Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “visible light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) Aeroshell Performance

On November 10, 2022, NASA launched the Low-earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) vehicle as a secondary payload mounted inside the launch vehicle adaptor on an Atlas V 401 out of the Vandenburg Space Force Base (VSFB). The primary payload, Joint Polar Satellite System-2 (JPSS-2), was delivered successfully to a sun synchronous trajectory shortly after launch, at which point the Centaur upper stage performed a burn to de-orbit the system. Once on the desired trajectory to enter the atmosphere the top of the payload adaptor was ejected to expose the LOFTID vehicle, then the LOFTID aeroshell, a Hypersonic Inflatable Aerodynamic Decelerator (HIAD), was deployed and inflated without issue. The Centaur pointed the LOFTID to the desired attitude to enter the atmosphere, spun the assembly to three rpm, separated the reentry vehicle, and finally performed a collision avoidance maneuver to prevent the Centaur from re-contacting the LOFTID after atmospheric entry. The LOFTID vehicle maintained the design attitude and spin rate from separation to atmospheric entry, roughly 30 minutes, demonstrating the aeroshell did not experience any energy damping from inflatable structure flexibility. The LOFTID vehicle entered the atmosphere over Alaska at >8km/sec and decelerated as designed demonstrating stable flight from hypersonic entry through subsonic parachute deployment. On-board visible light cameras captured the reactions of the heatshield through all phases of flight, and co-located infrared light cameras captured the temperature distribution of the aft side of the heat shield anchored to a distribution of thermocouples on the inflatable structure (IS) in the field of view. Thermocouples were also embedded in the forward side of the aeroshell both in the Flexible Thermal Protection System (FTPS) as well as the IS. This paper will discuss aeroshell response to the atmospheric entry. The visible light cameras captured mechanical response of the deployable aeroshell to the loads applied in the different phases of entry. Events seen on the visible light cameras correlate with the response of the load cell pins on webbing elements that attach the aeroshell to the centerbody structure. Thermocouple data captured verifies the aerothermal response of the aeroshell was in-kind with pre-flight analysis predictions although somewhat lower in most locations. This data will allow the improvement of the aeroshell modeling tools predictive capability. Post-flight inspection of the aeroshell after splash down and ocean recovery shows that all the aeroshell materials and manufacturing techniques developed over the past 15 years of HIAD technology development performed as designed at large scale, a scale which cannot be replicated in ground test facilities. The HIAD supported the LOFTID vehicle high in the water after touching down under parachute and maintained buoyancy and integrity for the hour it took to position the recovery vessel near the LOFTID after splash down. There was no indication the HIAD would have experienced an issue maintaining buoyancy for many more hours after water impact as the component maintained adequate inflation pressure more than 24 hours after water extraction with no additional inflation gas in tanks, as the inflation gas remaining in the tank was vented prior to impact.

Entry Descent Landing Atmospheric Entry Deployable↗
DOE OSTI2020

Direct Evidence of Visible Light-Induced Homolysis in Chlorobis(2,9-dimethyl-1,10-phenanthroline)copper(II)

Developments in the field of photoredox catalysis that leveraged the long-lived excited states of Ir(III) and Ru(II) photosensitizers to enable radical coupling processes paved the way for explorations of synthetic transformations that would otherwise remain unrealized. While first row transition metal photocatalysts have not been as extensively investigated, valuable synthetic transformations covering broad scopes of olefin functionalization have been recently reported featuring photoactivated chlorobis(phenanthroline) Cu(II) complexes. In this study, the photochemical processes underpinning the catalytic activity of [Cu(dmp) 2 Cl]Cl (dmp = 2,9-dimethyl-1,10-phenanthroline) were studied. The combined results from static spectroscopic measurements and conventional photochemistry, ultrafast transient absorption, and electron paramagnetic resonance spin trapping experiments strongly support blue light (λ ex = 427 or 470 nm)-induced Cu–Cl homolytic bond cleavage in [Cu(dmp) 2 Cl] + occurring in <100 fs. On the basis of electronic structure calculations, this bond-breaking photochemistry corresponds to the Cl → Cu(II) ligand-to-metal charge transfer transition, unmasking a Cu(I) species [Cu(dmp) 2 ] + and a Cl atom, thereby serving as a departure point for both Cu(I)- or Cu(II)-based photoredox transformations. No net photochemistry was observed through direct excitation of the ligand-field transitions in the red (λ ex = 785 or 800 nm), and all combined experiments indicated no evidence of Cu–Cl bond cleavage under these conditions. As a result, the underlying visible light-induced homolysis of a metal–ligand bond yielding a one-electron-reduced photosensitizer and a radical species may form the basis for novel transformations initiated by photoinduced homolysis featuring in situ-formed metal–substrate adducts utilizing first row transition metal complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Molecular Modifications of Crystalline Poly(triazine imide) for Advancing Its Structure–Property Relationships in Light-Driven Catalysis

