Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Electroplating hard magnetic SmCo for magnetic microactuator applications

Patterned SmCo thin films were electroplated from an aqueous solute containing glycine by using dc and pulse dc current on the beaker level. Micromolds prepared by photolithography allow an accurate pattern transfer for patterned deposition of the material. A flux guide of a magnetic microactuator was chosen as a pattern, and Al{sub 2}O{sub 3} was used as the substrate. Au and Cr were investigated as seed layer materials. The content of Sm in the SmCo films is strongly dependent on the applied cathodic current density. A relative Sm content of up to 13.8 at. % could be determined by energy dispersive x-ray (EDX) spectroscopy. The SmCo thin films were annealed at 560 deg. C in a vacuum oven. Vibrating sample magnetometer (VSM) measurements were applied to characterize the magnetic properties. This film features hard magnetic properties with an intrinsic coercivity H{sub ci} of up to 44 kA/m. Electron probe microanalysis (EPMA) measurements showed that up to 40 at. % of O may be integrated in these films. The phases in the deposited films were determined by applying X-ray diffraction (XRD) measurements. These films consist of a mixture of SmCo alloy, Sm oxide, and Co.

36 MATERIALS SCIENCE↗

Exchange Coupling in MnAlC/α-Fe Nanocomposite Magnets

Nanostructured composite materials consisting of exchange-coupled hard and soft magnetic phases are proposed as alternative for the development of high-energy product permanent magnets. In this work, we have examined the effects of soft magnetic α-Fe addition on the structure and magnetic properties of powders composed of hard magnetic Mn{sub 54.3}Al{sub 44}C{sub 1.7} compound. The optimum melt-spun ribbon precursor (with τ-phase structure, with magnetization of 88 emu/g and coercive field of 1.6 kOe) was obtained after annealing the ribbons at 500 {sup ∘}C for 20 min. After the combination between the soft and the optimized hard phase, the intensity of τ-phase peaks measured by X-ray diffraction decreases. These changes can also be seen in the magnetic properties. The coercivity (∼ 500 Oe) tends to decrease with the annealing temperature, while the magnetization tends to increase up to 141 emu/g. Evidence of good exchange coupling between particles of Mn{sub 54.3}Al{sub 44}C{sub 1.7} and α-Fe, in the produced composite, was proved by the hysteresis loop and its corresponding Thamm-Hesse analysis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

LDRD-LW Final Report: 07-LW-041 "Magnetism in Semiconductor Nanocrystals: New Physics at the Nanoscale"

The work conducted in this project was conducted with the aim of identifying and understanding the origin and mechanisms of magnetic behavior in undoped semiconductor nanocrystals (NCs), specifically those composed of CdSe. It was anticipated that the successful completion of this task would have the effect of addressing and resolving significant controversy over this topic in the literature. Meanwhile, application of the resultant knowledge was expected to permit manipulation of the magnetic properties, particularly the strength of any magnetic effects, which is of potential relevance in a range of advanced technologies. More specifically, the project was designed and research conducted with the goal of addressing the following series of questions: (1) How does the magnitude of the magnetism in CdSe NCs change with the organic molecules used to passivate their surface the NC size? i.e. Is the magnetism an intrinsic effect in the nanocrystalline CdSe (as observed for Au NCs) or a surface termination driven effect? (2) What is the chemical (elemental) nature of the magnetism? i.e. Are the magnetic effects associated with the Cd atoms or the Se atoms or both? (3) What is/are the underlying mechanism(s)? (4) How can the magnetism be controlled for further applications? To achieve this goal, several experimental/technical milestones were identified to be fulfilled during the course of the research: (A) The preparation of well characterized CdSe NCs with varying surface termination (B) Establishing the extent of the magnetism of these NCs using magnetometry (particularly using superconducting interference device [SQUID]) (C) Establishing the chemical nature of the magnetism using x-ray magnetic circular dichroism (XMCD) - the element specific nature of the technique allows identification of the element responsible for the magnetism (D) Identification of the effect of surface termination on the empty densities of states (DOS) using x-ray absorption spectroscopy (XAS), with particular emphasis on elucidating small changes in the d-electron count. Characterizing changes in the d-electron density can yield important insight into the mechanisms of magnetism in materials. As the three attached manuscripts illustrate (presented in preprint form to ensure no infringement of copyright), each of these milestones was successfully illustrated and the results published in the scientific literature during the course of the project. The research team members were able to determine, from a series of XAS, XMCD and SQUID magnetometry measurements, that CdSe NCs are paramagnetic and that the magnitude of magnetic susceptibility is dependent upon the type of organic molecule used to passivate the NC surface (i.e. the observed magnetism results, at least in part, from a surface effect that is not intrinsic to the NCs). In addition, they identified that the mechanism by which the magnetic susceptibility is modified - via {pi} back-donation of d-electrons to the organic ligands from the Cd atoms. These findings demonstrate that the magnetic properties are related to the surface Cd atoms and illustrate the means by which the magnetic behavior can be manipulated for specific technological applications. Two of the papers published during the course of the LW project do not contain magnetometry data, but focus on the evolution in electronic structure of the CdSe NCs as a function of particle size. These measurements were crucial in developing an understanding of the electronic behavior of the NCs and, ultimately, in assigning the p back-donation mechanism for inducing controllable paramagnetic behavior. Significantly, the research team has also filed a patent application based upon their research: 'Method for Creating Ligand Induced Paramagnetism in Nanocrystalline Structures' Docket: IL-11858. It is noted that both LDRD-LW and Office of Basic Energy Sciences (OBES) funding is acknowledged in the attached manuscripts. As such, is important to indicate that funds were not comingled during the course of the project. Some of the experimental data presented in the manuscripts was collected prior to the LDRD-LW award by Dr. Meulenberg and Dr. Lee, who were supported by an OBES award at the time. This data was, in part, used by Dr. Meulenberg in his proposal/presentation for the LDRD-LW competition. Moreover, the vast majority of data presented in the three papers was collected at OBES-funded synchrotron facilities which necessitated an acknowledgement to OBES.

