Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffusion model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Models and Measurements Quantify Photon Recycling, Charge-Carrier Diffusion and Photon Scattering Contributions to Photoluminescence in InP Nanowire Arrays

Nanowire arrays present many unique advantages for solar-to-chemical energy conversion. One possible advantage is that photon recycling between neighboring nanowires has the potential to increase solar energy conversion efficiencies. Here, in this work, we explore three underlying mechanisms of optical and electronic coupling between neighboring nanowires─incident photon scattering, photon recycling, and charge-carrier transport from the photoexcited nanowire to the neighboring nanowire via the underlying substrate─using single nanowire-level microscopy and spectroscopy measurements. We present a comprehensive analysis of light absorption and emission of a single nanowire at open circuit, and subsequent re-absorption and re-emission by a neighboring nanowire. We developed a novel correlated single nanowire microspectroscopy and widefield imaging methodology to spatially resolve photon communication pathways between neighboring nanowires and selectively image re-emitted and reflected photons. We developed unique multiphysics models to couple wave optics and semiconductor photophysics to especially isolate contributions from photon recycling and electronic transport to photon emission from neighboring nanowires. By systematically varying the morphologies of the nanowires modeled, we identified pathways to maximize photon recycling between neighboring nanowires. We concluded that the measured photoluminescence is more strongly influenced by the diffusion of charge carriers as compared to photon recycling in materials with moderate-to-large charge-carrier mobilities (>10 cm 2 V –1 s –1 ), and that photon recycling dictates photoluminescence intensity only when the charge-carrier mobility is low (<1 cm 2 V –1 s –1 ). The experimental and simulation platforms developed herein for photon management strategies can be leveraged by the semiconductor photocatalysis community to enhance solar-to-chemical conversion efficiencies in semiconductor nanowire arrays.

25 ENERGY STORAGE↗

Full event particle-level unfolding with variable-length latent variational diffusion

The measurements performed by particle physics experiments must account for the imperfect response of the detectors used to observe the interactions. One approach, unfolding, statistically adjusts the experimental data for detector effects. Recently, generative machine learning models have shown promise for performing unbinned unfolding in a high number of dimensions. However, all current generative approaches are limited to unfolding a fixed set of observables, making them unable to perform full-event unfolding in the variable dimensional environment of collider data. A novel modification to the variational latent diffusion model (VLD) approach to generative unfolding is presented, which allows for unfolding of high- and variable-dimensional feature spaces. The performance of this method is evaluated in the context of semi-leptonic t\bar{t} t t ‾ production at the Large Hadron Collider.

Shmakov, Alexander↗

The spiral wave instability induced by a giant planet. I. Particle stirring in the inner regions of protoplanetary disks

We have recently shown that spiral density waves propagating in accretion disks can undergo a parametric instability by resonantly coupling with and transferring energy into pairs of inertial waves (or inertial-gravity waves when buoyancy is important). In this paper, we perform inviscid three-dimensional global hydrodynamic simulations to examine the growth and consequence of this instability operating on the spiral waves driven by a Jupiter-mass planet in a protoplanetary disk. We find that the spiral waves are destabilized via the spiral wave instability (SWI), generating hydrodynamic turbulence and sustained radially alternating vertical flows that appear to be associated with long wavelength inertial modes. In the interval 0.3 R{sub p}⩽R⩽0.7R{sub p}, where R {sub p} denotes the semimajor axis of the planetary orbit (assumed to be 5 au), the estimated vertical diffusion rate associated with the turbulence is characterized by α{sub diff}∼ (0.2--1.2)×10{sup −2}. For the disk model considered here, the diffusion rate is such that particles with sizes up to several centimeters are vertically mixed within the first pressure scale height. This suggests that the instability of spiral waves launched by a giant planet can significantly disperse solid particles and trace chemical species from the midplane. In planet formation models where the continuous local production of chondrules/pebbles occurs over Myr timescales to provide a feedstock for pebble accretion onto these bodies, this stirring of solid particles may add a time constraint: planetary embryos and large asteroids have to form before a gas giant forms in the outer disk, otherwise the SWI will significantly decrease the chondrule/pebble accretion efficiency.