Carbon-nitride materials represent light-absorbing structures composed of earth-abundant elements capable of being leveraged for semiconductor photocatalysis at their surfaces. This study systematically investigates the addition of molecular modifiers to the synthesis of crystalline carbon nitrides to assess their effects on the materials’ structure, optical bandgap, and photocatalytic activity for hydrogen (H 2 ) and oxygen (O 2 ) evolution under ultraviolet and visible-light irradiation. Melamine and five pyrimidine-centered analogs were employed as building blocks to modify various heteroatoms within the polymeric framework. The modified materials were characterized with attention to the differences introduced by the monomeric modifiers and their influence on the resulting structures and compositions. The findings indicate that these changes significantly broaden the visible-light absorption range, albeit with the gradual loss of the bulk crystalline structure. As the loading of modifiers increased beyond 50%, a predominantly amorphous form of carbon nitride emerged. XPS, 13 C solid-state NMR, and SEM analyses corroborated the changes, which were attributed to modifications of the elemental composition and a reduced amount of Li cations and charge-balancing Cl anions owing to fewer binding sites in the intralayer cavities. In photocatalytic measurements under an ultraviolet 390 nm LED, and aided by photodeposited nanoparticle cocatalysts, the unmodified PTI-LiCl framework demonstrated the highest H 2 evolution rate (HER; 3.44 mmol·g –1 ·h –1 ) with an apparent quantum yield of 5.4%, along with total water splitting at rates of 163 μmol of H 2 ·g –1 ·h –1 and 75.6 μmol·O 2 g –1 ·h –1 . While PTI-LiCl showed trace activity under a visible-light 440 nm LED, all modified materials exhibited enhanced reactivity with as low as 5% molecular modifiers. The photocatalytic rates peaked at a 15% modification level when using 2,4,6-triaminopyrimidine, with rates of 33 μmol·g –1 ·h –1 for HER, along with 19.7 μmol of H 2 ·g –1 ·h –1 and 8.7 μmol of O 2 ·g –1 ·h –1 for total water splitting. Density functional theory calculations were used to probe electronic structure changes resulting from the modifications. Furthermore, these results elucidate the structural, optical, and electronic changes arising from the five selected molecular modifiers and their impact on the semiconductors’ photocatalytic properties.

Electrical conductivity↗
NASA NTRS1985

Three-dimensional and tomographic imaging device for X-ray and gamma-ray emitting objects

An instrument for obtaining quantitative, three-dimensional and tomographic information relating to X-ray and gamma-ray emitting objects and for the orthoscopic viewing of such objects includes a multiple-pinhole aperture plate held spaced from an X-ray or gamma-ray to visible-light converter which is coupled to a visible-light image intensifier. The spacing between the aperture plate and the converter is chosen such that the mini-images of an emitting object formed by the pinholes do not substantially overlap as they impinge on the converter. The output of the image intensifier is digitized by a digitizing camera in terms of position and intensity and fed into a digital computer. The computer may output quantitative information relating to the emitting object directly, such as that relating to tomograms, or provide information in analogue form when coupled with a suitable viewing device to give an orthoscopic, three-dimensional image of the object.

Yin, L. I.↗
DOE OSTI2022

Molecular Evolution of Far-Red Light-Acclimated Photosystem II

Cyanobacteria are major contributors to global carbon fixation and primarily use visible light (400−700 nm) to drive oxygenic photosynthesis. When shifted into environments where visible light is attenuated, a small, but highly diverse and widespread number of cyanobacteria can express modified pigments and paralogous versions of photosystem subunits and phycobiliproteins that confer far-red light (FRL) absorbance (700−800 nm), a process termed far-red light photoacclimation, or FaRLiP. During FaRLiP, alternate photosystem II (PSII) subunits enable the complex to bind chlorophylls d and f, which absorb at lower energy than chlorophyll a but still support water oxidation. How the FaRLiP response arose remains poorly studied. Here, we report ancestral sequence reconstruction and structure-based molecular evolutionary studies of the FRL-specific subunits of FRL-PSII. We show that the duplications leading to the origin of two PsbA (D1) paralogs required to make chlorophyll f and to bind chlorophyll d in water-splitting FRL-PSII are likely the first to have occurred prior to the diversification of extant cyanobacteria. These duplications were followed by those leading to alternative PsbC (CP43) and PsbD (D2) subunits, occurring early during the diversification of cyanobacteria, and culminating with those leading to PsbB (CP47) and PsbH paralogs coincident with the radiation of the major groups. We show that the origin of FRL-PSII required the accumulation of a relatively small number of amino acid changes and that the ancestral FRL-PSII likely contained a chlorophyll d molecule in the electron transfer chain, two chlorophyll f molecules in the antenna subunits at equivalent positions, and three chlorophyll a molecules whose site energies were altered. The results suggest a minimal model for engineering far-red light absorbance into plant PSII for biotechnological applications.

