Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Electrostatic Origins of CO 2 -Increased Hydrophilicity in Carbonate Reservoirs

Injecting CO 2 into oil reservoirs appears to be cost-effective and environmentally friendly due to decreasing the use of chemicals and cutting back on the greenhouse gas emission released. However, there is a pressing need for new algorithms to characterize oil/brine/rock system wettability, thus better predict and manage CO 2 geological storage and enhanced oil recovery in oil reservoirs. We coupled surface complexation/CO 2 and calcite dissolution model, and accurately predicted measured oil-on-calcite contact angles in NaCl and CaCl 2 solutions with and without CO 2 . Contact angles decreased in carbonated water indicating increased hydrophilicity under carbonation. Lowered salinity increased hydrophilicity as did Ca 2+ . Hydrophilicity correlates with independently calculated oil-calcite electrostatic bridging. The link between the two may be used to better implement CO 2 EOR in fields.

Science & Technology - Other Topics↗

An investigation of the long-range and local structure of sub-stoichiometric zirconium carbide sintered at different temperatures

ZrC 1-x (sub-stoichiometric zirconium carbide), a group IV transition metal carbide, is being considered for various high temperature applications. Departure from stoichiometry changes the thermo-physical response of the material. Reported thermo-physical properties exhibit, in some cases, a degree of scatter with one likely contributor to this being the uncertainty in the C/Zr ratio of the samples produced. Conventional, methods for assigning C/Zr to samples are determined either by nominal stochiometric ratios or combustion carbon analysis. In this study, a range of stoichiometries of hot-pressed ZrC 1-x were examined by SEM, XRD, Raman spectroscopy and static 13 C NMR spectroscopy and used as a basis to correct the C/Zr. Graphite, amorphous, and ZrC 1-x carbon signatures are observed in the 13 C NMR spectra of samples and are determined to vary in intensity with sintering temperature and stoichiometry. In this study a method is outlined to quantify the stoichiometry of ZrC 1-x and free carbon phases, providing an improvement over the sole use and reliance of widely adopted bulk carbon combustion analysis. We report significantly lower C/Zr values determined by 13 C NMR analysis compared with carbon analyser and nominal methods. Furthermore, the location of carbon disassociated from the ZrC 1-x structure is analysed using SEM and Raman spectroscopy.

36 MATERIALS SCIENCE↗

Microstructure and properties of additively manufactured Al–Ce–Mg alloys

Additive manufacturing of aluminum alloys is largely dominated by a near-eutectic Al-Si compositions, which are highly weldable, but have mechanical properties that are not competitive with conventional wrought Al alloys. In addition, there is a need for new Al alloys with improved high temperature properties and thermal stability for applications in the automotive and aerospace fields. In this work, we considered laser powder bed fusion additive manufacturing of two alloys in the Al–Ce–Mg system, designed as near-eutectic (Al–11Ce–7Mg) and hyper-eutectic (Al–15Ce–9Mg) compositions with respect to the binary L → Al + Al 11 Ce eutectic reaction. The addition of magnesium is used to promote solid solution strengthening. A custom laser scan pattern was used to reduce the formation of keyhole porosity, which was caused by excessive vaporization due to the high vapor pressure of magnesium. The microstructure and tensile mechanical properties of the alloys were characterized in the as-fabricated condition and following hot isostatic pressing. The two alloys exhibit significant variations in solidification structure morphology. These variations in non-equilibrium solidification structure were rationalized using a combination of thermodynamic and thermal modeling. Both alloys showed higher yield strength than AM Al-10Si-Mg for temperatures up to 350 °C and better strength retention at elevated temperatures than additively manufactured Scalmaloy.

