Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Laboratory analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

An Initial Study of the Convergence Rate of Griffin’s Pebble Bed Reactors Algorithm

This paper presents an initial study of the convergence properties of an iterative algorithm for computing the burnup distribution in a pebble bed reactor (PBR) in its equilibrium core condition. The algorithm is implemented in the Griffin code. Griffin is a reactor multiphysics analysis application jointly developed by Idaho National Laboratory (INL) and Argonne National Laboratory (ANL). Griffin’s PBR algorithm is discussed and simulation data are presented. An alternative matrix formulation of the algorithm is presented that facilitates analysis of the iterative algorithm. The dependence of the spectral radius of the iterative algorithm on operational and discretization parameters is investigated.

97 MATHEMATICS AND COMPUTING↗

LDES-Sizing-and-siting-model (Power grid test cases for long-duration energy storage (LDES) siting) [SWR-25-75]

This repository contains code and data for performing a siting analysis of long-duration energy storage (LDES) in the 5-bus and RTS systems using the Sienna suite developed by the National Renewable Energy Laboratory for production cost modeling (PCM). This analysis involves moving the LDES component to different buses in the system, running a simulation, and considering the production cost of the simulation. Different system configurations are also analyzed with these scripts (such as moving load or renewable dispatch generators to different buses) to observe the impacts the system configuration has on optimal siting. This repository contains three sub directories discussed below. Both the 5-bus and RTS systems have two different initial configurations for the renewable energy components in them, one that is predominantly PV-driven and one that is predominantly wind-driven. Sienna suite can be found here: https://github.com/NREL-Sienna

Cole, David [University of Wisconsin]↗

Elemental Analysis of Bio-Oils by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). Laboratory Analytical Procedure (LAP), Issue Date: May 13, 2022

Concentrations of inorganic elements is a key quality metric for bio-oils as certain elements impact upgrading processes and product quality. Unless reduced or removed during production and processing, alkali and alkaline metals native to lignocellulosic biomass can carry over into bio-oils contributing to ash content and degraded catalyst performance during upgrading to hydrocarbon fuels or chemical products. Non-metallic elements such as sulfur and phosphorus can also negatively impact upgrading catalysts and product quality. Inductively coupled plasma optical emission spectroscopy (ICP-OES) can be used to measure inorganic elements of interest in bio-oils. This procedure covers the preparation and analysis of fast pyrolysis (FP) and catalytic fast pyrolysis (CFP) bio-oils. The concentrations of these elements can indicate potential bio-oil quality from the perspective of deoxygenation processes. The implications of elemental composition will depend on process parameters such as upgrading catalyst sensitivities. This Laboratory Analytical Procedure (LAP) covers two methods for quantification of inorganic elements by ICP-OES: Procedure A uses microwave assisted digestion with concentrated nitric acid, and Procedure B is an organic ICP-OES method utilizing a diglyme solvent.

09 BIOMASS FUELS↗

Power systems simulations of the western United States region.

This report documents a part of a broad assessment of energy-water-related issues in the western United States. The full analysis involved three Department of Energy national laboratories: Argonne National Laboratory, Los Alamos National Laboratory, and Sandia National Laboratories. Argonne's objective in the overall project was to develop a regional power sector expansion forecast and a detailed unit-level operational (dispatch) analysis. With these two major analysis components, Argonne estimated current and future freshwater withdrawals and consumption related to the operation of U.S. thermal-electric power plants in the Western Electricity Coordinating Council (WECC) region for the period 2005-2025. Water is withdrawn and used primarily for cooling but also for environmental control, such as sulfur scrubbers. The current scope of the analysis included three scenarios: (1) Baseline scenario as a benchmark for assessing the adequacy and cost-effectiveness of water conservation options and strategies, (2) High nuclear scenario, and (3) High renewables scenario. Baseline projections are consistent with forecasts made by the WECC and the Energy Information Administration (EIA) in its Annual Energy Outlook (AEO) (EIA 2006a). Water conservation scenarios are currently limited to two development alternatives that focus heavily on constructing new generating facilities with zero water consumption. These technologies include wind farms and nuclear power plants with dry cooling. Additional water conservation scenarios and estimates of water use associated with fuel or resource extraction and processing will be developed in follow-on analyses.

