Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERMEDIATE STATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Mode locking and mode competition in a nonequilibrium solid-state condensate

A trapped polariton condensate with continuous pumping and decay is analyzed using a generalized Gross-Pitaevskii model. Whereas an equilibrium condensate is characterized by a macroscopic occupation of a ground state, here the steady states take more general forms. Some are characterized by a large population in an excited state; others by large populations in several states, which may overlap spatially. In the latter case, the highly populated states synchronize to a common frequency above a critical density. At intermediate densities, they can drive condensation in other trap modes by parametric scattering. Estimates for the critical density of the synchronization transition are consistent with experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Manganese Oxidation States in Volcanic Soils across Annual Rainfall Gradients

Manganese (Mn) exists as Mn(II), Mn(III), or Mn(IV) in soils, and the Mn oxidation state controls the roles of Mn in numerous environmental processes. However, the variations of Mn oxidation states with climate remain unknown. Here we determined the Mn oxidation states in highly weathered bulk volcanic soils (primary minerals free) across two rainfall gradients covering mean annual precipitation (MAP) of 0.25–5 m in the Hawaiian Islands. With increasing MAP, the soil redox conditions generally shifted from oxic to suboxic and to anoxic despite fluctuating at each site; concurrently, the proportions of Mn(IV) and Mn(II) decreased and increased, respectively. Mn(III) was low at both low and high MAP, but accumulated substantially, up to 80% of total Mn, in soils with prevalent suboxic conditions at intermediate MAP. Mn(III) was likely hosted in Mn(III,IV) and iron(III) oxides or complexed with organic matter, and its distribution among these hosts varied with soil redox potentials and soil pH. Soil redox conditions and rainfall-driven leaching jointly controlled exchangeable Mn(II) in soils, with its concentration peaking at intermediate MAP. The Mn redox chemistry was at disequilibrium, with the oxidation states correlating with long-term average soil redox potentials better than with soil pH. The soil redox conditions likely fluctuated between oxic and anoxic conditions more frequently at intermediate than at low and high MAP, creating biogeochemical hot spots where Mn, Fe, and other redox-sensitive elements may be actively cycled.

36 MATERIALS SCIENCE↗

Maskelynite formation via solid-state transformation: Evidence of infrared and x-ray anisotropy

We present optical microscopy, micro-Raman spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, high-energy X-ray total scattering experiments, and micro-Fourier transform infrared (micro-FTIR) spectroscopy on shocked labradorite from the Lonar Crater, India. We show that maskelynite of shock class 2 is structurally more similar to fused glass than to crystalline plagioclase. However, there are slight but significant differences – preservation of original pre-impact igneous zoning, anisotropy at Infrared wavelengths, X-ray anisotropy, and preservation of some intermediate range order – which are all consistent with a solid-state transformation formation of maskelynite.

36 MATERIALS SCIENCE↗

A new approach to approximate equation-of-motion coupled cluster with triple excitations

Accurate methods for excited, ionized, and electron-attached states are critical to the study of many chemical species such as reactive intermediates, radicals, and ionized systems. The equation-of-motion coupled cluster singles, doubles, and triples (EOM-CCSDT) family of methods is very accurate (roughly similar in accuracy as for CCSDT calculations of the ground state), but the computational cost scales iteratively as the eighth power of the system size. Many approximations already exist, although most either correct only the excited state or require an iterative $\mathscr{O}$(n 7 ) procedure which can also be prohibitively expensive. In this paper, new methods, termed EOM-CCSD(T)(a) and EOM-CCSD(T)(a)*, are proposed which correct both the ground and excited states based on a shared effective Hamiltonian, and the latter of which includes only non-iterative corrections to both the CCSD and EOM-CCSD energies. These methods are found to significantly improve the description of excited and ionized potential energy surfaces, equilibrium geometries, and harmonic frequencies; the accuracy is very close to that of full EOM-CCSDT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-dependent kinetics of cyclopentene consumption

