Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Homogenization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Fundamental Insights into the Reactivity and Utilization of Open Metal Sites in Cu(I)-MFU-4 l

Metal organic frameworks (MOFs) having open metal sites have the potential to approach the activity of homogeneous organometallic complexes, thus combining the advantages of homogeneous and heterogeneous catalysis. We pre-sent a fundamental study of the effectiveness of incorporating open metal sites into MOFs. We have modeled the binding of a series of adsorbates in a Cu(I) substituted MOF, Cu(I)-MFU-4l using density functional theory, and compared the activity of the Cu(I) sites in Cu(I)-MFU-4l with two different Cu(I) scorpionate complexes. The computational results confirm the single-site nature of the Cu(I) active site. This is further supported by complementary experiments to measure the chemisorption uptake inside our synthesized samples in order to estimate the amount of active Cu sites present. We observed a level of chemisorption that is roughly half the theoretical maximum, which implies that only half of the Cu atoms incorporated into MFU-4l via metal-ion exchange are able to act as binding sites. We speculate that the inactive Cu atoms are coordinately saturated Cu(II) sites. Furthermore, our work suggests that the performance of Cu(I)-MFU-4l could be significantly increased by optimizing the metal exchange and activation processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanistic Insights into C–H Borylation of Arenes with Organoiridium Catalysts Embedded in a Microporous Metal–Organic Framework

Organometallic iridium catalysts can be used in conjunction with bispinacolatodiboron (B 2 Pin 2 ) to effect the borylation of a variety of substrates such as arenes, alkanes, heteroarenes, and oxygenates. Recently, efforts have also focused on integrating these catalysts into porous supports, such as metal–organic frameworks (MOFs). While the mechanism of homogeneous borylation systems has been thoroughly investigated experimentally and computationally, analogous studies in MOF-supported iridium catalysts have not been conducted. In this paper, we report the mechanistic investigation of a phenanthroline-iridium catalyst immobilized in the organic linker of Universitetet i Oslo (UiO)-67 (Zr 6 O 4 (OH) 4 (BPDC) 4 (PhenDC) 2 , BPDC = biphenyl-4,4'-dicarboxylate, PhenDC = 1,10-phenanthroline-4,4'-dicarboxylate). By using benzene as a model substrate, variable time normalization analysis (VTNA) of the kinetic data suggested a rate law consistent with zero-order in B 2 Pin 2 , and first-order in arene. A primary kinetic isotope effect (KIE) in the time course of benzene-d 6 borylation also provided complementary information about the role of the arene in the rate-determining step of the reaction. Characterization by techniques such as X-ray absorption spectroscopy (XAS) confirmed the presence of Ir(III), while pair distribution function (PDF) analysis suggested structures containing an Ir–Cl bond, further substantiated by X-ray photoelectron spectroscopy (XPS). Analysis of postcatalysis materials by inductively coupled plasma–optical emission spectroscopy (ICP-OES) revealed low boron accumulation, which may indicate an absence of boron in the resting state of the catalyst. Finally, in comparing borylation of benzene and toluene, a slight selectivity for benzene is observed, which is similar to the analogous homogeneous reaction, indicating the influence of substrate sterics on reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Shifting Valencies and Magnetic Responses in La-Based High-Entropy Oxide Perovskite Thin Films with Variable Mn Presence

Chemical disorder in compositionally complex perovskite oxides generates a broad distribution of exchange pathways and spin states, but the microscopic origin and spatial homogeneity of the resulting magnetic phases remain debated. Here, we tune the Mn fraction (x = 0.2–0.6) in epitaxial La(Cr, Mn, Fe, Co, Ni)O3 thin films and resolve the coupled evolution of valence, spin state, and magnetism using element-specific x-ray absorption spectroscopy and x-ray magnetic circular dichroism (XMCD). Mn enrichment drives an internal redistribution of charge, in which Mn evolves toward a Mn3+-rich mixed valence, while Co converts from predominantly Co3+ to high-spin Co2+. This valence/spin-state coupling amplifies the Mn- and Co-derived ferromagnetic response by nearly an order of magnitude while increasing the magnetic onset temperature to at least 250 K, whereas Fe and Cr remain essentially trivalent with weak dichroism. Depth-resolved low-energy muon spin spectroscopy (LE-μSR) shows magnetic homogeneity through the film thickness, with a secondary relaxation maximum near 25 K indicating a low-temperature dynamical crossover consistent with frustrated magnetism in a strongly disordered spin lattice.

