Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IONIC CONDUCTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Ambi-site substitution of Mn in lanthanum germanate apatites

A neutron diffraction study at 4 K of the Mn doped lanthanum germanate apatite-type oxide ion conductor of nominal starting composition 'La{sub 9.5}Mn{sub 0.5}(GeO{sub 4}){sub 6}O{sub 2.75}' is reported. The structure was refined in space group P6{sub 3}/m, although high thermal displacement parameters were observed for the oxide ion sites (particularly O3, and O4). Reduced thermal displacement parameters were obtained by splitting the O3 site, and allowing the O4 oxygen to move off site, which may indicate local regions of lower symmetry within the structure. In addition, the data suggested ambi-site substitution of Mn, with it being present on both the Ge site and the La site. Assuming no change in La:Mn:Ge ratio, a composition of La{sub 9.18}Mn{sub 0.28}(GeO{sub 4}){sub 5.8}(MnO{sub 4}){sub 0.2}O{sub 2} was determined. As such there are nominally no interstitial oxide ions, but rather cation vacancies on the La site. Therefore, the high conductivity for this sample is most likely related to the introduction of Frenkel-type defects at higher temperature, as previously proposed for other apatite-type systems containing vacancies on the La site.

36 MATERIALS SCIENCE↗

Optimization of anionic conductivity through the coexistence of ionomer cluster and backbone-backbone morphologies in anion exchange membranes

Random copolymers of poly(4-vinylpyridine) and polyisoprene were synthesized, and subsequently quaternized with 1-alkylbromides. The number of carbons on the pendant side-chain of the resultant comb-shaped polymer, n, ranged from 2-8. The comb-shaped polymers were crosslinked employing thiol-ene chemistry to give mechanically robust ion conducting membranes. Analysis by wide and medium-angle X-ray scattering show three morphology regimes that are dependent on the number of carbons on the pendant side-chains. When n = 2, ionomer cluster morphology was dominant, when n = 8 backbone-backbone morphology was dominant, and when n = 3-6, the membrane showed a coexistence of both ionomer cluster and backbone-backbone morphologies. Evaluation of the water uptake of the membranes showed a maximum water uptake per cation of 9.5 when n = 5 at 95% relative humidity (RH) and 60 degrees C. Finally, conductivity of the samples characterized by electrochemical impedance spectroscopy showed bromide conductivity as high as 110 mS/cm when n = 3 at 95% RH and 90 degrees C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Delivering Transmembrane Peptide Complexes to the Gas Phase Using Nanodiscs and Electrospray Ionization

The gas-phase conformations of dimers of the channel-forming membrane peptide gramicidin A (GA), produced from isobutanol or aqueous solutions of GA-containing nanodiscs (NDs), are investigated using electrospray ionization-ion mobility separation-mass spectrometry (ESI-IMS-MS) and molecular dynamics (MD) simulations. The IMS arrival times measured for (2GA + 2Na){sup 2+} ions from isobutanol reveal three different conformations, with collision cross-sections (Ω) of 683 Å{sup 2} (conformation 1, C1), 708 Å{sup 2} (C2), and 737 Å{sup 2} (C3). The addition of NH{sub 4}CH{sub 3}CO{sub 2} produced (2GA + 2Na){sup 2+} and (2GA + H + Na){sup 2+} ions, with Ω similar to those of C1, C2, and C3, as well as (2GA + 2H){sup 2+}, (2GA + 2NH{sub 4}){sup 2+}, and (2GA + H + NH{sub 4}){sup 2+} ions, which adopt a single conformation with a Ω similar to that of C2. These results suggest that the nature of the charging agents, imparted by the ESI process, can influence dimer conformation in the gas phase. Notably, the POPC NDs produced exclusively (2GA + 2NH{sub 4}){sup 2+} dimer ions; the DMPC NDs produced both (2GA + 2H){sup 2+} and (2GA + 2NH{sub 4}){sup 2+} dimer ions. While the Ω of (2GA + 2H){sup 2+} is similar to that of C2, the (2GA + 2NH{sub 4}){sup 2+} ions from NDs adopt a more compact structure, with a Ω of 656 Å{sup 2}. It is proposed that this compact structure corresponds to the ion conducting single stranded head-to-head helical GA dimer. These findings highlight the potential of NDs, combined with ESI, for transferring transmembrane peptide complexes directly from lipid bilayers to the gas phase. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Optimizing proton conductivity in zirconates through defect engineering