Recent experiments have uncovered deficiencies in the ability of current kinetic models for cyclopentane combustion to predict species profiles as a function of O2 concentration. One likely source of these discrepancies flows from the limited availability of relevant kinetic data for key functionalized intermediates, requiring the use of distant analogies to estimate their rates. This work fills this gap for cyclopentene, the most prominent C5 intermediate in low-temperature cyclopentane combustion. Ab initio transition-state-theory based master equation methods are used to calculate pressure-dependent rate constants across four potential energy surfaces (C5H8 + OH, C5H8 + HO2, C5H7, and C5H7 + O2). Potential energy surfaces are characterized at the CCSD(T)-F12/cc-pVDZ-F12//revDSD-PBEP86-D3BJ/def2-TZVPP level of theory. Pressure-dependent rate constants and branching fractions are determined via 1D master equation calculations. The results are used to analyze the competition for radicals between cyclopentene and cyclopentane in the intermediate temperature region, and to identify the dominant pathways flowing from these initiation channels. On the OH initiation surface, we find good agreement with recently published experimental rate constants at high temperature, and we elucidate the complex temperature dependence below 800 K, where 𝜋𝜋 addition becomes prominent. On the HO2 initiation surface, we find an interesting alternative route to bicyclic ether formation via well-skipping over the HO2 adduct well. On the cyclopentenyl radical surface, the major product is cyclopentadiene plus H. On the cyclopentenyl + O2 surface, we find that resonance stabilization largely prevents the allylic radical from undergoing oxidation, whereas the alkylic radical has a somewhat elevated propensity for oxidation pathways relative to cyclopentyl.

ab initio calculations↗

A cross-platform execution engine for the quantum intermediate representation

Hybrid languages like the quantum intermediate representation (QIR) are essential for programming systems that mix quantum and conventional computing models, while execution of these programs is often deferred to a system-specific implementation. Here, we develop the QIR Execution Engine (QIR-EE) for parsing, interpreting, and executing QIR across multiple hardware platforms. QIR-EE uses LLVM to execute hybrid instructions specifying quantum programs and, by design, presents extension points that support customized runtime and hardware environments. We demonstrate an implementation that uses the XACC quantum hardware-accelerator library to dispatch prototypical quantum programs on different commercial quantum platforms and numerical simulators, and we validate execution of QIR-EE on IonQ, Quantinuum, and IBM hardware. Our results highlight the efficiency of hybrid executable architectures for handling mixed instructions, managing mixed data, and integrating with quantum computing frameworks to realize cross-platform execution.

LLVM↗

High Fidelity Hybrid Method for In Situ Borehole Stress Determination Final Report

The state of stress in the earth is complicated and it is difficult to determine all three components and directions of the stress. However, the state of stress affects all activities which take place in the earth, from causing earthquakes on critically stressed faults, to affecting production from hydraulically fractured shale reservoirs, to determining closure rates around a subterranean nuclear waste repository. Current state of the art methods commonly have errors in magnitude and direction of up to 40%. This is especially true for the intermediate principal stress. This project seeks to better understand the means which are used to determine the state of stress in the earth and improve upon current methods to decrease the uncertainty in the measurement. This is achieved by a multipronged experimental investigation which is closely coupled with advanced constitutive and numeric modeling.

58 GEOSCIENCES↗

The Electrochemical Sodiation of Sb Investigated by Operando X-ray Absorption and 121 Sb Mössbauer Spectroscopy: What Does One Really Learn?

In this study, we want to highlight the assets and restrictions of X-ray absorption spectroscopy (XAS) and Mössbauer spectroscopy for investigating the mechanism of the electrochemical reaction of antimony electrode materials vs. Na. For this, operando XAS was carried out during the first one and a half cycles, and the whole set of measured data was analysed using a statistical-chemometric approach, while low temperature Mössbauer spectroscopy measurements were carried out ex situ on selected samples stopped at different points of the electrochemical reaction. Complementary ab initio calculations were performed to support the experimental findings. Both techniques show that, upon the first sodiation, most Sb reacts with Na to form disordered Na 3 Sb. This step is accompanied by the formation of amorphous Sb as an intermediate. Upon inversion of the current Na 3 Sb is desodiated and an amorphous Sb phase, distinct from the pristine bulk Sb state, is gradually formed. However, both XAS and Mössbauer spectroscopy were unable to spot the formation of intermediate Na x Sb phases, which were evinced in previous works by operando Pair Distribution Function analyses. The results shown here clearly assign such failure to the intrinsic inability of both techniques to identify these intermediates.

36 MATERIALS SCIENCE↗

Transient Pulse-Response Time-of-Flight Mass Spectrometry for Complex, Deactivating Heterogeneous Catalytic Systems: Application to Ethane Dehydroaromatization

