Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Correlation coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Stress corrosion cracking of a titanium alloy in chloride-containing liquid environments

Ti-8 Al-1 Mo-1 V was tested in solvents containing chloride, bromide or iodide ions. It was found that the region II plateau velocity could be correlated with the inverse of the viscosity for several solvents. It seems most likely that this reflects the influence of the viscosity on the diffusion coefficient of some species involved in a mass transfer process which limits the crack growth. Associated tests were performed in which the potential, pH and concentration of Cl- were varied, in some of the same solutions as used for the viscosity tests. It is concluded from these tests that the absence of cathodic protection against cracking in solutions of low pH arises from an ohmic effect which isolates the crack tip from external potential control.

Smyrl, W. H.↗
NASA NTRS1977

Correlation of part-span damper losses through transonic rotors operating near design point

The design-point losses caused by part-span dampers (PSD) were correlated for 21 transonic axial flow fan rotors that had tip speeds varying from 350 to 488 meters per second and design pressure ratios of 1.5 to 2.0. For these rotors a correlation using mean inlet Mach number at the damper location, along with relevant geometric and aerodynamic loading parameters, predicts the variation of total pressure loss coefficient in the region of the damper to a good approximation.

Roberts, W. B.↗
NASA NTRS1993

Navier-Stokes analysis of turbine flowfield and external heat transfer

An explicit 2D Navier-Stokes code has been modified and used to analyze the aerodynamics and heat transfer of a transonic turbine cascade. This code is based on a four-stage Runge-Kutta scheme. An algebraic Reynolds stress model (ARSM) and two versions of low Reynolds number (LRN) two-equation turbulence models, Chien's (1982) LRN k-epsilon model and Coakley's (1983) LRN q-omega model, have been employed in the computations. The surface pressure distributions and wake profiles are predicted well by all the models. The k-epsilon model and the k-epsilon/ARSM model yield better predictions of heat transfer than the q-omega model. The k-epsilon/ARSM solutions show some significant, though not dramatic, differences in the predicted skin friction coefficients, heat transfer rates, and performance parameters, as compared to the k-epsilon model. The predicted semiwake width is consistent with the measurement and correlation.

Luo, J.↗
NASA NTRS2005

Managing Lunar and Mars Mission Radiation Risks: Cancer Risks, Uncertainties, and Shielding Effectiveness - Part 1

This document addresses calculations of probability distribution functions (PDFs) representing uncertainties in projecting fatal cancer risk from galactic cosmic rays (GCR) and solar particle events (SPEs). PDFs are used to test the effectiveness of potential radiation shielding approaches. Monte-Carlo techniques are used to propagate uncertainties in risk coefficients determined from epidemiology data, dose and dose-rate reduction factors, quality factors, and physics models of radiation environments. Competing mortality risks and functional correlations in radiation quality factor uncertainties are treated in the calculations. The cancer risk uncertainty is about four-fold for lunar and Mars mission risk projections. For short-stay lunar missins (<180 d), SPEs present the most significant risk, but one effectively mitigated by shielding. For long-duration (>180 d) lunar or Mars missions, GCR risks may exceed radiation risk limits. While shielding materials are marginally effective in reducing GCR cancer risks because of the penetrating nature of GCR and secondary radiation produced in tissue by relativisitc particles, polyethylene or carbon composite shielding cannot be shown to significantly reduce risk compared to aluminum shielding. Therefore, improving our knowledge of space radiobiology to narrow uncertainties that lead to wide PDFs is the best approach to ensure radiation protection goals are met for space exploration.

Cucinotta, Francis A.↗
NASA NTRS2009

Version 2 of the Protuberance Correlations for the Shuttle-Orbiter Boundary Layer Transition Tool

Orbiter-specific transition data, acquired in four ground-based facilities (LaRC 20-Inch Mach 6 Air Tunnel, LaRC 31-Inch Mach 10 Air Tunnel, LaRC 20-Inch Mach 6 CF4 Tunnel, and CUBRC LENS-I Shock Tunnel) with three wind tunnel model scales (0.75, 0.90, and 1.8%) and from Orbiter historical flight data, have been analyzed to improve a pre-existing engineering tool for reentry transition prediction on the windward side of the Orbiter. Boundary layer transition (BLT) engineering correlations for transition induced by isolated protuberances are presented using a laminar Navier-Stokes (N-S) database to provide the relevant boundary-layer properties. It is demonstrated that the earlier version of the BLT correlation that had been developed using parameters derived from an engineering boundary-layer code has improved data collapse when developed with the N-S database. Of the new correlations examined, the proposed correlation 5, based on boundary-layer edge and wall properties, was found to provide the best overall correlation metrics when the entire database is employed. The second independent correlation (proposed correlation 7) selected is based on properties within the boundary layer at the protuberance height. The Aeroheating Panel selected a process to derive the recommended coefficients for Version 2 of the BLT Tool. The assumptions and limitations of the recommended protuberance BLT Tool V.2 are presented.

