Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

The effect of complexing agents on the oriented growth of electrodeposited microcrystalline cuprous oxide film

Highlight: ► Cu{sub 2}O microcrystalline film is electrodeposited on ITO with complexing agents. ► As the stability constant increasing, the overpotential is negatively shifted. ► The formation energy of different planes is affected by overpotential. ► The overpotential can significantly alter the growth priority of different planes. ► The morphology of Cu{sub 2}O film is significantly modified by complexing agents. -- Abstract: Three conventional complexing agents, including lactic acid, citric acid and EDTA, are applied in the electrodeposition of microcrystalline cuprous oxide (Cu{sub 2}O) film on indium tin oxide glass substrate. Both scanning electron microscopy and X-ray diffraction have been performed to characterize the morphology and texture of microcrystalline Cu{sub 2}O film. It is found that the stability constant of copper-based complex compound can obviously influence the deposition overpotential of Cu{sub 2}O, and the overpotential can significantly alter the growth priority of different planes, which results in oriented growth of Cu{sub 2}O grains. The quantitative relationships between the stability constant and the deposition overpotential of different complexing agents, as well as the relationship between the overpotential and the formation energy of microcrystalline cuprous oxide's (1 1 0), (1 1 1) and (2 0 0) planes are calculated, respectively.

36 MATERIALS SCIENCE↗

Structural and optical properties of GaN and InGaN nanoparticles by chemical co-precipitation method

Highlights: ► First report on InGaN NPs by chemical co-precipitation method. ► There is no phase separation in InGaN NPs. ► Both NPs are suitable for optoelectronic devices in the visible region. ► First experimental observation of phonon mode at 272 cm{sup −1} for GaN NPs. ► First report on μ-Raman analysis for InGaN NPs. -- Abstract: A facile method for the synthesis of gallium nitride (GaN) and indium gallium nitride (InGaN) nanoparticles (NPs) has been reported by simple chemical co-precipitation method. The average diameters of the GaN and InGaN NPs were 12 nm and 38 nm respectively. GaN NPs show high crystalline quality with hexagonal structure while InGaN NPs exhibits some cubic inclusion by X-ray diffraction. Room-temperature photoluminescence analysis shows the near-band edge emission at 3.43 eV for GaN and a strong blue emission at 3.0 eV for In{sub 0.4}Ga{sub 0.6}N NPs. The E{sub 2}{sup H} phonon peaks from micro-Raman scattering at 567 cm{sup −1} for GaN and 564 cm{sup −1} for InGaN confirms the wurtzite nature of both the NPs. In addition, we have also assigned some other phonon modes of GaN associated with zone boundary K point of the Brillouin zone which is not experimentally observed for their bulk counterparts.

36 MATERIALS SCIENCE↗

Pulsed electrodeposition and characterization of Bi{sub 2}Te{sub 3−y}Se{sub y} films

Highlights: ► Bi{sub 2}Te{sub 3−y}Se{sub y} films synthesized by pulsed electrodeposition. ► The thermoelectric properties of the film were measured at room temperature. ► The films show much better properties then galvanostatically deposited film. -- Abstract: Bi{sub 2}Te{sub 3−y}Se{sub y} films were synthesized by pulsed electrodeposition on indium tin oxide (ITO)-coated glass substrates from aqueous acidic solution at room temperature. The films were deposited at the same average current density but different cathodic current density. The crystal structure, surface morphology and elemental composition of the films were investigated. Smooth and compact Bi{sub 2}Te{sub 3−y}Se{sub y} films were obtained. As the cathodic current density increased, the grain size of the films decreased. The electrical resistivity and Seebeck coefficient of each Bi{sub 2}Te{sub 3−y}Se{sub y} film were measured after the film being transferred onto a non-conductive rubberized fabric support. The films showed n-type conduction, with Seebeck coefficient in the range of ∼−84 to −92 μV/K and electrical resistivity in the range of 102.9–109.4 μΩ m. The films showed much better thermoelectric properties compared with the film galvanostatically deposited at the same average current density.