17 WIND ENERGY↗

The Elastic Analysis Facility's (EAF's) Contribution to the Future of Analysis at Multi-Experiment Institutions and Future Colliders

The Elastic Analysis Facility (EAF) hosted at Fermi National Accelerator Laboratory (Fermilab) is a platform being developed with the goal of providing a fast and efficient facility for physics analysis. As high-energy physics moves towards collecting larger datasets, such as those from the High-Luminosity LHC, the EAF strives to provide a powerful and adaptable framework for future colliders and multi-experiment institutions. Currently, the EAF supports several experiments including CMS, NOvA, and DUNE as well as serving accelerator physicists and beam line operations through integrated software and secure connections to Fermilab's computing resources. In addition, the EAF was designed with a user-friendly interface, intended to be more intuitive for emerging generations of physicists, that is still accessible for established styles of analysis. The EAF can also achieve better analysis efficiency due to the modernization of software and tools that can better utilize Fermilab's computing power. Furthermore, its design incorporates industry standards whenever possible, enhancing its sustainability and making it a possible template for other national or international laboratories and research facilities. Overall, the EAF is a forward-looking solution that will meet the evolving needs of particle physics, ensuring readiness for future colliders and multi-experiment research institutions.

Chavez, Elise [Wisconsin U., Madison]↗

Air Flow Modeling in the Wind Tunnel of the FHWA Aerodynamics Laboratory at Turner-Fairbank Highway Research Center

Computational fluid dynamics (CFD) modeling is widely used in industry for design and in the research community to support, compliment, and extend the scope of experimental studies. Analysis of transportation infrastructure using high performance cluster computing with CFD and structural mechanics software is done at the Transportation Research and Analysis Computing Center (TRACC) at Argonne National Laboratory. These resources, available at TRACC, were used to perform advanced three-dimensional computational simulations of the wind tunnel laboratory at the Turner-Fairbank Highway Research Center (TFHRC). The goals were to verify the CFD model of the laboratory wind tunnel and then to use versions of the model to provide the capability to (1) perform larger parametric series of tests than can be easily done in the laboratory with available budget and time, (2) to extend testing to wind speeds that cannot be achieved in the laboratory, and (3) to run types of tests that are very difficult or impossible to run in the laboratory. Modern CFD software has many physics models and domain meshing options. Models, including the choice of turbulence and other physics models and settings, the computational mesh, and the solver settings, need to be validated against measurements to verify that the results are sufficiently accurate for use in engineering applications. The wind tunnel model was built and tested, by comparing to experimental measurements, to provide a valuable tool to perform these types of studies in the future as a complement and extension to TFHRC’s experimental capabilities. Wind tunnel testing at TFHRC is conducted in a subsonic open-jet wind tunnel with a 1.83 m (6 foot) by 1.83 m (6 foot) cross section. A three component dual force-balance system is used to measure forces acting on tested models, and a three degree of freedom suspension system is used for dynamic response tests. Pictures of the room are shown in Figure 1-1 to Figure 1-4. A detailed CAD geometry and CFD model of the wind tunnel laboratory at TFHRC was built and tested. Results were compared against experimental wind velocity measurements at a large number of locations around the room. This testing included an assessment of the air flow uniformity provided by the tunnel to the test zone and assessment of room geometry effects, such as influence of the proximity the room walls, the non-symmetrical position of the tunnel in the room, and the influence of the room setup on the air flow in the room. This information is useful both for simplifying the computational model and in deciding whether or not moving, or removing, some of the furniture or other movable objects in the room will change the flow in the test zone.