36 MATERIALS SCIENCE↗

Dark matter halo mass functions and density profiles from mass and energy cascade

Abstract Halo abundance and structure play a central role for modeling structure formation and evolution. Without relying on a spherical or ellipsoidal collapse model, we analytically derive the halo mass function and cuspy halo density (inner slope of −4/3) based on the mass and energy cascade theory in dark matter flow. The hierarchical halo structure formation leads to halo or particle random walk with a position-dependent waiting time $$\tau _g$$ τ g . First, the inverse mass cascade from small to large scales leads to the halo random walk in mass space with $$\tau _g\propto m_h^{-\lambda }$$ τ g ∝ m h - λ , where $$m_h$$ m h is the halo mass and $$\lambda$$ λ is a halo geometry parameter with predicted value of 2/3. The corresponding Fokker-Planck solution for halo random walk in mass space gives rise to the halo mass function with a power-law behavior on small scale and exponential decay on large scale. This can be further improved by considering two different $$\lambda$$ λ for haloes below and above a critical mass scale $$m_h^*$$ m h ∗ , i.e. a double- $$\lambda$$ λ halo mass function. Second, a double- $$\gamma$$ γ density profile can be derived based on the particle random walk in 3D space with a position-dependent waiting time $$\tau _g \propto \Phi (r)^{-1} \propto r^{-\gamma }$$ τ g ∝ Φ ( r ) - 1 ∝ r - γ , where $$\Phi$$ Φ is the gravitational potential and r is the particle distance to halo center. Theory predicts $$\gamma =2/3$$ γ = 2 / 3 that leads to a cuspy density profile with an inner slope of −4/3, consistent with the predicted scaling laws from energy cascade. The Press-Schechter mass function and Einasto density profile are just special cases of proposed models. The small scale permanence can be identified due to the scale-independent rate of mass and energy cascade, where density profiles of different halo masses and redshifts converge to the $$-4/3$$ - 4 / 3 scaling law ( $$\rho _h \propto r^{-4/3}$$ ρ h ∝ r - 4 / 3 ) on small scales. Theory predicts the halo number density scales with halo mass as $$\propto m_h^{-1.9}$$ ∝ m h - 1.9 , while the halo mass density scales as $$\propto m_h^{4/9}$$ ∝ m h 4 / 9 . Results were compared against the Illustris simulations. This new perspective provides a theory for nearly universal halo mass functions and density profiles.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantitative assessment of Ni + and He + ion irradiation damage in a tungsten heavy alloy under the simulated nuclear fusion environment

A 90W-7Ni-3Fe (wt.%) tungsten heavy alloy has been sequentially Ni + and He + ion irradiated at 700 °C to simulate the high temperature irradiation environment of a fusion reactor interior. W/Ni–Fe-W dual-phase alloys have been proposed to serve as plasma facing materials and require detailed investigation of their behavior under fusion relevant conditions to assess their overall applicability. To evaluate material performance under five years of simulated fusion reactor service, microstructural characterization of the nanoscale defect distribution has been performed on both constituent phases, revealing peak swelling in the W phase of approximately 0.03%. The γ-phase (Ni–Fe-W) is found to swell approximately 0.68% under the same irradiation conditions, indicating significant cavity formation and growth. Additionally, a novel multi-projection imaging approach has been applied to determine the extent of damage segregation along the dual-phase W-to-γ interface and exposes that these interfaces act as sink sites for the accumulation of cavities. Interphase boundaries are noted to possess an 11.8% areal coverage of defects along the boundary plane, primarily on the γ-phase side of the boundary. The accumulation of cavities at these interphase boundaries is anticipated to adversely affect overall material toughness, and this work reveals a pressing need for mechanical property testing of irradiated W–Ni-Fe dual-phase alloys.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Floquet engineering of Kitaev quantum magnets

Abstract In recent years, there has been an intense search for materials realizing the Kitaev quantum spin liquid model. A number of edge-shared compounds with strong spin-orbit coupling, such as RuCl 3 and iridates, have been proposed to realize this model. Nevertheless, an effective spin Hamiltonian derived from the microscopic model relevant to these compounds generally contains terms that are antagonistic toward the quantum spin liquid. This is consistent with the fact that the zero magnetic field ground state of these materials is generally magnetically ordered. It is a pressing issue to identify protocols to drive the system to the limit of the Kitaev quantum spin model. In this work, we propose Floquet engineering of these Kitaev quantum magnets by coupling materials to a circularly polarized laser. We demonstrate that all the magnetic interactions can be tuned in situ by the amplitude and frequency of the laser, hence providing a route to stabilize the Kitaev quantum spin liquid phase.

