Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOSPHORUS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Materials Data on As2PHBr3F11 by Materials Project

PHBr3As2F11 is beta-prime cadmium gold structured and crystallizes in the monoclinic P2_1/m space group. The structure is zero-dimensional and consists of two phosphorus tribromide molecules and two As2F11 clusters. In each As2F11 cluster, there are two inequivalent As4+ sites. In the first As4+ site, As4+ is bonded to six F1- atoms to form corner-sharing AsF6 octahedra. The corner-sharing octahedral tilt angles are 35°. There is five shorter (1.76 Å) and one longer (1.90 Å) As–F bond length. In the second As4+ site, As4+ is bonded to six F1- atoms to form corner-sharing AsF6 octahedra. The corner-sharing octahedral tilt angles are 35°. There are a spread of As–F bond distances ranging from 1.74–2.09 Å. There are eight inequivalent F1- sites. In the first F1- site, F1- is bonded in a single-bond geometry to one As4+ atom. In the second F1- site, F1- is bonded in a single-bond geometry to one As4+ atom. In the third F1- site, F1- is bonded in a single-bond geometry to one As4+ atom. In the fourth F1- site, F1- is bonded in a single-bond geometry to one As4+ atom. In the fifth F1- site, F1- is bonded in a single-bond geometry to one As4+ atom. In the sixth F1- site, F1- is bonded in a bent 150 degrees geometry to two As4+ atoms. In the seventh F1- site, F1- is bonded in a single-bond geometry to one As4+ atom. In the eighth F1- site, F1- is bonded in a single-bond geometry to one As4+ atom.

