Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Anode material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100

Abernathy's Lap

A lap in this instance is not a midriff but a tool for presision.polishing and grinding. During the Saturn V moonbooster program, Marshall Space Flight Center found a need for a better lap. The need arose from the exquisitely precise tolerances required for parts of the launch vehicle's guidance,and control system. So William J. Abernathy, a former Marshall employee, built a better lap; he invented a method for charging aluminum lap plates with diamond powder, then hard-anodizing them. The resulting lap produces a high polish on materials ranging from the softest aluminum to the hardest ceramics. It operates faster, wears longer and requires less reworking. Abernathy got NASA's permission to obtain a personal patent and he formed the one-man Abernathy Laps Co. in Huntsville, which produces a variety of laps. One of Abernathy's customers is Bell Aerospace Textron, Buffalo, which uses the laps to finish polish delicate instrument parts produced for NASA's Viking and other space programs. Says a Bell official: "Time needed (with the Abernathy lap) is a fraction of that required by conventional methods. The result is extremely accurate flatness and surface finish." Abernathy is providing laps for other manufacturing applications and for preparation of metallurgical specimens. The business is small but steady, and Abernathy plans expansion into other markets.

Source record↗

Battery Particle Simulation

Two simulations show the differences between a battery being drained at a slower rate, over a full hour, versus a faster rate, only six minutes (a tenth of an hour). In both cases battery particles go from being fully charged (green) to fully drained (red), but there are significant differences in the patterns of discharge based on the rate.

25 ENERGY STORAGE↗

Organic electroluminescent devices

An organic light emitting device is disclosed in which the emissive dopant material in its organic emissive layer is an organic phosphorescent emissive material and a neat film of the organic phosphorescent emissive material is disposed between the organic emissive layer and the anode as an electron blocking layer.

Forrest, Stephen R.↗

Solid electrolyte technology with rearrangeable bonds for metal and metal-ion batteries

In an embodiment, a metal or metal-ion battery cell, includes anode and cathode electrodes, a separator electrically separating the anode and the cathode, and a solid electrolyte ionically coupling the anode and the cathode, wherein the solid electrolyte comprises a material having one or more rearrangeable chalcogen-metal-hydrogen groups that are configured to transport at least one metal-ion or metal-ion mixture through the solid electrolyte, wherein the solid electrolyte exhibits a melting point below about 350° C. In an example, the solid electrolyte may be produced by mixing different dry metal-ion compositions together, arranging the mixture inside of a mold, and heating the mixture while arranged inside of the mold at least to a melting point (e.g., below about 350° C.) of the mixture so as to produce a material comprising one or more rearrangeable chalcogen-metal-hydrogen groups.

Yushin, Gleb↗

Understanding LIB Battery Electrodes Through Classical Electrochemical Interface Theory

Classical models of the electrochemical interface can be applied to complex and dynamic electrodes to understand important mechanisms that are relevant to device-level phenomena like calendar aging or cycle life. Here, we show that negative alloy electrodes with wide electrochemical windows cannot be assumed to have static interfaces throughout all states of charge. Under high states of charge, the interface -including the solid electrolyte interphase - has characteristics that resemble a highly polarized electrode far from the point of zero charge. Under these conditions, the interface can be understood through the Helmholtz model. At lower states of charge, the interface capacitance decreases and the space charge layer length increases. This transformation resembles a metal electrode approaching the point of zero charge which is understood through the Gouy-Chapman-Stern-Grahame model of the electrochemical interface. This transformation happens at both silicon and carbon-coated silicon interfaces. From voltage-limited cycling experiments, in the limit of the diffuse double layer, the silicon electrode impedance rises significantly in the first few cycles. This rise is related to the continuous electrochemical reduction of electrolyte components from an interface that is not electronically screened from the electrolyte. In other words, an electrode interface for batteries should resemble a 'Helmholtz-like' structure.

anode↗

Structure and Properties of Nanostructured YBa{sub 2}Cu{sub 3}O{sub 7–δ}, BiFeO{sub 3}, and Fe{sub 3}O{sub 4}

The development of new nanostructured materials based on YBa{sub 2}Cu{sub 3}O{sub 7–δ}, BiFeO{sub 3}, and Fe{sub 3}O{sub 4} compounds is considered. The structure, morphology, and properties of these materials are studied. The possibilities of fabricating YBa{sub 2}Cu{sub 3}O{sub 7–δ} ceramics with given densities from nanopowders in a single stage by an energy efficient method and growing superconducting films of the same composition on a silicon substrate (on a SiO{sub 2} layer) are demonstrated. The technique for fabricating BiFeO{sub 3} nanopowder, making it possible to obtain nanostructured ceramics without additional accompanied phases commonly forming during BiFeO{sub 3} synthesis is developed. Two methods of the single-stage synthesis of Fe{sub 3}O{sub 4} nanopowder are presented: burning of nitrate-organic precursors and the electrochemical three-electrode method in which one of the electrodes, i.e., an anode containing scrap iron and slurry, is used as an expendable material.

