Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Design Basis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Active cooling design for scramjet engines using optimization methods

A methodology for using optimization in designing metallic cooling jackets for scramjet engines is presented. The optimal design minimizes the required coolant flow rate subject to temperature, mechanical-stress, and thermal-fatigue-life constraints on the cooling-jacket panels, and Mach-number and pressure contraints on the coolant exiting the panel. The analytical basis for the methodology is presented, and results for the optimal design of panels are shown to demonstrate its utility.

Scotti, Stephen J.↗

Active cooling design for scramjet engines using optimization methods

A methodology for using optimization in designing metallic cooling jackets for scramjet engines is presented. The optimal design minimizes the required coolant flow rate subject to temperature, mechanical-stress, and thermal-fatigue-life constraints on the cooling-jacket panels, and Mach-number and pressure constraints on the coolant exiting the panel. The analytical basis for the methodology is presented, and results for the optimal design of panels are shown to demonstrate its utility.

Scotti, Stephen J.↗

Impact and mitigation of angular uncertainties in Bragg coherent x-ray diffraction imaging

Bragg coherent diffraction imaging (BCDI) is a powerful technique to explore the local strain state and morphology of microscale crystals. The method can potentially reach nanometer-scale spatial resolution thanks to the advances in synchrotron design that dramatically increase coherent flux. However, there are experimental bottlenecks that may limit the image reconstruction quality from future high signal-to-noise ratio measurements. In this work we show that angular uncertainty of the sample orientation with respect to a fixed incoming beam is one example of such a factor, and we present a method to mitigate the resulting artifacts. On the basis of an alternative formulation of the forward problem, we design a phase retrieval algorithm which enables the simultaneous reconstruction of the object and determination of the exact angular position corresponding to each diffraction pattern in the data set. We have tested the algorithm performance on simulated data for different degrees of angular uncertainty and signal-to-noise ratio.

36 MATERIALS SCIENCE↗

Exascale Co-Design Center for Materials in Extreme Environments (ExMatEx) Annual Report — Year 2

All activities of the Exascale Co-design Center for Materials in Extreme Environments (ExMatEx) are focused on the two ultimate goals of the project: (1) demonstrating and delivering a prototype scale-bridging materials science application based upon adaptive physics refinement, and (2) identifying the requirements for the exascale ecosystem that are necessary to perform computational materials science simulations (both single- and multi-scale). During the first year of ExMatEx, our focus was on establishing how we do computational materials science, by developing an initial suite of flexible proxy applications. These “proxy apps” are the primary vehicle for the co-design process, involving assessments and tradeoff evaluations both within the ExMatEx team, and with the entire exascale ecosystem. These interactions have formed the basis of our second year activities. The set of artifacts from these co-design interactions are the lessons learned, that are used to re-express the applications and algorithms within the context of emerging architectures, programming models, and runtime systems.

36 MATERIALS SCIENCE↗

Exascale Co-Design Center for Materials in Extreme Environments (ExMatEx) Annual Report - Year 2

All activities of the Exascale Co-design Center for Materials in Extreme Environments (Ex- MatEx) are focused on the two ultimate goals of the project: (1) demonstrating and delivering a prototype scale-bridging materials science application based upon adaptive physics refinement, and (2) identifying the requirements for the exascale ecosystem that are necessary to perform computational materials science simulations (both single- and multi-scale). During the first year of ExMatEx, our focus was on establishing how we do computational materials science, by developing an initial suite of flexible proxy applications. These “proxy apps” are the primary vehicle for the co-design process, involving assessments and tradeoff evaluations both within the ExMatEx team, and with the entire exascale ecosystem. These interactions have formed the basis of our second year activities. The set of artifacts from these co-design interactions are the lessons learned, that are used to re-express the applications and algorithms within the context of emerging architectures, programming models, and runtime systems.