36 MATERIALS SCIENCE↗

Synthesis of low core loss Finemet/Ni0.5Zn0.5Fe2O4 composites by co-precipitation method

Highlights: • Finemet/NiZn ferrite composites were synthesized by co-precipitation method. • Magnetic properties can be adjusted by controlling oxygen partial pressure. • It shows lower core loss about 30.5 mW/cm{sup 3} at 100 kHz and 100 mT. - Abstract: Finemet/Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} core/shell structure composites have been prepared by a co-precipitation method followed by a high temperature sintering process. The formation mechanism of the core/shell structures and the effects of oxygen partial pressure during the sintering process on the phase structure, microstructure, and magnetic properties were discussed. Low and high oxygen partial pressures resulted in the formation of crystal defects and a reduction of the magnetic properties of the composites. The magnetic properties could be adjusted by controlling the oxygen partial pressure and the optimal magnetic properties of the composites were obtained by sintering under an oxygen partial pressure of 10%. The resulting composite exhibited a high permeability of 61, a high saturation magnetization of 135.5 emu/g and a low core loss of approximately 30.5 mW/cm{sup 3} at 100 kHz and 100 mT.

36 MATERIALS SCIENCE↗

Combined effect of chemical pressure and valence electron concentration through the electron-deficient Li substitution on the RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr, and Sm) system

Four members of the RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr, and Sm) system have been prepared by high-temperature reaction method and characterized by X-ray diffractions. All compounds crystallize in the orthorhombic Gd{sub 5}Si{sub 4}-type structure (space group Pnma, Pearson code oP16) with bonding interactions for interslab Ge{sub 2} dimers. The Li substitution for rare-earth elements in the RE{sub 4}LiGe{sub 4} system leads to a combined effect of the increased chemical pressure and the decreased valance electron concentration (VEC), which eventually results in the structure transformation from the Sm{sub 5}Ge{sub 4}-type with all broken interslab Ge–Ge bond for the parental RE{sub 5}Ge{sub 4} to the Gd{sub 5}Si{sub 4}-type structure for the ternary RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr, and Sm) system. Site-preference between rare-earth metals and Li is proven to generate energetically the most favorable atomic arrangements according to coloring-problem, and the rationale is provided using both the size-factor and the electronic-factor related, respectively, to site-volume and electronegativity as well as QVAL values. Tight-binding, linear-muffin-tin-orbital (TB-LMTO) calculations are performed to investigate electronic densities of states (DOS) and crystal orbital Hamilton population (COHP) curves. The influence of reduced VEC for chemical bonding including the formation of interslab Ge{sub 2} dimers is also discussed. The magnetic property measurements prove that the non-magnetic Li substitution leads to the ferromagnetic (FM)-like ground state for Ce{sub 4}LiGe{sub 4} and the co-existence of antiferromagntic (AFM) and FM ground states for Sm{sub 4}LiGe{sub 4}. - Graphical abstract: Reported is a combined effect of the chemical pressure and the reduced VEC caused by the smaller monovalent non-magnetic Li substitution for the larger trivalent magnetic rare-earth metals in the RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr, and Sm) system. This results in the structure transformation from the Sm{sub 5}Ge{sub 4}-type to the Gd{sub 5}Si{sub 4}-type structure and the changes in magnetic properties. Display Omitted - Highlights: • Four Li-containing intermetallic compounds RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr and Sm) were synthesized. • The combined effect of the chemical pressure and the reduced VEC caused by Li substitution for a rare-earth metal results in the structure transformation. • Electronic structures and magnetic properties of title compounds were thoroughly investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced magnetic behaviors of CoPt nanoparticles by addition of SiO{sub 2}