ancestral sequence reconstruction↗
NASA NTRS2015

Relative Water Content, Bidirectional Reflectance and Bidirectional Transmittance of the Interior of Detached Leaves During Dry Down.

Remotely sensing the water status of plants and the water content of canopies remain long-term goals of remote sensing research [1]. Estimates of canopy water content commonly involve measurements in the 900nm to 2000nm portion of the optical spectrum [1]. We have used optical polarization techniques to remove leaf surface reflection and to demonstrate that the visible light reflected by the interior of green healthy corn leaves measured in situ inversely depends upon the leaf relative water content (RWC) [2]. In the research reported here, we again used optical polarization techniques in order to remove the leaf surface reflection from our measurements. This allowed us to monitor the interiors of detached corn leaf samples during leaf dry down measuring for each sample the RWC, bidirectional spectral reflectance and bidirectional spectral transmittance over the wavelength range 450nm to 2,500nm. Our new results like our earlier results show light scattered by the leaf interior measured in the visible wavelength region generally increased as leaf RWC decreased. However, the spectral character and the much improved signal noise of our new results shows the RWC-linked visible light scattering changes are due to leaf structural changes. Our new results show that scattering changes that occur with changing leaf RWC are not attributable to molecular configuration changes in cellular pigments.

Corn↗
NASA NTRS2015

Simulation and Measurement of Stray Light in the CLASP

We are planning an international rocket experiment Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) is (2015 planned) that Lyman Alpha line polarization spectroscopic observations from the sun. The purpose of this experiment, detected with high accuracy of the linear polarization of the Ly􀉲 lines to 0.1% by using a Hanle effect is to measure the magnetic field of the chromosphere-transition layer directly. For total flux of the sun visible light overwhelmingly larger and about 200 000 times the Ly􀉲 line wavelength region, also hinder to 0.1% of the polarization photometric accuracy achieved in the stray light of slight visible light. Therefore we were first carried out using the illumination design analysis software called stray light simulation CLASP Light Tools. Feature of this simulation, using optical design file (ZEMAX format) and structural design file (STEP format), to reproduce realistic CLASP as possible to calculate machine is that it was stray study. And, at the stage in the actual equipment that made the provisional set of CLASP, actually put sunlight into CLASP using coelostat of National Astronomical Observatory of Japan, was subjected to measurement of stray light (San test). Pattern was not observed in the simulation is observed in the stray light measurement results need arise that measures. However, thanks to the stray light measurement and simulation was performed by adding, it was found this pattern is due to the diffracted light at the slit. Currently, the simulation results is where you have taken steps to reference. In this presentation, we report the stray light simulation and stray light measurement results that we have implemented

CLASP↗
NASA NTRS2010

NASA's STEREO Mission

NASA's Solar-TErrestrial Relations Observatory mission, launched in 2006 October, consists of two nearly identical spacecraft in heliocentric orbits and currently 1380 of heliolongitude apart. Instrumentation on both spacecraft monitor solar wind plasma and magnetic field parameters, energetic particles, radio flux, and provide EUV and visible-light imaging of the corona, as well as novel, visible-light images of the ecliptic heliosphere. In addition to higher-resolution telemetry that enables a broad range of research into the propagation of disturbances in the inner heliosphere, a low-bandwidth, space weather beacon telemetry stream provides near-realtime information on each of these measurement types.