79 ASTRONOMY AND ASTROPHYSICS↗

Artificial neural network prediction of self-diffusion in pure compounds over multiple phase regimes

Artificial neural networks (ANNs) were developed to accurately predict the self-diffusion constants for pure components in liquid, gas and super critical phases. The ANNs were tested on an experimental database of 6625 self-diffusion constants for 118 different chemical compounds. The presence of multiple phases results in a heavy skew in the distribution of diffusion constants and multiple approaches were used to address this challenge. First, an ANN was developed with the raw diffusion values to assess what the main drawbacks of this direct method were. The first approach for improving the predictions involved taking the log 10 of diffusion to provide a more uniform distribution and reduce the range of target output values used to develop the ANN. The second approach involved developing individual ANNs for each phase using the raw diffusion values. Results show that the log transformation leads to a model with the best self-diffusion constant predictions and an overall average absolute deviation (AAD) of 6.56%. The resultant ANN is a generalized model that can be used to predict diffusion across all three phases and over a diverse group of compounds. The importance of each input feature was ranked using a feature addition method revealing that the density of the compound has the largest impact on the ANN prediction of self-diffusion constants in pure compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of theoretical and experimental heat diffusivities in the DIII-D edge plasma

Predictions of theoretical models for ion and electron heat diffusivity have been compared against experimentally inferred values of the heat diffusivity profile in the edge plasma of two H-modes and one L-mode discharge in DIII-D [J. Luxon, Nucl. Fusion 42, 614 (2002)]. Various widely used theoretical models based on neoclassical, ion temperature gradient modes, drift Alfven modes and radiative thermal instability modes for ion transport, and based on paleoclassical, electron temperature gradient modes, trapped electron modes, and drift resistive ballooning modes for electron transport were investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Role of filler and its heterostructure on moisture sorption mechanisms in polyimide films

Moisture sorption and diffusion exacerbate hygrothermal aging and can significantly alter the chemical and mechanical properties of polymeric-based components over time. In this study, we employ a multipronged multi-scale approach to model and understand moisture diffusion and sorption processes in polyimide polymers. A reactive transport model with triple-mode sorption (i.e., Henry’s, Langmuir, and pooling), experiments, and first principles atomistic computations were combined to synergistically explore representative systems of Kapton H and Kapton HN polymers. We find that the CaHPO 4 processing aid used in Kapton HN increases the total moisture uptake (~0.5 wt%) relative to Kapton H. Henry’s mode is found to play a major role in moisture uptake for both materials, accounting for >90% contribution to total uptake.However, the pooling mode uptake in Kapton HN was ~5 times higher than in Kapton H. First principles thermodynamics calculations based on density functional theory predict that water molecules chemisorb (with binding energy ~17–25 kcal/mol) on CaHPO 4 crystal surfaces. We identify significant anisotropy in surface binding affinity, suggesting a possible route to tune and mitigate moisture uptake in Kapton-based systems through controlled crystal growth favoring exposure of CaHPO 4 (101) surfaces during manufacturing.

36 MATERIALS SCIENCE↗

Diffuse {gamma} rays and p flux from dark matter annihilation: A model for consistent results with EGRET and cosmic ray data

In this work we develop a new propagation model for the Galactic cosmic rays based on the GALPROP code, including contributions from dark matter annihilation. Its predictions of the Galactic diffuse {gamma}-ray spectra are compatible with the EGRET data in all sky regions. It also gives consistent results about the diffuse {gamma} ray longitude and latitude distributions. The B/C, {sup 10}Be/{sup 9}Be, proton, electron and antiproton spectra are in agreement with cosmic ray measurements as well. In this model we have taken a universal proton spectrum throughout the Galaxy without introducing large fluctuation, considering the proton energy loss is negligible. The dark matter annihilation signals are boosted after taking the contributions from subhalos into account. Another interesting feature of this model is that it gives a better description of the diffuse {gamma} rays when taking the source distribution compatible with supernova remnants data, which is different from previous studies.