The alkaline-earth zirconates (CaZrO 3 , SrZrO 3 , and BaZrO 3 ) are under active investigation as solid-state electrolytes in hydrogen fuel cells. Their performance as proton conductors depends critically on the properties of acceptor dopants. Here, we use first-principles calculations to study the role of acceptors and point defects in incorporating protons through an oxygen-vacancy-mediated process. For CaZrO 3 , we find that Zr Ca antisites suppress formation of oxygen vacancies. Other intrinsic point defects are shown not to hinder performance. Common unintentional impurities, such as C and N, are not good acceptors but can incorporate in other configurations. Our results show that the effectiveness of common dopants such as Sc and Y is limited by self-compensation due to their incorporation on the "wrong" cation site, where they act as donors. We demonstrate that using alkali metal dopants overcomes this problem, as the formation energy of compensating donors is very high. Alkali metal dopants also have low binding energies for protons, reducing their tendency to act as traps and hence enhancing proton conductivity. As a result, our guidelines for choosing acceptor dopants and optimizing synthesis conditions can greatly improve the efficacy of these proton-conducting oxides as solid-state electrolytes.

08 HYDROGEN↗

Well-aligned polycrystalline lanthanum silicate oxyapatite grown by reactive diffusion between solid La{sub 2}SiO{sub 5} and gases [SiO+1/2O{sub 2}]

The c-axis-oriented polycrystalline lanthanum silicate oxyapatite, La{sub 9.48}(Si{sub 5.89}□{sub 0.11})O{sub 26} (□ denotes a vacancy in the Si site), was successfully prepared by the reactive diffusion between randomly grain-oriented La{sub 2}SiO{sub 5} polycrystal and [SiO+1/2O{sub 2}] gases at 1873 K in Ar atmosphere. The polycrystal was characterized using optical microscopy, scanning electron microscopy equipped with energy dispersive X-ray spectroscopy, micro-Raman spectroscopy, X-ray diffractometry, and impedance spectroscopy. The crystal structure (space group P6{sub 3}/m) showed the deficiency of Si site at ca. 1.9%. The bulk oxide-ion conductivity along the grain-alignment direction steadily increased from 9.2 × 10{sup −3} to 1.17 × 10{sup −2} S/cm with increasing temperature from 923 to 1073 K. The activation energy of conduction was 0.23(2) eV. - Graphical abstract: We have successfully prepared the highly c-axis-oriented polycrystalline La{sub 9.48}(Si{sub 5.89}□{sub 0.11})O{sub 26} by the reactive diffusion between randomly grain-oriented La{sub 2}SiO{sub 5} polycrystal and [SiO + 1/2O{sub 2}] gases at 1873 K in Ar atmosphere. The crystal structure (space group P6{sub 3}/m) showed the deficiency of Si site of ca. 1.9%. - Highlights: • The c-axis-oriented polycrystalline La{sub 9.48}(Si{sub 5.89}□{sub 0.11})O{sub 26} is successfully prepared. • Crystal structure of La{sub 9.48}(Si{sub 5.89}□{sub 0.11})O{sub 26} is determined by single-crystal XRD. • The polycrystal shows relatively high oxide ion conductivity along the common c-axis. • Reactive diffusion is successfully used for the preparation of grain-aligned ceramics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lithium transition metal fluorophosphates (Li{sub 2}CoPO{sub 4}F and Li{sub 2}NiPO{sub 4}F) as cathode materials for lithium ion battery from atomistic simulation