Miertschin, Duncan [Baylor University]↗

ZnxMn1-xO Solid Solutions in the Rocksalt Structure: Optical, Charge Transport, and Photoelectrochemical Properties

Theoretical predictions of ZnO:MnO solid solutions (abbreviated here as ZMO) with the rocksalt-type structure suggest improved visible light absorption and suitable band edge positions for the overall water splitting reaction, but experimental efforts to produce such phases are limited by the low solubility of Zn within this structure type. Here, we produce solid solutions of ZnxMn1-xO, with x = 0.5 and 0.3 in the metastable rocksalt phase, using high-pressure and high-temperature (HPHT) techniques. X-ray diffraction and electron microscopy methods were employed to determine the crystal structure, chemical composition, and homogeneity on the submicron scale. The solid solutions exhibit increased optical absorbance in the visible spectral range as compared to those of the parent oxides ZnO and MnO. Our theoretical calculations for ZnxMn1-xO with x = 0.5, 0.25 predict band gaps of 2.53 and 2.98 eV, respectively, with an unusually large band gap bowing. Our calculations also show small effective electron mass for these materials indicating their potential for solar energy applications. Initial photoelectrochemical tests reveal that ZMO solid solutions are suitable for water oxidation and warrant further experimental optimization.

36 MATERIALS SCIENCE↗

Understanding the Role of Temperature and Cathode Composition on Interface and Bulk: Optimizing Aluminum Oxide Coatings for Li-Ion Cathodes

Here, surface coating of cathode materials with Al 2 O 3 has been shown to be a promising method for cathode stabilization and improved cycling performance at high operating voltages. However, a detailed understanding on how coating process and cathode composition changes the chemical composition, morphology and distribution of coating within cathode interface and bulk lattice, is still missing. In this study, we use a wet-chemical method to synthesize a series of Al 2 O 3 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 and LiCoO 2 cathodes treated under various annealing temperatures and a combination of structural characterization techniques to understand the composition, homogeneity and morphology of coating layer and the bulk cathode. Nuclear magnetic resonance and electron microscopy results reveal that the nature of the interface is highly depended on the annealing temperature and cathode composition. For Al 2 O 3 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 , higher annealing temperature leads to more homogeneous and more closely attached coating on cathode materials, corresponding to better electrochemical performance. Lower Al 2 O 3 coating content is found to be helpful to further improve the initial capacity and cyclability, which can greatly outperform the pristine cathode material. For Al 2 O 3 -coated LiCoO 2 , the incorporation of Al into the cathode lattice is observed after annealing at high temperatures, implying the transformation from “surface coatings” to “dopants”, which is not observed for LiNi 0.5 Co 0.2 Mn 0.3 O 2 . As a result, Al 2 O 3 -coated LiCoO 2 annealed at higher temperature shows similar initial capacity but lower retention compared to that annealed at a lower temperature, due to the intercalation of surface alumina into the bulk layered structure forming a solid solution.

25 ENERGY STORAGE↗

Poly(alkyl methacrylate) Brush-Grafted Silica Nanoparticles as Oil Lubricant Additives: Effects of Alkyl Pendant Groups on Oil Dispersibility, Stability, and Lubrication Property

