Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PrIMe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

The Structural Basis of Cryptosporidium-Specific IMP Dehydrogenase Inhibitor Selectivity

Cryptosporidium parvum is a potential biowarfare agent, an important AIDS pathogen, and a major cause of diarrhea and malnutrition. No vaccines or effective drug treatment exist to combat Cryptosporidium infection. This parasite relies on inosine 5{prime}-monophosphate dehydrogenase (IMPDH) to obtain guanine nucleotides, and inhibition of this enzyme blocks parasite proliferation. Here, we report the first crystal structures of CpIMPDH. These structures reveal the structural basis of inhibitor selectivity and suggest a strategy for further optimization. Using this information, we have synthesized low-nanomolar inhibitors that display 10{sup 3} selectivity for the parasite enzyme over human IMPDH2.

36 MATERIALS SCIENCE↗

Epitaxial and Strong Support Interactions between Pt and LaFeO 3 Films Stabilize Pt Dispersion

The ability to stabilize very small Pt crystallites in supported-metal catalysts following harsh treatments is an important industrial problem. Herein, we demonstrate that Pt particles can be maintained in the 1- to 2-nm range following multiple oxidation and reduction cycles at 1073 K when the particles are supported on 0.5-nm LaFeO 3 films that have been deposited onto MgAl 2 O 4 using atomic layer deposition (ALD). Characterization by Scanning Transmission Electron Microscopy (STEM) suggest that, when the catalyst is oxidized at 1073 K, the Pt crystallites are oriented with respect to the underlying LaFeO 3 . X-Ray Absorption Spectroscopy (XAS) also shows evidence for changes in the Pt environment. CO-oxidation rates for the reduced catalyst remain unchanged after five redox cycles at 1073 K. Epitaxial growth of Pt clusters and the consequent strong metal-support interaction between Pt and LaFeO 3 are indicated to be prime reasons for the enhanced catalytic performances.

36 MATERIALS SCIENCE↗

Structure and Reactivity of a High-Spin, Nonheme Iron(III)- Superoxo Complex Supported by Phosphinimide Ligands

Nonheme iron oxygenases utilize dioxygen to accomplish challenging chemical oxidations. Additionally, a further understanding of the Fe-O 2 intermediates implicated in these processes is challenged by their highly transient nature. To that end, we have developed a ligand platform featuring phosphinimide donors intended to stabilize oxidized, high-spin iron complexes. O 2 exposure of single crystals of a three-coordinate Fe(II) complex of this framework allowed for in crystallo trapping of a terminally bound Fe-O 2 complex suitable for XRD characterization. Spectroscopic and computational studies of this species support a high-spin Fe(III) center antiferromagnetically coupled to a superoxide ligand, similar to that proposed for numerous nonheme iron oxygenases. In addition to the apparent stability of this synthetic Fe-O 2 complex, its ability to engage in a range of stoichiometric and catalytic oxidation processes demonstrates that this iron-phosphinimide system is primed for development in modeling oxidizing bioinorganic intermediates and green oxidation chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational Discovery of Ultralow Thermal Conductivity in the Energy-Degenerate Polymorphic Crystal Family A 2 M 2 M’Q 4

Crystalline materials, characterized by their well-defined lattices, typically exhibit a unique global thermodynamic minimum for a specific composition. However, in this study, we discover a quaternary chalcogenide family, A 2 M 2 M’Q 4 (A: alkali metals; M: coinage metal; M’: transition or group-IVA metals; Q: chalcogens), that exhibits pervasive energy (near-)degeneracy. For a given composition, multiple structurally distinct polymorphs exist within a formation enthalpy window of only a few milli-electron volts per atom. We quantify this inherent structural flexibility using a dedicated descriptor, σ f : the standard deviation of formation enthalpies among degenerate (meta)stable polymorphs. The consistently low σf observed across the A 2 M 2 M’Q 4 family signifies a characteristically shallow and frustrated potential energy landscape, which drives pronounced lattice anharmonicity, marking these materials as prime candidates for ultralow lattice thermal conductivity (κ L ). Employing an advanced high-throughput computational framework that integrates thermodynamics, lattice dynamics, and thermal conductivity calculations, we screen 1215 A 2 M 2 M’Q 4 compounds, identifying 30 stable candidates with κ L < 0.5 W m –1 K –1 at 300 K. Among them, Rb 2 Ag 2 SnTe 4 and Rb 2 Au 2 HfTe 4 , two representatives from the IVA and TM subgroups, are predicted to show ultralow room-temperature κ L of 0.174 W m –1 K –1 and 0.295 W m –1 K –1 , respectively. A systematic analysis suggests that the nonbonding and antibonding states induced by “dual rattlers” are the origin of low thermal conductivity in these compounds. Our results position the A 2 M 2 M’Q 4 family as a rich source of intrinsic thermal insulators and suggest that polymorphic energy degeneracy may serve as a valuable signpost for identifying crystalline families with potential anharmonicity.