Lithium transition metal fluorophosphates (Li{sub 2}MPO{sub 4}F, M: Co and Ni) have been investigated from atomistic simulation. In order to predict the characteristics of these materials as cathode materials for lithium ion batteries, structural property, defect chemistry, and Li{sup +} ion transportation property are characterized. The core–shell model with empirical force fields is employed to reproduce the unit-cell parameters of crystal structure, which are in good agreement with the experimental data. In addition, the formation energies of intrinsic defects (Frenkel and antisite) are determined by energetics calculation. From migration energy calculations, it is found that these flurophosphates have a 3D Li{sup +} ion diffusion network forecasting good Li{sup +} ion conducting performances. Accordingly, we expect that this study provides an atomic scale insight as cathode materials for lithium ion batteries. - Graphical abstract: Lithium transition metal fluorophosphates (Li{sub 2}CoPO{sub 4}F and Li{sub 2}NiPO{sub 4}F). Display Omitted - Highlights: • Lithium transition metal fluorophosphates (Li{sub 2}MPO{sub 4}F, M: Co and Ni) are investigated from classical atomistic simulation. • The unit-cell parameters from experimental studies are reproduced by the core–shell model. • Li{sup +} ion conducting Li{sub 2}MPO{sub 4}F has a 3D Li{sup +} ion diffusion network. • It is predicted that Li/Co or Li/Ni antisite defects are well-formed at a substantial concentration level.

36 MATERIALS SCIENCE↗

Lithium stoichiometry of solid electrolytes based on tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}

Graphical abstract: - Highlights: • We prepared Li{sub x}La{sub 3}Zr{sub 2}O{sub 8.5+0.5x} (x = 6, 7, 8, 9, 10) by the citrate–nitrate method. • We studied phase composition and conductivity of Li{sub x}La{sub 3}Zr{sub 2}O{sub 8.5+0.5x}. • We proposed a simple method to determine the carbonate impurity content in the solid electrolytes. • The synthesized solid electrolytes Li{sub x}La{sub 3}Zr{sub 2}O{sub 8.5+0.5x} (x = 7–9) have 1.32–3.49 wt.% Li{sub 2}CO{sub 3}. • The composition with x = 9 has high total conductivity, 7.5 × 10{sup −6} S cm{sup −1}, at room temperature. - Abstract: Samples of Li{sub x}La{sub 3}Zr{sub 2}O{sub 8.5+0.5x} (x = 6, 7, 8, 9, 10) were synthesized with the citrate–nitrate method. Neutron diffraction studies have shown the presence of lithium carbonate impurities in the synthesized compounds. We propose a simple and effective method to determine the carbonate impurity content in the solid electrolytes. The technique is based on the measurement of the carbon dioxide volume produced from the interaction of the investigated material with acid. Determined in this way, the content of Li{sub 2}CO{sub 3} in the synthesized electrolytes Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}, Li{sub 8}La{sub 3}Zr{sub 2}O{sub 12.5} and Li{sub 9}La{sub 3}Zr{sub 2}O{sub 13} are 1.32 ± 0.04, 1.95 ± 0.06 and 3.49 ± 0.10 wt.%, respectively. From the obtained data, the actual lithium content per formula unit of complex oxide was calculated for the synthesized compounds. The composition with x = 9 had the highest total conductivity, σ = 7.5 × 10{sup −6} S cm{sup −1}, at room temperature. All the investigated electrolytes have an activation energy of approximately 50 kJ mol{sup −1}.

36 MATERIALS SCIENCE↗

Formation mechanism of anodic titanium oxide in mixed electrolytes

Highlights: • Compact anodic titanium oxide (CATO) and anodic TiO{sub 2} nanotubes (ATNTs) were compared. • A distinct transform from CATO films into the porous ATNTs was observed firstly. • FESEM evidences for oxygen bubble mould effect were provided firstly. • Formation mechanisms for different titanium oxide films are confirmed consistent. - Abstract: The formation mechanism of anodic TiO{sub 2} nanotubes (ATNTs) remains mysterious and complicated. Usually, ATNTs are fabricated in pure NH{sub 4}F electrolytes rather than mixed electrolytes and Ti anodizations are carried out under potentiostatic rather than galvanostatic conditions. In this work, anodizations under the potentiostatic and galvanostatic conditions are conducted. The formation processes of titanium oxide film in different mixed electrolytes are explored in detail. By changing the mass ratios of oxalic acid and ammonium fluoride, different kinds of anodic titanium oxide films are fabricated: the compact anodic titanium oxide (CATO) films, transient-state anodic titanium oxide films and porous films (ATNTs). A distinct transform from CATO films into ATNTs was observed. Cavities within oxide and hemispheric bottoms are found, confirming the presence of oxygen bubble mould. Based on the electronic current and ionic current model, a consistent formation mechanism for three kinds of anodic titanium oxide films in mixed electrolytes is proposed.