36 MATERIALS SCIENCE↗

Materials Data on Re2P3N2(Cl5O)3 by Materials Project

(RePNOCl6)2POCl3 crystallizes in the triclinic P-1 space group. The structure is zero-dimensional and consists of four phosphorus oxychloride molecules and two RePNOCl6 clusters. In one of the RePNOCl6 clusters, there are two inequivalent Re6+ sites. In the first Re6+ site, Re6+ is bonded to two N3-, one O2-, and three Cl1- atoms to form distorted ReN2Cl3O octahedra that share a cornercorner with one PCl3O tetrahedra. There is one shorter (1.72 Å) and one longer (2.04 Å) Re–N bond length. The Re–O bond length is 2.38 Å. There are one shorter (2.31 Å) and two longer (2.33 Å) Re–Cl bond lengths. In the second Re6+ site, Re6+ is bonded in a 6-coordinate geometry to two N3-, one O2-, and three Cl1- atoms. There is one shorter (1.71 Å) and one longer (2.01 Å) Re–N bond length. The Re–O bond length is 2.55 Å. There are a spread of Re–Cl bond distances ranging from 2.31–2.34 Å. There are two inequivalent P5+ sites. In the first P5+ site, P5+ is bonded to one O2- and three Cl1- atoms to form PCl3O tetrahedra that share a cornercorner with one ReN2Cl3O octahedra. The corner-sharing octahedral tilt angles are 27°. The P–O bond length is 1.49 Å. There is two shorter (1.99 Å) and one longer (2.00 Å) P–Cl bond length. In the second P5+ site, P5+ is bonded in a tetrahedral geometry to one O2- and three Cl1- atoms. The P–O bond length is 1.49 Å. There is two shorter (1.99 Å) and one longer (2.00 Å) P–Cl bond length. There are two inequivalent N3- sites. In the first N3- site, N3- is bonded in a linear geometry to two Re6+ atoms. In the second N3- site, N3- is bonded in a linear geometry to two Re6+ atoms. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted bent 150 degrees geometry to one Re6+ and one P5+ atom. In the second O2- site, O2- is bonded in a distorted single-bond geometry to one Re6+ and one P5+ atom. There are twelve inequivalent Cl1- sites. In the first Cl1- site, Cl1- is bonded in a single-bond geometry to one Re6+ atom. In the second Cl1- site, Cl1- is bonded in a single-bond geometry to one P5+ atom. In the third Cl1- site, Cl1- is bonded in a single-bond geometry to one P5+ atom. In the fourth Cl1- site, Cl1- is bonded in a single-bond geometry to one P5+ atom. In the fifth Cl1- site, Cl1- is bonded in a single-bond geometry to one Re6+ atom. In the sixth Cl1- site, Cl1- is bonded in a single-bond geometry to one Re6+ atom. In the seventh Cl1- site, Cl1- is bonded in a single-bond geometry to one Re6+ atom. In the eighth Cl1- site, Cl1- is bonded in a single-bond geometry to one P5+ atom. In the ninth Cl1- site, Cl1- is bonded in a single-bond geometry to one P5+ atom. In the tenth Cl1- site, Cl1- is bonded in a single-bond geometry to one P5+ atom. In the eleventh Cl1- site, Cl1- is bonded in a single-bond geometry to one Re6+ atom. In the twelfth Cl1- site, Cl1- is bonded in a single-bond geometry to one Re6+ atom. In one of the RePNOCl6 clusters, there are two inequivalent Re6+ sites. In the first Re6+ site, Re6+ is bonded to two N3-, one O2-, and three Cl1- atoms to form distorted ReN2Cl3O octahedra that share corners with two equivalent ReN2Cl3O octahedra and a cornercorner with one PCl3O tetrahedra. The corner-sharing octahedra tilt angles range from 4–8°. There is one shorter (1.71 Å) and one longer (2.01 Å) Re–N bond length. The Re–O bond length is 2.42 Å. There are a spread of Re–Cl bond distances ranging from 2.32–2.34 Å. In the second Re6+ site, Re6+ is bonded to two N3-, one O2-, and three Cl1- atoms to form distorted ReN2Cl3O octahedra that share corners with two equivalent ReN2Cl3O octahedra and a cornercorner with one PCl3O tetrahedra. The corner-sharing octahedra tilt angles range from 4–8°. There is one shorter (1.71 Å) and one longer (2.02 Å) Re–N bond length. The Re–O bond length is 2.40 Å. There are one shorter (2.32 Å) and two longer (2.33 Å) Re–Cl bond lengths. There are two inequivalent P5+ sites. In the first P5+ site, P5+ is bonded to one O2- and three Cl1- atoms to form PCl3O tetrahedra that share a cornercorner with one ReN2Cl3O octahedra. The corner-sharing octahedral tilt angles are 27°. The P–O bond length is 1.49 Å. There is two shorter (1.99 Å) and one longer (2.00 Å) P–Cl bond length. In the second P5+ site, P5+ is bonded to one O2- and three Cl1- atoms to form PCl3O tetrahedra that share a cornercorner with one ReN2Cl3O octahedra. The corner-sharing octahedral tilt angles are 22°. The P–O bond length is 1.48 Å. There is one shorter (1.99 Å) and two longer (2.00 Å) P–Cl bond length. There are two inequivalent N3- sites. In the first N3- site, N3- is bonded in a linear geometry to two Re6+ atoms. In the second N3- site, N3- is bonded in a linear geometry to two Re6+ atoms. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted single-bond geometry to one Re6+ and one P5+ atom. In the second O2- site, O2- is bonded in a 1-coordinate geometry to one Re6+ and one P5+ atom. There are twelve inequivalent Cl1- sites. In the first Cl1- site, Cl1- is bonded in a single-bond geometry to one Re6+ atom. In the second Cl1- site, Cl1- is bonded in a single-bond geometry to one Re6+ atom. In the third Cl1- site, Cl1- is bonded in a single-bond geometry to one Re6+ atom. In the fourth Cl1- site, Cl1- is bonded in a single-bond geometry to one P5+ atom. In the fifth Cl1- site, Cl1- is bonded in a single-bond geometry to one Re6+ atom. In the sixth Cl1- site, Cl1- is bonded in a single-bond geometry to one P5+ atom. In the seventh Cl1- site, Cl1- is bonded in a single-bond geometry to one P5+ atom. In the eighth Cl1- site, Cl1- is bonded in a single-bond geometry to one P5+ atom. In the ninth Cl1- site, Cl1- is bonded in a single-bond geometry to one Re6+ atom. In the tenth Cl1- site, Cl1- is bonded in a single-bond geometry to one Re6+ atom. In the eleventh Cl1- site, Cl1- is bonded in a single-bond geometry to one P5+ atom. In the twelfth Cl1- site, Cl1- is bonded in a single-bond geometry to one P5+ atom.

36 MATERIALS SCIENCE↗

Materials Data on BPBr6 by Materials Project

BBr3PBr3 is Ammonia-derived structured and crystallizes in the orthorhombic Pnma space group. The structure is zero-dimensional and consists of four boron tribromide molecules and four phosphorus tribromide molecules.

36 MATERIALS SCIENCE↗

Materials Data on PBr3O by Materials Project

POBr3 is beta Np structured and crystallizes in the orthorhombic Pna2_1 space group. The structure is zero-dimensional and consists of four phosphorus oxybromide molecules. P5+ is bonded in a distorted tetrahedral geometry to one O2- and three Br1- atoms. The P–O bond length is 1.48 Å. There are two shorter (2.20 Å) and one longer (2.21 Å) P–Br bond lengths. O2- is bonded in a single-bond geometry to one P5+ atom. There are three inequivalent Br1- sites. In the first Br1- site, Br1- is bonded in a single-bond geometry to one P5+ atom. In the second Br1- site, Br1- is bonded in a distorted single-bond geometry to one P5+ atom. In the third Br1- site, Br1- is bonded in a single-bond geometry to one P5+ atom.