cations↗

Probing Ligand Exchange in the P450 Enzyme CYP121 from Mycobacterium tuberculosis : Dynamic Equilibrium of the Distal Heme Ligand as a Function of pH and Temperature

CYP121 is a cytochrome P450 enzyme from Mycobacterium tuberculosis that catalyzes the formation of a C–C bond between the aromatic groups of its cyclodityrosine substrate (cYY). The crystal structure of CYP121 in complex with cYY reveals that the solvent-derived ligand remains bound to the ferric ion in the enzyme–substrate complex. Whereas in the generally accepted P450 mechanism, binding of the primary substrate in the active-site triggers the release of the solvent-derived ligand, priming the metal center for reduction and subsequent O 2 binding. In this work we employed sodium cyanide to probe the metal–ligand exchange of the enzyme and the enzyme–substrate complex. The cyano adducts were characterized by UV–vis, EPR, and ENDOR spectroscopies and X-ray crystallography. A 100-fold increase in the affinity of cyanide binding to the enzyme–substrate complex over the ligand-free enzyme was observed. The crystal structure of the [CYP121(cYY)CN] ternary complex showed a rearrangement of the substrate in the active-site, when compared to the structure of the binary [CYP121(cYY)] complex. Transient kinetic studies showed that cYY binding resulted in a lower second-order rate constant ( k on (CN) ) but a much more stable cyanide adduct with 3 orders of magnitude slower k off (CN) rate. A dynamic equilibrium between multiple high- and low-spin species for both the enzyme and enzyme–substrate complex was also observed, which is sensitive to changes in both pH and temperature. Our data reveal the chemical and physical properties of the solvent-derived ligand of the enzyme, which will help to understand the initial steps of the catalytic mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cs 2 PbI 2 Cl 2 , All-Inorganic Two-Dimensional Ruddlesden–Popper Mixed Halide Perovskite with Optoelectronic Response

The two-dimensional Ruddlesden–Popper (RP) phases are a prime class of halide perovskites with versatile optoelectronic properties. So far, only organic–inorganic hybrid RP phases involving long organic spacers were reported in this class. Herein, we discuss an all-inorganic RP phase lead halide perovskite, Cs 2 PbI 2 Cl 2 ( 1 , I 4/ mmm space group; a = 5.6385(8) Å, c = 18.879(4) Å), synthesized by a solid-state method. The compound exhibits a band gap of E g ~ 3.04 eV and photoconductivity. We find an anomalous band gap evolution in Cs 2 Pb 1– x Sn x I 2 Cl 2 solid solutions. Our combined density functional theory and experimental study supports the thermodynamically stable nature of 1 as a unique ordered phase in the Cs 2 PbX 4 (X = Cl, Br, I) system. The calculations suggest that 1 is a direct bandgap semiconductor with relatively small effective carrier mass along the in-plane direction, consistent with the experimentally observed in-plane UV-light photoresponse. We also demonstrate that 1 is promising for radiation detection capable of α-particle counting. Moreover, 1 shows markedly ambient and thermal stability.

36 MATERIALS SCIENCE↗

Spectroscopic and Electronic Structure Study of ETHE1: Elucidating the Factors Influencing Sulfur Oxidation and Oxygenation in Mononuclear Nonheme Iron Enzymes