36 MATERIALS SCIENCE↗

DEVELOPMENT AND SELECTION OF IONIC LIQUID ELECTROLYTES FOR HYDROXIDE CONDUCTING POLYBENZIMIDAZOLE MEMBRANES IN ALKALINE FUEL CELLS

Alkaline fuel cell (AFC) operation is currently limited to specialty applications such as low temperatures and pure HO due to the corrosive nature of the electrolyte and formation of carbonates. AFCs are the cheapest and potentially most efficient (approaching 70%) fuel cells. The fact that non-Pt catalysts can be used, makes them an ideal low cost alternative for power production. The anode and cathode are separated by and solid electrolyte or alkaline porous media saturated with KOH. However, CO from the atmosphere or fuel feed severely poisons the electrolyte by forming insoluble carbonates. The corrosivity of KOH (electrolyte) limits operating temperatures to no more than 80°C. This chapter examines the development of ionic liquids electrolytes that are less corrosive, have higher operating temperatures, do not chemically bond to CO and enable alternative fuels. Work is detailed on the IL selection and characterization as well as casting methods within the polybenzimidazole based solid membrane. This approach is novel as it targets the root of the problem (the electrolyte) unlike other current work in alkaline fuel cells which focus on making the fuel cell components more durable.

30 DIRECT ENERGY CONVERSION↗

Simulations with machine learning potentials identify the ion conduction mechanism mediating non-Arrhenius behavior in LGPS

Abstract Li 10 Ge(PS 6 ) 2 (LGPS) is a highly concentrated solid electrolyte, in which Coulombic repulsion between neighboring cations is hypothesized as the underlying reason for concerted ion hopping, a mechanism common among superionic conductors such as Li 7 La 3 Zr 2 O 12 (LLZO) and Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 (LATP). While first principles simulations using molecular dynamics (MD) provide insight into the Li + transport mechanism, historically, there has been a gap in the temperature ranges studied in simulations and experiments. Here, we used a neural network potential trained on density functional theory (DFT) simulations, to run up to 40-nanosecond long MD simulations at DFT-like accuracy to characterize the ion conduction mechanisms across a range of temperatures that includes previous simulations and experimental studies. We have confirmed a Li + sublattice phase transition in LGPS around 400 K, below which the ab -plane diffusivity D a b ∗ is drastically reduced. Concomitant with the sublattice phase transition near 400 K, there is less cation-cation (cross) correlation, as characterized by Haven ratios closer to 1, and the vibrations in the system are more harmonic at lower temperature. Intuitively, at high temperature, the collection of vibrational modes may be sufficient to drive concerted ion hops. However, near room temperature, the vibrational modes available may be insufficient to overcome electrostatic repulsion, thus resulting in less correlated ion motion and comparatively slower ion conduction. Such phenomena of a sublattice phase transition, below which concerted hopping plays a less significant role, may be extended to other highly concentrated solid electrolytes such as LLZO and LATP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of samaria doping on the resistance of ceria thin films and its implications to the planar oxygen sensing devices

In order to evaluate and analyze the effect of samarium (Sm) doping on the resistance of cerium oxide, we have grown highly oriented samaria doped ceria (SDC) thin films on sapphire, Al2O3 (0001) substrates by using oxygen plasma-assisted molecular beam epitaxy (OPA-MBE). The film growth was monitored using reflection high-energy electron diffraction (RHEED) which shows two-dimensional growth throughout the deposition. Following growth, the thin films were characterized by X-ray photoelectron spectroscopy (XPS), high-resolution X-ray diffraction (HRXRD), and Rutherford backscattering spectrometry (RBS). XPS depth-profile shows Sm atoms are uniformly distributed in ceria lattice throughout the bulk of the film. The valence states of Ce and Sm in doped thin films are found to be Ce4+ and Sm3+, respectively. HRXRD shows the samaria doped ceria films on Al2O3(0001) exhibit (111) preferred orientation. Ion-channeling in RBS measurements confirms high quality of the thin films. The resistance of the samaria doped ceria films, obtained by two probe measurement capability under various oxygen pressure (1mTorr-100Torr) and temperatures (623K to 973K), is significantly lower than that of pure ceria under same conditions. The 6Sm% doped ceria film is the optimum composition for highest conductivity. This is attributed to the increased oxygen vacant sites in fluorite crystal structure of the epitaxial thin films which facilitate faster oxygen diffusion through hopping process.