King, Rudolph A.↗
NASA NTRS2022

Computing Sensitivities in Evolutionary Systems: A Real-time Reduced Order Modeling Strategy

We present a new methodology for computing sensitivities in evolutionary systems using a model-driven low-rank approximation. To this end, we formulate a variational principle that seeks to minimize the distance between the time derivative of the reduced approximation and sensitivity dynamics. The first order optimality condition of the variational principle leads to a system of closed form evolution equations for an orthonormal basis and corresponding sensitivity coefficients. This approach allows for the computation of sensitivities with respect to a large number of parameters in an accurate and tractable manner by extracting correlations between different sensitivities on the fly. The presented method requires solving forward evolution equations, sidestepping the restrictions imposed by the forward/backward workflow of adjoint sensitivities. For example, the presented method, unlike the adjoint equation, does not impose any input/output load and can be used in applications in which real-time sensitivities are of interest. We demonstrate the utility of the method for three test cases: (1) computing sensitivity with respect to model parameters in the Rössler system, (2) computing sensitivity with respect to an infinite-dimensional forcing parameter in the chaotic Kuramoto--Sivashinsky equation, and (3) computing sensitivity with respect to reaction parameters for species transport in a turbulent reacting flow.

Reduced order model↗
NASA NTRS2022

Desert Locust Cropland Damage Differentiated from Drought, with Multi-Source Remote Sensing in Ethiopia

In 2020, Ethiopia had the worst desert locust outbreak in 25 years, leading to food insecurity. Locust research has typically focused on predicting the paths and breeding grounds based on ground surveys and remote sensing of outbreak factors. In this study, we hypothesized that it is possible to detect desert locust cropland damage through the analysis of fine-scale (5–10 m) resolution satellite remote sensing datasets. We performed our analysis on 121 swarm point locations on croplands derived from the Food and Agriculture Organization (FAO) of the United Nations, and 94 ‘non-affected’ random cropland sample points generated for this study that are distributed within 20–25 km from the ‘center’ of swarm affected sample locations. Integrated Drought Condition Indices (IDCIs) and Vegetation Health Indices (VHIs) calculated for the affected sample locations for 2000–2020 were strongly correlated (R(exp 2) > 0.90) with that of the corresponding non-affected group of sample sites. Drought indices were strongly correlated with the evaluation Standardized Precipitation Evapotranspiration Indices (SPEIs) and showed that 2020 was the wettest year since 2000. In 2020, the NDVI and backscatter coefficient of cropland phenologies from the affected versus non-affected cropland sample sites showed a slightly wider, but significant gap in March (short growing season) and August-October (long growing season). Thus, slightly wider gaps in cropland phenologies between the affected and non-affected sites were likely induced from the locust damage, not drought, with fine scale data representing a larger gap.

Desert locust↗
NASA NTRS1973

In-flight and laboratory vacuum-friction test results

Coefficient of friction measurements were made for six unlubricated metal couples exposed to the space environment aboard the OV-1-13 spacecraft and exposed to laboratory vacuum. Materials studied included mutually soluble, partially soluble, and insoluble metal combinations. Two samples of each material couple were tested in space and in the laboratory using the disk and rider technique. Linear velocity was 0.10 cm/s (2.5 in/min) and rider normal load was 4.45 N (1 lb) for the gold versus silver couples and 8.90 N (2lb) for the other combinations. Results showed that friction data obtained in a clean ion-pumped laboratory vacuum of 10 to the minus 10 power materials with low mutual solubility can be correlated to operation in the vicinity of a typical scientific spacecraft that is exposed to an ambient pressure as low as 10 to the minus 12 power torr. The expected increase in coefficient of friction with solubility was shown. Material couples with high mutual solubility present the hazard of unpredictable drastic friction increase in orbit which may not be evident in laboratory testing at levels down to 10 to the minus 10 power torr. It was also shown that gross cold welding of unlubricated metals exposed to a satellite environment does not occur.