97 MATHEMATICS AND COMPUTING↗

Life Cycle Analysis and Life Cycle Costing for Municipal Solid Waste (MSW) Management and Materials Redeployment to Support ARPA-E’s Potential Program on Waste to Energy and Materials

Municipal solid waste infrastructure in the United States contains complex supply chains to transport, sort, and sequester waste. This project developed models to estimate the environmental and economic costs of waste infrastructure in the U.S. using data from several municipalities. Life cycle costing (LCC) models were developed for waste management relevant supply chain steps, including waste collection, sorting, landfilling, waste-to-energy, ash processing, and recycling. A waste-to-materials and energy (WTM&E) life cycle analysis (LCA) and LCC dashboard was developed in collaboration with Argonne National Laboratory (ANL) and an LCC tool was developed for additional analysis.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Quantitative Analysis of Spectral Impacts on Silicon Photodiode Radiometers: Preprint

Inexpensive broadband pyranometers with silicon photodiode detectors have a non-uniform spectral response over the spectral range of 300-1100 nm. The response region includes only about 70% to 75% of the total energy in the terrestrial solar spectral distribution from 300 nm to 4000 nm. The solar spectrum constantly changes with solar position and atmospheric conditions. Relative spectraldistributions of diffuse hemispherical irradiance sky radiation and total global hemispherical irradiance are drastically different. This analysis convolves a typical photodiode response with SMARTS 2.9.5 spectral model spectra for different sites and atmospheric conditions. Differences in solar component spectra lead to differences on the order of 2% in global hemispherical and 5% or more indiffuse hemispherical irradiances from silicon radiometers. The result is that errors of more than 7% can occur in the computation of direct normal irradiance from global hemispherical irradiance and diffuse hemispherical irradiance using these radiometers.

14 SOLAR ENERGY↗

Using Calibrated Sodium Data for Preliminary Validation of the SRT Code for Advanced Reactors

Various types of non-light water reactors are currently engaged in the U.S. licensing process. Because of inherent differences compared with well-established large light water reactors, appropriate assessment tools are needed. Specifically, source term analysis, which determines environmental dose impacts from potential accident scenarios, is a crucial part of design and licensing. The U.S. Nuclear Regulatory Commission has emphasized the importance of mechanistic source term analysis for advanced reactor deployments. To align with these needs, Argonne National Laboratory has developed the Simplified Radionuclide Transport (SRT) source term analysis code for metal fuel Sodium-cooled Fast Reactors (SFRs) and microreactors. SRT conducts time-dependent radionuclide transport and retention in SFRs for core and ex-core radionuclide source accident sequences. The main objective of SRT is to provide rapid sensitivity and uncertainty analyses, incorporating parametric uncertainties and summarizing probabilistic results. As part of the code validation process, a study focused on the bubble scrubbing module was performed using an experiment recently carried out by the University of Wisconsin-Madison. Based on the analysis, the modeling approach in SRT provides accurate results for small and large aerosols, while slight underprediction of radionuclide aerosol removal are observed for medium sized aerosols. However, the deviation is minor, considering the highly uncertain phenomenon and range of results, and is in the conservative direction. In addition, uncertainty information derived from the experiments is further implemented, reflecting the actual span of parameters, which leads to enhanced agreement with code predictions. The results demonstrate that SRT provides reasonable predictions for the bubble scrubbing process in sodium pool.

Kam, Dong Hoon↗

A Multi-Methods Approach to HRA and Human Performance Modeling: A Field Assessment

The Advanced Test Reactor (ATR) is a research reactor at the Idaho National Laboratory is primarily designed and used to test materials to be used in other, larger-scale and prototype reactors. The reactor offers various specialized systems and allows certain experiments to be run at their own temperature and pressure. The ATR Canal temporarily stores completed experiments and used fuel. It also has facilities to conduct underwater operations such as experiment examination or removal. In reviewing the ATR safety basis, a number of concerns were identified involving the ATR canal. A brief study identified ergonomic issues involving the manual handling of fuel elements in the canal that may increase the probability of human error and possible unwanted acute physical outcomes to the operator. In response to this concern, that refined the previous HRA scoping analysis by determining the probability of the inadvertent exposure of a fuel element to the air during fuel movement and inspection was conducted. The HRA analysis employed the SPAR-H method and was supplemented by information gained from a detailed analysis of the fuel inspection and transfer tasks. This latter analysis included ergonomics, work cycles, task duration, and workload imposed by tool and workplace characteristics, personal protective clothing, and operational practices that have the potential to increase physical and mental workload. Part of this analysis consisted of NASA-TLX analyses, combined with operational sequence analysis, computational human performance analysis (CHPA), and 3D graphical modeling to determine task failures and precursors to such failures that have safety implications. Experience in applying multiple analysis techniques in support of HRA methods is discussed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Evaluation of CMIP6 Streamflow in the Arctic