36 MATERIALS SCIENCE↗

Single-cell stable isotope probing in microbial ecology

Abstract Environmental and host-associated microbiomes are typically diverse assemblages of organisms performing myriad activities and engaging in a network of interactions that play out in spatially structured contexts. As the sum of these activities and interactions give rise to overall microbiome function, with important consequences for environmental processes and human health, elucidating specific microbial activities within complex communities is a pressing challenge. Single-cell stable isotope probing (SC-SIP) encompasses multiple techniques that typically utilize Raman microspectroscopy or nanoscale secondary ion mass spectrometry (NanoSIMS) to enable spatially resolved tracking of isotope tracers in cells, cellular components, and metabolites. SC-SIP techniques are uniquely suited for illuminating single-cell activities in microbial communities and for testing hypotheses about cellular functions generated for example from meta-omics datasets. Here, we illustrate the insights enabled by SC-SIP techniques by reviewing selected applications in microbiology and offer a perspective on their potential for future research.

Alcolombri, Uria (ORCID:0000000335615091)↗

The hidden costs of concealing outdoor air conditioning units

The beautification of urban facades in China often includes covers for the outdoor units of air conditioners. Although these covers improve cityscapes, they reduce cooling efficiency, increase noise pollution, risk system failures and embody carbon emissions. A call urges rethinking their necessity, and presses for sustainable, efficient design to counteract extreme heat.

Wang, Wei↗

Quantum Hooke's Law to classify pulse laser induced ultrafast melting

Ultrafast crystal-to-liquid phase transition induced by femtosecond pulse laser excitation is an interesting material's behavior manifesting the complexity of light-matter interaction. There exist two types of such phase transitions: one occurs at a time scale shorter than a picosecond via a nonthermal process mediated by electron-hole plasma formation; the other at a longer time scale via a thermal melting process mediated by electron-phonon interaction. However, it remains unclear what material would undergo which process and why? Here, by exploiting the property of quantum electronic stress (QES) governed by quantum Hooke's law, we classify the transitions by two distinct classes of materials: the faster nonthermal process can only occur in materials like ice having an anomalous phase diagram characterized with dT m /dP < 0, where T m is the melting temperature and P is pressure, above a high threshold laser fluence; while the slower thermal process may occur in all materials. Especially, the nonthermal transition is shown to be induced by the QES, acting like a negative internal pressure, which drives the crystal into a “super pressing” state to spontaneously transform into a higher-density liquid phase. Our findings significantly advance fundamental understanding of ultrafast crystal-to-liquid phase transitions, enabling quantitative a priori predictions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrahard stitching of nanotwinned diamond and cubic boron nitride in C 2 -BN composite

Materials combining the hardness and strength of diamond with the higher thermal stability of cubic boron nitride (cBN) have broad potential value in science and engineering. Reacting nanodiamond with cBN at moderate pressures and high temperatures provides a pathway to such materials. Here we report the fabrication of C x -BN nanocomposites, measuring up to 10 mm in longest dimension, by reacting nanodiamond with pre-synthesized cBN in a large-volume press. The nanocomposites consist of randomly-oriented diamond and cBN domains stitched together by sp 3 -hybridized C-B and C-N bonds, leading to p-type semiconductivity. Dislocations near the sutures accommodate lattice mismatch between diamond and cBN. Nanotwinning within both diamond and cBN domains further contributes to a bulk hardness ~50% higher than sintered cBN. We find the nanocomposite of C 2 -BN exhibits p-type semiconductivity with low activation energy and high thermal stability, making it a functional,ultrahard substance.

36 MATERIALS SCIENCE↗

A new class of inhibitors of the AraC family virulence regulator

Vibrio cholerae is responsible for the diarrheal disease cholera that infects millions of people worldwide. While vaccines protecting against cholera exist, and oral rehydration therapy is an effective treatment method, the disease will remain a global health threat until long-term solutions such as improved sanitation and access to clean water become widely available. Because of this, there is a pressing need for potent therapeutics that can either mitigate cholera symptoms, or act prophylactically to prevent the virulent effects of a cholera infection. Here we report the design, synthesis, and characterization of a set of compounds that bind and inhibit ToxT, the transcription factor that directly regulates the two primary V. cholerae virulence factors. Using the folded structure of the monounsaturated fatty acid observed in the X-ray structure of ToxT as a template, we designed ten novel compounds that inhibit the virulence cascade to a greater degree than any known inhibitor. Our findings provide a structural and functional basis for the development of viable antivirulence therapeutics that combat cholera and, potentially, other forms of bacterial pathogenic disease.