Gurman, Joseph B.↗
DOE OSTI2025

Driving Electron Transfer in Photosystem I Using Far-Red Light: Overall Perspectives

Photosystem I (PSI) is a photosynthetic protein–pigment complex that, upon photoexcitation, transfers electrons to ferredoxin, facilitating the production of NADPH. Isolated PSI reaction centers (RCs) have also been used in hybrid systems to reduce protons and produce ‘biohydrogen’. This review article examines how various cyanobacteria with similar photosynthetic machinery utilize different wavelengths of light to execute photosynthetic electron transport through PSI. Key factors, such as, the structure of the electron transfer cofactors, the protein environment surrounding the primary donor pigments and hydrogen-bonding interactions with the surrounding protein matrix are analyzed to understand their roles in maintaining efficient electron transfer when it is driven using photons of different energies. We compare PSI complexes with known atomic structures from four species of cyanobacteria, Thermosynechococcus elongatus, Acaryochloris marina, Halomicronema hongdechloris, and Fischerella thermalis. T. elongatus is typical of most oxygenic photosynthetic organisms in that it requires visible light and uses only chlorophyll a (Chl a ) in PSI. In contrast, H. hongdechloris and F. thermalis are photoacclimating species capable of producing Chl f and Chl d that use red light when little visible light is available. A. marina , on the other hand, is adapted to red light conditions and consistently utilizes Chl d as its primary photosynthetic pigment, maintaining a stable pigment composition. Here, we explore the structural and functional differences between the PSI RCs of these organisms and the impact of these differences on electron transport. The structural differences in the cofactors influence both the absorption wavelengths of the cofactors and the energy levels of the intermediate states of electron transfer. An analysis of the surrounding protein shows how it has been adapted and underscores the interplay between the pigment structure, protein environment, and hydrogen bonding networks in tuning the efficiency and adaptability of photosynthetic mechanisms across different species of cyanobacteria.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Metallic and porous Ti nanorod arrays for visible-IR light absorption and dendrite-free stable lithium-metal batteries

It is still a challenging task to prepare highly porous nanorod arrays of metals formed on substrates for optical and energy storage applications. Herein, we demonstrate the design and synthesis of black color, metallic and highly porous Ti nanorod arrays as novel current collectors for dendrite-free and highly stable Li-metal anodes. The high porosity of metallic nanorod arrays provides numerous heterogeneous nucleation sites and huge contact area and large space for the accommodation of Li metal. The conductive metallic Ti nanorod arrays enhance electrode integration. Effectively, it eliminates formation Li dendrites and demonstrates superior cycling stability over 300 cycles. Additionally, the unique porous structures of the nanorod arrays can decrease the amplitude of forced vibration in narrow space leading to light absorption. Interestingly, the metal is black instead of metallic color. The black metallic nanorod arrays can absorb more than 96% of both visible and infra-red lights. Furthermore, this black color metallic porous nanorod arrays may find additional applications in aerospace, energy, biomedical, defence, and chemical industries.

25 ENERGY STORAGE↗
DOE OSTI2025

Wavelength-Selective Reactivity of Iron(III) Halide Salts in Photocatalytic C–H Functionalization

The utility of halogen radicals in hydrocarbon functionalization extends from early examples of photochemical halogenation to recent reports using photoredox catalysis with iridium complexes and simple transition metal salts such as FeCl 3 . The majority of these methods (uncatalyzed and iron-catalyzed) require UV light (λ ≤ 390 nm), and systematic efforts to enable the use of visible light remain valuable. We report the use of a simple Fe(III) salt that enables a C–H to C–C and C–N functionalization under visible light. The reactivity and selectivity profile using different light sources demonstrates wavelength-selective behavior, which was further investigated with deuterium kinetic isotope effect experiments and DFT calculations. These results show that control over the reactive intermediates in this iron-catalyzed reaction can be achieved through proper choice of the wavelength of irradiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1975

Infrared upconversion as a means of seeing in the dark

A new approach to seeing in the dark is described which is based on the principles of nonlinear optics employing a crystal such as lithium iodate. A nonlinear optical device capable of producing photons at higher frequencies from lower-frequency incident light is shown to upconvert infrared light directly into visible light. The major advantages of the infrared upconversion process is that it permits the infrared signal to be detected by photon-counting devices presently available for the visible spectral region, and that it can provide sensitivity to infrared radiation without the need for cryogenic cooling of the detector used. Early works on infrared upconversion are reviewed. The development of applications is discussed as to astronomical spectroscopy and infrared image upconversion involving either angular or positional resolution elements. The demonstration of infrared upconversion in rectangular waveguides of single-crystal GaAs by Anderson et al. (1971) indicates future possibilities in upconversion by the use of integrated optics devices.

Gurski, T. R.↗
DOE OSTI2021

Photonic Bandgap in Achiral Liquid Crystals—A Twist on a Twist

Abstract Achiral mesogenic molecules are shown to be able to spontaneously assemble into liquid crystalline smectic phases having either simple or double‐helical structures. At the transition between these phases, the double‐helical structure unwinds. As a consequence, in some temperature range, the pitch of the helix becomes comparable to the wavelength of visible light and the selective reflection of light in the visible range is observed. The photonic bandgap phenomenon is reported for achiral liquid crystals.