36 MATERIALS SCIENCE↗

Electro-Osmosis and Water Uptake in Polymer Electrolytes in Equilibrium with Water Vapor at Low Temperatures

Water uptake and electro-osmosis are investigated to improve the understanding and aid the modeling of water transport in proton-exchange membrane fuel cells (PEMFCs) below 0 C. Measurements of water sorption isotherms show a significant reduction in the water capacity of polymer electrolytes below 0 C. This reduced water content is attributed to the lower vapor pressure of ice compared to supercooled liquid water. At -25 C, 1100 equivalent weight Nafion in equilibrium with vapor over ice has 8 moles of water per sulfonic acid group. Measurements of the electro-osmotic drag coefficient for Nafion and both random and multiblock copolymer sulfonated poly(arylene ether sulfone) (BPSH) chemistries are reported for vapor equilibrated samples below 0 C. The electro-osmotic drag coefficient of BPSH chemistries is found to be {approx}0.4, and that of Nafion is {approx}1. No significant temperature effect on the drag coefficient is found. The implication of an electro-osmotic drag coefficient less than unity is discussed in terms of proton conduction mechanisms. Simulations of the ohmically limited current below 0 C show that a reduced water uptake below 0 C results in a significant decrease in PEMFC performance.

25 ENERGY STORAGE↗

The Li{sup +} conducting composite based on LiTi{sub 2}(PO{sub 4}){sub 3} and Li{sub 3}BO{sub 3} glass

Highlights: • Addition of the LBO glass enhance total ion conductivity up to four orders of magnitude. • Transport of Li{sup +} could be attributed to two media: grains and grain boundaries. • Sintering temperature is the most influential factor affecting the σ{sub tot}. • Melting of the LBO above 700 °C supports the sintering process. - Abstract: The LiTi{sub 2}(PO{sub 4}){sub 3} based composites containing amorphous Li{sub 3}BO{sub 3} were formed and investigated by means of X–ray diffractometry, thermogravimetry, scanning electron microscopy, impedance spectroscopy and density methods. The study shows that when a polycrystalline LiTi{sub 2}(PO{sub 4}){sub 3} material is sintered with Li{sub 3}BO{sub 3} glass, the resultant ceramics exhibit very high total ion conductivity. The maximum conductivity of 1.43 × 10{sup −4} S cm{sup −1} at 30 °C was achieved for the LTP–0.3LBO material sintered at 900 °C compared to 5.15 × 10{sup −8} S cm{sup −1} of the ceramic LiTi{sub 2}(PO{sub 4}){sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structure and dielectric properties of a rare earth double perovskite oxide Ba{sub 2}CeTaO{sub 6}

Highlights: {yields} A single phase Ba{sub 2}CeTaO{sub 6} (BCT) having monoclinic structure is synthesized. {yields} Impedance spectroscopy is applied to investigate the ac electrical properties of BCT. {yields} Complex impedance plane plots show grain contribution for BCT. {yields} The frequency dependent conductivity spectra follow the power law. -- Abstract: A rare earth double perovskite oxide barium cerium tantalate, Ba{sub 2}CeTaO{sub 6} (BCT) is synthesized by solid-state reaction. The X-ray diffraction pattern of the sample at room temperature (25 {sup o}C) shows monoclinic structure, with the lattice parameters, a = 9.78 A, b = 9.02 A and c = 4.27 A and {beta} = 93.8{sup o}. A scanning electron micrograph shows the formation of grains with average size {approx} 2 {mu}m. Impedance spectroscopy is applied to investigate the ac electrical properties of BCT in a temperature range from 303 to 673 K and in a frequency range from 100 Hz to 1 MHz. Complex-impedance-plane plots show grain contribution for BCT. The frequency-dependent electrical data are analyzed in the framework of the conductivity and modulus formalisms. The frequency-dependent conductivity spectra follow a power law. The conductivity at 110 Hz varies from 3.5 x 10{sup -7} S m{sup -1} to 1.2 x 10{sup -2} S m{sup -1} with increasing temperature from 303 to 673 K, respectively. The scaling behaviour of M'' and Z'' suggest that the relaxation describes the same mechanism at various temperatures.