36 MATERIALS SCIENCE↗

AmeriFlux US-ABc Archbold grazed improved pasture

This is the AmeriFlux version of the carbon flux data for the site US-ABc Archbold grazed improved pasture. Site Description - This site is an improved pasture, regularly fertilized (nitrogen, ~26 kg/ha every 2 years) and limed (~229 kg/ha every 5 years, and historically received phosphorus fertilizer until 1986; . The soil type is a fine sandy Spodosol

Bernacchi, Carl [Global Change and Photosynthesis ↗

AmeriFlux US-ABd Archbold ungrazed improved pasture

This is the AmeriFlux version of the carbon flux data for the site US-ABd Archbold ungrazed improved pasture. Site Description - This site is an improved pasture, regularly fertilized (nitrogen, ~26 kg/ha every 2 years) and limed (~229 kg/ha every 5 years; and historically received phosphorus fertilizer until 1986; . The soil type is a fine sandy Spodosol . Grazing was removed in 2013-2015 for the duration of the study

Bernacchi, Carl [Global Change and Photosynthesis ↗

AmeriFlux FLUXNET-1F US-ABc Archbold grazed improved pasture

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-ABc Archbold grazed improved pasture. This is the FLUXNET version of the carbon flux data for the site US-ABc Archbold grazed improved pasture produced by applying the standard ONEFlux (1F) software. Site Description - This site is an improved pasture, regularly fertilized (nitrogen, ~26 kg/ha every 2 years) and limed (~229 kg/ha every 5 years, and historically received phosphorus fertilizer until 1986; . The soil type is a fine sandy Spodosol

Bernacchi, Carl [Global Change and Photosynthesis ↗

AmeriFlux FLUXNET-1F US-ABd Archbold ungrazed improved pasture

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-ABd Archbold ungrazed improved pasture. This is the FLUXNET version of the carbon flux data for the site US-ABd Archbold ungrazed improved pasture produced by applying the standard ONEFlux (1F) software. Site Description - This site is an improved pasture, regularly fertilized (nitrogen, ~26 kg/ha every 2 years) and limed (~229 kg/ha every 5 years; and historically received phosphorus fertilizer until 1986; . The soil type is a fine sandy Spodosol . Grazing was removed in 2013-2015 for the duration of the study

Bernacchi, Carl [Global Change and Photosynthesis ↗

A global perspective on wetland salinization: ecological consequences of a growing threat to freshwater wetlands

Salinization, a widespread threat to the structure and ecological functioning of inland and coastal wetlands, is currently occurring at an unprecedented rate and geographic scale. The causes of salinization are diverse and include alterations to freshwater flows, land-clearance, irrigation, disposal of wastewater effluent, sea level rise, storm surges, and applications of de-icing salts. Climate change and anthropogenic modifications to the hydrologic cycle are expected to further increase the extent and severity of wetland salinization. Salinization alters the fundamental physicochemical nature of the soil-water environment, increasing ionic concentrations and altering chemical equilibria and mineral solubility. Increased concentrations of solutes, especially sulfate, alter the biogeochemical cycling of major elements including carbon, nitrogen, phosphorus, sulfur, iron, and silica. The effects of salinization on wetland biogeochemistry typically include decreased inorganic nitrogen removal (with implications for water quality and climate regulation), decreased carbon storage (with implications for climate regulation and wetland accretion), and increased generation of toxic sulfides (with implications for nutrient cycling and the health/functioning of wetland biota). Indeed, increased salt and sulfide concentrations induce physiological stress in wetland biota and ultimately can result in large shifts in wetland communities and their associated ecosystem functions. The productivity and composition of freshwater species assemblages will be highly altered, and there is a high potential for the disruption of existing interspecific interactions. Although there is a wealth of information on how salinization impacts individual ecosystem components, relatively few studies have addressed the complex and often non-linear feedbacks that determine ecosystem-scale responses or considered how wetland salinization will affect landscape-level processes. Although the salinization of wetlands may be unavoidable in many cases, these systems may also prove to be a fertile testing ground for broader ecological theories including (but not limited to): investigations into alternative stable states and tipping points, trophic cascades, disturbance-recovery processes, and the role of historical events and landscape context in driving community response to disturbance.