36 MATERIALS SCIENCE↗

Composite Thermal Switch

Lithium primary and lithium ion secondary batteries provide high specific energy and energy density. The use of these batteries also helps to reduce launch weight. Both primary and secondary cells can be packaged as high-rate cells, which can present a threat to crew and equipment in the event of external or internal short circuits. Overheating of the cell interior from high current flows induced by short circuits can result in exothermic reactions in lithium primary cells and fully charged lithium ion secondary cells. Venting of the cell case, ejection of cell components, and fire have been reported in both types of cells, resulting from abuse, cell imperfections, or faulty electronic control design. A switch has been developed that consists of a thin layer of composite material made from nanoscale particles of nickel and Teflon that conducts electrons at room temperature and switches to an insulator at an elevated temperature, thus interrupting current flow to prevent thermal runaway caused by internal short circuits. The material is placed within the cell, as a thin layer incorporated within the anode and/or the cathode, to control excess currents from metal-to-metal or metal-to-carbon shorts that might result from cell crush or a manufacturing defect. The safety of high-rate cells is thus improved, preventing serious injury to personnel and sensitive equipment located near the battery. The use of recently available nanoscale particles of nickel and Teflon permits an improved, homogeneous material with the potential to be fine-tuned to a unique switch temperature, sufficiently below the onset of a catastrophic chemical reaction. The smaller particles also permit the formation of a thinner control film layer (<50 m), which can be incorporated into commercial high-rate lithium primary and secondary cells. The innovation permits incorporation in current lithium and lithium-ion cell designs with a minimal impact on cell weight and volume. The composite thermal switch (CTS(TradeMark)) coating can be incorporated in either the anode or cathode or both. The coating can be applied in a variety of different processes that permits incorporation in the cell and electrode manufacturing processes. The CTS responds quickly and halts current flow in the hottest parts of the cell first. The coating can be applied to metal foil and supplied as a cell component onto which the active electrode materials are coated.

McDonald, Robert↗

Interweaving 3D Network Binder for High-Areal-Capacity Si Anode through Combined Hard and Soft Polymers

We report that Si anodes suffer an inherent volume expansion problem. The consensus is that hydrogen bonds in these anodes are preferentially constructed between the binder and Si powder for enhanced adhesion and thus can improve cycling performance. There has been little research done in the field of understanding the contribution of the binder's mechanical properties to performance. Herein, a simple but effective strategy is proposed, combining hard/soft polymer systems, to exploit a robust binder with a 3D interpenetrating binding network (3D-IBN) via an in situ polymerization. The 3D-IBN structure is constructed by interweaving a hard poly(furfuryl alcohol) as the skeleton with a soft polyvinyl alcohol (PVA) as the filler, buffering the dramatic volume change of the Si anode. The resulting Si anode delivers an areal capacity of >10 mAh cm -2 and enables an energy density of >300 Wh kg -1 in a full lithium-ion battery (LIB) cell. The component of the interweaving binder can be switched to other polymers, such as replacing PVA by thermoplastic polyurethane and styrene butadiene styrene. Such a strategy is also effective for other high-capacity electroactive materials, e.g., Fe 2 O 3 and Sn. In conclusion, this finding offers an alternative approach in designing high-areal-capacity electrodes through combined hard and soft polymer binders for high-energy-density LIBs.

36 MATERIALS SCIENCE↗

Measurement of anode surface temperature in carbon nanomaterial production by arc discharge method

Highlights: • We measured the temperature of anode surface by two-color pyrometry combined with a high speed camera successfully. • Growth temperature of pyrolytic graphite, MWNTs, and nano-graphite particles were in ranges of 2400–2600 K, 2600–2700 K, and 2700–3500 K, respectively. • High temperature contributes to form thermodynamically unstable material. - Abstract: Nano-graphite particles, multi-wall carbon nanotube (MWNT), and pyrolytic graphite were prepared at different positions of the anode surface in an arc discharge. Graphite electrodes were employed for the arc discharge under helium environment at atmospheric pressure. Nano-sized carbon products were characterized by scanning electron microscopy and transmission electron microscopy. During the arc discharge, two-color pyrometry combined with a high-speed camera was conducted to measure the temperature distribution of the anode surface. The growth temperature of pyrolytic graphite, MWNT, and nano-graphite particles were in the ranges of 2400–2600 K, 2600–2700 K, and 2700–3500 K, respectively. The local temperature of anode surface is a critical parameter to determine the products with different morphologies. The formation mechanism of these carbon nanomaterials is suggested based on the local temperature of anode surface and their thermodynamic stability.

