Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Drive systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Development of the cryogenic tunnel concept and application to the US National Transonic Facility

A fan-driven, high Reynolds number, transonic cryogenic wind tunnel is described. The tunnel has a 2.5- by 2.5 m test section and is capable of operating from ambient to cryogenic temperatures at stagnation pressures up to 8.8 atm. An overview of the cryogenic concept and discussions of drive power requirements, support systems, and operating characteristics and performance of the wind tunnel are included.

Kilgore, R. A.↗

Orbiter door closure tools

Safe reentry of the shuttle orbiter requires that the payload bay doors be closed and securely latched. Since a malfunction in the door drive or bulkhead latch systems could make safe reentry impossible, the requirement to provide tools to manually close and secure the doors was implemented. The tools would disconnect a disabled door or latch closure system and close and secure the doors if the normal system failed. The tools required to perform these tasks have evolved into a set that consists of a tubing cutter, a winch, a latching tool, and a bolt extractor. The design, fabrication, and performance tests of each tool are described.

Acres, W. R.↗

Design tradeoff studies and sensitivity analysis, appendix B

Further work was performed on the Near Term Hybrid Passenger Vehicle Development Program. Fuel economy on the order of 2 to 3 times that of a conventional vehicle, with a comparable life cycle cost, is possible. The two most significant factors in keeping the life cycle cost down are the retail price increment and the ratio of battery replacement cost to battery life. Both factors can be reduced by reducing the power rating of the electric drive portion of the system relative to the system power requirements. The type of battery most suitable for the hybrid, from the point of view of minimizing life cycle cost, is nickel-iron. The hybrid is much less sensitive than a conventional vehicle is, in terms of the reduction in total fuel consumption and resultant decreases in operating expense, to reductions in vehicle weight, tire rolling resistance, etc., and to propulsion system and drivetrain improvements designed to improve the brake specific fuel consumption of the engine under low road load conditions. It is concluded that modifications to package the propulsion system and battery pack can be easily accommodated within the confines of a modified carryover body such as the Ford Ltd.

Source record↗

Salton Sea solar pond project

The feasibility of constructing salt gradient solar ponds within the Salton Sea is being studied. These ponds would serve a dual purpose: (1) become a depository for unwanted salt and (2) supply thermal energy for driving turbine electric power systems. Under present circumstances, the rise in salinity is expected to eliminate fish life and create other unfavorable conditions. The proposed concept would have a power generation potential of 600 MWe.

French, R. L.↗

Thermal IR exitance model of a plant canopy

A thermal IR exitance model of a plant canopy based on a mathematical abstraction of three horizontal layers of vegetation was developed. Canopy geometry within each layer is quantitatively described by the foliage and branch orientation distributions and number density. Given this geometric information for each layer and the driving meteorological variables, a system of energy budget equations was determined and solved for average layer temperatures. These estimated layer temperatures, together with the angular distributions of radiating elements, were used to calculate the emitted thermal IR radiation as a function of view angle above the canopy. The model was applied to a lodgepole pine (Pinus contorta) canopy over a diurnal cycle. Simulated vs measured radiometric average temperatures of the midcanopy layer corresponded with 2 C. Simulation results suggested that canopy geometry can significantly influence the effective radiant temperature recorded at varying sensor view angles.

Kimes, D. S.↗

A 25-kW Series-Resonant Power Converter

Prototype exhibited efficiency of 93.9 percent. 25-kW resonant dc/dc power converter designed, developed, fabricated, and tested, using Westinghouse D7ST transistors as high-power switches. D7ST transistor characterized for use as switch in series-resonant converters, and refined base-drive circuit developed. Technical base includes advanced switching magnetic, and filter components, mathematical circuit models, control philosophies, and switch-drive strategies. Power-system benefits such as lower losses when used for high-voltage distribution, and reduced magnetics and filter mass realized.

Frye, R. J.↗

IPLIB (Image processing library) user's manual

IPLIB is a collection of HP FORTRAN 77 subroutines and functions that facilitate the use of a COMTAL image processing system driven by an HP-1000 computer. It is intended for programmers who want to use the HP 1000 to drive the COMTAL Vision One/20 system. It is assumed that the programmer knows HP 1000 FORTRAN 77 or at least one FORTRAN dialect. It is also assumed that the programmer has some familiarity with the COMTAL Vision One/20 system.