54 ENVIRONMENTAL SCIENCES↗

Rare earths recovery and gypsum upgrade from Florida phosphogypsum

Phosphogypsum is a byproduct created during the production of industrial wet-process phosphoric acid. This study focused on recovering rare earth elements (REEs) from a Florida phosphogypsum sample and investigated the effects of removing detrimental impurities such as phosphorus pentoxide (P 2 O 5 ), uranium (U) and fluorine (F) during the leaching process. Experimental results indicated that REE leaching efficiency increased rapidly, reached a maximum and then began to decrease with sulfuric acid concentrations ranging from 0 to 10 percent and temperatures ranging from 20 to 70 °C. At a sulfuric acid concentration of 5 percent and leaching temperature of 50 °C, REE leaching efficiency obtained a maximum value of approximately 43 percent. Increasing the leaching time or liquid/solid ratio increased the leaching efficiency. The leaching efficiencies of P 2 O 5 , U and F consistently increased with sulfuric acid concentration, temperature, leaching time and liquid/solid ratio within the testing ranges. A fine-grain gypsum concentrate, sized smaller than 40 μm, was separated from leached phosphogypsum through elutriation, in which the P 2 O 5 , U and F content levels were reduced by 99, 70 and 83 percent, respectively, from their content levels in fresh phosphogypsum.

58 GEOSCIENCES↗

Effect of filter media thickness on the performance of sand drying beds used for faecal sludge management

Here the effect of sand filter media thickness on the performance of faecal sludge (FS) drying beds was determined in terms of: dewatering time, contaminant load removal efficiency, solids generation rate, nutrient content and helminth eggs viability in the dried sludge. A mixture of ventilated improved pit latrine sludge and septage in the ratio 1:2 was dewatered using three pilot-scale sludge drying beds with sand media thicknesses of 150, 250 and 350 mm. Five dewatering cycles were conducted and monitored for each drying bed. Although the 150 mm filter had the shortest average dewatering time of 3.65 days followed by 250 mm and 350 mm filters with 3.83 and 4.02 days, respectively, there was no significant difference (p > 0.05) attributable to filter media thickness configurations. However, there was a significant difference for the percolate contaminant loads in the removal and recovery efficiency of suspended solids, total solids, total volatile solids, nitrogen species, total phosphorus, chemical oxygen demand, dissolved chemical oxygen demand and biochemical oxygen demand, with the highest removal efficiency for each parameter achieved by the 350 mm filter. There were also significant differences in the nutrient content (NPK) and helminth eggs viability of the solids generated by the tested filters. Finally, filtering media configurations similar to 350 mm have the greatest potential for optimising nutrient recovery from FS.

54 ENVIRONMENTAL SCIENCES↗

RENEWABLE ENERGY AND ENVIRONMENTAL SUSTAINABILITY USING BIOMASS FROM DAIRY AND BEEF ANIMAL PRODUCTION

The Texas Panhandle is regarded as the "Cattle Feeding Capital of the World", producing 42% of the fed beef cattle in the United States within a 200-mile radius of Amarillo generating more than 5 million tons of feedlot manure /year. Apart from feedlots, the Bosque River Region in Erath County, just north of Waco, Texas with about 110,000 dairy cattle in over 250 dairies, produces 1.8 million tons of manure biomass (excreted plus bedding) per year. While the feedlot manure has been used extensively for irrigated and dry land crop production, most dairies, as well as other concentrated animal feeding operations (CAFO's), the dairy farms utilize large lagoon areas to store wet animal biomass. Water runoff from these lagoons has been held responsible for the increased concentration of phosphorus and other contaminates in the Bosque River which drains into Lake Waco—the primary source of potable water for Waco's 108,500 people. The concentrated animal feeding operations may lead to land, water, and air pollution if waste handling systems and storage and treatment structures are not properly managed. Manure-based biomass (MBB) has the potential to be a source of green energy at large coal-fired power plants and on smaller-scale combustion systems at or near confined animal feeding operations. Although MBB particularly cattle biomass (CB) is a low quality fuel with an inferior heat value compared to coal and other fossil fuels, the concentration of it at large animal feeding operations can make it a viable source of fuel. The overall objective of this interdisciplinary proposal is to develop environmentally benign technologies to convert low-value inventories of dairy and beef cattle biomass into renewable energy. Current research expands the suite of technologies by which cattle biomass (CB: manure, and premature mortalities) could serve as a renewable alternative to fossil fuel. The work falls into two broad categories of research and development. Category 1 – Renewable Energy Conversion. This category addressed mostly in volume I involves developing. Thermo-chemical conversion technologies including cofiring with coal, reburn to reduce nitrogen oxide (NO, N2O, NOx, etc.) and Hg emissions and gasification to produce low-BTU gas for on-site power production in order to extract energy from waste streams or renewable resources. Category 2 – Biomass Resource Technology. This category, addressed mostly in Volume II, deals with the efficient and cost-effective use of CB as a renewable energy source (e.g. through and via aqueous-phase, anaerobic digestion or biological gasification). The investigators formed an industrial advisory panel consisting fuel producers (feedlots and dairy farms) and fuel users (utilities), periodically met with them, and presented the research results; apart from serving as dissemination forum, the PIs used their critique to red-direct the research within the scope of the tasks. The final report for the 5 to 7 year project performed by an interdisciplinary team of 9 professors is arranged in three volumes: Vol. I (edited by Kalyan Annamalai) addressing thermo-chemical conversion and direct combustion under Category 1 and Vol. II and Vol. III ( edited by J M Sweeten) addressing biomass resource Technology under Category 2. Various tasks and sub-tasks addressed in Volume I were performed by the Department of Mechanical Engineering (a part of TEES; see Volume I), while other tasks and sub-tasks addressed in Volume II and IIII were conducted by Texas AgriLife Research at Amarillo; the TAMU Biological & Agricultural Engineering Department (BAEN) College Station; and West Texas A&M University (WTAMU) (Volumes II and III). The three volume report covers the following results: fuel properties of low ash and high ash CB (particularly DB) and MB (mortality biomass and coals, non-intrusive visible infrared (NVIR) spectroscopy techniques for ash determination, dairy energy use surveys at 14 dairies in Texas and California, cofiring of low quality CB with high quality coal, emission results and ash fouling behavior, using CB as reburn fuel for NOx and Hg reduction, gasification of fuels to produce low quality gases, modeling of reburn, pilot scale test results, synthesis of engineering characterization, geographical mapping, a transportation cost study to determine potential handling and transportation systems for co-firing with coal at regional coal-fired power plants, software analyses for the design of off-site manure, pre-processing and storage systems for a typical dairy farm or beef cattle feedlot, recursive production functions/systems models for both cattle feedlots, systems modeling, stocks and flows of energy involved in the CAFO system, feedback from an Industry Advisory Committee (IAC) to the investigators on project direction and task emphasis and economics of using CB as cofiring and reburn fuel.