36 MATERIALS SCIENCE↗
NASA NTRS1981

Real-time observation of X-ray diffraction patterns with the Lixiscope

The feasibility of the Lixiscope (Low Intensity X-ray Imaging Scope) is demonstrated for real-time observation of transmission Laue patterns. Making use of the high-gain capability of microchannel plate (MCP) visible-light image intensifier tubes, X-ray images are converted to visible-light images by a scintillator. Pb discs are taped to the center of the Lixiscope input face, and crystal samples are held on a goniometer stage with modeling clay. With a compact size to facilitate off axis viewing, and real-time viewing to allow instantaneous response, the Lixiscope may prove useful in dynamic studies of the effects of plastic flows, stresses, high pressures, and low temperatures.

Chung, D. Y.↗
DOE OSTI2022

Handheld multi-sensor biometric imaging device and processing pipeline

A handheld biometric imaging device having an array of cameras configured to simultaneously capture face, iris and fingerprint biometrics of a subject. The device includes a plurality of visible-light cameras and a plurality of infrared-light cameras capable of being triggered simultaneously to obtain a plurality of images from which a 3D image of the light field can be constructed. The device includes a plurality of visible-light illuminators and a plurality of infrared-light illuminators that allow images of a subject to be captured under different lighting profiles. The device may include an onboard control system that is capable of reconstructing a face region, an iris region and a fingerprint region from the 3D light-field image, and then extract a corresponding face template, an iris template, and a fingerprint template from the respective reconstructed regions. The extracted face, iris, and fingerprint templates may be used for enrollment and/or comparison against a biometric-template database associated with one or more watchlists.

Bolme, David S.↗
NASA NTRS2016

Improving Nocturnal Fire Detection with the VIIRS Day-Night Band

Building on existing techniques for satellite remote sensing of fires, this paper takes advantage of the day-night band (DNB) aboard the Visible Infrared Imaging Radiometer Suite (VIIRS) to develop the Firelight Detection Algorithm (FILDA), which characterizes fire pixels based on both visible-light and infrared (IR) signatures at night. By adjusting fire pixel selection criteria to include visible-light signatures, FILDA allows for significantly improved detection of pixels with smaller and/or cooler subpixel hotspots than the operational Interface Data Processing System (IDPS) algorithm. VIIRS scenes with near-coincident Advanced Spaceborne Thermal Emission and Reflection (ASTER) overpasses are examined after applying the operational VIIRS fire product algorithm and including a modified "candidate fire pixel selection" approach from FILDA that lowers the 4-μm brightness temperature (BT) threshold but includes a minimum DNB radiance. FILDA is shown to be effective in detecting gas flares and characterizing fire lines during large forest fires (such as the Rim Fire in California and High Park fire in Colorado). Compared with the operational VIIRS fire algorithm for the study period, FILDA shows a large increase (up to 90%) in the number of detected fire pixels that can be verified with the finer resolution ASTER data (90 m). Part (30%) of this increase is likely due to a combined use of DNB and lower 4-μm BT thresholds for fire detection in FILDA. Although further studies are needed, quantitative use of the DNB to improve fire detection could lead to reduced response times to wildfires and better estimate of fire characteristics (smoldering and flaming) at night.

Day-night band↗
DOE OSTI2024

Calibration improvements expand filterscope diagnostic use

The filterscope diagnostic on DIII-D utilizes photomultiplier tubes to measure visible light emission from the plasma. The system has undergone a substantial upgrade since previous attempts to cross-calibrate the filterscope with other spectroscopic diagnostics were unsuccessful. The optics now utilize a dichroic mirror to initially split the light at nearly 99% transmission or reflectance for light below or above 550 nm. This allows the system to measure D α emission without degrading visible light emission from the plasma for wavelengths below 550 nm (to measure D β , D γ , W–I, C-III, etc.). Additional optimization of the optical components and calibration techniques reduce the error in the signal up to 10% in some channels compared to previous methods. Cross-calibration measurements with two other high resolution spectroscopic diagnostics now show excellent agreement for the first time. This expands the capabilities of the filterscope system allowing measurement of divertor detachment, emission profiles, edge-localized mode behavior, and plasma–wall interactions. Additionally, it enables direct comparisons against calculations from boundary plasma simulations. These were not possible before.

47 OTHER INSTRUMENTATION↗