Science & Technology - Other Topics↗

Studies on the Bi 2 Te 3 –Bi 2 Se 3 –Bi 2 S 3 system for mid-temperature thermoelectric energy conversion

Bismuth telluride (Bi 2 Te 3 ) and its alloys have been widely investigated as thermoelectric materials for cooling applications at around room temperature. We report here a systematic study on many compounds in the Bi 2 Te 3 –Bi 2 Se 3 –Bi 2 S 3 system. All the samples were fabricated by high energy ball milling followed by hot pressing. Among the investigated compounds, Bi 2 Te 2 S 1 shows a peak ZT ~0.8 at 300 °C and Bi 2 Se 1 S 2 ~0.8 at 500 °C. The results show that these compounds can be used for mid-temperature power generation applications. The leg efficiency of thermoelectric conversion for segmented elements based on these n-type materials could potentially reach 12.5% with a cold side at 25 °C and a hot side at 500 °C if appropriate p-type legs are paired, which could compete well with the state-of-the-art n-type materials within the same temperature range, including lead tellurides, lead selenides, lead sulfides, filled-skutterudites, and half Heuslers.

30 DIRECT ENERGY CONVERSION↗

Hierarchically structured TiO 2 for Ba-filled skutterudite with enhanced thermoelectric performance

The influence of hierarchical TiO 2 inclusions on electrical and thermal transport properties has been investigated in the Ba-filled skutterudite compound Ba 0.3 Co 4 Sb 12 synthesized by ball milling followed by hot pressing. The hierarchical TiO 2 , with the morphology of nanocrystallite aggregates, was prepared using a carbon sphere-templated method. It was found that TiO 2 inclusions strongly enhance the Seebeck coefficient while they weakly degrade the electric conductivity. In addition, TiO 2 inclusions reduce significantly the lattice thermal conductivity through all-scale length phonon scattering due to the hierarchically-structured TiO 2 particles. ZT values up to 1.2 were obtained for Ba 0.3 Co 4 Sb 12 with an optimal amount and dispersion of TiO 2 inclusions. These observations reported here demonstrate an exciting scientific opportunity to raise the figure-of-merit of filled skutterudites via hierarchical dispersion.

36 MATERIALS SCIENCE↗

New mechanistic insight into the oxygen reduction reaction on Ruddlesden–Popper cathodes for intermediate-temperature solid oxide fuel cells

Ruddlesden–Popper (R–P) phase materials have been investigated widely as cathode candidates for IT-SOFCs. However, widespread application of R–P phase cathodes demands further improvement in electrode activity whose progress is hindered by the limited information in the oxygen reduction reaction (ORR). The ORR mechanism for the R–P phase is therefore investigated in this paper using (LaSr) 2 NiO 4±δ as an example. Accurate characterization of the surface oxygen exchange process is realized by developing thin and dense polycrystalline LSNO layers via a versatile spray-modified pressing method we invented before to avoid perceptible bulk diffusion contribution, surface enrichment and geometry complication. Hence, the governing factors of the ORR are identified as oxygen adsorption and incorporation based on the findings in reaction orders from electrochemical impedance spectroscopy (EIS), stoichiometry-related chemical capacitance and intrinsic anisotropic properties.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A quantitative and spatially resolved analysis of the performance-bottleneck in high efficiency, planar hybrid perovskite solar cells