Devine, E. J.↗
NASA NTRS1990

Flow boiling with enhancement devices for cold plate coolant channel design

The use of flow boiling for thermal energy transport is intended to provide an alternative for accommodating higher heat fluxes in commercial space systems. The objectives are to: (1) examine the variations in both the mean and local (axial and circumferential) heat transfer coefficients for a circular coolant channel with either smooth walls, spiral fins, or both spiral fins and a twisted tape; (2) examine the effects of channel diameter and subcooling; and (3) develop an improved reduction analysis and/or suggest possible heat transfer correlation of the present data. Freon-11 is the working fluid. Two-dimensional (circumferential and axial) wall temperature distributions were measured for coolant channels with the above noted internal geometries. The flow regimes which are being studied are: (1) single phase; (2) subcooled flow boiling; and (3) stratified flow boiling. The inside diameter of all test sections is near 1.0 cm. Cicumferentially averaged heat transfer coefficients at several axial locations were obtained for selected coolant channels for a mass velocity of 210 kg/sq m s, an exit pressure of 0.19 MPa (absolute), and an inlet subcooling of 20.8 C. Overall (averaged over the entire channel) heat transfer coefficients were compared for the above channel geometries. This comparison showed that the channel with large pitch spiral fins had higher heat transfer coefficients at all power levels.

Boyd, Ronald D., Sr.↗
NASA NTRS1986

Influence of dynamic inflow on the helicopter vertical response

A study was conducted to investigate the effects of dynamic inflow on rotor-blade flapping and vertical motion of the helicopter in hover. Linearized versions of two dynamic inflow models, one developed by Carpenter and Fridovich and the other by Pitt and Peters, were incorporated in simplified rotor-body models and were compared for variations in thrust coefficient and the blade Lock number. In addition, a comparison was made between the results of the linear analysis, and the transient and frequency responses measured in flight on the CH-47B variable-stability helicopter. Results indicate that the correlations are good, considering the simplified model used. The linear analysis also shows that dynamic inflow plays a key role in destabilizing the flapping mode. The destabilized flapping mode, along with the inflow mode that the dynamic inflow introduces, results in a large initial overshoot in the vertical acceleration response to an abrupt input in the collective pitch. This overshoot becomes more pronounced as either the thrust coefficient or the blade Lock number is reduced. Compared with Carpenter's inflow model, Pitt's model tends to produce more oscillatory responses because of the less stable flapping mode predicted by it.

Chen, Robert T. N.↗
NASA NTRS1987

Influence of dynamic inflow on the helicopter vertical response

A study has been conducted to investigate the effects of dynamic inflow on rotor-blade flapping and vertical motion of the helicopter in hover. Linearized versions of two dynamic inflow models, one developed by Carpenter and Fridovich and the other by Pitt and Peters, were incorporated in simplified rotor-body models and were compared for variations in thrust coefficient and the blade Lock number. In addition, a comparison was made between the results of the linear analysis, and the transient and frequency responses measured in flight on the CH-47B variable-stability helicopter. Results indicate that the correlations are good, considering the simplified model used. The linear analysis also shows that dynamic inflow plays a key role in destabilizing the flapping mode. The destabilized flapping mode, along with the inflow mode that the dynamic inflow introduces, results in a large initial overshoot in the vertical acceleration response to an abrupt input in the collective pitch. This overshoot becomes more pronounced as either the thrust coefficient or the blade Lock number is reduced. Compared with Carpenter's inflow model, Pitt's model tends to produce more oscillatory responses because of the less stable flapping mode predicted by it.

Chen, Robert T. N.↗
DOE OSTI2020

Probing local electrochemistry via mechanical cyclic voltammetry curves

Understanding the mechanical response of an electrode during electrochemical cycling and its correlation to the device electrochemical performance is crucial to improving the performance of insertion-type energy storage devices, electrochemical actuators, water purification, ion separation and neuromorphic computing applications. Here, we visualized the electro-chemo-mechanical coupling behaviors during charge storage of anhydrous and hydrated WO 3 electrodes via in situ atomic force microscopy (AFM) and developed the concept of mechanical cyclic voltammetry (mCV) curves. The relationship between electrochemical current and strain was investigated with simplified models and the results revealed that the proton insertion/deinsertion process could be described through potential-dependent electro-chemo-mechanical coupling coefficients which might indicate changes in insertion processes during electrode cycling. The mCV mapping results highlight the local heterogeneity and show that the charging processes varied across the electrode. These local variations could be further correlated to local morphology, crystal orientations or chemical compositions with proper electrode designs.

36 MATERIALS SCIENCE↗
DOE OSTI2026

China's Contribution to Arctic Black Carbon Declined From 2009 to 2022

Black carbon (BC) aerosol is an important driver of Arctic warming, and China used to be a major contributor to the Arctic BC burden through long-range atmospheric transport. Here we show that China's contribution declined significantly from 2009 to 2022, primarily due to reductions in domestic BC emissions following the implementation of clean air policies. Global chemistry-transport model simulations indicate a relative decline of ∼3% yr −1 ( p < 0.05) in China's Arctic BC contribution, exceeding the decrease rate in the underlying emission inventory. Sensitivity simulations further suggest that climate change-induced shifts in atmospheric transport may have amplified this decline. Observations of aerosol absorption coefficients (σ ap ) at Arctic background observatories revealed steeper declines in σ ap when modeled China-to-total BC ratios were higher. Moreover, σ ap correlated positively with modeled BC from China, with stronger relationships as the modeled China-to-total BC ratios increased. Together, these results provide robust evidence that China's emission reductions have diminished its role in Arctic BC, contributing an estimated 0.02 W m −2 decrease in the direct radiative effect during the Arctic haze season.

