goddard GEOS II GCM physics containing a recent version of the Cumulus Scheme (McRAS) and a biosphere based land-fluxes scheme (SSiB). The study used the 18 July to 5 August 1995 ARM-CART (Atmospheric Radiation Measurement-Cloud Atmospheric Radiation Test-bed) data, which was collected at the ARM-CART site in the mid-western United States and analyzed for single column modeling (SCM) studies. The new findings affirm the earlier findings that the vegetation, which increases the solar energy absorption at the surface together with soil and soil-moisture dependent processes, which modulate the surface, fluxes (particularly evapotranspiration) together help to increase the local rainfall. In addition, the results also show that for the particular study period roughly 50% of the increased evaporation over the ARM-CART site would be converted into rainfall with the Column, while the remainder would be advected out to the large-scale. Notwithstanding the limitations of only one-way interaction (i.e., the large-scale influencing the regional physics and not vice versa), the current SCM simulations show a very robust relationship. The evaporation-precipitation relationship turns out to be independent of the soil types, and soil moisture; however, it is weakly dependent on the vegetation cover because of its surface-albedo effect. Clearly, these inferences are prone to weaknesses of the SCM physics, the assumptions of the large-scale being unaffected by gridscale (SCM-scale) changes in moist processes, and other limitations of the evaluation procedures.

Sud, Y. C.↗
NASA NTRS2005

The Role of the Heavy Ions in the Generation of EMIC Waves

The effect of EMIC waves, generated by a positive ion temperature anisotropy on Earth s RC dynamics is one of the best known examples of wave-particle interaction in the magnetosphere and the most controversial mechanism of RC losses. Under certain conditions, relativistic electrons with energy greater than or equal to 1 MeV can be removed from the outer RB by EMIC wave scattering during a magnetic storm much faster than by any other loss mechanisms. That is why the calculation of EMIC waves are very critical part of the LWS program. Systematic studies of magnetosphere-plasmasphere-ionosphere coupling are needed in order to provide EMIC waves forecast on a global scale and include WPI processes in the RB modeling. To quantify the EMIC wave effects on the RC-ion and RB-electron dynamics, a self-consistent theoretical description of the ions, electrons, and EMIC waves should be employed in future RB studies. This talk will emphasize the role of the heavy ions in the EMIC waves formation on a global scale and their nonlinear coupling with lower hybrid waves.

Khazanov, G. V.↗
DOE OSTI2024

Investigation of Anion-Exchange Method for Purification of Fission-Produced 99 Mo

The LEU-Modified Cintichem (LMC) process is a small-scale (50- to 100-mL) method for purifying fission-produced 99 Mo. Traditionally, the process utilizes custom-made glassware and requires significant manual operations with hot cell manipulators. As an alternative to the LMC process, there is great interest in developing a 99 Mo purification method that could be automated to minimize remote handling while achieving the same purity specifications for the 99 Mo product. This report explores an ion-exchange approach to purifying fission-produced 99 Mo and discusses the decontamination factors for various fission products that are present after initial recovery of Mo on a titania column from a sulfate-based and uranium-containing solution.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2026

Development of Industrial Scale Rare Earth Master Alloys from Their Native Oxides for Magnet Production

The objective of the project is to develop an energy-efficient, reduced cost, and single-step critical metal oxide reduction and alloying methodology for the production of NdFeB and SmCo magnets to facilitate the establishment of a sustainable domestic critical materials supply chain. The method consists of an immiscible molten salt flux layer and a higher density molten metal alloy pool (FeB or Co). The rare earth (RE) oxide and a reductant are added to the molten salt layer, where the reductant first strips the oxygen from the rare earth oxide. Subsequently, the separated RE metal diffuses into the molten metal pool below, creating a RE-saturated master alloy. Towards this end, thermodynamic calculations of the reactions between RE oxides, metallic reducing agent, and molten salt bath chemistry have been performed, and the ideal feeds and conditions for extraction and diffusion to produce master alloys were established. Small-scale and scaled experimentation was performed to validate and optimize the feasibility of viable reactions, temperatures, and process conditions with regards to yield, composition, and process efficiency. Finally, full-scale experiments for the production of NdFeB and SmCo magnets were performed, and their performance characteristics were established.

36 MATERIALS SCIENCE↗
NASA NTRS1972

The p-process in explosive nucleosynthesis.

The limiting conditions consistent with p-process synthesis in supernova envelopes are inferred from calculations of the appropriate rates of proton capture and neutron photodisintegration. Temperatures in excess of 2 x 10 to the 9th power K are required, for proton mass densities of the order of 100 g cm to the minus 3rd power, if significant production of p-process nuclei is to take place on a hydrodynamic time scale. It is concluded that these processes must be appropriate to very different stellar or supernova environments.

Truran, J. W.↗
NASA NTRS2019

Fine-Scale Features of the Sun's Atmosphere: Spicules and Jets

We present an overview of fine-scale features in the Sun’s atmosphere, with a focus on spicules and jets. We consider older and newer observations and theories for chromospheric spicules and coronal jets. We also consider the connection between these features and some other solar atmospheric phenomena. We then discuss the possibility that there is a continuum of jet-like features ranging from spicules to large-scale CME-producing eruptions, all driven by similar magnetic processes operating on differing corresponding size scales. Future observational and theoretical studies will help clarify further the nature of these solar events, and elucidate possible connections between them.

Sterling, Alphonse C.↗

Refine your search to explore more results.