79 ASTRONOMY AND ASTROPHYSICS↗

Vacancy diffusion barrier spectrum and diffusion correlation in multicomponent alloys

Vacancy diffusion serves a crucial role in many important kinetic behaviors and properties of multicomponent alloys. Essential questions, however, persist regarding how chemical complexity affects diffusion and what unique characteristics, if any, set these alloys apart from traditional metals. Using neural network kinetics model, we study vacancy diffusion in NbMoTa alloy across a broad temperature range (2600 to 800 K). Unlike pure metals, the two key diffusion parameters—diffusion correlation factor f and activation energy ΔG m —are not constant in alloys, but instead substantially decrease with decreasing temperature. This temperature dependence arises from a reduced number of active vacancy jump pathways at lower temperatures, leading to more correlated diffusion. Upon examining vacancy diffusion throughout the entire compositional space of the Nb-Mo-Ta system, we discover that the slowest vacancy diffusion surprisingly occurs in the non-equimolar region, rather than the equimolar concentration where the configurational entropy is highest. The diffusion barrier spectrum, characterizing the diffusion energy landscape, is an intrinsic material characteristic, which controls both f and ΔG m and, thereby, the diffusivity. Lastly, we find that the vacancy diffusion rate drops noticeably in the presence of local chemical order in the NbMoTa system, particularly for MoTa alloys with long-range B2 order.

Defects↗

23.4% monolithic epitaxial GaAsP/Si tandem solar cells and quantification of losses from threading dislocations

A 2-terminal, dual-junction, epitaxially integrated, GaAsP/Si tandem solar cell with an 3rd party certified efficiency of 23.4 % was fabricated via MOCVD growth on an ex-situ produced Si sub cell. The drastic efficiency improvement over the authors previous peer-reviewed demonstration of such a device architecture is examined. Critical advancements in top cell design to maximize short wavelength response were critical in enabling improved top cell response. An in-depth analysis of this champion tandem cell has identified key loss mechanisms which elucidate the pathway for further efficiency gains. First, voltage dependent collection efficiency in the GaAsP top cell is the primary cause of fill factor losses currently limiting efficiency. Analysis of spectrally resolved I–V measurements and analytical device modeling and indicate poor diffusion length due to elevated dislocation densities as the likely cause for the voltage dependent collection efficiency. Second, modeling for the GaAs 0.75 P 0.25 top cell, using experimental data at multiple dislocation densities, provides quantitative understanding of the current and voltage losses associated with threading dislocations providing a clear efficiency pathway with reduction in dislocation density. Finally, Si subcell modeling identifies the pathway for further Si subcell advances over the present, simplistic design, which has yet to employ the known benefits of rear surface texture or dielectric passivation.

14 SOLAR ENERGY↗

State-variable model of porous electrode batteries 1-D electrochemical/thermal behavior

Compared to full-order numerical models, the state-variable model (SVM) achieves multiple orders of reduction in computation time for simulation of electrochemical/thermal transport and reaction processes occurring inside lithium-ion and similar batteries with porous electrode construction. The model efficiently describes Li diffusion dynamics in active material and electrolyte phases, charge transfer kinetics, charge balance, and electron transport processes. The model requires a separate pre-processing step to identify SVM parameters.

Kim, Gi-Heon↗

Hydrogen Uptake of DPB Getter Pellets

The physical and chemical properties of 1,4-diphenylbutadiyne (DPB) blended with carbon-supported Pd (DPB-Pd/C) in the form of pellets during hydrogenation were investigated. A thermogravimetric analyzer (TGA) was employed to measure the kinetics of the hydrogen uptake by the DPB getter pellets. The kinetics obtained were then used to develop a semi-empirical model, based on gas diffusion into solids, to predict the performance of the getter pellets under various conditions. The accuracy of the prediction model was established by comparing the prediction models with independent experimental data on hydrogen pressure buildup in sealed systems containing DPB getter pellets and subjected to known rates of hydrogen input. The volatility of the hydrogenated DPB products and its effects on the hydrogen uptake kinetics were also analyzed.