Equiatomic L1{sub 0} CoPt alloy nanoparticles (NPs) with various contents of SiO{sub 2} are synthesized by the simple sol–gel method. The SiO{sub 2} additions restrain the growth of grain and hinder the agglomeration formation. The coercivity increases first and then decreases with SiO{sub 2} addition. Compared to the 0 μl-SiO{sub 2} CoPt NPs, the higher ordering degree and better magnetic properties are obtained by the addition of amount 10 μl SiO{sub 2} in our sample. And the coercivity is two times as large as that of 0 μl-SiO{sub 2} NPs. When the addition of SiO{sub 2} is more than 10 μl, the deteriorated magnetic properties are ascribed to the transformation from hard magnetically phase to soft magnetically phase due to the decrease of particle size. - Graphical abstract: L1{sub 0} CoPt alloy nanoparticles with various contents of SiO{sub 2} are synthesized by sol–gel method. The effects of SiO{sub 2} on the structure and magnetic properties of CoPt nanoparticles are investigated. - Highlights: • The L1{sub 0} CoPt–SiO{sub 2} nanoparticles (NPs) were synthesized by sol–gel method. • Effects of SiO{sub 2} content on the structure and magnetic properties were investigated. • The addition of SiO{sub 2} restrained the growth of particle size. • CoPt–10 μl SiO{sub 2} NPs showed a higher ordering degree and better magnetic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nuclear magnetic resonance properties of lunar samples.

Nuclear magnetic resonance spectra of Na-23, Al-27, and P-31 in fines samples 10084,60 and 14163,168 and in crystalline rock samples 12021,55 and 14321,166, have been recorded over a range of frequencies up to 20 MHz. A shift in the field at which maximum absorption occurs for all of the spectra relative to the field at which maximum absorption occurs for terrestrial analogues is attributed to a sample-dependent magnetic field at the Na, Al, and P sites opposing the laboratory field. The magnitude of these fields internal to the samples is sample dependent and varies from 5 to 10 G. These fields do not correlate with the iron content of the samples. However, the presence of single-domain particles of iron distributed throughout the plagioclase fraction that contains the principal fraction of Na and Al is inferred from electron magnetic resonance spectra shapes.

Kline, D.↗

Size and grain morphology dependent magnetic behaviour of Co-doped ZnO

Highlights: {yields} Structure and magnetic studies on Co-doped ZnO. {yields} Synthesis method dependent comparison of magnetic properties. {yields} Grain size and morphology affect the magnetic properties of Co-doped ZnO. -- Abstract: We have carried out a comparative study of structural, microstructural and magnetic properties of the two sets of Co-doped ZnO samples synthesized using solid state reaction and sol-gel method. Rietveld refinement of the X-ray diffraction data reveals single phase hexagonal wurtzite structure for all the samples, while the tunnelling electron microscopy measurements show the presence of nano-phase in the sol-gel grown Co-doped ZnO samples. It is found that, the microstructure strongly depends on the synthesis method adopted. Samples with higher Co-concentration synthesized by SSR route exhibit antiferromagnetism while SG grown Co-doped ZnO samples exhibit weak ferromagnetic behaviour. Improved magnetic phase in the SG grown samples has been attributed to the grain morphology.