The study of complex, multistep bond-forming and -breaking reactions in heterogeneous catalytic systems often encounters challenges associated with the involvement of large numbers of intermediates among branching pathways. Kinetic information obtained from traditional steady-state measurements can be complemented with that from time-resolved methods to uncover details of the underlying chemistry. Herein, we describe an approach for tracking the complete time-resolved chemical composition (ca. 4–200 u) of a reactor effluent in response to a reactant pulse. We use a six-port rotary valve with a metered sampling loop to pulse reactants at ambient pressure into a flow reactor packed with a catalyst bed within the isothermal region of a heated furnace. The temporal evolution of effluent species is tracked using time-resolved molecular-beam time-of-flight mass spectrometry. We highlight the possibilities that this method has to offer by studying the complex bifunctional mechanism of ethane dehydroaromatization over an HZSM-5-supported platinum catalyst. We demonstrate that energy-tunable ionization sources, which facilitate isomer resolution, enable the measurement of the full mass spectral time-dependent system response. This includes the evolution of major products and mechanistically relevant reactive intermediates such as 1,3-butadiene and cyclopentadiene; these species have not previously been observed from this reaction. In additional studies, we also assess the role of platinum in the catalyst by examining temporal responses to ethane and ethylene feeds. Results show that two temporally distinct formation pathways exist for methane and benzene, and that their importance depends on both catalyst composition and reactant identity. Additionally, characteristics of catalyst deactivation are uniquely observable in the time-resolved mass spectral response, including the selective deactivation of a benzene formation pathway. The combination of time-of-flight mass spectrometry with tunable ionization enables the simultaneous observation of all effluents in a complex mixture of intermediates with isomer/isobar differentiation capabilities that can be applied to any complex reaction system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Arylpalladium Phosphonate Complexes as Reactive Intermediates in Phosphorus-Carbon Bond Forming Reactions

Phosphorus-carbon bond formation from discrete transition metal complexes have been investigated through a combination of synthetic, spectroscopic, crystallographic, and computational methods. Reactive intermediates of the type (diphosphine)Pd(aryl)(P(O)(OEt)(2)) have been prepared, characterized, and studied as possible intermediates in metal-mediated coupling reactions. Several of the reactive intermediates were characterized crystallographicaliy, and a discussion of the solid state structures is presented. In contrast to other carbon-heteroelement bond forming reactions, palladium complexes containing electron-donating substituents on the aromatic fragment exhibited faster rates of reductive elimination. Large bite angle diphosphine ligands induced rapid rates of elimination, while bipyridine and small bite angle diphosphine ligands resulted in much slower rates of elimination. An investigation of the effect of typical impurities on the elimination reaction was carried out. While excess diphosphine, pyridine, and acetonitrile had little effect on the observed rate, the addition of water slowed the phosphorus-carbon bond forming reaction. Coordination of water to the complex was observed spectroscopically and crystallographically. Computational studies were utilized to probe the reaction pathways for P-C bond formation via Pd catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal and photoinduced chemistry of the aromatic Criegee intermediate, benzaldehyde oxide: Implications for indoor air quality

Essential oils contain a complex mixture of volatile organic compounds, ranging from terpenes to aromatics. When released into the indoor air environment or into the atmosphere, they may undergo oxidation to generate complex reactive intermediates that affect indoor air quality. Cinnamaldehyde is one such aromatic molecule that is abundant in essential oils. When released into the indoor air environment, it may undergo oxidation to form a carbonyl oxide (Criegee intermediate) with an aromatic substituent: benzaldehyde oxide. In this manuscript, we present a high-level quantum chemical study that shows that, unlike smaller atmospherically relevant Criegee intermediates, benzaldehyde oxide is expected to undergo solar photolysis on timescales that are competitive with its ground state unimolecular and bimolecular chemistry. We show that aromatic substitution leads to a drastic bathochromic shift in the spectroscopically relevant excited states, revealing that photolysis in the indoor or outdoor environment should not be neglected when modeling the climate and air quality implications of Criegee intermediates with extended conjugation. Here, we predict a range of products that may be important for forming lower volatility compounds via tropospherically relevant photochemistry. To motivate future experimental validation of our results, we propose a viable synthetic procedure of the relevant precursor for generating and stabilizing benzaldehyde oxide.

atmospheric photochemistry↗

Thermal decomposition of neptunyl ammonium nitrate: mechanistic insights and structural characterization of the Np 2 O 5 intermediate phase