Earth system models (ESMs) serve as the primary basis for projecting future streamflow changes, but they are biased in terms of the their ability to reproduce historical observations of streamflow. Rigorous downscaling and bias-correction procedures, which are time-consuming and introduce uncertainties, are commonly used to address these biases in streamflow or runoff. However, the applicable limits of streamflow projections remain largely untested through direct comparisons with observations. In this work, we compare historical streamflow time series observations with a suite of Coupled Model Intercomparison Project phase 6 (CMIP6) ESMs to assess the space and time scales at which each ESM represents historic streamflow observations. We focus our analysis on streamflow across the Arctic given the higher degree of warming experienced over this region, underscoring its importance for understanding the future changes. A series of metrics—volume, seasonality, extreme capturing streamflow variability, drought, and flooding is tested to assess ESM simulation skill for total events and overall distributions. Our results indicate that although improvements are necessary in ESM runoff and streamflow projections, the use of temporal averaging and targeting the best-fit model for comparison to observations when a suite of ESMs is considered can provide robust streamflow projections. Moreover, this work provides a basis for contextualizing the limits of ESM applicability for studies aiming to assess streamflow in the future.

54 ENVIRONMENTAL SCIENCES↗

Effects of Potassium Doping on CO Hydrogenation Over MoS2 Catalysts: A First-Principles Investigation

Periodic density functional theory calculations were performed to explore the effects of doping potassium (K) on the reactivity of CO hydrogenation to mixed higher alcohols over MoS2 catalysts. We found that the doped K species over the model MoS2(100) catalyst surface acts as a unique site for CO adsorption where either the K-C or the K-O bonding is allowed. The charge transfer from the K 4s electron to the conduction band of the MoS2(100) surface slightly enhances CO adsorption at the edge Mo sites. Due to the large electropositive nature, the presence of the surface K species, however, will hinder the dissociative adsorption of hydrogen. As a result, the doping K species drive CO hydrogenation selectivity toward the C2+ alcohols instead of hydrocarbons by increasing CO and decreasing hydrogen coverages on the MoS2 catalysts. To further elucidate the effect of doping K on the shifting of the selectivity toward CO hydrogenation, we calculated several key reaction steps leading to the H2CCO precursor formation, i.e., CO hydrogenation, the C-O bond scission and the C-C coupling (CH2+CO). The C-C coupling step is favorable for both the Mo and S edges. However, the undoped S edge has an overall more thermodynamically favorable reaction profile up to C-O scission compared with the Mo edge. This work was funded by a CRADA project (No. PNNL/297) with Range Fuels. The research was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. The work involving the results analysis and mansucript writing was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences.

Environmental Molecular Sciences Laboratory↗

Computational Mechanics Support to National Highway Traffic Safety Administration (NHTSA), Progress Report, August 2012