Faulcon, N. D.↗

Low-background direct readout array performance

The development and evaluation of an integrated array of antimony-doped silicon detectors is described. The spectral range of extrinsic silicon-integrated arrays useful for low-background IR astronomical applications is extended to about 31 microns with this development. The 58 x 62-element array is accessed by a direct readout multiplexer. The device is evaluated with a flexible microcomputer-based drive and readout electronics system in a low-background test dewar. Acceptance testing indicates single-pixel NEPs in the mid-10 to the -18th W/sq rt Hz range, and good global uniformity statistics.

Goebel, J. H.↗

Characterization of direct readout Si:Sb and Si:Ga infrared detector arrays for space-based astronomy

Preliminary test results from the evaluation of Si:Sb and Si:Ga 58 x 62-element infrared detector arrays are presented. These devices are being characterized under background conditions and readout rates representative of operation in orbiting, crogenically-cooled infrared observatories. The arrays are hybridized to silicon direct-readout multiplexers which allow random-access and nondestructive readout. Array performance optimization is being conducted with a flexible microcomputer-based drive and readoaut electronics system. Preliminary Si:Sb measurements indicate a sense node capacitance of 0.06 pF, peak (28-micron) responsivity above 3 A/W at 2V bias, read noise of 130 rms e(-), dark current approximately 10 e(-)/s, and a well capacity greater than 10 to the 5th e(-). The limited test data available on the performance of the Si:Ga array are also discussed.

Mckelvey, Mark E.↗

MHD aspects of magnetotail dynamics

The equations of ideal MHD represent the conservation of mass, momentum, and energy; thus, MHD must, in some broad sense, provide a correct description of large-scale structure of the earth's magnetosphere. However, steady-state, ideal MHD (the simplest description) allows only a static interaction between the solar wind and the magnetosphere. Hence an MHD theory of magnetospheric dynamics must involve unsteady flow turbulence, such as might be generated by Kelvin-Helmholtz turbulence at the magnetopause, and dissipative transport, such as reconnection, which violates ideal MHD. This brief review summarizes recent theoretical efforts to explore and extend the early MHD magnetospheric models of Axford and Petschek. Analytic calculations show that steady convection in the magnetotail is nearly impossible. Global magnetospheric simulations exhibit substorm reconnection phenomena for southward IMF and predict a novel convection pattern for northward IMF. Reconnection simulations show plasmoid formation and field-aligned current flows in the tail. The Kelvin-Helmholtz instability can provide a strong anomalous viscosity which can drive the viscous convection system.

Coroniti, F. V.↗

The DSS-14 C-band exciter

The development and implementation of a C-band exciter for use with the Block IV Receiver-Exciter Subsystem at Deep Space Station 14 (DSS-14) has been completed. The exciter supplements the standard capabilities of the Block IV system by providing a drive signal for the C-band transmitter while generating coherent translation frequencies for C-band (5-GHz) to S-band (2.2- to 2.3-GHz) Doppler extraction, C-band to L-band (1.6-GHz) zero delay measurements, and a level calibrated L-band test signal. Exciter functions are described, and a general explanation and description of the C-band uplink controller is presented.

Rowan, D. R.↗

Determination of joint drives for stable end-effector motion in flexible robotic systems

The prescribed tasks in high speed robotic systems are severely deteriorated because of their manipulator dynamic deflections. On the other hand conventional dynamic modeling techniques fail to reveal appropriate control forces in flexible systems. The conventional dynamic equations of motion for systems subject to kinematical constraints are modified by a new concept of control force representation. The directions of the control forces are selected such that they correspond to the joint degrees of freedom. Then the joint control forces and torques that yield unperturbed prescribed motions are solved simultaneously with the system motion. A flexible manipulator is presented to illustrate the methods proposed.

Ider, Sitki Kemal↗

X-ray illuminated stellar winds - Ionization effects in the radiative driving of stellar winds in massive X-ray binary systems

This paper presents calculations of the effect of changing X-ray ionization conditions on the radiative force experienced by the stellar wind material in a massive X-ray binary system. The radiative line force from the radiation field of the primary is parameterized in terms of the Castor et al. (1975) force multiplier. The results show that the line force decreases sharply, but in a nonlinear way, with increasing X-ray ionization. The dynamic consequences of this effect are discussed.

Stevens, Ian R.↗

Constraints on r-process nucleosynthesis in accretion disks

Systems in which accretion drives an outflow from a region near a compact object may enrich the interstellar medium in r-process elements. A detailed assessment of the efficacy of this mechanism for the r-process is presented here, taking into account the constraints imposed by typical accretion-disk conditions. It is concluded that r-process elements are unlikely to have been made in this way, largely because the total production is too low, by a factor of about 100,000, to explain the observed abundances.