ETHE1 is a member of a growing subclass of nonheme Fe enzymes that catalyzes transformations of sulfur-containing substrates without a cofactor. ETHE1 dioxygenates glutathione persulfide (GSSH) to glutathione (GSH) and sulfite in a reaction which is similar to that of cysteine dioxygenase (CDO), but with monodentate (vs bidentate) substrate coordination and a 2-His/1-Asp (vs 3-His) ligand set. In this study, we demonstrate that GSS– binds directly to the iron active site, causing coordination unsaturation to prime the site for O 2 activation. Nitrosyl complexes without and with GSSH were generated and spectroscopically characterized as unreactive analogues for the invoked ferric superoxide intermediate. New spectral features from persulfide binding to the Fe III include the appearance of a low-energy Fe III ligand field transition, an energy shift of a NO– to Fe III CT transition, and two new GSS– to Fe III CT transitions. Time-dependent density functional theory calculations were used to simulate the experimental spectra to determine the persulfide orientation. Correlation of these spectral features with those of monodentate cysteine binding in isopenicillin N synthase (IPNS) shows that the persulfide is a poorer donor but still results in an equivalent frontier molecular orbital for reactivity. The ETHE1 persulfide dioxygenation reaction coordinate was calculated, and while the initial steps are similar to the reaction coordinate of CDO, an additional hydrolysis step is required in ETHE1 to break the S–S bond. Unlike ETHE1 and CDO, which both oxygenate sulfur, IPNS oxidizes sulfur through an initial H atom abstraction. Thus, factors that determine oxygenase vs oxidase reactivity were evaluated. In general, sulfur oxygenation is thermodynamically favored and has a lower barrier for reactivity. Furthermore, in IPNS, second-sphere residues in the active site pocket constrain the substrate, raising the barrier for sulfur oxygenation relative to oxidation via H atom abstraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

D-atom products in predissociation of CD{sub 2}CD{sub 2}OH from the 202-215 nm photodissociation of 2-bromoethanol.

Experimental observations of D fragments from the predissociation of rovibrationally excited partially deuterated 2-hydroxyethyl radicals, CD{sub 2}CD{sub 2}OH, are reported, and possible dissociation channels are analyzed by theory. The radicals are produced by photolysis of 2-bromoethanol at 202-215 nm, and some of them have sufficient internal energy to predissociate. D fragments are detected by 1 + 1{prime} REMPI and their TOF distributions are determined. They can be associated with vinyl alcohol and/or acetaldehyde cofragments. From analysis of the maximum velocities and kinetic energies of the observed D fragments it is concluded that they originate from the decomposition of CD2CD2OH, but the experimental resolution is insufficient to distinguish between the two possible channels leading to D products. Theoretical analysis and RRKM calculations of microcanonical dissociation rates and branching ratios for the range of available excess energies (up to 5000-8000 cm{sup -1} above the OH + C{sub 2}D{sub 4} threshold) indicate that the D-producing channels are minor (about 1%) compared to the predominant OH + C{sub 2}D{sub 4} channel, and the branching ratio for D production is more favorable when the reactant radicals have low rotational energy. The vinyl alcohol channel is strongly favored over the acetaldehyde channel at all excess energies, except near the threshold of these channels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Investigation of the Rotamers of Butadiene by High-Resolution Infrared Spectroscopy

A wide-ranging investigation of the high-resolution infrared spectrum of 1,3-butadiene was undertaken with the prime objective of finding subbands in the rotational structure attributable to the gauche rotamer, from which information about the molecular structure could be derived. The one band near 750 cm-1, which had previously been assigned to the gauche rotamer, has been shown to be a difference tone for the trans rotamer. Despite careful searching, no subbands attributable to the gauche rotamer have been found. Two weak Q branches at 463.82 and 462.19 cm-1 might arise from the gauche rotamer. The rotational structure, including two hot bands, was analyzed in the C-type band for the v12(au) mode near 525 cm-1 and the Ctype band near 162 cm-1 for the v13(au) mode. A rotational analysis was also done for the A-type band for the v24(bu) band near 300 cm-1. An unsuccessful attempt was made to extend the analysis of the B-type component of the A/B-type band for v17(bu) near 3000 cm-1. With the exception of the two weak Q branches near 460 cm-1, no new evidence for the gauche rotamer was found.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cross-Linked Nanoporous Materials from Reactive and Multifunctional Block Polymers