36 MATERIALS SCIENCE↗

Investigating the Doping Mechanism of Pyrene Based Methacrylate Functional Conductive Binder in Silicon Anodes for Lithium-Ion Batteries

The doping mechanism of poly (1-pyrenemethyl methacrylate) (PPy) is investigated through electrochemical analytical and spectroscopic method. The performance of PPy as a Si materials binder is studied and compared with that of a commercial available lithium polyacrylate (PAALi) binder. The pyrene moiety consumes lithium ions according to the cyclic voltammogram (CV) measurement, as a doping to the PPy binder. Based on the lithium consumption, PPy based Si/graphite electrode doping is quantified at 1.1 electron/pyrene moiety. Lastly, the PPy binder based electrodes surface are uniform and crack free during lithiation/delithiation, which is revealed through Scanning electron microscope (SEM) imaging.

25 ENERGY STORAGE↗

X-ray Pinhole Camera Measurements

The rod pinch diode is made up of a cathode plate and a small diameter anode rod that extends through the cathode hole. The anode is charged positively. The rod tip is made of a high-z material which is chosen for its bremsstrahlung efficiency. When the diode is pulsed it produces an intense x-ray source used for pulsed radiography. The baseline or reference diode consists of a 0.75 mm diameter Tungsten (W) tapered anode rod which extends 10 mm through a 9 mm diameter 3 mm thick aluminum (Al) aperture. The majority of the current in the electron beam is created on the edges of the cathode aperture and when properly configured, the electrons will self insulate, travel down the extension of the rod, and pinch onto the tip of the rod. In this presentation, performance of hybrid diodes will be compared with the baseline diode.

x-ray, pinhole, camera, measurements↗

Pyromellitic diimide based bipolar molecule for total organic symmetric redox flow battery

Non-aqueous redox flow batteries based on total organic electrolytes, consisting of earth-abundant elements, i.e., C, H, N, O, are regarded as a promising technology for sustainable and large-scale energy storage. In particular, bipolar redox-active organic materials (BROMs) are distinctly fascinating as electroactive species because they have multiple oxidation states and can undergo multiple redox processes. By virtue of this unique characteristic, BROMs can be utilized as both anolyte and catholyte in symmetric flow batteries, consequently, helping alleviate cross-contamination issues. Here, in this paper, we report an all-organic symmetric redox flow battery based on diimide molecule as a bipolar electroactive material. The potential interval between the cathodic peak and the inner and outer anodic peaks led to a promising cell voltage of 2.22 V. The symmetric battery can be operated at a current density of 20 mA cm -2 , with a coulombic efficiency of 90% for over 100 cycles. This work proposes an alternative approach to designing multi-electron organic redox active materials to facilitate the advancement of high-density symmetric flow batteries.

25 ENERGY STORAGE↗

Hierarchical NiCo{sub 2}O{sub 4} nanowalls composed of ultrathin nanosheets as electrode materials for supercapacitor and Li ion battery applications

Highlights: • NiCo{sub 2}O{sub 4} nanowalls composed of ultrathin nanosheets are synthesized by solvothermal reaction. • The prepared NiCo{sub 2}O{sub 4} structures possess excellent electrochemical properies. • The hierarchica electrode materials might potential applications for energy storage devices. - Abstract: In this work, NiCo{sub 2}O{sub 4} nanowalls composed of ultrathin nanosheets are fabricated successfully on Ni foam by a facile one-pot solvothermal method followed by thermolysis of the precursors. The as-prepared NiCo{sub 2}O{sub 4} products are evaluated as electrode materials for supercapacitors and lithium ion batteries. The results show high discharge capacitance of 925 mF/cm{sup 2} at a current density of 5 mA/cm{sup 2}, with remarkable cycling stability (about 24.2% loss after 6000 cycles) and excellent rate performance (71.5% capacitance retention with current density range from 1 mA/cm{sup 2} to 20 mA/cm{sup 2}). In addition, Ni foam supported NiCo{sub 2}O{sub 4} nanowalls possess excellent discharge capacity of 1100 mAh/g as lithium ion battery anode at a current density of 100 mA/g. The excellent electrochemical performance of NiCo{sub 2}O{sub 4} nanowalls could be ascribed to the unique spatial structure composed of interconnected ultrathin nanosheets, which facilitates ion penetration and electron transportation, demonstrating their potential applications as electrode materials for high performance supercapacitors and lithium ion batteries.