36 MATERIALS SCIENCE↗

Investigation of Cu(In,Ga)Se{sub 2} polycrystalline growth: Ga diffusion and surface morphology evolution

Graphical abstract: - Highlights: • Ga diffusion in CIGS absorption layer after annealing treatment. • Phenomenon of surface reconstruction after annealing treatment. • Understand selenium effect on CIGS annealing process. • Explain the kinetic of Ga diffusion and MoSe{sub 2} formation. - Abstract: We report a study of selenization and annealing treatment of copper indium gallium selenide (CIGS) film. Morphologies and composition of surface and cross section were observed by scanning electron microscopy (SEM) equipped with Energy Dispersive Spectroscopy (EDS). X-ray diffraction (XRD) and Raman spectra were used to investigate film structure. Depth profiles of element distributions were detected by Auger electron spectroscopy (AES). A double-layer structure was formed in the film by selenizing metallic precursor at 450 °C. Further annealing at 600 °C in pure argon enhanced gallium diffusion from the bottom to the top of the film, while additional selenium in the annealing had a negative effect. A MoSe{sub 2} layer was detected between CIGS and Mo layers with annealing in additional Se. The annealing treatment also significantly modified the film surface morphology. A large amount of triangular and polygon shaped islands were observed by SEM. That might be due to different nucleation kinetics for different crystal facets.

36 MATERIALS SCIENCE↗

Low temperature and self catalytic growth of ultrafine ITO nanowires by electron beam evaporation method and their optical and electrical properties

Highlights: • ITO nanowires were grown by e-beam evaporation method. • ITO nanowires growth done at low substrate temperature of 350 °C. • Nanowires growth was carried out without use of catalyst and reactive oxygen gas. • Nanowires growth proceeds via self catalytic VLS growth. • Grown nanowires have diameter 10–20 nm and length 1–4 μm long. • ITO nanowire films have shown good antireflection property. - Abstract: We report the self catalytic growth of Sn-doped indium oxide (ITO) nanowires (NWs) over a large area glass and silicon substrates by electron beam evaporation method at low substrate temperatures of 250–400 °C. The ITO NWs growth was carried out without using an additional reactive oxygen gas and a metal catalyst particle. Ultrafine diameter (∼10–15 nm) and micron long ITO NWs growth was observed in a temperature window of 300–400 °C. Transmission electron microscope studies confirmed single crystalline nature of the NWs and energy dispersive spectroscopy studies on the NWs confirmed that the NWs growth proceeds via self catalytic vapor-liquid-solid (VLS) growth mechanism. ITO nanowire films grown on glass substrates at a substrate temperature of 300–400 °C have shown ∼2–6% reflection and ∼70–85% transmission in the visible region. Effect of deposition parameters was systematically investigated. The large area growth of ITO nanowire films would find potential applications in the optoelectronic devices.

36 MATERIALS SCIENCE↗

Pulsed laser irradiation-assisted electrodeposition of germanium in ionic liquid: From amorphous film to polycrystalline branched structures

Highlights: • Ge branched structures was prepared by electrodeposition in ([EMIm]Tf2N) ionic liquid with laser irradiation. • The crystallinity of Ge with laser irradiation is obviously improved compared to the Ge film without laser irradiation. • By controlling the deposition time, the nanostructures with different morphology and size are obtained. - Abstract: The effect of a pulsed laser on the electrodeposition of germanium on indium tin oxide glass in the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIm]Tf{sub 2}N) was investigated. Cyclic voltammetric analysis of GeCl{sub 4} in [EMIm]Tf{sub 2}N showed that laser irradiation produced a positive shift of the reduction potential and an increase in the reduction current. Laser irradiation influenced the morphology and crystallinity of the Ge deposits. A deposition time of 1200 s gave rise to amorphous Ge deposits when laser irradiation was not applied, whereas laser irradiation led to a polycrystalline branched structure. The length and width of the branched structures were about 9.58 and 2.18 μm, respectively, and the average grain size of the sample was ∼76 nm. The morphology and size of the Ge deposits could be controlled by adjusting the deposition time under laser irradiation. The mechanism of growth of the Ge deposits under laser irradiation was discussed in detail.

36 MATERIALS SCIENCE↗

Wafer-scale growth of two-dimensional, phase-pure InSe

Two-dimensional (2D) indium monoselenide (InSe) has attracted significant attention as an ultrathin III–VI semiconductor with a combination of favorable attributes that are comparable to those of III–V semiconductors and van der Waals 2D transition-metal dichalcogenides. Nevertheless, there has been no demonstration of large-area synthesis of 2D InSe due to the complexity of the binary In-Se system and the difficulties in promoting lateral growth. Here, we report the polymorph-selective synthesis of epitaxial 2D InSe by metal-organic chemical vapor deposition (MOCVD) over 2-in wafers. We achieve polymorph-selective epitaxial growth of InSe on c-plane sapphire via flow modulation to control the Se/In ratio. The layer-by-layer growth allows thickness control with tunable optical properties comparable to those of bulk crystals. We also demonstrate gate-tunable electrical transport with a field-effect mobility comparable to that of single-crystalline flakes. Importantly, these results indicate that InSe grown by MOCVD could be an effective channel material for back-end-of-line integration in logic transistors.