Polylactide-b-poly(styrene-co-2-hydroxyethylmethacrylate) (PLA-b-P(S-co-HEMA)) and polylactide-b-poly(styrene-co-2-hydroxyethylacrylate) (PLA-b-P(S-co-HEA)) were synthesized by combination of ring-opening polymerization and reversible addition-fragmentation chain transfer polymerization. {sup 1}H nuclear magnetic resonance spectroscopy and size exclusion chromatography data indicated that the polymerizations were controlled and that hydroxyl groups were successfully incorporated into the block polymers. The polymers were reacted with 4,4{prime}-methylenebis(phenyl isocyanate) (MDI) to form the corresponding cross-linked materials. The materials were annealed at 150 C to complete the coupling reaction. Robust nanoporous materials were obtained from the cross-linked polymers by treatment with aqueous base to hydrolyze the PLA phase. Small-angle X-ray scattering study combined with scanning electron microscopy showed that MDI-cross-linked PLA-b-P(S-co-HEMA)/PLA-b-P(S-co-HEA) can adopt lamellar, hexagonally perforated lamellar, and hexagonally packed cylindrical morphologies after annealing. In particular, the HPL morphology was found to evolve from lamellae due to increase in volume fraction of PS phase as MDI reacted with hydroxyl groups. The reaction also kinetically trapped the morphology by cross-linking. Bicontinuous morphologies were also observed when dibutyltin dilaurate was added to accelerate reaction between the polymer and MDI.

36 MATERIALS SCIENCE↗

Poly(vinyl ester) Block Copolymers Synthesized by Reversible Addition−Fragmentation Chain Transfer Polymerizations

Homopolymerizations and block copolymerizations of vinyl acetate (VAc), vinyl pivalate (VPv), and vinyl benzoate (VBz) by reversible addition-fragmentation chain transfer (RAFT) polymerization have been studied. Polymerizations of VAc initiated with 2,2{prime}-azobis(isobutyronitrile) (AIBN) at 60 C using two different xanthate RAFT agents C{sub 2}H{sub 5}OC(=S)SR (R = -CH(CH{sub 3})CO{sub 2}C{sub 2}H{sub 5} (1) and -CH(CH{sub 3})O{sub 2}CC(CH{sub 3}){sub 3} (2)) were examined to elucidate the dependence of the polydispersities of the resulting polymers on the RAFT agent leaving group R. RAFT agent 2, in which the leaving R-group mimics a growing vinyl ester polymer chain, consistently yields poly(vinyl acetates) having broader polydispersities than those synthesized using 1 (M{sub n} = 3.6-14 kg/mol and M{sub w}/M{sub n} = 1.15-1.33). While VPv exhibits similar controlled polymerization behavior to VAc, RAFT homopolymerizations of VBz mediated by 1 indicate this electron-deficient vinyl ester requires higher temperatures to effect controlled polymerizations to yield polymers having M{sub n} = 4-14 kg/mol and M{sub w}/M{sub n} = 1.29-1.53. Chain extension reactions from xanthate-terminated vinyl ester homopolymers with VAc, VPv, and VBz proceed with variable efficiencies to furnish block copolymers that microphase separate in the melt state as determined by small-angle X-ray scattering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Seismoacoustic Analysis of Chemical Explosions at the Nevada National Security Site

In recent years, two sets of chemical explosions have been conducted at the Nevada National Security Site (NNSS): 6 explosions from Phase I of the Source Physics Experiment (SPE) and 4 explosions from the Forensics Surface Events (FSE). We have estimated the explosive yield and depth-of-burial/height-of-burst of both from the synthesis of seismic and low-frequency acoustic data. Analysis of the seismic signal is performed using a waveform envelope technique. Using seismic data only, however, there is a tradeoff between the yield and depth or height of the explosion, which becomes especially acute for near-surface events. This tradeoff between yield and depth/height can be broken by including complementary analysis of the acoustic signal using the acoustic waveform inversion method. The acoustic signal also has a strong tradeoff between a yield and depth/height, but the slope is opposite that of the seismic for near-surface events. We use a likelihood function to combine the seismic and acoustic analysis and improve our estimates of yield and depth/height for these sets of explosions. The results are generally consistent with the known parameters, but can be improved upon by higher-frequency seismic analysis and improved acoustic impulse scaling for large scaled depths-of-burial. These events serve as prime examples of data fusion from multiple data streams. The challenge will be to apply the method to events at longer regional distances where the seismic signals will include phases traveling in the upper mantle, and the acoustic signals will be recorded as infrasound signals, which are subject to atmospheric variability.