This paper reports on the synthesis of a series of poly(alkyl methacrylate) brush-grafted, 23 nm silica nanoparticles (hairy NPs) and the study of the effect of alkyl pendant length on their use as oil lubricant additives for friction and wear reduction. The hairy NPs were prepared by surface-initiated reversible addition–fragmentation chain transfer polymerization from trithiocarbonate chain transfer agent (CTA)-functionalized silica NPs in the presence of a free CTA. We found that hairy NPs with sufficiently long alkyl pendant groups (containing >8 carbon atoms, such as 12, 13, 16, and 18 in this study) could be readily dispersed in poly(alphaolefin) (PAO), forming clear, homogeneous dispersions, and exhibited excellent stability at low and high temperatures as revealed by visual inspection and dynamic light scattering studies. Whereas poly(n-hexyl methacrylate) hairy NPs cannot be dispersed in PAO under ambient conditions or at 80 °C, interestingly, poly(2-ethylhexyl methacrylate) hairy NPs can be dispersed in PAO at 80 °C but not at room temperature, with a reversible clear-to-cloudy transition observed upon cooling. High-contact-stress ball-on-flat reciprocating sliding tribological tests at 100 °C showed significant reductions in both the coefficient of friction (up to 38%) and wear volume (up to 90% for iron flat) for transparent, homogeneous dispersions of hairy NPs in PAO at a concentration of 1.0 wt % compared with neat PAO. Finally, the formation of a load-bearing tribofilm at the rubbing interface was confirmed using scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy.

36 MATERIALS SCIENCE↗

Chemically Active, Porous 3D-Printed Thermoplastic Composites

Metal-organic frameworks (MOFs) exhibit exceptional properties and are widely investigated because of their structural and functional versatility relevant to catalysis, separations, and sensing applications. However, their commercial or large-scale application is often limited by their powder forms. To address this, we report the production of MOF-thermoplastic polymer composites accessed via a standard 3D printer. MOFs (Zeolitic imidazolate framework; ZIF-8) were successfully incorporated homogeneously into both poly(lactic acid) (PLA) and thermoplastic polyurethane (TPU) matrices, extruded into filaments, and utilized for on-demand access to 3D structures by fused-deposition modeling. Printed rigid PLA-MOF composites displayed good structural integrity, high surface area ((SA)avg = 531 m2 g-1) and hierarchical pore features. Flexible TPU-MOF composites (SAavg = 706 m2 g-1) were achieved by employing a sacrificial fluoropolymer readily removed post-printing. Critically, embedded particles in the plastic matrices retain their ability to participate in chemical interactions characteristic of the parent MOF. The fabrication strategies can be extended to other MOFs and illustrate the potential of 3D printing to create unique porous and high surface area chemically-active structures.

Additive Manufacturing, Metal-Organic Framework, 3↗

Covalent-Organic Frameworks Composed of Rhenium Bipyridine and Metal Porphyrins: Designing Heterobimetallic Frameworks with Two Distinct Metal Sites

The incorporation of homogeneous catalysts for CO 2 reduction into extended frameworks has been a successful strategy for increasing catalyst lifetime and activity, but the effects of the linkers on catalysis are underexplored. In this work, a novel rhenium bipyridine complex was synthesized for the purpose of designing a covalent-organic framework (COF) with both metalloporphyrin and metal bipyridine moieties. Investigation of the rhenium complex as a homogeneous catalyst shows a faradaic efficiency of 81(8)% for the electrocatalytic conversion of CO 2 to CO upon the addition of methanol as the proton source. Treatment of the rhenium complex with tetra(4-aminophenyl)porphyrin under Schiff base conditions produces the desired COF, as indicated by powder X-ray diffraction (PXRD) studies. Metalation of the porphyrins was accomplished through postsynthetic modification with CoCl 2 and FeCl 3 metal precursors. The retention of the PXRD peaks and appearance of new Co and Fe peaks in the corresponding X-ray photoelectron spectroscopy spectra suggest the successful incorporation of a secondary metal site into the framework. Cyclic voltammetry measurements display increases in current densities when the atmosphere is changed from N 2 to CO 2 . Finally, controlled potential electrolyses show that the cobalt-postmetalated COF has the highest activity toward CO 2 reduction, reaching a faradaic efficiency of 18(2)%.