36 MATERIALS SCIENCE↗

GeMini: A High-Resolution, Low-Resource, Gamma-Ray Spectrometer for Planetary Science Applications

GeMini is a high-resolution gamma-ray spectrometer designed for planetary-science exploration. GeMini serves as the basis for instruments being flown on three upcoming deep-space missions: NASA’s mission to the M-class asteroid (16) Psyche, the Japan Aerospace Exploration Agency sample-return mission to the moons of Mars, and NASA’s Dragonfly mission that will land on Saturn’s largest moon, Titan. These science missions require high-resolution spectroscopy in a low-power, low-mass, rugged design that can survive in a variety of environments. GeMini addresses these needs by providing a cryogenically cooled crystal of high-purity germanium that can operate with as little as 10 to 20 watts, depending on the implementation and mission, and has a mass of less than 2 kg. GeMini helps determine the elemental composition of planetary bodies by measuring gamma rays emitted from the surface. This paper describes the mechanical, thermal, and electrical design of GeMini as well as its performance. Further, it describes testing that was performed to validate the design with respect to launch loads and radiation damage. Although the basic design of GeMini is common to all three missions, each planetary body has unique environmental conditions and mission specifications. This paper concludes by describing these upcoming missions and how GeMini is customized for each.

79 ASTRONOMY AND ASTROPHYSICS↗

Synergistic double-atom catalysts of metal-boron anchored on g-C 2 N for electrochemical nitrogen reduction: Mechanistic insight and catalyst screening

The rational design of a novel catalytic center with a sound basis remains both challenging and rewarding for the electrochemical reduction of N 2 (eNRR), which has provided a feasible route for achieving clean and sustainable NH 3 production under ambient conditions. Herein, using density functional theory calculations, we demonstrate that hybrid metal (M)-boron (B) double-atom catalysts (DACs) embedded in g-C 2 N substrate (M-B@C 2 N, M = 3d, 4d and 5d transition metals) can achieve both high catalytic activity and high selectivity in eNRR. The proposed M-B@C 2 N DACs have exhibited impressive feasibility and stability thanks to the resilient and robust C 2 N substrate with abundant pyridinic N atoms distributed among right-sized pore structures. Our results reveal that like the metal center, the embedded B atom can actively involve in Ntriple bondN bond activation via π*-backdonation mechanism concomitant with the substantial charge transfer to adsorbed *N 2 , leading to sizable Nsingle bondN bond elongation. Accordingly, both adsorption energy and Nsingle bondN bond length of *N 2 can be employed as catalytic descriptors for predicting eNRR activity in terms of the limiting potentials (UL). Using high-throughput screening method, we found that six M-B@C 2 N candidates have stood out as the outstanding electrocatalysts for driving eNRR, namely, M = Ti (U L = 0 V), Mo (U L = 0 V), Nb (U L = -0.04 V), W (U L = -0.23 V), Zr (U L = -0.26 V), V (U L = -0.28 V). The underlying origin is attributed to the balanced and constrained N-affinity of M-B dual site working in synergy, which can thus be used as one important guide of catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Real-Time Optical Monitoring of Flow Kinetics and Gas Phase Reactions Under High-Pressure OMCVD Conditions

This contribution addresses the real-time optical characterization of gas flow and gas phase reactions as they play a crucial role for chemical vapor phase depositions utilizing elevated and high pressure chemical vapor deposition (HPCVD) conditions. The objectives of these experiments are to validate on the basis of results on real-time optical diagnostics process models simulation codes, and provide input parameter sets needed for analysis and control of chemical vapor deposition at elevated pressures. Access to microgravity is required to retain high pressure conditions of laminar flow, which is essential for successful acquisition and interpretation of the optical data. In this contribution, we describe the design and construction of the HPCVD system, which include access ports for various optical methods of real-time process monitoring and to analyze the initial stages of heteroepitaxy and steady-state growth in the different pressure ranges. To analyze the onset of turbulence, provisions are made for implementation of experimental methods for in-situ characterization of the nature of flow. This knowledge will be the basis for the design definition of experiments under microgravity, where gas flow conditions, gas phase and surface chemistry, might be analyzed by remote controlled real-time diagnostics tools, developed in this research project.