GEOS-chem model↗
DOE OSTI2020

Shockwave Arrival Times from Operation Redwing and Operation Upshot-Knothole

Back in the 1940s, 50s, and 60s, 210 nuclear tests were conducted in the atmosphere. As part of the testing program, EG&G performed shockwave arrival-time measurements for different shots in different operations using pressure transducers at different distances from ground zero. They then developed correlations unique to each set of data. They did not attempt to correlate all data onto one curve. As a fireball moves, material is picked up and pulled in, which is called entrainment. This extra material increases the mass of the fireball, and as the energy is spread out over a larger and larger mass, the specific internal energy of the fireball gases drops, which causes the temperature to drop as well. When the energy in the solid angle of a spherical shockwave hits the surface, it is reflected. Shortly thereafter, it catches up with the outward-moving shockwave and re-combines with it, causing it to expand at a slightly faster rate. As the shockwave grows, it approaches a hemispherical shape. The purpose of this project is to demonstrate that the shockwave arrival-time data can, in fact, be correlated onto a single function when the shockwave time-dependent solution is modified to include a geometric factor, θ, and is corrected for an entrainment coefficient.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2023

Collective Energy Transport of Excitons in Two-dimensional Materials

Electronic thermal transport and thermoelectric measurements are pursued in this project to obtain unique insights into the unusual collective energy transport behaviors in two-dimensional (2D) heterostructures. Electronic thermal transport and thermoelectric measurements are essential techniques for characterizing bulk superconductors by probing the heat-carrying quasi-particles. Thermoelectric and electronic thermal transport measurements are expanded in this work beyond bulk systems to probe interactions among electrons, holes, and phonons in 2D heterostructures. In one experiment, a microbridge platform is advanced to demonstrate field-effect resistive-thermometry measurements of the electronic thermal conductivity of graphene heterostructures. Together with first principles theoretical calculations and analytical models, the experimental results suggest that tunable electron coupling with flexural phonons provides a knob to control quantum matters in graphene heterostructures with broken reflection symmetry. In another experiment, the Seebeck coefficient (S) is measured to probe interlayer interactions in electron-hole bilayers that are predicted to give rise to the emergence of a variety of correlated states. As a measure of the entropy, the measured S reveals the signature of electric injection of interlayer excitons in transition metal dichalcogenide (TMD) structures.

36 MATERIALS SCIENCE↗
NASA NTRS1976

A nonlinear theory for airfoils with trailing-edge jet flap

A nonlinear procedure for computing the pressure distribution on an airfoil with a trailing edge jet flap is described. The method is not restricted to thin airfoils or shallow jet-deflection angles. Correlation with experiment indicates that the characteristics of the pressure distribution are predicted by the theory, but the effect of entrainment is overpredicted with the entrainment coefficient used.

Barger, R. L.↗
NASA NTRS1978

Differences in radar return from ice-covered North Slope Lakes

Comparisons are made between L and X band synthetic aperture radar images of frozen lakes on the North Slope of Alaska and ground truth observations of the nature of their ice covers. It is shown that the differences in radar backscatter observed on different areas of a lake can be correlated with whether or not the lake is frozen completely to the bottom at the site in question. This explanation is reasonable inasmuch as the reflection coefficient associated with the high-dielectric contrast ice/water interface is significantly higher than that associated with a low-contrast ice/soil interface. However, the presence of the ice/water interface cannot be the only condition required for the higher backscatter because the ice/water interface per se would be specular at X and L band frequencies, causing the energy returned from the interface to be reflected away from the radar receiver. The other principal factor contributing to the return of energy from the ice/water interface to the receiver is believed to be the presence in the ice of numerous vertically elongated air bubbles which would act as scatters.

Weeks, W. F.↗
NASA NTRS1982

A frost formation model and its validation under various experimental conditions

A numerical model that was used to calculate the frost properties for all regimes of frost growth is described. In the first regime of frost growth, the initial frost density and thickness was modeled from the theories of crystal growth. The 'frost point' temperature was modeled as a linear interpolation between the dew point temperature and the fog point temperature, based upon the nucleating capability of the particular condensing surfaces. For a second regime of frost growth, the diffusion model was adopted with the following enhancements: the generalized correlation of the water frost thermal conductivity was applied to practically all water frost layers being careful to ensure that the calculated heat and mass transfer coefficients agreed with experimental measurements of the same coefficients.

Dietenberger, M. A.↗

Refine your search to explore more results.