36 MATERIALS SCIENCE↗

Optical properties of magnetic photonic crystals with an arbitrary magnetization orientation

We have studied the peculiarities of diffraction of light in magnetic photonic crystals at large values of magnetooptical activity parameter and modulation depth. We have considered the case of an arbitrary angle between the directions of the external static magnetic field and the normal to the layer. The problem has been solved by the modified Ambartsumyan layer summation method. It has been shown that the given system is nonreciprocal with respect to not only circular, but linear polarizations also. In this case, a new type of nonreciprocity is observed (namely, the relation R(α) ≠ R(–α) holds, where R is the reflection coefficient and α is the angle of incidence). It has been demonstrated that in the case of oblique incidence, there appears a new photonic forbidden band that is not selective relative to the polarization of incident light. We have detected strong dependences of reflectance, absorbance, transmittance nonreciprocity, and other characteristics on the angle between the direction of the external static magnetic field and the normal to the layer boundary. Such a system can be used as a controllable polarization filter and a mirror, as well as a source of circular (elliptic) polarization, a controllable optical diode, and so on.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum Phase Engineering of Two-Dimensional Post-Transition Metals by Substrates: Toward a Room-Temperature Quantum Anomalous Hall Insulator

In this work, we propose a new strategy to engineer topological and magnetic properties of two-dimensional (2D) hexagonal lattices consisting of post-transition metals. Our first-principles calculations demonstrate that substrates serve as templates to form 2D lattices with high thermodynamic stability, where their topological properties as well as magnetic properties sensitively change as a function of lattice constants, i.e., the system undergoes a first-order phase transition from nonmagnetic to ferromagnetic state above a critical lattice constant. Consequently, substrates can be used to explore versatile magnetic, electronic, and quantum topological properties. We establish phase diagrams of versatile quantum phases in terms of exchange coupling and spin–orbit coupling effectively tuned by the lattice constants. We further reveal the first room-temperature quantum anomalous Hall (QAH) effect, i.e., Sn on 2√3 × 2√3 graphane is a QAH insulator with a large spin–orbit coupling gap of ~0.2 eV and a Curie temperature of ~380 K by using the 2D anisotropic Heisenberg model.

36 MATERIALS SCIENCE↗

Magnetosynthesis Effect on the Structure and Ground State of Cu 2+ -Based Antiferromagnets

Synthetic variables can have an outsized influence on the crystal structure and magnetic properties of a material, particularly those of quantum materials. In this work, we investigate the impact of synthesis under a magnetic field (magnetosynthesis) on the crystal structure and magnetic properties of several Cu 2+ (S = 1/2)-based materials with antiferromagnetic interactions and varying levels of magnetic frustration, from simple antiferromagnets to a quantum spin liquid. Here, we develop methods to apply small (0.09–0.37 T) magnetic fields during low-temperature hydrothermal, evaporative, and rehydration syntheses of the simple antiferromagnet CuCl 2 ·2H 2 O, the canted antiferromagnet (Cu,Zn) 3 Cl 4 (OH) 2 ·2H 2 O, the frustrated and canted antiferromagnet atacamite Cu 2 (OH) 3 Cl, and the highly frustrated quantum spin liquid herbertsmithite Cu 3 Zn(OH) 6 Cl 2 . We report the first single-crystal X-ray structural determination of the Cu 3 Cl 4 (OH) 2 ·2H 2 O structure type and probe the stability of this phase both experimentally and computationally. Atacamite Cu 2 (OH) 3 Cl synthesized under a 0.19 T field experiences a 0.15 K (∼3%) decrease in its Néel transition temperature. This result suggests that magnetosynthesis with small applied fields may have a very subtle influence upon the magnetic properties of moderately magnetically frustrated 3 d materials.