Neptunium (Np) possesses a rich and unique chemistry that often diverges from other actinide elements yet remains relatively underexplored compared with the other light actinides. A resurgence of interest in Np has been spurred by the application of 237 Np for plutonium-238 ( 238 Pu) production for use in radioisotope thermoelectric generators (RTGs), necessitating evaluation of Np chemical reactions and materials. The work presented here studied the thermal decomposition of neptunyl ammonium nitrate (NH 4 Np VI O 2 (NO 3 ) 3 ) for synthesis of neptunium dioxide (NpO 2 ), which is the target material used for production of 238 Pu. Additionally, structural characterization of the intermediate solid Np pentoxide (Np 2 O 5 ) was performed. Advanced solid-state characterization techniques, including simultaneous thermal analysis (STA), powder X-ray diffraction (pXRD), Raman spectroscopy, and density functional theory (DFT) modeling have been combined to study the reaction pathways. Analysis revealed that NH 4 Np VI O 2 (NO 3 ) 3 thermally decomposes to a proposed neptunyl nitrate intermediate, followed by Np 2 O 5 and finally NpO 2 , all within the temperature range of 150 °C–600 °C. Further characterization of the pentoxide intermediate provided the first Raman spectra of pure-phase Np 2 O 5 and associated DFT modeling confirmed Raman peak assignments for this phase. These findings provide mechanistic information to advance production of the critical radioisotope 238 Pu and advance the state of knowledge on Np materials chemistry using modern characterization techniques.

Lawson, Kathryn M. [Oak Ridge National Laboratory ↗

LUMINOUS SATELLITES OF EARLY-TYPE GALAXIES. I. SPATIAL DISTRIBUTION

We study the spatial distribution of faint satellites of intermediate redshift (0.1 < z < 0.8), early-type galaxies, selected from the GOODS fields. We combine high-resolution Hubble Space Telescope images and state-of-the-art host subtraction techniques to detect satellites of unprecedented faintness and proximity to intermediate redshift host galaxies (up to 5.5 mag fainter and as close as 0.''5/2.5 kpc to the host centers). We model the spatial distribution of objects near the hosts as a combination of an isotropic, homogeneous background/foreground population and a satellite population with a power-law radial profile and an elliptical angular distribution. We detect a significant population of satellites (N{sub s} = 1.7{sup +0.9}{sub -0.8}) that is comparable to the number of Milky Way satellites with similar host-satellite contrast. The average projected radial profile of the satellite distribution is isothermal ({gamma}{sub p} = -1.0{sup +0.3}{sub -0.4}), which is consistent with the observed central mass density profile of massive early-type galaxies. Furthermore, the satellite distribution is highly anisotropic (isotropy is ruled out at a >99.99% confidence level). Defining {phi} to be the offset between the major axis of the satellite spatial distribution and the major axis of the host light profile, we find a maximum posterior probability of {phi} = 0 and |{phi}| less than 42{sup 0} at the 68% confidence level. The alignment of the satellite distribution with the light of the host is consistent with simulations, assuming that light traces mass for the host galaxy as observed for lens galaxies. The anisotropy of the satellite population enhances its ability to produce the flux ratio anomalies observed in gravitationally lensed quasars.

79 ASTRONOMY AND ASTROPHYSICS↗

A common intermediate for N2 formation in enzymes and zeolites: side-on Cu-nitrosyl complexes

Understanding the mechanisms of catalytic processes requires the identification of reaction centers and key intermediates, both of which are often achieved by the use of spectroscopic characterization tools. Due to the heterogeneity of active centers in heterogeneous catalysts, it is frequently difficult to identify the specific sites that are responsible for the overall activity. Furthermore, the simultaneous presence of a large number of surface species on the catalyst surface often poses a great challenge for the unambiguous determination of the relevant species in the reaction mechanism. In contrast, enzymes possess catalytically active centers with precisely defined coordination environments that are only able to accommodate intermediates relevant to the specific catalytic process. Here we show that side-on Cu+-NO+ complexes characterized by high magnetic field solid state magic angle spinning nuclear magnetic resonance (NMR) and Fourier transform infrared (FTIR) spectroscopies are the key intermediates in the selective catalytic reduction of NO over Cu-SSZ-13 zeolite catalysts. Analogous intermediates have been observed and characterized in nitrite reductase enzymes, and shown to be the critical intermediates in the formation of N2 for anaerobic ammonium oxidation reactions.[1] The identification of this key reaction intermediate, combined with the results of our prior kinetic studies, allows us to propose a new reaction mechanism for the selective catalytic reduction of NO with NH3 under oxygen-rich environments over Cu-SSZ-13 zeolites, a key reaction in automotive emission control. The authors acknowledge the US Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy/Vehicle Technologies Program for the support of this work. The research described in this paper was performed at the Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated for the US DOE by Battelle Memorial Institute.