36 MATERIALS SCIENCE↗

Surface Gradient Ti-Doped MnO 2 Nanowires for High-Rate and Long-Life Lithium Battery

Cryptomelane-type a-MnO 2 has been demonstrated as a promising anode material for high-energy Li-ion batteries (LIBs) due to its high capacity and intriguing [2 × 2] tunnel structure. However, applications of MnO 2 electrode especially at high current rates and mass active material loading are limited by the poor mechanical stability, unstable solid electrolyte interphase (SEI) layer, and low reversibility of conversion reactions. Here, we report a design of homogeneous core-shell MnO 2 nanowires (NWs) created by near-surface gradient Ti doping (Ti-MnO 2 NWs). Such a structurally-coherent core-shell configuration endowed gradient volume expansion from inner core to outer shell, which could effectively release the stress of the NW lattice during the cycling and avoid the pulverization of the electrode. In this way, the Ti-MnO 2 NWs achieved a high reversible capacity (766 mAh g -1 at 200 mA g -1 ), a superior round-trip efficiency (coulombic efficiency achieved above 99.5% after only 30 cycles), and a long lifetime (a capacity of 742 mAh g -1 after 3000 cycle at 10 A g -1 ). In addition, the detailed conversion reaction mechanism was investigated through in-situ TEM, which further evidenced the unique homogeneous core-shell structure could largely suppress the separation of core and shell upon charging and discharging. This new NW configuration could benefit the design of other large-volume-change lithium battery anode materials.

Zhao, Kangning↗

Scalable Freeze-Tape-Casting Fabrication and Pore Structure Analysis of 3D LLZO Solid-State Electrolytes

Nonflammable solid-state electrolytes can potentially address the reliability and energy density limitations of lithium-ion batteries. Garnet-structured oxides such as Li 7 La 3 Zr 2 O 12 (LLZO) are some of the most promising candidates for solid-state devices. Here, three-dimensional (3D) solid-state LLZO frameworks with low tortuosity pore channels are proposed as scaffolds, into which active materials and other components can be infiltrated to make composite electrodes for solid-state batteries. To make the scaffolds, we employed aqueous freeze tape casting (FTC), a scalable and environmentally friendly method to produce porous LLZO structures. Using synchrotron radiation hard X-ray microcomputed tomography, we confirmed that LLZO films with porosities of up to 75% were successfully fabricated from slurries with a relatively wide concentration range. The acicular pore size and shape at different depths of scaffolds were quantified by fitting the pore shapes with ellipses, determining the long and short axes and their ratios, and investigating the equivalent diameter distribution. The results show that relatively homogeneous pore sizes and shapes were sustained over a long range along the thickness of the scaffold. Additionally, these pores had low tortuosity and the wall thickness distributions were found to be highly homogeneous. These are desirable characteristics for 3D solid electrolytes for composite electrodes, in terms of both the ease of active material infiltration and also minimization of Li diffusion distances in electrodes. The advantages of the FTC scaffolds are demonstrated by the improved conductivity of LLZO scaffolds infiltrated with poly(ethylene oxide)/lithium bis(trifluoromethanesulfonyl)imide (PEO/LITFSI) compared to those of PEO/LiTFSI films alone or composites containing LLZO particles.

36 MATERIALS SCIENCE↗

Probing Clustering Dynamics between Silicon and PAA or LiPAA Slurries under Processing Conditions

This work explores the complex interplay between slurry aggregation, agglomeration, and conformation (i.e., shape) of poly(acrylic acid) (PAA)- and lithiated PAA-based silicon slurries as a function of the shear rate and the resulting slurry homogeneity. These values were measured by small-angle neutron scattering (SANS) and rheology-coupled ultra-SANS at conditions relevant to battery electrode casting. Different binder solution preparation methods, either a ball milling (BM) process or a planetary centrifugal mixing (PCM) process, dramatically modify the resulting polymer dynamics and organization around a silicon material. This is due to the different energy profiles of mixing where the more violent and higher energy PCM causes extensive breakdown and reformation of the binder, which is now likely in a branched conformation, while the lower energy BM results in simply lower-molecular weight linear polymers. In conclusion, the breakdown and reorganization of the polymer structure affect silicon slurry homogeneity, which affects subsequent electrode architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Static and Dynamic Thermomechanical Properties of Phase-Separated Epoxy Networks with Tuned Microstructures