Jin, Liping↗

Toward a global lunar resource survey - The Lunar Observer mission

The present status of NASA's Lunar Observer study effort at JPL is discussed in the context of an ongoing 20-year series of studies focused on defining a robotic, low-altitude, polar-orbiting mission to the moon. The primary emphasis of the discussion is a review of the various systems-level factors that drive the overall mission plan. Selected top-level project and science requirements are summarized and the current mission and science objectives are presented. A brief description of the candidate science instrument complement is included. Several significant orbital effects caused by the lunar gravity field are explained and the variety of trajectory and maneuver options considered for both getting to the moon and orbiting there are described. The baseline mission scenario that results is a single-spacecraft, single-launch scenario which includes a small subsatellite for lunar gravity field determination.

Ridenoure, Rex W.↗

Architecting a mission plan for Lunar Observer

The present status of NASA's Lunar Observer study effort at JPL is discussed in the context of an ongoing 20-year series of studies focused on defining a robotic, low-altitude, polar-orbiting mission to the moon. The primary emphasis of the discussion is a review of the various systems-level factors that drive the overall architecture of the mission plan. Selected top-level project and science requirements are summarized and the current mission and science objectives are presented. A brief description of the candidate science instrument complement is included. Several significant orbital effects caused by the lunar gravity field are explained and the variety of trajectory and maneuver options considered for both getting to the moon and orbiting there are described. Several candidate mission architectures are outlined and the mission plans chosen for future study are described. Two mission options result: a single-spacecraft, single-launch scenario, and a multiple-spacecraft, multiple-launch concept.

Ridenoure, Rex W.↗

Neutral temperature anomaly in the equatorial thermosphere - A source of vertical winds

Data obtained from the Wind and Temperature Spectrometer on the Dynamics Explorer during high solar activity show new evidence for the presence of vertical winds of a significant magnitude in the equatorial thermosphere. They reveal a latitudinal structure that can be related to the recently discovered equatorial temperature and wind anomaly (ETWA). In the local evening hours, the vertical winds usually are downward around the dip equator and collocated with the temperature minimum of ETWA. In general, they are upward at about 24 deg dip latitude away from the dip equator and are collocated with the ETWA temperature crests. The magnitude of the vertical winds is in the 10-40 m/s range. It is proposed that the temperature and pressure ridges, formed by the excess ion drag on the zonal winds around the two crests and ordered by the relatively lower ion drag at the trough of the well known equatorial ionization anomaly, drive a new wind system in the meridional plane and that the measured vertical winds form part of this wind system.

Raghavarao, R.↗

Aeroelastic response and stability of tiltrotors with elastically-coupled composite rotor blades

There is a potential for improving the performance and aeroelastic stability of tiltrotors through the use of elastically-coupled composite rotor blades. To study the characteristics of tiltrotors with these types of rotor blades it is necessary to formulate a new analysis which has the capabilities of modeling both a tiltrotor configuration and an anisotropic rotor blade. Background for these formulations is established in two preliminary investigations. In the first, the influence of several system design parameters on tiltrotor aeroelastic stability is examined for the high-speed axial flight mode using a newly-developed rigid-blade analysis with an elastic wing finite element model. The second preliminary investigation addresses the accuracy of using a one-dimensional beam analysis to predict frequencies of elastically-coupled highly-twisted rotor blades. Important aspects of the new aeroelastic formulations are the inclusion of a large steady pylon angle which controls tilt of the rotor system with respect to the airflow, the inclusion of elastic pitch-lag coupling terms related to rotor precone, the inclusion of hub-related degrees of freedom which enable modeling of a gimballed rotor system and engine drive-train dynamics, and additional elastic coupling terms which enable modeling of the anisotropic features for both the rotor blades and the tiltrotor wing. Accuracy of the new tiltrotor analysis is demonstrated by a comparison of the results produced for a baseline case with analytical and experimental results reported in the open literature. Two investigations of elastically tailored blades on a baseline tiltrotor are then conducted. One investigation shows that elastic bending-twist coupling of the rotor blade is a very effective means for increasing the flutter velocity of a tiltrotor, and the magnitude of coupling required does not have an adverse effect on performance or blade loads. The second investigation shows that passive blade twist control via elastic extension-twist coupling of the rotor blade has the capability of significantly improving tiltrotor aerodynamic performance. This concept, however, is shown to have, in general, a negative impact on stability characteristics.

Nixon, Mark W.↗

Refine your search to explore more results.