36 MATERIALS SCIENCE↗

Modeling Warm Dense Matter Experiments using the 3D ALE-AMR Code and the Move Toward Exascale Computing

The Neutralized Drift Compression Experiment II (NDCX II) is an induction accelerator planned for initial commissioning in 2012. The final design calls for a 3 MeV, Li+ ion beam, delivered in a bunch with characteristic pulse duration of 1 ns, and transverse dimension of order 1 mm. The NDCX II will be used in studies of material in the warm dense matter (WDM) regime, and ion beam/hydrodynamic coupling experiments relevant to heavy ion based inertial fusion energy. We discuss recent efforts to adapt the 3D ALE-AMR code to model WDM experiments on NDCX II. The code, which combines Arbitrary Lagrangian Eulerian (ALE) hydrodynamics with Adaptive Mesh Refinement (AMR), has physics models that include ion deposition, radiation hydrodynamics, thermal diffusion, anisotropic material strength with material time history, and advanced models for fragmentation. Experiments at NDCX-II will explore the process of bubble and droplet formation (two-phase expansion) of superheated metal solids using ion beams. Experiments at higher temperatures will explore equation of state and heavy ion fusion beam-to-target energy coupling efficiency. Ion beams allow precise control of local beam energy deposition providing uniform volumetric heating on a timescale shorter than that of hydrodynamic expansion. The ALE-AMR code does not have any export control restrictions and is currently running at the National Energy Research Scientific Computing Center (NERSC) at LBNL and has been shown to scale well to thousands of CPUs. New surface tension models that are being implemented and applied to WDM experiments. Some of the approaches use a diffuse interface surface tension model that is based on the advective Cahn-Hilliard equations, which allows for droplet breakup in divergent velocity fields without the need for imposed perturbations. Other methods require seeding or other methods for droplet breakup. We also briefly discuss the effects of the move to exascale computing and related computational changes on general modeling codes in fusion energy.

42 ENGINEERING↗

Irradiation-induced composition patterns in binary solid solutions

A theoretical/computational model for the irradiation-driven compositional instabilities in binary solid solutions has been developed. The model is suitable for investigating the behavior of structural alloys and metallic nuclear fuels in a reactor environment as well as the response of alloy thin films to ion beam irradiation. The model is based on a set of reaction-diffusion equations for the dynamics of vacancies, interstitials, and lattice atoms under irradiation. The dynamics of these species includes the stochastic generation of defects by collision cascades as well as the defect reactions and diffusion. The atomic fluxes in this model are derived based on the transitions of lattice defects. The set of reaction-diffusion equations are stiff, hence a stiffly stable method, also known as the Gear method, has been used to numerically approximate the equations. For the Cu-Au alloy in the solid solution regime, the model results demonstrate the formation of compositional patterns under high-temperature particle irradiation, with Fourier space properties (Fourier spectrum, average wavelength, and wavevector) depending on the cascade damage characteristics, average composition, and irradiation temperature.

36 MATERIALS SCIENCE↗

Hybrid numerical methods for multiscale simulations of subsurface biogeochemical processes

Many subsurface flow and transport problems of importance today involve coupled non-linear flow, transport, and reactions in media exhibiting complex heterogeneity. In particular, problems involving biological mediation of reactions fall into this class of problems. Recent experimental research has revealed important details about the physical, chemical, and biological mechanisms involved in these processes at a variety of scales ranging from molecular to laboratory scales. We are developing a hybrid multiscale modeling framework that combines discrete pore-scale models (which explicitly represent the geometry of grains and pores at a local scale) with continuum field-scale models (which conceptualize flow and transport in a porous medium without explicit pores and grains). At the pore scale, we have implemented a parallel three-dimensional Lagrangian model of flow and transport using the Smoothed Particle Hydrodynamics (SPH) method and performed test simulations using millions of computational particles on the supercomputer at the Environmental Molecular Sciences Laboratory (EMSL). We have also developed methods for gridding arbitrarily complex pore geometries and solution of pore-scale flow and transport using parallel implementations of grid-based computational fluid dynamics (CFD) methods. Within the multiscale hybrid framework, we have coupled pore- and continuum-scale models to simulate coupled diffusive mixing, reaction, and mineral precipitation, and compared the results with conventional continuum-only simulations. The hybrid multiscale modeling framework is being developed using a number of SciDAC enabling technologies including the Common Component Architecture (CCA), advanced solvers, grid technologies, scientific workflow tools, and visualization technologies.