Here, polymerization-induced phase separation is a useful method for the construction of heterogeneous epoxy networks with properties exceeding their homogeneous counterparts. In this work, we examine the static and dynamic thermomechanical properties of phase-separated epoxy networks salient to their application as encapsulants. Three heterogeneous epoxy-amine networks with nano-, meso-, and macro-phase-separated morphologies comprised of hard and soft domains are compared to a rigid, unstructured network. The glass transition profiles of the heterogeneous networks are complex, spanning many decades in the frequency domain. The nanophase-separated morphology leads to higher coefficient of thermal expansion, yet surprisingly is characterized by reduced residual stress. Under both quasi-static and dynamic compression (strain rates of order 10 –3 and 10 3 s –1 , respectively), the nanophase-separated network also exhibits higher modulus and strength. In split-Hopkinson bar experiments, the energy dissipation characteristics of the epoxy networks were nearly identical. Curiously, however, the Hugoniot response of the macro-phase-separated network determined by ballistic shockwave analysis indicates a remarkable ability of this material to mitigate shockwave propagation in comparison to many homogeneous and heterogeneous polymer materials. Collectively, this work reveals several previously unreported phenomena with respect to structure–property relationships in phase-separated epoxy networks, illustrating the potential value of systematically tuned microstructures for optimization of application-specific physical properties.

36 MATERIALS SCIENCE↗

The Role of Protons and Hydrides in the Catalytic Hydrogenolysis of Guaiacol at the Ruthenium Nanoparticle-water Interface

The mechanistic roles of free hydronium ions, surface hydrides, and interfacial protons during guaiacol hydrodeoxygenation (HDO) on ruthenium nanoparticles are established. As guaiacol adsorbs on Ru, it loses its strong aromaticity and undergoes a rapid H-shift from its hydroxyl to meta carbons (in relation to its hydroxyl group), leading enol and keto surface isomers to exist in chemical equilibrium. HDO occurs via a hydridic H-adatom (H*) attack to the enol, followed by a kinetically relevant C-O bond rupture step, during which water shuttles the hydroxyl proton, enabling its intramolecular attack to the methoxy, evolving a high charged [Ru(s)-(C6H5O-)…(H+)…OCH3]† transition state. The competing HYD begins with a rapid H* attack to the keto, before a second, kinetically relevant H* attack, without proton involvement. Water, despite shifting the thermodynamics towards the more polar surface keto, promotes HDO to a much greater extent than HYD, because of its dual catalytic roles—it mobilizes hydroxyl proton (Brønsted acid) to cleave the strong C-O bond, synchronizing with the Ru metal surface (base) function that stabilizes the resulting [Ru(s)-(C6H5O-)…(H+)…OCH3]† transition state, and the water layers solvate this charged transition state, further reducing its free energy. Free hydronium ions do catalyze a separate homogeneous enol-keto isomerization, but this reaction is kinetically unrelated to HDO catalysis. This mechanistic picture explains the strong effects of polar protic solvent in hydrodeoxygenation, highlighting (i) the requirements of surface hydrides and interfacial protons acting in tandem to complete a HDO turnover and (ii) the cooperative role of protic solvent and metal surface in breaking the aromaticity and stabilizing charged reactive precursors and transition states.