Dietz, N.↗

Design integration and noise studies for jet STOL aircraft. Task 7C: Augmentor wing cruise blowing valveless system. Volume 2: Small-scale development testing of augmentor wing critical ducting components

Augmentor wing ducting system studies conducted on a valveless system configuration that provides cruise thrust from the augmentor nozzles have shown that most of the duct system pressure loss would occur in the strut-wing duct y-junction and the wing duct-augmentor lobe nozzles. These components were selected for development testing over a range of duct Mach numbers and pressure ratios to provide a technical basis for predicting installed wing thrust loading and for evaluating design wing loading of a particular wing aspect ratios. The flow characteristics of ducting components with relatively high pressure loss coefficients were investigated. The turbulent pressure fluctuations associated with flows at high Mach numbers were analyzed to evaluate potential duct fatigue problems.

Runnels, J. N.↗

Analyses of the Boeing 737-MAX Accidents: Formal Models and Psychological Perspectives

Two fatal accidents involving the B737MAX resulted from the flight crews’ inability to overcome the effects of the Maneuvering Characteristics Augmentation System (MCAS). MCAS was designed to mimic the control column feel pressure and pitching behavior of the B737NG, which was the certification basis for the B737MAX. We briefly describe the potential role of formally modeling different perspectives during system design, and how such modeling can reveal gaps and conflicts between perspectives. We also discuss some of the relevant human factors issues involved in these accidents and how the aircraft’s behavior may have affected the pilots’ psychological states. Implications for automation design are considered.

5737MAX↗

Modeling and Simulation Tools for Heavy Lift Airships

For conventional fixed wing and rotary wing aircraft a variety of modeling and simulation tools have been developed to provide designers the means to thoroughly investigate proposed designs and operational concepts. However, lighter-than-air (LTA) airships, hybrid air vehicles, and aerostats have some important aspects that are different from heavier-than-air (HTA) vehicles. In order to account for these differences, modifications are required to the standard design tools to fully characterize the LTA vehicle design and performance parameters.. To address these LTA design and operational factors, LTA development organizations have created unique proprietary modeling tools, often at their own expense. An expansion of this limited LTA tool set could be accomplished by leveraging existing modeling and simulation capabilities available in the National laboratories and public research centers. Development of an expanded set of publicly available LTA modeling and simulation tools for LTA developers would mitigate the reliance on proprietary LTA design tools in use today. A set of well researched, open source, high fidelity LTA design modeling and simulation tools would advance LTA vehicle development and also provide the analytical basis for accurate LTA operational cost assessments. This paper will present the modeling and analysis tool capabilities required for LTA vehicle design, analysis of operations, and full life-cycle support. A survey of the tools currently available will be assessed to identify the gaps between their capabilities and the LTA industry's needs. Options for development of new modeling and analysis capabilities to supplement contemporary tools will also be presented.

airship design and analysis↗

Deploying Automation Technology Supporting Packaging and Transportation Operations

Various United States Department of Energy (DOE) sites are investigating the deployment of robotics to provide safer, effective, and more efficient operations. By implementing robotics in packaging and transportation operations, improvements toward production efficiency, worker ergonomics, radiological dose reduction, and security assurance can be realized. Robotic Systems must be designed and implemented in concert with a facility’s safety basis, classification, and security constraints, while improving overall operational effectiveness. The desired robotic implementation should provide a path to potential long-term cost savings, reduce/eliminate hazardous conditions and radiological exposure, while improving quality and reliability of an operation process. The Savannah River Site (SRS), a DOE Site located in Aiken South Carolina, has initiated several large scale projects supporting future nuclear material disposition activities. Incorporation of automation and robotic equipment in system designs will support effective and efficient material handling operations, including container movements and packaging activities. Robotic systems will execute tasks that are precise, procedural and integrated with control systems to verify and record data for material inventory and historical archiving. An overview of the current robotic system development to perform receipt inspection, packaging, storage and shipment preparation activities of designated Type A and B shipping packages will be presented.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Crystallographic analysis of NHERF1–PLCβ3 interaction provides structural basis for CXCR2 signaling in pancreatic cancer