Environmental Molecular Sciences Laboratory↗

Modelling disorder in 3,3' -dimethoxybensil, C[subscript 16]H[subscript 14]O[subscript 4]

This work is part of an extended study of benzil (C{sub 14}H{sub 10}O{sub 2}) and some of its derivatives which aims to understand the role of molecular flexibility in crystal packing and polymorphism. Significant steps have been made in modelling the structured thermal diffuse scattering from 3,3'-dimethoxybenzil, C{sub 16}H{sub 1}4O{sub 4}. It appears that the structure can be considered as a stack of layers of molecules in which interactions are strongest within the layers. The layers interact weakly along the a direction but more strongly along c, so shearing of the planes relative to each other is energetically likely. The molecule must be treated as flexible for a good model to be found.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

THE ROLE OF THE DIFFUSIVE PROTONS IN THE GAMMA-RAY EMISSION OF SUPERNOVA REMNANT RX J1713.7–3946—A TWO-ZONE MODEL

RX J1713.7−3946 is a prototype in the γ-ray-bright supernova remnants (SNRs) and is in continuing debates on its hadronic versus leptonic origin of the γ-ray emission. We explore the role played by the diffusive relativistic protons that escape from the SNR shock wave in the γ-ray emission, apart from the high-energy particles’ emission from the inside of the SNR. In the scenario that the SNR shock propagates in a clumpy molecular cavity, we consider that the γ-ray emission from the inside of the SNR may arise either from the inverse Compton scattering or from the interaction between the trapped energetic protons and the shocked clumps. The dominant origin between them depends on the electron-to-proton number ratio. The diffusive protons that escaped from the shock wave during the expansion history can provide an outer hadronic γ-ray component by bombarding the surrounding dense matter. The broadband spectrum can be well explained by this two-zone model, in which the γ-ray emission from the inside governs the TeV band, while the outer emission component substantially contributes to the GeV γ-rays. The two-zone model can also explain the TeV γ-ray radial brightness profile that significantly stretches beyond the nonthermal X-ray-emitting region. In the calculation, we present a simplified algorithm for Li and Chen's “accumulative diffusion” model for escaping protons and apply the Markov Chain Monte Carlo method to constrain the physical parameters.

79 ASTRONOMY AND ASTROPHYSICS↗

Towards high efficiency thin-film crystalline silicon solar cells: The roles of light trapping and non-radiative recombinations

Thin-film solar cells based on silicon have emerged as an alternative to standard thick wafers technology, but they are less efficient, because of incomplete absorption of sunlight, and non-radiative recombinations. In this paper, we focus on the case of crystalline silicon (c-Si) devices, and we present a full analytic electro-optical model for p-n junction solar cells with Lambertian light trapping. This model is validated against numerical solutions of the drift-diffusion equations. We use this model to investigate the interplay between light trapping, and bulk and surface recombination. Special attention is paid to surface recombination processes, which become more important in thinner devices. These effects are further amplified due to the textures required for light trapping, which lead to increased surface area. We show that c-Si solar cells with thickness of a few microns can overcome 20% efficiency and outperform bulk ones when light trapping is implemented. The optimal device thickness in presence of light trapping, bulk and surface recombination, is quantified to be in the range of 10–80 μm, depending on the bulk quality. These results hold, provided the effective surface recombination is kept below a critical level of the order of 100 cm/s. We discuss the possibility of meeting this requirement, in the context of state-of-the-art techniques for light trapping and surface passivation. We show that our predictions are within the capability of present day silicon technologies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Refine your search to explore more results.