36 MATERIALS SCIENCE↗

Catalyst surfaces for the chromous/chromic redox couple

An electricity producing cell of the reduction-oxidation (REDOX) type divided into two compartments by a membrane is disclosed. A ferrous/ferric couple in a chloride solution serves as a cathode fluid to produce a positive electric potential. A chromic/chromous couple in a chloride solution serves as an anode fluid to produce a negative potential. The electrode is an electrically conductive, inert material plated with copper, silver or gold. A thin layer of lead plates onto the copper, silver or gold layer when the cell is being charged, the lead ions being available from lead chloride which has been added to the anode fluid. If the REDOX cell is then discharged, the lead deplates from the negative electrode and the metal coating on the electrode acts as a catalyst to increase current density.

Giner, J. D.↗

Effect of Concentration, Temperature, and Interelectrode Gap on the Voltage Drop in an Electrochemical System of GdCl{sub 3}-LiCl-KCl

One of the most common conversations for those in the nuclear field and the public when discussing nuclear power is the issue of nuclear waste. When used nuclear fuel (UNF) is removed from a reactor, it contains fission products, some of which are long lived isotopes that will continue to irradiate for hundreds of years. One of several solutions to this issue is reprocessing, a process where minor actinides and other fission products are separated from still fissile and fertile materials. In the United States, there is no reprocessing of UNF at an industrial scale; however, one of the methods that universities and national labs are currently researching is known as pyro-processing. Pyro-processing utilizes electrochemistry in a molten salt environment to treat UNF and remove uranium and plutonium. The heart of the pyro-processing system is an electrorefining process, where most of the U in the UNF is selectively collected on a solid cathode in molten lithium-potassium chloride (LiCl-KCl) at high temperatures (723 K - 773 K). To model the behavior of materials in the electro-refiner, small bench-scale electrochemical experiments are being performed at many research universities and national labs to better understand material behavior. Within the electrochemical cell, there is a small resistance to current between the cathode and anode. This results in a voltage drop, which can affect the results of the experiments. This voltage drop varies based upon concentration of the salt, the temperature, the distance between the anode and cathode, and the scan rate. For this study, cyclic voltammetry will be performed on GdCl{sub 3}-LiCl-KCl at various temperatures (723 K - 798 K), various sample concentrations (1, 5, and 10 wt%), various scan rates (50, 100, 200, and 300 mV/s), and two different electrode spacing configurations. The resulting cyclic voltammograms will be compared for both electrode configurations to see the impact of interelectrode gap on the voltage drop.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Reactive Fe anode for electrolytic reduction of solid metal oxide in molten LiCl-Li 2 O

Iron metal was investigated for use as a consumable anode for electrolytic reduction of solid metal oxides in molten LiCl-Li 2 O (2.0 - 2.4 wt%). Tests were performed where the potential of Fe anodes was increased incrementally from 0.1 to 1.0 V (vs Ni/NiO). Oxide formation on the anode started at a potential of 0.4 V and was identified as FeO via X-ray diffraction. In the absence of a pre-formed oxide layer, severe attack of the anode started at a potential of 0.7 V and was accompanied by an increase in Fe concentration in the salt. When an oxide layer was allowed to form on the anode, the Fe concentration did not increase in the salt. O 2 was detected in the headspace gas at an anode potential of 1.0 V only when an oxide layer was present on the anode. Finally, the results of this study support the idea that an inexpensive sacrificial anode could be an ideal replacement for expensive Pt that is currently widely used for this process.

36 MATERIALS SCIENCE↗

Anodizing Effect on the Wear and Corrosion Behavior of EN AC-46500 Components Produced by Semi-Solid Rheocasting (SSR)

In this work the effect of the anodizing process on the surface properties of SSR components was investigated. EN AC-46500 aluminium alloy components were formed using a 700 Ton high pressure machine and an Idra Semi Solid Rheocasting Station (SSR). The samples were heat treated with the aim of modifying the form and distribution of the eutectic silicon phase and after the heat treatment they were shotpeened in different conditions to obtain different surface roughness. Finally, the components were anodized with the purpose of improving the tribological properties and corrosion resistance. Surface modifications were investigated as they might have beneficial effects on the wear and corrosion behaviour.Experiments using a tribometer (ball on disc configuration) were performed in order to evaluate the tribological properties of the material and salt spray corrosion tests were used to study the corrosion resistance. These studies were carried out before and after the anodizing process. The anodized components show a significant improvement of the corrosion and wear resistance under the tested conditions, in spite of the high percentage of intermetallics compounds present in the AC-46500 alloy.

36 MATERIALS SCIENCE↗

Refine your search to explore more results.