58 GEOSCIENCES↗

Deciphering the Stress State of Seismogenic Faults in Oklahoma and Southern Kansas Based on an Improved Stress Map

Fault location and geometry are prime considerations in the reactivation of preexisting faults. Here, we combine relocated earthquake catalogs and focal mechanisms to delineate seismogenic faults in Oklahoma and southern Kansas and analyze their stress state. Initially, we identify and map seismogenic faults based on earthquake clustering. We then obtain an improved stress map using 2,047 high-quality focal mechanisms. The regional stress map shows a gradual transition from oblique normal faulting in western Oklahoma to strike-slip faulting in central and eastern Oklahoma. Stress amplitude ratio shows a strong correlation with pore pressure from hydrogeologic models, suggesting that pore pressure exhibits a measurable influence on stress patterns. Finally, we assess fault stress state via 3-D Mohr circles; a parameter understress is used to quantify the level of fault criticality (with 0 meaning critically stressed faults and 1 meaning faults with no applied shear stress). Our findings suggest that most active faults have near vertical planes (planarity >0.8 and dip >70°), and there is a strong correlation between fault length and maximum magnitude on each fault. The fault trends show prominent conjugate sets that strike [55–75°] and [105–125°]. A comparison with mapped sedimentary faults and basement fractures reveals common tectonic control. Based on 3-D Mohr circles, we find that 78% of the faults are critically stressed (understress ≤0.2), while several seismogenic faults are misoriented with high understress (>0.4). Fault geometry and local stress fields may be used to evaluate potential seismic hazard, as the largest earthquakes tend to occur on long, critically stressed faults.

58 GEOSCIENCES↗

Topographical Controls on Hillslope-Scale Hydrology Drive Shrub Distributions on the Seward Peninsula, Alaska

Observations indicate shrubs are expanding across the Arctic tundra, mainly on hillslopes and primarily in response to climate warming. However, the impact topography exerts on hydrology, nutrient dynamics, and plant growth can make untangling the mechanisms behind shrub expansion difficult. We examined the role topography plays in determining shrub expansion by applying a coupled transect version of a mechanistic ecosystem model (ecosys) in a tundra hillslope site in the Seward Peninsula, Alaska. Modeled biomass of the dominant plant functional types agreed well with field measurements (R 2 = 0.89) and accurately represented shrub expansion over the past 30 years inferred from satellite observations. In the well-drained crest position, canopy water potential and plant nitrogen (N) uptake was modeled to be low from plant and microbial water stress. Intermediate soil water content in the mid-slope position enhanced mineralization and plant N uptake, increasing shrub biomass. The deciduous shrub growth in the mid-slope position was further enhanced by symbiotic N 2 fixation primed by increased root carbon allocation. The gentle slope in the poorly drained lower-slope position resulted in saturated soil conditions that reduced soil O 2 concentrations, leading to lower root O 2 uptake and lower nutrient uptake and plant biomass. Additionally, a simulation that removed topographical interconnectivity between grid cells resulted in (1) a 28% underestimate of mean shrub biomass and (2) over or underestimated shrub productivity at the various hillslope positions. Our results indicate that land models need to account for hillslope-scale coupled surface and subsurface hydrology to accurately predict current plant distributions and future trajectories in Arctic ecosystems.

54 ENVIRONMENTAL SCIENCES↗

Reanalysis of Water Withdrawal for Irrigation, Electric Power, and Public Supply Sectors in the Conterminous United States, 1950–2016

Accurately measuring water use by the economy is essential for developing reliable models of water resource availability. Indeed, these models rely on retrospective analyses that provide insights into shifting human population demands and adaptions to water shortages. However, accurate, methodologically consistent, empirically authentic, and spatiotemporally comprehensive historical datasets for water withdrawals are scarce. Herein, we present a reanalysis of annual resolution (1950–2016) historical data set on irrigation, electric power, and public supply water withdrawal within the conterminous United States (US) at the county-level, and, for power plants, at the site-level. To estimate electric power water use, we synthesized a historically comprehensive list of generators and historic patterns in generation across fuels, prime movers, and cooling technologies. Irrigation water use estimation required building a crop-demand model that utilized historical information on irrigated acreage for crops and golf courses, stage-specific crop water demand, and climate information. To estimate public water supply use, we developed a random forest model constructed from information on population, infrastructure, climate, and land cover. These estimates generally agree with total county and state water use information provided by the US Geological Survey (USGS) water use circular and estimates generated from independent studies for specific years. However, we also observed discrepancies between our estimates and USGS data that appear to be caused by inconsistencies in the methods used by the USGS's primary data sources at the state level over decades of data collection, highlighting the importance of reanalysis to yield spatiotemporally consistent and intercomparable estimates of water use.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Refine your search to explore more results.