36 MATERIALS SCIENCE↗

Preparation and characterization of bifunctional dendrimer modified Fe{sub 3}O{sub 4}/CdTe nanoparticles with both luminescent and superparamagnetic properties

Highlights: • The fluorescent superparamagnetic dendrimeric Fe{sub 3}O{sub 4}/CdTe nanoparticles are synthesized in this paper. • The synthesized nanocomposites maintain excellent magnetic properties. • The synthesized nanocomposites maintain highly luminescent markers with narrow emission bands. - Abstract: Magnetic nanoparticles Fe{sub 3}O{sub 4} were prepared by hydrothermal coprecipitation of ferric and ferrous ions using NaOH. The surface modification of Fe{sub 3}O{sub 4} nanoparticle by dendrimers has rendered the nanoparticle surface with enriched amine groups which facilitated the adsorption and conjugation of thioglycolic acid (TGA) modified CdTe quantum dots to form a stable hybrid nanostructure. Three generations (first generation: G0F, second generation: G1F, third generation: G3F) of bifunctional dendrimeric Fe{sub 3}O{sub 4}/CdTe nanoparticles were successfully prepared using this technique and characterized by microscopy. The optical and magnetic properties of the dendrimeric Fe{sub 3}O{sub 4}/CdTe nanoparticle were also investigated. The microscopic study reveals 3 different sizes for 3 generations, 16 nm (G0F), 31 nm (G1F) and 47 nm (G3F). Among three generations of nanoparticles, the G1F has the best optical property with a luminescent quantum yield of 25.6% and the G0F has the best magnetic property with a saturation magnetization of 19.3 emμ/g.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Epitaxial patterning of nanometer-thick Y 3 Fe 5 O 12 films with low magnetic damping

Magnetic insulators such as yttrium iron garnet, Y 3 Fe 5 O 12 , with extremely low magnetic damping have opened the door for low power spin-orbitronics due to their low energy dissipation and effcient spin current generation and transmission. We demonstrate reliable and effcient epitaxial growth and nanopatterning of Y 3 Fe 5 O 12 thin-film based nanostructures on insulating Gd 3 Ga 5 O 12 substrates. In particular, our fabrication process is compatible with conventional sputtering and liftoff, and does not require aggressive ion milling which may be detrimental to the oxide thin films. Structural and magnetic properties indicate good qualities, in particular low magnetic damping of both films and patterned structures. The dynamic magnetic properties of the nanostructures are systematically investigated as a function of the lateral dimension. By comparing to ferromagnetic nanowire structures, a distinct edge mode in addition to the main mode is identified by both experiments and simulations, which also exhibits cross-over with the main mode upon varying the width of the wires. In conclusion, the non-linear evolution of dynamic modes over nanostructural dimensions highlights the important role of size confinement to their material properties in magnetic devices where Y 3 Fe 5 O 12 nanostructures serve as the key functional component.

36 MATERIALS SCIENCE↗

Magnetic and ferroelectric studies of double perovskite (KBi)(FeNb)O{sub 6} ceramics

This work describe the synthesis and characterization of the (KBi)(FeNb)O{sub 6} (KBFN) complex Perovskite. This compound has been structurally characterized by powder X-ray diffraction. The magnetic property of KBFN has been measured. The magnetic properties of (KBi)(FeNb)O{sub 6} is found to be a antiferromagnetically at temperature ranging from {approx}26K. The experimental results indicates that the magnetic moments of Fe{sup 3+} ion in (KBi)(FeNb)O{sub 6} order antiferromagnetically with a slight ferromagnetic moment below ca .26K and weak ferromagnetic moments disappears above ca. 26 K. The ferroelectric behaviour of polarization vs. applied electric field measurements were taken for the KBFN pellet. The shape of the curve are neither consistent with ferroelectric behaviour but rather indicative of conduction.

36 MATERIALS SCIENCE↗

Complex spin structure in co-trimer-chain Li 2 Co 3 Se 4 O 12

Complex magnetic materials are extremely attractive for revealing unconventional spin states and novel magnetic excitations. Here, we report the structural, thermodynamic, and magnetic properties of a novel magnetic material Li 2 Co 3 Se 4 O 12 based on x-ray and neutron diffraction, specific heat, magnetization, and x-ray photoelectron spectroscopy measurements. X-ray and neutron diffraction refinements reveal two Co sites Co (1) and Co (2) even though both are in the octahedral environment. While they are not connected along the b and c directions, these octahedra are edge-shared forming the Co (2) – Co (1) – Co (2) trimer chain along the a direction. The magnetic susceptibility exhibits the Curie-Weiss (CW) temperature dependence at high temperatures (above ∼50 K) with the negative CW temperature, a dip centered at T ⁎ ∼ 8.0 K, and an antiferromagnetic transition at T N = 3.3 K. The specific heat confirms that there is a phase transition at T N and a hump at T ⁎ . The long-range magnetic transition at T N implies that, in addition to the intra-chain interaction, there is strong inter-chain interaction, which is likely due to polarized SeO 3 bridging between chains. Single crystal neutron diffraction refinement reveals a complex magnetic structure with the angle between Co (1) and Co (2) moments ∼105°. Within the Co (2) – Co (1) – Co (2) trimer, two Co (2) moments are parallelly aligned. Surprisingly, the Co (1) moment (1.92μB) is only half of the Co (2) moment (3.96μB). There is likely the spin-state change for Co (1) from the high-spin state at T > T ⁎ to the low-spin state at T < T ⁎ , causing a dip in the magnetic susceptibility and a hump in the specific heat. When the magnetic field is applied, multiple metamagnetic transitions are found in all directions, implying field-driven magnetic excitations. Our results demonstrate rich magnetic properties of Li 2 Co 3 Se 4 O 12 that are sensitive to the external stimuli such as the magnetic field.