09 BIOMASS FUELS↗

RENEWABLE ENERGY AND ENVIRONMENTAL SUSTAINABILITY USING BIOMASS FROM DAIRY AND BEEF ANIMAL PRODUCTION

The Texas Panhandle is regarded as the "Cattle Feeding Capital of the World", producing 42% of the fed beef cattle in the United States within a 200-mile radius of Amarillo generating more than 5 million tons of feedlot manure/year. Apart from feedlots, the Bosque River Region in Erath County, just north of Waco, Texas with about 110,000 dairy cattle in over 250 dairies, produces 1.8 million tons of manure biomass (excreted plus bedding) per year. While the feedlot manure has been used extensively for irrigated and dry land crop production, most dairies, as well as other concentrated animal feeding operations (CAFO's), the dairy farms utilize large lagoon areas to store wet animal biomass. Water runoff from these lagoons has been held responsible for the increased concentration of phosphorus and other contaminates in the Bosque River which drains into Lake Waco -- the primary source of potable water for Waco's 108,500 people. The concentrated animal feeding operations may lead to land, water, and air pollution if waste handling systems and storage and treatment structures are not properly managed. Manure-based biomass (MBB) has the potential to be a source of green energy at large coal-fired power plants and on smaller-scale combustion systems at or near confined animal feeding operations. Although MBB particularly cattle biomass (CB) is a low quality fuel with an inferior heat value compared to coal and other fossil fuels, the concentration of it at large animal feeding operations can make it a viable source of fuel. The overall objective of this interdisciplinary proposal is to develop environmentally benign technologies to convert low-value inventories of dairy and beef cattle biomass into renewable energy. Current research expands the suite of technologies by which cattle biomass (CB: manure, and premature mortalities) could serve as a renewable alternative to fossil fuel. The work falls into two broad categories of research and development. Category 1 -- Renewable Energy Conversion. This category addressed mostly in volume I involves developing. Thermo-chemical conversion technologies including cofiring with coal, reburn to reduce nitrogen oxide (NO, N2O, NOx, etc.) and Hg emissions and gasification to produce low-BTU gas for on-site power production in order to extract energy from waste streams or renewable resources. Category 2 -- Biomass Resource Technology. This category, addressed mostly in Volume II, deals with the efficient and cost-effective use of CB as a renewable energy source (e.g. through and via aqueous-phase, anaerobic digestion or biological gasification). The investigators formed an industrial advisory panel consisting fuel producers (feedlots and dairy farms) and fuel users (utilities), periodically met with them, and presented the research results; apart from serving as dissemination forum, the PIs used their critique to re-direct the research within the scope of the tasks. The final report for the 5 to 7 year project performed by an interdisciplinary team of 9 professors is arranged in three volumes: Vol. I (edited by Kalyan Annamalai) addressing thermo-chemical conversion and direct combustion under Category 1 and Vol. II and Vol. III ( edited by J M Sweeten) addressing biomass resource Technology under Category 2. Various tasks and sub-tasks addressed in Volume I were performed by the Department of Mechanical Engineering (a part of TEES; see Volume I), while other tasks and sub-tasks addressed in Volume II and IIII were conducted by Texas AgriLife Research at Amarillo; the TAMU Biological & Agricultural Engineering Department (BAEN) College Station; and West Texas A&M University (WTAMU) (Volumes II and III). The three volume report covers the following results: fuel properties of low ash and high ash CB (particularly DB) and MB (mortality biomass and coals, non-intrusive visible infrared (NVIR) spectroscopy techniques for ash determination, dairy energy use surveys at 14 dairies in Texas and California, cofiring of low quality CB with high quality coal, emission results and ash fouling behavior, using CB as reburn fuel for NOx and Hg reduction, gasification of fuels to produce low quality gases, modeling of reburn, pilot scale test results, synthesis of engineering characterization, geographical mapping, a transportation cost study to determine potential handling and transportation systems for co-firing with coal at regional coal-fired power plants, software analyses for the design of off-site manure, pre-processing and storage systems for a typical dairy farm or beef cattle feedlot, recursive production functions/systems models for both cattle feedlots, systems modeling, stocks and flows of energy involved in the CAFO system, feedback from an Industry Advisory Committee (IAC) to the investigators on project direction and task emphasis and economics of using CB as cofiring and reburn fuel.