36 MATERIALS SCIENCE↗

Effect of Sm and Mg co-doping on the properties of ceria-based electrolyte materials for IT-SOFCs

Samples of Sm and Mg co-doped ceria electrolytes of Ce{sub 0.8}Sm{sub 0.2-x}Mg{sub x}O{sub 2-{delta}} (x = 0, 0.05, 0.10, 0.15 and 0.20) were sintered from powders obtained by solid-state reaction method. The structures and electrical properties were characterized by X-ray diffraction (XRD) and AC impedance spectroscopy (IS). The thermal expansion curves of samples were measured and the thermal expansion coefficients between 100 and 800 deg. C were calculated. Results showed that co-doping with appropriate ratio of Sm and Mg can improve the electrical performance of ceria-based electrolytes. As the substitution amount of Mg for Sm increased up to 50 mol%, the conductivity of the samples maintained almost unchanged or even slightly higher than that doped only with Sm in intermediate temperature. The results suggest that the materials cost for producing the ceria-based intermediate temperature solid oxide fuel cells (IT-SOFCs) may be significantly reduced owing to the cost difference between Mg and Sm.

36 MATERIALS SCIENCE↗

Charge carrier dynamics in nanocrystalline Dy substituted ceria based oxygen ion conductors

Nano-crystalline Ce{sub 1-x}Dy{sub x}O{sub 2-δ} (x = 0.1-0.5) materials were prepared using the low temperature citrate auto-ignition method. The Rietveld analysis of the XRD data confirmed the single phase cubic fluorite structure. The particle sizes of the sintered samples are in nano range and lattice parameter increases with Dy concentration. Polydispersed and agglomerated particles are observed by SEM. The EDAX spectra show good stoichiometry of the different atoms in the samples. The conductivity is found to have both grain and grain boundary contribution and shows highest value at x= 0.2. The frequency dependence of dielectric permittivity has been analyzed using Havrilliak-Negami formalism. The variation in different electrical properties has been explained by formation defect associates and their interaction with charge carriers.

36 MATERIALS SCIENCE↗

Reducibility study of oxide-ion conductors La{sub 2-x}Ba{sub x}Mo{sub 2-y}A{sub y}O{sub 9-{delta}} (A = W, Al, Ga) assessed by impedance spectroscopy

The reducibility of oxide-ion conductors La{sub 2-x}Ba{sub x}Mo{sub 2-y}W{sub y}O{sub 9-{delta}} (x = 0, 0.06; y = 0, 0.1, 0.5, 1.0) and La{sub 2}Mo{sub 1.9}A{sub 0.1}O{sub 9-{delta}} (A = Al, Ga) were studied in the reducing atmosphere of 5%H{sub 2} + Ar by means of impedance spectroscopy measurement. The introduction of Ba at La site in La{sub 2}Mo{sub 2-y}W{sub y}O{sub 9} can lower the sintering temperature by about 100 K in comparison with the La{sub 2}Mo{sub 2-y}W{sub y}O{sub 9} samples. All substitutions can enhance the conductivity and improve the reducibility in the temperature range from 548 to 923 K. The double substitution of Ba and W as well as substitution of Al or Ga at Mo sites has a better stabilizing effect than the single tungsten substitution. Among these substitutions the introduction of Al has the best stabilizing effect.

36 MATERIALS SCIENCE↗

Durable, Impermeable Brazes for Solid Oxide Fuel Cells (Final Report)