Environmental Molecular Sciences Laboratory↗

Theoretical Investigation of the Enzymatic Phosphoryl Transfer of β-phosphoglucomutase: Revisiting Both Steps of the Catalytic Cycle

Enzyme catalyzed phosphate transfer is a part of almost all metabolic processes. Such reactions are of central importance for the energy balance in all organisms and play important roles in cellular control at all levels. Mutases transfer a phosphoryl group while nucleases cleave the phosphodiester linkages between two nucleotides. The subject of our present study is the Lactococcus lactis β-phosphoglucomutase (β-PGM), which effectively catalyzes the interconversion of β-D-glucose-1-phosphate (β-G1P) to β- D-glucose-6-phosphate (β-G6P) and vice versa via stabile intermediate β-D-glucose-1,6-(bis)phosphate (β-G1,6diP) in the presence of Mg2+. In this paper we revisited the reaction mechanism of the phosphoryl transfer starting from the bisphosphate β-G1,6diP in both directions (toward β-G1P and β-G6P) combining docking techniques and QM/MM theoretical method at the DFT/PBE0 level of theory. In addition we performed NEB (nudged elastic band) and free energy calculations to optimize the path and to identify the transition states and the energies involved in the catalytic cycle. Our calculations reveal that both steps proceed via dissociative pentacoordinated phosphorane, which is not a stabile intermediate but rather a transition state. In addition to the Mg2+ ion, Ser114 and Lys145 also play important roles in stabilizing the large negative charge on the phosphate through strong coordination with the phosphate oxygens and guiding the phosphate group throughout the catalytic process. The calculated energy barrier of the reaction for the β-G1P to β-G1,6diP step is only slightly higher than for the β-G1,6diP to β-G6P step (16.10 kcal mol-1 versus 15.10 kcal mol-1) and is in excellent agreement with experimental findings (14.65 kcal mol-1).

Environmental Molecular Sciences Laboratory↗

Structure Sensitivity of Acrolein Hydrogenation by Platinum Nanoparticles on Ba x Sr 1- x TiO 3 Nanocuboids

The structure sensitivity of Pt nanoparticles (Pt N ) for gas-phase acrolein (AC) hydrogenation was probed for Pt N on Ba x Sr 1- x TiO 3 nanocuboid supports with (0 0 1) facets in a combined theoretical and experimental study. The in situ selectivity for allyl alcohol increased with the increase of the Sr concentration in the support, which corresponds to modifications in the stable Winterbottom shape and lattice strain of the Pt nanoparticles as a result of the interfacial energy between Pt and the Ba x Sr 1- x TiO 3 supports. “Local model” nanofacets of the Pt surface, edge, and corner morphologies were developed as compact representations of adsorption and reaction sites. DFT was used as the primary modeling tool for the equilibrium adsorption states. We argue that adsorption on edge sites is critically important for the overall allyl alcohol selectivity of Pt N catalysts. A simple model was developed to represent Pt N strain effects caused by its interaction with the substrate. Bader topological atom, spherical volume averaging charge, and modified bond valence sum analyses were used to understand the bonding structure. Density of states analysis was performed for the structures of Pt N , adsorbed AC, and intermediate products to examine adsorbate–particle interactions. The simulated hydrogenation of AC on Pt N nanofacets was compared to the in situ hydrogenation of AC by Pt N on Ba x Sr 1- x TiO 3 to examine the effects of facet, edge, and corner sites on the overall selectivity.

bio-inspired↗

Structural Analysis of Substrate, Reaction Intermediate, and Product Binding in Haemophilus influenzae Biotin Carboxylase

Acetyl-CoA carboxylase catalyzes the first and regulated step in fatty acid synthesis. In most Gram-negative and Gram-positive bacteria, the enzyme is composed of three proteins: biotin carboxylase, a biotin carboxyl carrier protein (BCCP), and carboxyltransferase. The reaction mechanism involves two half-reactions with biotin carboxylase catalyzing the ATP-dependent carboxylation of biotin-BCCP in the first reaction. In the second reaction, carboxyltransferase catalyzes the transfer of the carboxyl group from biotin-BCCP to acetyl-CoA to form malonyl-CoA. In this report, high-resolution crystal structures of biotin carboxylase from Haemophilus influenzae were determined with bicarbonate, the ATP analogue AMPPCP; the carboxyphosphate intermediate analogues, phosphonoacetamide and phosphonoformate; the products ADP and phosphate; and the carboxybiotin analogue N1'-methoxycarbonyl biotin methyl ester. The structures have a common theme in that bicarbonate, phosphate, and the methyl ester of the carboxyl group of N1'-methoxycarbonyl biotin methyl ester all bound in the same pocket in the active site of biotin carboxylase and as such utilize the same set of amino acids for binding. Here, this finding suggests a catalytic mechanism for biotin carboxylase in which the binding pocket that binds tetrahedral phosphate also accommodates and stabilizes a tetrahedral dianionic transition state resulting from direct transfer of CO 2 from the carboxyphosphate intermediate to biotin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Refine your search to explore more results.