Highlights: • CXCR2–NHERF1–PLCβ3 complex regulates CXCR2 signaling in pancreatic cancer. • The crystal structure of the NHERF1 PDZ1 domain in complex with PLCβ3. • The structure reveals specificity determinants of PDZ1–PLCβ3 interaction. • Endogenous PLCβ3 in pancreatic cancer cells interacts with both PDZ1 and PDZ2. • Structural basis of the PDZ1–PLCβ3 interaction is valuable in selective drug design. - Abstract: The formation of CXCR2–NHERF1–PLCβ3 macromolecular complex in pancreatic cancer cells regulates CXCR2 signaling activity and plays an important role in tumor proliferation and invasion. We previously have shown that disruption of the NHERF1-mediated CXCR2–PLCβ3 interaction abolishes the CXCR2 signaling cascade and inhibits pancreatic tumor growth in vitro and in vivo. Here we report the crystal structure of the NHERF1 PDZ1 domain in complex with the C-terminal PLCβ3 sequence. The structure reveals that the PDZ1–PLCβ3 binding specificity is achieved by numerous hydrogen bonds and hydrophobic contacts with the last four PLCβ3 residues contributing to specific interactions. We also show that PLCβ3 can bind both NHERF1 PDZ1 and PDZ2 in pancreatic cancer cells, consistent with the observation that the peptide binding pockets of these PDZ domains are highly structurally conserved. This study provides an understanding of the structural basis for the PDZ-mediated NHERF1–PLCβ3 interaction that could prove valuable in selective drug design against CXCR2-related cancers.

60 APPLIED LIFE SCIENCES↗

Irradiation test and post irradiation examination of the high burnup HTGR fuel - 18491

In order to examine irradiation performance of the new Tri-structural Isotropic (TRISO) fuel for the High Temperature Gas-cooled Reactor (HTGR) at the burnup around 100 GWd/t, a capsule irradiation test was conducted by WWR-K research reactor in the Institute of Nuclear Physics (INP) of Kazakhstan. The irradiated TRISO fuel was designed by Japan Atomic Energy Agency (JAEA) and fabricated in basis of the HTTR fuel technology in Japan. The fractional release of fission gas from the fuel during the irradiation shows good agreement with the predicted one released from as-fabricated failed TRISO fuel. It was suggested that unexpected additional fuel failure would not occur during the irradiation up to 100 GWd/t. In addition, the post-irradiation examination (PIE) with the irradiated fuel is planned to qualify TRISO fuel integrity and upgrade HTGR fuel design for further burnup extension. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermal-structural combined loads design criteria study

A study was conducted to determine methodology for combining thermal structural loads and assessing the effects of the combined loads on the design of a thermal protection system and a hot structure of a high cross range delta wing space shuttle orbiter vehicle. The study presents guidelines for establishing a basis for predicting thermal and pressure environments and for determining limit and ultimate design loads on the vehicle during reentry. Limit trajectories were determined by using dispersions on a representative nominal mission and system parameters expected during the life of the vehicle. Nine chosen locations on the vehicle surface having TPS or hot structures were examined, and weight sensitivity analyses were performed for each location.

Deriugin, V.↗

On repetitive flutter calculations in structural design

The use of continually updated natural modes, called changing modes, is discussed together with the employment of fixed modes in the design process. 'No-derivatives' methods are considered. The flutter solution process is separated into parts which are mode dependent and parts which are mode independent. On the basis of this separation an attempt is made to identify the type of design problems which are suitable for the use of changing modes, and the type of problems which are more suitable for fixed modes. The use of derivative methods is also examined.

Haftka, R. T.↗

Preliminary design studies of an advanced general aviation aircraft

The preliminary design results are presented of the advanced aircraft design project. The goal was to take a revolutionary look into the design of a general aviation aircraft. Phase 1 of the project included the preliminary design of two configurations, a pusher, and a tractor. Phase 2 included the selection of only one configuration for further study. The pusher configuration was selected on the basis of performance characteristics, cabin noise, natural laminar flow, and system layouts. The design was then iterated to achieve higher levels of performance.

Barrett, Ron↗

A Tension Shell Structure for Application to Entry Vehicles

The shape of a shell of revolution designed t o have only tensile stresses under axisymmetric aerodynamic loadings has been derived on the basis of linear membrane theory. values of circumferential tension is also given. The results of this paper indicate that the design of an entry vehicle based on the tension shell concept leads to desirable aerodynamic and structural characteristics, namely, high drag and low weight.

Anderson, Melvin S.↗

Refine your search to explore more results.