Shangguan, Junnan↗

Gas-Phase Dimerization of Ethylene under Mild Conditions Catalyzed by MOF Materials Containing (bpy)Ni II Complexes

NU-1000-(bpy)Ni II , a highly porous MOF material possessing well-defined (bpy)Ni II moieties, was prepared through solvent-assisted ligand incorporation (SALI). Treatment with Et 2 AlCl affords a single-site catalyst with excellent catalytic activity for ethylene dimerization (intrinsic activity for butenes that is up to an order of magnitude higher than the corresponding (bpy)NiCl 2 homogeneous analogue) and stability (can be reused at least three times). The high porosity of this catalyst results in outstanding levels of activity at ambient temperature in gas-phase ethylene dimerization reactions, both under batch and continuous flow conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanocluster Active Sites Formed on Heterogeneous Thermal Catalysts and Electrocatalysts by Operando Reactive Environments

Here, in this Viewpoint, we summarize our recent studies in this endeavor, ending with a forward-looking perspective into the remaining challenges and open questions for consideration by the catalysis community. Through a computationally efficient framework of systematically investigating metal atom ejection from and migration onto metal surfaces, leading to the formation of metal atom clusters, we show that the surface of a metal catalyst is dynamic and much less rigid than previously thought. We suggest that the operando formed metal atom clusters are novel active sites, which can dominate the activity of steps or kinks (let aside terraces) from where their constituent atoms were ejected. Through more readily responding to reaction conditions by forming catalytically active clusters, solid metal catalysts approach not only homogeneous catalyst motifs, thus establishing a bridge between homogeneous and heterogeneous catalysis, but also liquid metals which have been suggested to be better than traditional heterogeneous catalysts.

adsorption↗

Enhanced Activity in Layered Metal-Oxide-Based Oxygen Evolution Catalysts by Layer-by-Layer Modulation of Metal-Ion Identity

Few-layered potassium nickel and cobalt oxides show drastic differences in catalytic activity based on metal ion preorganization. Uniform compositions [(CoO 2 /K) 6 or (NiO 2 /K) 6 ] show limited activity, while homogeneously mixed-metal cobalt/nickel oxides [(Co n Ni (1–n) O 2 /K) 6 ] display moderate improvement. However, a layer-by-layer arrangement of alternating cobalt and nickel oxide sheets [e.g., (CoO 2 /K/NiO 2 /K)] provides superior catalytic performance, reducing the oxygen evolution overpotential by ∼200–400 mV. Density functional theory simulations provide an illustration of the electronic properties (density of states and localization of orbitals) that promote catalysis in the layer-segregated materials over those of homogeneous composition. This study reveals that atomic preorganization of metal ions within layered catalysts plays a more crucial role than the overall metal composition in enhancing catalytic efficiency for oxygen evolution.

catalysts↗

Liquid-Phase Modeling in Heterogeneous Catalysis

The notion that solvents can affect the chemical reactivity has been prevalent in the homogeneous catalysis community, going back as far as 1863.(1) Remarkable changes in reaction rate have been reported in the seminal work of Menschutkin, who demonstrated a change in reaction rate constant up to a factor of 700 as a function of the solvents employed for the reaction of triethylamine with ethyl iodide at 373 K.(2) It is well-known nowadays that solvents can affect the reaction rate, reaction mechanism, and selectivity of chemical reactions occurring in condensed phase. While solvent effects usually lead to changes in reaction rates of up to 3 orders of magnitude, rate increases of 9 orders of magnitude have been reported.(3, 4) In homogeneous metal catalysis such as hydroformylation, hydrogenation, and cross-coupling reactions, solvent effects have been studied systematically and exploited for industrial applications.(5) Substantial solvent effects have also been reported in heterogeneous catalysis for several hydrogenation,(6-9) oxidation,(10-12) and electrochemical reactions (where electric field effects lead in addition to an electric double layer(13-16)). However, in heterogeneous catalysis, systematic studies of solvation effects are rare, and solvent effects are generally not well understood. In this context, we note that liquid-phase processing is highly desirable for process cost reduction and high product selectivity for the heterogeneously catalyzed conversion of highly functionalized lignocellulosic biomass, because the feedstocks contain significant amounts of water, are produced in aqueous-phase environments, and reactant molecules are highly water-soluble, reactive, and thermally unstable.(17-19) Processing at relatively low temperatures in condensed phase has therefore the potential to (1) minimize undesirable thermal degradation reactions, (2) increase the targeted product selectivity, and (3) facilitate the product separation from excess water because reaction products often contain less oxygen and are therefore less hydrophilic than the feed streams.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Refine your search to explore more results.