To develop a new braze to replace the current state-of-the-art Ag-CuO reactive air braze (RAB), two approaches were proposed: 1) development of a new, self-passivating, silver-free braze and 2) development of a CuO-free, silver-based braze. For the first approach, an integrated computational-experimental method was used. Thermo-Calc® was utilized to quickly screen through hundreds of alloy systems to identify candidate braze compositions with the appropriate melting ranges. Material compositions, melting ranges, mechanical properties, oxidation resistance, and wetting characteristics of the candidate alloys were then analyzed experimentally. Substrate surface pre-treatments, active element additions, and novel brazing schemes were also investigated. Unfortunately, the current study failed to identify new silver-free braze compositions suitable for SOFC applications. To help measure the passivation characteristics of surface passivating braze oxide coatings, work was conducted to demonstrate, for the first time, that a variety of disparate and technologically-relevant thermal, mechanical, and electrochemical oxygen-exchange thin film material properties could all be obtained from in situ , current-collector-free wafer curvature measurements. Specifically, temperature or oxygen partial pressure induced changes in the curvature of 230 nm thick (100)-oriented Pr 0.1 Ce 0.9 O 1.95_x (10PCO) films atop 200 mm thick single crystal yttria stabilized zirconia or magnesium oxide substrates were used to measure the biaxial modulus, Young’s modulus, thermal expansion coefficient, thermochemical expansion coefficient, oxygen nonstoichiometry, chemical oxygen surface exchange coefficient, oxygen surface exchange resistance, thermal stress, chemical stress, thermal strain, and chemical strain of the model mixed ionic electronic conducting material 10PCO. The (100)-oriented thin film 10PCO thermal expansion coefficient, thermo-chemical expansion coefficient, oxygen nonstoichiometry, and Young’s modulus (which is essentially constant, at ~200 MPa, over the entire 280–700 °C temperature range in air) measured here were similar to those from other bulk and thin film 10PCO studies. In addition, the measured PCO10 oxygen surface coefficients were in agreement with those reported by other in situ , current collector- free techniques. However, the measured PCO10 oxygen surface exchange coefficients were significantly lower than those obtained from literature studies with large amounts of intentional or inadvertent precious metal surface coverage/contamination (suggesting that uncontaminated (100)-oriented 10PCO may not be a desirable SOFC cathode material). Taken together, this highlighted the advantages of using a sample’s mechanical response, instead of the more traditional electrical response, to probe the electrochemical properties of the ion-exchange materials used in solid oxide fuel cell, solid oxide electrolysis cell, gas-sensing, battery, emission control, water splitting, water purification, and other electrochemically-active devices. For the second approach, a novel silver-nickel brazing method was developed. It was demonstrated that transient porous nickel interlayers, instead of reactive element additions, could be used to promote Ag wetting on yttria stabilized zirconia (YSZ) and produce high-quality YSZ stainless steel (SS) braze joints. Mechanical tests on these reactive-element-free, silver-based SOFC braze joints, both before and after 500 hours of 750°C oxidation in air, showed that the braze and braze interface strength were higher than the underlying YSZ|NiO-YSZ substrate. The microstructural and compositional evolution of SS|Ag-Ni|YSZ braze joints exposed to dual atmosphere (air on one side and 4%H 2 -96%N 2 on the other side) for 300 hours of isothermal 750 °C aging and 300 25°C/min 35-830 °C rapid thermal cycles were compared to a Ag-3CuO braze joint. In contrast to conventional Ag-CuO RAB brazes, the Ag-Ni brazes remained pore free and well bonded, suggesting that Ag-Ni brazes may be more suitable for long term SOFC operation than Ag-CuO brazes. Other applications inspired by the silver-nickel wetting process on various ceramic substrates were also explored. In support of efforts to identify new CuO-free Ag-based brazes, density functional theory and ab initio molecular dynamics calculations were performed to 1) understand silver wetting on YSZ, and 2) identify new oxides to promote silver wetting on YSZ. These simulations found that while the formation of dissolved oxygen clusters within molten silver at the YSZ interface promoted wetting, much greater wetting angle reductions came from the formation of metal oxide interlayers at the Ag-YSZ interface. Through the development of a simple descriptor, many simple metal oxides (single cation) were examined. Unfortunately, their ability to promote Ag wetting were less than that of CuO. However, expanding the search to multi-cation oxides led to several promising candidates, such as CuAlO 2 , CuGaO 2 , and Cu 3 TiO 4 ; all of which are also stable in the reducing SOFC conditions. Depending upon their solubility in molten Ag, these newly-identified oxides could either be pre-applied as wetting promoting interlayers or directly incorporated into Ag to form new reactive air brazes.

36 MATERIALS SCIENCE↗

Refine your search to explore more results.