The Transportation Research and Analysis Computing Center (TRACC) with the National Highway Safety Administration (NHTSA) Vehicle Safety Research has established an interagency agreement between the U.S. Department of Transportation and the U.S Department of Energy to provide assistance to NHTSA’s ongoing projects. The work will be performed in FY 2013 by the Transportation Research and Analysis Computing Center at Argonne National Laboratory. The project will be performed under the “Work for Others” (WFO) clause of the prime contract between the operator of Argonne National Laboratory (UChicago Argonne LLC) and the U.S Department of Energy. For the past five years, NHTSA has been using TRACC’s HPC computer and participating in computational structural mechanics training classes. NHTSA mainly used the LS-DYNA software package including: LS-DYNA (multiphysics solvers), LS-OPT (optimization tool) and LS-PrePost (pre- and post-processing tool). NHTSA crash analysis researchers were early users of the TRACC cluster and have become the most active users of TRACC’s 500 core LS-DYNA software license. The large core-license-pool allows NHTSA to minimize the time needed to obtain simulation results and, thus, expand modeling variations that must be considered to ensure credible treatment of crash events while meeting critical project deadlines. The purposes of this project are (1) to enhance future cooperation between NHTSA and TRACC and (2) to secure NHTSA’s access to TRACC’s high performance cluster, LS-DYNA and TRACC’s staff expertise.

Ley, H.↗

Final Report for the San Jose State University Effort for Lawrence Livermore National Laboratory

This report is the conclusion of an effort of the Department of Physics and Astronomy at San Jose State University (SJSU) for Lawrence Livermore National Laboratory (LLNL). SJSU was tasked to assist with data analysis of recent photonuclear measurement data taken at Duke University’s Free Electron Laser Laboratory (FELL) using the High Intensity Gamma‐ray Source (HIGS).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A modular approach for automated sample preparation and chemical analysis

Changes in international relations, especially within the past several years, have dramatically affected the programmatic thrusts of the U.S. Department of Energy (DOE). The DOE now is addressing the environmental cleanup required as a result of 50 years of nuclear arms research and production. One major obstacle in the remediation of these areas is the chemical determination of potentially contaminated material using currently acceptable practices. Process bottlenecks and exposure to hazardous conditions pose problems for the DOE. One proposed solution is the application of modular automated chemistry using Standard Laboratory Modules (SLM) to perform Standard Analysis Methods (SAM). The Contaminant Analysis Automation (CAA) Program has developed standards and prototype equipment that will accelerate the development of modular chemistry technology and is transferring this technology to private industry.

Clark, Michael L.↗

Chromatographic, Spectroscopic and Mass Spectrometric Approaches for Exploring the Habitability of Mars in 2012 and Beyond with the Curiosity Rover

The Sample Analysis at Mars (SAM) suite of instruments on the Curiosity Rover of Mars Science Laboratory Mission is designed to provide chemical and isotopic analysis of organic and inorganic volatiles for both atmospheric and solid samples. The goals of the science investigation enabled by the gas chromatograph mass spectrometer and tunable laser spectrometer instruments of SAM are to work together with the other MSL investigations is to quantitatively assess habitability through a series of chemical and geological measurements. We describe the multi-column gas chromatograph system employed on SAM and the approach to extraction and analysis of organic compounds that might be preserved in ancient martian rocks.

Mahaffy, Paul↗

A Generalized Perturbation Theory Solver In Rattlesnake Based On PETSc With Application To TREAT Steady State Uncertainty Quantification

Rattlesnake and MAMMOTH are the designated TREAT analysis tools currently being developed at the Idaho National Laboratory. Concurrent with development of the multi-physics, multi-scale capabilities, sensitivity analysis and uncertainty quantification (SA/UQ) capabilities are required for predicitive modeling of the TREAT reactor. For steady-state SA/UQ, that is essential for setting initial conditions for the transients, generalized perturbation theory (GPT) will be used. This work describes the implementation of a PETSc based solver for the generalized adjoint equations that constitute a inhomogeneous, rank deficient problem. The standard approach is to use an outer iteration strategy with repeated removal of the fundamental mode contamination. The described GPT algorithm directly solves the GPT equations without the need of an outer iteration procedure by using Krylov subspaces that are orthogonal to the operator’s nullspace. Three test problems are solved and provide sufficient verification for the Rattlesnake’s GPT capability. We conclude with a preliminary example evaluating the impact of the Boron distribution in the TREAT reactor using perturbation theory.

97 MATHEMATICS AND COMPUTING↗

Refine your search to explore more results.