2D materials↗

In-situ formation of stable interface towards Li-in anode for halide solid-state electrolyte

Halide-based solid-state electrolytes (SSEs) are promising candidates for next-generation all-solid-state lithium batteries (ASSLBs) due to their high ionic conductivity and chemical stability. However, their poor interfacial compatibility with lithium metal anode and Li-In alloy significantly hinder practical application due to the requirement for a protective interlayer. In this study, a novel approach to overcome this limitation is presented by introducing iron (Fe) doping into Li 3 InCl 6 (LIC), which enables direct and stable contact with lithium-indium (Li-In) metal without a protective interlayer. Thermodynamic and computational analyses identified Fe 3+ as a suitable dopant based on its similar reduction potential to In 3+ and structural compatibility within the halide lattice. The synthesized 10 at. % Fe-doped LIC exhibits high phase purity, retained ionic conductivity, and notably improved interfacial stability. Full-cell tests using Fe-LIC achieve over 300 cycles with 80 % capacity retention. At the same time, symmetric Li-In/ Fe-LIC/ Li-In cells sustain over 500 h of operation, representing the first reported long-term cycling of LIC-based ASSLB without a protective interlayer. In conclusion, this work establishes Fe doping as an effective strategy to stabilize halide SSEs of In system against Li-In alloy, thereby simplifying cell architecture and advancing the development of safer, high-performance halide-based solid-state electrolytes.

Halide-based solid-state electrolytes↗

Self-compensation induced vacancies for significant phonon scattering in InSb

Here, phonon scattering by point defects via mass differences and strain fluctuations could effectively reduce the lattice thermal conductivity. The atomic mass difference can be maximized by introducing the vacancies thus leading to a significant phonon scattering. Usually, the vacancies are introduced by tuning the stoichiometry or forming solid solution with certain compound that contains intrinsically high concentration of vacancies. In this work, we demonstrate that vacancies can be effectively induced by the self-compensation effect via chemical doping. Indium (In) vacancies in InSb were induced by Te-doping and a substantial reduction in thermal conductivity was observed. Room temperature lattice thermal conductivity of the melted and then hot-pressed InSb (without In vacancies) is ~ 14.5 W m –1 K –1 but only ~ 3.8 W m –1 K –1 for InSb 0.96 Te 0.04 (with In vacancies), a reduction of ~ 74%. The advantage of using this strategy for phonon engineering lies in the fact that a substantial reduction in thermal conductivity can be achieved even when the dopant concentration is rather low. Since the self-compensation effect is widely observed in different compounds, it indicates that the vacancy engineering strategy used here is also applicable to a variety of other materials to effectively reduce the lattice thermal conductivity.

36 MATERIALS SCIENCE↗

Phosphonic-Acid-Reinforced Polymer Hole Transport Layers for Deployable p-i-n Perovskite Photovoltaics

The long-term durability prospects of halide perovskite solar cells are rapidly improving; however, the interface between the hole transport layer (HTL) and the perovskite remains a source of degradation. Alone, polymer- or carbazole-based HTLs suffer from incomplete coverage of the underlying indium tin oxide glass, leading to degradation and compromised performance. Here, we show a multi-HTL approach whereby a polymer HTL is reinforced using a phosphonic acid modification leading to better protection of the buried perovskite interface and more columnar growth of perovskite film, resulting in an ~40-mV open-circuit voltage (VOC) improvement indicative of suppressed interfacial recombination across multiple p-i-n device architectures. Solar cells with this reinforced HTL show higher tolerance to several accelerated stress tests. We report, among the best durabilities for unencapsulated cells, a T90 ~3,000 h (T80 ~5,900 h) at 65 degrees C under continuous 1.2 sun AM 1.5G illumination and maximum power point tracking, representing a nearly 4-fold increase compared with [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz)-only devices. Furthermore, we deployed a device with this reinforced HTL on a cube satellite, with long-duration operational space testing results exceeding T80 for the complete mission duration of ~100 days in low Earth orbit.

14 SOLAR ENERGY↗

Material and detector properties of cadmium manganese telluride (Cd 1-x Mn x Te) crystals grown by the modified floating-zone method

We demonstrated the material- and radiation-detection properties of cadmium manganese telluride (Cd 1-x Mn x Te; x=0.06), a wide-band-gap semiconductor crystal grown by the modified floating-zone method. We investigated the presence of various bulk defects, such as Te inclusions, twins, and dislocations of several as-grown indium-doped Cd 1-x Mn x Te crystals using different techniques, viz., IR transmission microscopy, and chemical etching. We then fabricated four planar detectors from selected CdMnTe crystals, characterized their electrical properties, and tested their performance as room-temperature X- and gamma-ray detectors. Thus, our experimental results show that CMT crystals grown by the modified floating zone method apparently are free from Te inclusions. However, we still need to optimize our growth parameters to attain high-resistivity, large-volume single-crystal CdMnTe.