01 COAL, LIGNITE, AND PEAT↗

Prompt Gamma Analysis of Hanford 3013 Containers. Final Report

Prompt gamma analysis was completed on 1,947 oxide and 310 metal Hanford 3013 containers. This report discusses the method used to analyze the gamma-ray spectra for the 3013 containers and determine the light element impurities present in the material and their respective concentrations. The light elements sensitive to this method include aluminum, beryllium, boron, chlorine, fluorine, magnesium, phosphorus, potassium and sodium. The results from the analyses are used to link the containers to representative materials in the MIS program whose storage behavior is known. The results are also used to place containers in surveillance bins based on their expected behavior in storage. The results indicate definite trends between the impurities detected and the material’s process history. However, unexpected impurities were found in some process groups suggesting that the material is not well characterized by process history in all cases. In addition, it was found that the spectrum names were incorrectly assigned to the data files due to an electronics issue. Therefore, spectrum name corrections were made to 258 containers Hanford data set, and the effect of those changes on container representation are also discussed.

Mgmt Of Radioactive & Non-radioactive Wastes from ↗

Evaluation of Solar Grade Silicon Produced by the Institute of Physics and Technology (CRADA Final Report)

NREL and Solar Power Industries will cooperate to evaluate technology for producing solar grade silicon from industrial waste of the phosphorus industry, as developed by the Institute of Physics and Technology (IPT), Kazakhstan. Evaluation will have a technical component to assess the material quality and a business component to assess the economics of the IPT process. The total amount of silicon produced by IPT is expected to be quite limited (50 kg), so evaluations will need to be done on relatively small quantities (≈ 5 kg/sample).

14 SOLAR ENERGY↗

PINS Spectrum Identification Guide

The Portable Isotopic Neutron Spectroscopy—PINS, for short—system identifies the chemicals inside munitions and containers without opening them, a decided safety advantage if the fill chemical is a hazardous substance like a chemical warfare agent or an explosive. The PINS Spectrum Identification Guide is intended as a reference for technical professionals responsible for the interpretation of PINS gamma-ray spectra. The guide is divided into two parts. The three chapters that constitute Part I cover the science and technology of PINS. Neutron activation analysis is the focus of Chapter 1. Chapter 2 explores PINS hardware, software, and related operational issues. Gamma-ray spectral analysis basics are introduced in Chapter 3. The six chapters of Part II cover the identification of PINS spectra in detail. Like the PINS decision tree logic, these chapters are organized by chemical element: phosphorus-based chemicals, chlorine-based chemicals, etc. These descriptions of hazardous, toxic, and/or explosive chemicals conclude with a chapter on the identification of the inert chemicals, e.g. sand, used to fill practice munitions.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Engineering Ralstonia eutropha for Production of Isobutanol (IBT) Motor Fuel from Carbon Dioxide, Hydrogen, and Oxygen Project Final Report