Hybrid perovskites represent a potential paradigm shift for the creation of low-cost solar cells. Current power conversion efficiencies (PCEs) exceed 22%. However, despite this, record PCEs are still far from their theoretical Shockley–Queisser limit of 31%. To increase these PCE values, there is a pressing need to understand, quantify and microscopically model charge recombination processes in full working devices. Here, we present a complete microscopic account of charge recombination processes in high efficiency (18–19% PCE) hybrid perovskite (mixed cation and methylammonium lead iodide) solar cells. We employ diffraction-limited optical measurements along with relevant kinetic modeling to establish, for the first time, local photoluminescence quantum yields, trap densities, trapping efficiencies, charge extraction efficiencies, quasi-Fermi-level splitting, and effective PCE estimates. Correlations between these spatially resolved parameters, in turn, allow us to conclude that intrinsic electron traps in the perovskite active layers limit the performance of these state-of-the-art hybrid perovskite solar cells.

14 SOLAR ENERGY↗

Unusual infrared absorption increases in photo-degraded organic films

Degradation is among the most pressing problems facing organic materials, occurring through ingress of moisture and oxygen, and light exposure. We determine the nanoscale pathways underlying degradation by light-soaking organic films in an environmental chamber, and performing infrared spectroscopy, to identify atomic bonding changes. We utilize as a prototype the low band gap PTB7-PCBM blend. Films light-soaked in the presence of oxygen show unusual increased absorption at 1727 cm –1 attributable to increased C=O modes, and a broad increase at 3240 cm –1 attributable to hydroxyl (O–H) groups bonded within the organic matrix. Films exposed to oxygen in the dark, or light-soaked in an inert atmosphere, do not exhibit significant absorption changes, suggesting simultaneous exposure of oxygen and light that creates singlet excited oxygen is the detrimental factor. Our ab initio electronic structure simulations interpret these by oxidation at the α-C site of the alkyl chains in PTB7, with an irreversible rupture of the alkyl chain and formation of new C=O and C–O–H conformations at the α-C. Infrared spectroscopy coupled with ab initio simulation can provide a powerful tool for quantifying photo-structural atomic bonding changes. As a result, understanding nanoscale light-induced structural changes will open avenues to designing more stable organic materials for organic electronics.

36 MATERIALS SCIENCE↗

Synthesis, transport properties and electronic structure of p-type Cu 1+x Mn 2–x InTe 4 ( x = 0, 0.2, 0.3)

The synthesis, electronic structure and temperature dependent transport properties of polycrystalline Cu 1+x Mn 2–x InTe 4 (x = 0, 0.2, 0.3) are reported for the first time. These quaternary chalcogenides were synthesized by direct reaction of the elements, followed by solid state annealing and hot press densification. The thermal conductivity is low for all specimens and intrinsic to the material system. Furthermore, the off-stoichiometry specimens illustrate the sensitivity of the transport properties to stoichiometry, with a greater than two-orders-of magnitude increase in carrier concentration with increased Cu content. First principles calculations of the electronic structure are also reported, and are in agreement with the experimental data. Here, this fundamental investigation shows the potential towards further optimization of the electrical properties that, in addition to the intrinsically low thermal conductivity, provides a basis for further research into the viability of this material system for potential energy-related applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New chemistry for enhanced carbon capture: beyond ammonium carbamates

Carbon capture and sequestration is necessary to tackle one of the biggest problems facing society: global climate change resulting from anthropogenic carbon dioxide (CO 2 ) emissions. Despite this pressing need, we still rely on century-old technology—aqueous amine scrubbers—to selectively remove CO 2 from emission streams. Amine scrubbers are effective due to their exquisite chemoselectivity towards CO 2 to form ammonium carbamates and (bi)carbonates, but suffer from several unavoidable limitations. In this perspective, we highlight the need for CO 2 capture via new chemistry that goes beyond the traditional formation of ammonium carbamates. In particular, we demonstrate how ionic liquid and metal–organic framework sorbents can give rise to capture products that are not favourable for aqueous amines, including carbamic acids, carbamate–carbamic acid adducts, metal bicarbonates, alkyl carbonates, and carbonic acids. These new CO 2 binding modes may offer advantages including higher sorption capacities and lower regeneration energies, though additional research is needed to fully explore their utility for practical applications. Overall, we outline the unique challenges and opportunities involved in engineering new CO 2 capture chemistry into next-generation technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Refine your search to explore more results.