36 MATERIALS SCIENCE↗

Design, construction, and characterization of a compact DD neutron generator designed for 40Ar/39Ar geochronology

A next-generation, high-flux DD neutron generator has been designed, commissioned, and characterized, and is now operational in a new facility at the University of California Berkeley. The generator, originally designed for 40 Ar/ 39 Ar dating of geological materials, has since served numerous additional applications, including medical isotope production studies, with others planned for the near future. In this work, we present an overview of the High Flux Neutron Generator (HFNG) which includes a variety of simulations, analytical models, and experimental validation of results. Extensive analysis was performed in order to characterize the neutron yield, flux, and energy distribution at specific locations where samples may be loaded for irradiation. A notable design feature of the HFNG is the possibility for sample irradiation internal to the cathode, just 8 mm away from the neutron production site, thus maximizing the neutron flux (n/cm 2 /s). The generator’s maximum neutron flux at this irradiation position is 2.58 x 10 7 n/cm 2 /s ± 5% (approximately 3 x 10 8 n/s total yield) as measured via activation of small natural indium foils. However, future development is aimed at achieving an order of magnitude increase in flux. Additionally, the deuterium ion beam optics were optimized by simulations for various extraction configurations in order to achieve a uniform neutron flux distribution and an acceptable heat load. Finally, experiments were performed in order to benchmark the modeling and characterization of the HFNG.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electrical injection and transport in Teflon-diluted hole transport materials

Diluting small molecule organic semiconductor hole transport materials with Teflon AF (TAF) dramatically increases their thermal/morphological stability while counterintuitively also increasing the current density in hole-only diodes. Here, we explore the origin of this current enhancement in co-evaporated blends of TAF and N,N'-Di(1-naphthyl)-N,N'-diphenyl-(1,1'-biphenyl)-4,4'-diamine (NPD) and find that it results from improved hole injection and not from a mobility enhancement due to semiconductor dilution effects. Whereas electroabsorption measurements indicate that an interface dipole shift of up to 0.5 eV (depending on TAF concentration) aides hole injection at the indium-tin-oxide anode, time-of-flight and temperature-dependent current-voltage measurements show that the mobility of 25 vol% TAF:NPD blends decreases by roughly an order of magnitude relative to neat NPD despite having slightly lower energetic disorder. For comparison, diluting with 25 vol% high density polyethylene achieves a similar reduction in energetic disorder but only decreases the mobility by a factor of two. Furthermore, these results highlight the tradeoff between reducing energetic disorder and frustrating percolation in diluted organic semiconductors, and represent a step toward thermally-evaporated polymer-small molecule composites that maintain high mobility while offering improved morphological stability and lower refractive index for organic light emitting diodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stretchable and wearable polymeric heaters and strain sensors fabricated using liquid metals

Wearable electronic devices (WEDs) are receiving significant attention because of the increasing interest in soft robotics, electronic skin, and wearable sensors. Liquid metals (LMs) are compelling for WEDs owing to their metallic conductivity, fluidic nature, and low toxicity. For this study, we fabricated stretchable and soft WEDs using LM (eutectic gallium-indium alloy) wires (LMWs) patterned via force wetting through custom-made stencils on an elastic substrate. LMWs can generate thermal energy via Joule heating upon current application and deliver it to the substrate, resulting in wearable polymeric heaters. The LM mixed with carbonyl iron particles (CIPs) can also be patterned while preserving fluidic behavior. The degree of thermal energy generated through the LMWs can be manipulated as a function of the CIP concentration in the LM and geometrical factors of the electrode patterns, i.e., width and length. An elastic film patterned with LMWs attached to the human body exhibits changes in the effective electrical resistance depending on applied strain, demonstrating potential as a wearable strain sensor. This LM utilized WED that can generate thermal energy upon current application through the LMWs and detect the bodily motion has significant potential for application in wearable thermotherapy, electronic skin, and soft sensors.