This research project is a collaboration between the Sinskey laboratory at MIT and the Worden laboratory at Michigan State University. The goal of the project is to produce Isobutanol (IBT), a branched-chain alcohol that can serve as a drop-in transportation fuel, through the engineered microbial biosynthesis of Carbon Dioxide, Hydrogen, and Oxygen using a novel bioreactor. This final technical report presents the findings of both the biological engineering work at MIT that extended the native branched-chain amino acid pathway of the wild type Ralstonia eutropha H16 to perform this biosynthesis, as well as the unique design, modeling, and construction of a bioreactor for incompatible gasses at Michigan State that enabled the operational testing of the complete system. This 105 page technical report summarizing the three years of research includes 72 figures and 11 tables of findings. Ralstonia eutropha (also known as Cupriavidus necator) is a Gram-negative, facultatively chemolithoautotrophic bacteria. It has been the principle organism used for the study of polyhydroxybutyrate (PHB) polymer biosynthesis. The wild-type Ralstonia eutropha H16 produces PHB as an intracellular carbon storage material while under nutrient stress in the presence of excess carbon. Under this stress, it can accumulate approximately 80 % of its cell dry weight (CDW) as this intracellular polymer. With the restoration of the required nutrients, the cells are then able to catabolize this polymer. If extracted from the cell, this PHB polymer can be processed into biodegradable and biocompatible plastics, however for this research, it is the efficient metabolic pathway channeling the captured carbon that is of interest. R. eutropha is further unique in that it contains two carbon-fixation Calvin–Benson–Bassham cycle operons, two oxygen-tolerant hydrogenases, and several formate dehydrogenases. It has also been much studied for its ability in the presence of oxygen, to fix carbon dioxide into complex cellular molecules using the energy from hydrogen. In this research project, engineered strains of R. eutropha redirected the excess carbon from PHB storage into the production of isobutanol and 3-methyl-1-butanol (branched-chain higher alcohols). These branched-chain higher alcohols can be used directly as substitutes for fossil-based fuels and are seen as alternative biofuels to ethanol and biodiesel. Importantly, these alcohols have approximately 98 % of the energy content of gasoline, 17 % higher than the current gasoline additive ethanol, without impacting corn market production for feed or food. Unlike ethanol, these branched-chain alcohols have low vapor pressure, hygroscopicity, and water solubility, which make them readily compatible with the existing pipelines, gasoline pumps, and engines in our transportation infrastructure. While the use of alternative energies from solar, wind, geothermal, and hydroelectric has spread for stationary power applications, these energy sources cannot be effectively or efficiently employed in current or future transportation systems. With the ongoing concerns of fossil fuel availability and price stability over the long term, alternative biofuels like branched-chain higher alcohols hold promise as a suitable transportation fuel in the future. We showed in our research that various mutant strains of R. eutropha with isobutyraldehyde dehydrogenase activity, in combination with the overexpression of plasmid-borne, native branched-chain amino acid biosynthesis pathway genes and the overexpression of heterologous ketoisovalerate decarboxylase gene, would produce isobutanol and 3-methyl-1-butanol when initiated during nitrogen or phosphorus limitation. Early on, we isolated one mutant R. eutropha strain which produced over 180 mg/L branched-chain alcohols in flask culture while being more tolerant of isobutanol toxicity. After the targeted elimination of genes encoding several potential carbon sinks (ilvE, bkdAB, and aceE), the production titer of the improved to 270 mg/L isobutanol and 40 mg/L 3-methyl-1-butanol. Semicontinuous flask cultivation supplied the cells with sufficient nutrients while minimizing the toxicity caused by isobutanol. Under this cultivation, the R. eutropha mutant grew and produced more than 14 g/L branched-chain alcohols over the duration of 50 days. These results demonstrate that R. eutropha carbon flux can be redirected from PHB to branched-chain alcohols and that engineered R. eutropha can be cultivated over prolonged periods of time for product biosynthesis. While this bioengineering work was being done at the Sinskey laboratory at MIT, the researchers at the Worden laboratory at Michigan State were working on the design and construction of the required specialty bioreactor for incompatible gasses (BIG) that would allow the safe feeding of microbes on Carbon Dioxide, Hydrogen, and Oxygen without explosive results. The early design and assembly work in year 1 incorporated a novel microbubble generator to maximize the bioavailability of gasses within the system comprised of small scale hollow fiber reactors. The early success of the microbubble generator eliminated the need to investigate potentially toxic surfactants within the system. For operational control, the system design incorporated a Opto22-based control network. The researchers also selected the specific hollow fiber material suitable for the bioreactor application. A variety of commercially available hollow fiber membranes were compared with regard to their pore sizes, cell affinity, and potential interference to cell viability assays. The selected membrane with its spongy layer was then tested for diffusivity of O2 and CO2. The instrumented system was then fully assembled for experimentally measuring the heterotrophic growth rate of immobilized R. eutropha cells. The requisite procedures for inoculation, measurement, and cleaning were established enabling the system performance to be validated under controlled laboratory conditions. In year 2, the researchers completed the Opto22 based cross-platform control network, and the system’s communications across the Sartorius fermentation system and Bruker gas chromatograph was established via open platform communications (OPC) protocol. Using the revised system, measurements were taken of the R.eutropha cell growth rate and substrate mass transfer rate in the hollow fiber membrane. Several IBT recovery strategies were explored and resin adsorption was determined to be optimal solution for lab scale operations. The adsorption capacity of the resin column was then measured and IBT desorption using methanol has been demonstrated. With the growing body of experimental data in hand, mathematical models were constructed to demonstrate and map the cellular kinetics, mass transfer of heterotrophic and autotrophic substrates in the hollow fiber, and the adsorption process in the resin column. A structured kinetic model was constructed to describe the competition between cell mass generation and IBT production. The reactor was then scaled up from single fiber to a membrane area of 180 cm2 and then further to 1 ft2. In Year 3 of the research, the IBT mass transfer across the membrane was characterized within the system with experiments to empirically measure the IBT diffusion coefficient in the BIG spongy layer. Using the refined mathematical models, the researchers are now able to explain the experimental observations and predict bioreactor performance under a wide range of experimental conditions. The Big system is able to demonstrate continuous controlled operations with the integrated IBT recovery system. Both heterotrophic and autotrophic production have been shown during continuous operation with heterotrophic and autotrophic stages. Performance of BIG system has been measured during continuous run with alternating heterotrophic growth on fructose and autotrophic product formation on H2, CO2, and O2. Volumetric productivities of IBT at 325 mg/(L day) and of 3M1B at 50 mg/(L day) were achieved, which were comparable to that achieved under heterotrophic conditions. Using the mathematical model, researchers are able to predict system performance for scaled-up BIG system. The apparent diffusion coefficient of IBT in the spongy layer of XM-50 hollow fiber membranes has been measured at various lumen liquid flow rates. The experiment is simulated in COMSOL to validate the results. The constructed COMSOL model is able to simulate BIG system performance in both batch and continuous mode. Mathematical simulations of the system performance have been run to identify the most crucial operational conditions, identifying the rate-limiting factors in autotrophic production of IBT, and quantitating the rate of IBT catabolism. Investigations of the productivity of the production system have suggested and the modeling of the system has revealed a particular sensitivity to the catabolism of the produced IBT by the engineered R. eutropha. Experiments have been designed and executed to quantify the IBT catabolism of R. eutropha, which open up possibilities for further system improvements through future, targeted bioengineering of the strain. Finally, the researchers at Michigan State performed an economic analysis of the system, based on the collective results, and their findings are presented in full within the report.