Antiferromagnetism↗

Delta undulator model: Magnetic field and beam test results

A novel type of in-vacuum Elliptical Polarization Undulator (EPU) magnet optimized for linac beam (Delta undulator) was developed at the Laboratory for Elementary-Particle Physics (LEPP) at Cornell University as part of insertion device development for the future Cornell 5 GeV Energy Recovery Source of coherent hard X-rays [1,7]. To evaluate mechanical, vacuum and magnetic properties of the magnet, a short 30 cm model with a 5 mm diameter round gap and a 2.4 cm period was built and tested in LEPP. The beam test of the Delta undulator model was conducted at Accelerator Test Facility (ATF) in BNL with {approx}60 MeV linac beam. The beam testing results confirmed basic properties of the undulator magnet obtained through the magnetic field measurement. In the paper we describe the magnet design, techniques and setups used for the magnetic field measurement and the beam testing results.

43 PARTICLE ACCELERATORS↗

The magnetic Rayleigh-Taylor instability for inviscid and viscous fluids

The Rayleigh-Taylor instability arises whenever two fluids with different densities are arranged such that the heavier fluid sits above the lighter fluid, with a sharp interface in between. The magnetic Rayleigh-Taylor instability has the further complication due to the presence of a magnetic field throughout both media. The two fluids in question may also have differing magnetic properties, such as the magnetic permeability. When the fluids in consideration are in fact plasmas comprised of charged particles, induced currents, magnetic fields, and Lorentz forces can all act in ways that will affect the stability of the system. Stable base flows exist for the 2D case, and small sinusoidal disturbances to the base flow will grow in the unstable scenario. The numerical method described in this paper calculates the growth of the interface in the nonlinear regime, since closed form solutions are obtained only in the linear approximation. Through the analysis of both the fluid and magnetic vorticities and streamfunctions, the simulated results can be explained from the principles of magnetohydrodynamics. A range of simulations is presented, looking at cases with different initial conditions, cases with strong and weak magnetic fields, and cases with magnetic fields oriented at different angles relative to the interface of the two fluids. It is shown in particular how different initial conditions give rise to outcomes that are very different in terms of the geometry of the interface between the two fluids, primarily the differences between a single mode disturbance and a multimode disturbance to the interface at time t = 0.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Additive Manufacturing of Isotropic NdFeB PPS Bonded Permanent Magnets

Extrusion based additive manufacturing of polymer composite magnets can increase the solid loading volume fraction with greater mechanical force through the printing nozzle as compared to traditional injection molding process. About 63 vol% of isotropic NdFeB magnet powders were compounded with 37 vol% of polyphenylene sulfide and bonded permanent magnets were fabricated while using Big Area Additive Manufacturing without any degradation in magnetic properties. The polyphenylene sulfide bonded magnets have a tensile stress of 20 MPa, almost double than that of nylon bonded permanent magnets. Additively manufactured and surface-protective-resin coated bonded magnets meet the industrial stability criterion of up to 175 °C with a flux-loss of 2.35% over 1000 h. They also exhibit better corrosion resistance behavior when exposed to acidic (pH = 1.35) solution for 24 h and also annealed at 80 °C over 100 h (at 95% relative humidity) over without coated magnets. Thus, polyphenylene sulfide bonded, additively manufactured, protective resin coated bonded permanent magnets provide better thermal, mechanical, and magnetic properties.

36 MATERIALS SCIENCE↗

Refine your search to explore more results.