47 OTHER INSTRUMENTATION↗

Development and testing of an electrochemical methane sensor

In this article, the development of an electrochemical methane sensor is presented. The mixed potential based sensor is based on tin doped indium oxide (ITO) and platinum electrodes and yttria-stabilized zirconia (YSZ) electrolyte. The sensor was fabricated using the inexpensive tape-cast method. The sensor responded to methane with a response time of 15 s. The staircase response to methane indicated a 44 mV sensor response to 100 ppm of methane. The sensor response indicated a log-linear relationship with the methane concentration. Upon 500 h of sensor testing, a 5% reduction in methane sensitivity was observed. The cross-sensitivity study on the sensor indicated minimal interference to NO, NO 2 , and CO 2 . To improve the sensitivity to methane, a signal conditioning method referred to as the pulsed discharge technique (PDT) was applied. Finally, a fourfold increase in methane sensitivity was observed when the sensor was subjected to PDT. Future studies include the miniaturization of the sensor with integrated heater design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal performance analysis of an electrochromic vacuum glazing with low emittance coatings

Thermal performance of an electrochromic (EC) vacuum glazing (VG) was modelled under ASTM standard winter conditions. The EC VG comprised three 0.5 m by 0.5 m glass panes with a 0.12 mm wide evacuated space between two 4 mm thick panes sealed contiguously by a 6 mm wide indium based edge seal with either one or two low-emittance (low-e) coatings supported by a 0.32 mm diameter square pillar grid spaced at 25 mm. The third glass pane on which the 0.1 mm thick EC layer was deposited was sealed to the evacuated glass unit. The whole unit was rebated by 10 mm within a solid wood frame. The low-e coating absorbed 10% of solar energy incident on it. With the EC VG installed with the EC component facing the outdoor environment, for an incident solar radiation of 300 W m{sup -2}, simulations demonstrated that when the EC layer is opaque for winter conditions, the temperature of the inside glass pane is higher than the indoor air temperature, due to solar radiation absorbed by the low-e coatings and the EC layer, the EC VG is a heat source with heat transferred from the glazing to the interior environment. When the emittance was lower to 0.02, the outdoor and indoor glass pane temperatures of the glazing with single and two low-e coatings are very close to each other. For an insolation of 1000 W m{sup -2}, the outdoor glass pane temperature exceeds the indoor glass pane temperature, consequentially the outdoor glass pane transfers heat to the indoor glass pane. (author)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Printed interconnects for photovoltaic modules

Film-based photovoltaic modules employ monolithic interconnects to minimize resistance loss and enhance module voltage via series connection. Conventional interconnect construction occurs sequentially, with a scribing step following deposition of the bottom electrode, a second scribe after deposition of absorber and intermediate layers, and a third following deposition of the top electrode. This method produces interconnect widths of about 300 µm, and the area comprised by interconnects within a module (generally about 3%) does not contribute to power generation. The present work reports on an increasingly popular strategy capable of reducing the interconnect width to less than 100 µm: printing interconnects. Cost modeling projects a savings of about $0.02/watt for CdTe module production through the use of printed interconnects, with savings coming from both reduced capital expense and increased module power output. Printed interconnect demonstrations with copper-indium-gallium-diselenide and cadmium-telluride solar cells show successful voltage addition and miniaturization down to 250 µm. As a result, material selection guidelines and considerations for commercialization are discussed.

14 SOLAR ENERGY↗

Semi-transparent p-type barium copper sulfide as a back contact interface layer for cadmium telluride solar cells

Optically transparent p-type materials play a critical role in transparent electronics including photovoltaic (PV) devices. P-type sulfide materials offer an alternative to oxides for PV application due to improved hole transport properties. Here, we report the solution-based synthesis of earth-abundant p-type transparent conducting barium copper sulfide (α-BaCu 4 S 3 , BCS) thin films. These films were characterized using scanning electron microscopy, X-ray diffraction, UV–Vis–NIR spectrophotometry, Raman spectroscopy, and spectroscopic ellipsometry. BCS films of ~100 nm thickness transmit >70% of visible light. We report on tests of the hole transport properties of these BCS films for cadmium telluride (CdTe) photovoltaics, finding that the BCS deposition process forms a beneficial tellurium (Te) rich surface on CdTe by selectively removing Cd from the surface. Based on our study, the BCS interface layer plays dual functions for CdTe PV devices as a hole transport material and as an etchant, enhancing the resulting device performance. We observed a significant increase in open-circuit voltage of CdTe solar cells with the BCS buffer layer. Furthermore, we discuss semitransparent CdTe solar cells with BCS as a hole transport layer and indium tin oxide as a finishing electrode. Semitransparent CdTe solar cells shows 13.3% conversion efficiency for the front side illumination and 1.2% efficiency for back side illumination, indicating high recombination of charge carriers generated close to the rear CdTe/BCS/ITO contact.

36 MATERIALS SCIENCE↗

Refine your search to explore more results.