08 HYDROGEN↗

Synthesis and Exploratory Catalysis of 3d Metals: Group-Transfer Reactions, and the Activation and Functionalization of Small Molecules Including Greenhouse Gases

Our work over the past three years has resulted in the development of electron rich and low-coordinate vanadium fragments, molecular nitrides of vanadium and parent imide systems of titanium, and the synthesis of phosphorus containing molecules of the 3d transition metal series. Likewise, with financial support from BES Division in DOE (DE-FG02-07ER15893), we now completed the full characterization of the first single molecular magnet (SMM) of Fe(III). We demonstrated that this monomeric form of Fe(III) has an unusual slow relaxation of the magnetization under zero applied field. To make matters more interesting, this system also undergoes a rare example of an intermediate to high-spin transition (an S = 3/2 to S = 5/2 transition). In 2010 we reported the synthesis of the first neutral and low-coordinate vanadium complexes having the terminal nitride functionality. We have now completed a full study to understand formation of the nitride ligand from the metastable azide precursor, and have also explored the reactivity of the nitride ligand in the context of incomplete and complete N-atom transfer. During the 2010-2013 period we also discovered a facile approach to assemble low-coordinate and low-valent vanadium(II) complexes and exploit their multielectron chemistry ranging from 1-3 electrons. Consequently, we can now access 3d ligand frameworks such as cyclo-P3 (and its corresponding radical anion), nitride radical anions and cations, low-coordinate vanadium oxo’s, and the first example of a vanadium thionitrosyl complex. A cis-divacant iron(IV) imido having some ligand centered radical has been also discovered, and we are in the process of elucidating its electronic structure (in particular the sign of zero field splitting and the origin of its magnitude), bonding and reactivity. We have also revisited some paramagnetic and classic metallocene compounds with S >1/2 ground states in order to understand their reactivity patterns and electronic structure. Lastly, we are completing the synthesis and characterization of a titanium nitride anion and formation of the first example of boryl and aluminyl imido titanium complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Refine your search to explore more results.