Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “viewing geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Earth radiation budget - Results of outgoing longwave radiation from Nimbus-7, NOAA-9, and ERBS satellites

Outgoing longwave radiation (OLR) data from Nimbus-7 ERB wide field-of-view instruments are compared with results from the ERBE instruments aboard the NOAA-9 and NOAA-10 satellites. Over most regions of the globe, the agreement between the two sets of OLR results is generally to within 8 W/sq m. There are larger differences at higher latitudes and regions concentrated over land and desert. Results of daytime and nighttime differences suggest that the shortwave channels may be at fault due to their different design for Nimbus-7 and NOAA-9. Some of the differences may also be related to different viewing geometry of the two satellites.

Bess, T. D.↗
NASA NTRS1993

Normalization and calibration of geostationary satellite radiances for the International Satellite Cloud Climatology Project

Procedures are described for normalizing the radiometric calibration of image radiances obtained from geostationary weather satellites that contributed data to the International Satellite Cloud Climatology Project. The key step is comparison of coincident and collocated measurements made by each satellite and the concurrent AVHRR on the 'afternoon' NOAA polar-orbiting weather satellite at the same viewing geometry. The results of this comparison allow transfer of the AVHRR absolute calibration, which has been established over the whole series, to the radiometers on the geostationary satellites. Results are given for Meteosat-2, 3, and 4, for GOES-5, 6, and 7, for GMS-2, 3, and 4 and for Insat-1B. The relative stability of the calibrations of these radiance data is estimated to be within +/- 3 percent; the uncertainty of the absolute calibrations is estimated to be less than 10 percent. The remaining uncertainties are at least two times smaller than for the original radiance data.

Desormeaux, Yves↗
NASA NTRS1993

Seeing ghosts - Photometry of Saturn's G Ring

Saturn's faint and narrow G Ring is only visible to the eye in two Voyager images, each taken at a rather high solar phase angle of about 160 deg. In this paper we introduce a new photometric technique for averaging across multiple Voyager images, and use it to detect the G Ring at several additional viewing geometries. The resultant phase curve suggests that the G Ring is composed of dust particles obeying a very steep power-law size distribution. The dust is generally smaller than that seen in other rings, ranging down to 0.03 micron. The G Ring occupies the region between orbital radii 166,000 and 173,000 km, and has a peak somewhat closer to the inner edge. Based on these limits, we demonstrate that Voyager 2 passed through and directly sampled this ring during its 1981 encounter with Saturn. Combined analysis of additional data sets suggests that a population of larger bodies is also present in the G Ring; these bodies occupy a narrower band near the observed peak and are likely the source for the visible dust. Based on some preliminary dynamical models, we propose that these larger bodies represent leftover debris from the collisional breakup of a small moon in Saturn's distant past.

Showalter, Mark R.↗
NASA NTRS1994

Automated Registration Of Images From Multiple Sensors

Images of terrain scanned in common by multiple Earth-orbiting remote sensors registered automatically with each other and, where possible, on geographic coordinate grid. Simulated image of terrain viewed by sensor computed from ancillary data, viewing geometry, and mathematical model of physics of imaging. In proposed registration algorithm, simulated and actual sensor images matched by area-correlation technique.

Rignot, Eric J. M.↗
NASA NTRS1993

Preliminary analysis of Dione Regio, Venus: The final Magellan regional imaging gap

In Sep. 1992, the Magellan spacecraft filled the final large gap in its coverage of Venus when it imaged an area west of Alpha Regio. F-BIDR's and some test MIDR's of parts of this area were available as of late December. Dione Regio was imaged by the Arecibo observatory and a preliminary investigation of Magellan images supports the interpretations made based on these earlier images: Dione Regio is a regional highland on which is superposed three large, very distinct volcanic edifices. The superior resolution and different viewing geometry of the Magellan images also clarified some uncertainties and revealed fascinating details about this region.

Keddie, S. T.↗
NASA NTRS1993

Global Magellan-image map of Venus at full resolution

During its first 243-day mapping cycle, the Magellan spacecraft succeeded in imaging 84 percent of the surface of Venus at resolutions on the order of 100 meters; subsequent cycles have increased the total coverage to over 97 percent and provided redundant coverage of much of the planet with differing viewing geometries. Unfortunately, this full-resolution global dataset is in the form of thousands of individual orbit tracks (F-BIDR's) whose length-to-width ratio of nearly 1000:1 makes them minimally useful unless mosaicked. The Magellan project produced full-resolution mosaics (F-MIDR's) only for selected regions on the planet, whereas a global set of mosaics was made only at threefold degraded resolution (C1-MIDR's). Furthermore, although the F-MIDR's, which are approximately equidimensional, are much better suited for scientific interpretation than the F-BIDR's, they are still an unwieldy dataset: over 1500 quadrangles, each showing a region only about 600 km on a side, would be required to cover the entire planet. The USGS has therefore undertaken to produce and distribute a global, full resolution set of mosaics of the Magellan image data in a format that will be efficient for both hardcopy and digital use. The initial motivation was that it would provide an efficient means of verifying the integrity of the F-BIDR's to be archived on computer-compatible tape at the USGS Flagstaff facility. However, the resulting product, known as the FMAP, should also serve as an important resource for future scientific interpretation. It will offer several advantages beyond global coverage at full resolution. The first, alluded to above, is its division of the planet's surface to minimize the number of quadrangles and maximize their area, subject to the limits on the number of pixels imposed by state-of-the-art digital recording media and hardcopy output devices. The second, the use of improved 'cosmetic' processing techniques, will greatly reduce tonal discontinuities between component F-BIDR's in the FMAP compared to the standard Magellan mosaic products. Finally, wherever possible, the FMAP will incorporate data that were unavailable (e.g., because of processing delays) when the standard MIDR products were created, as well as data that were reprocessed to improve their radiometric or geometric quality.

Kirk, R. L.↗
NASA NTRS1993

Lunar multispectral mosaics from Galileo's second Earth-Moon flyby

Galileo's Solid-State Imaging (SSI) experiment acquired about 800 images of the Moon from the second Earth-Moon flyby (EM2) in December of 1992. Ten major sequences were acquired; each consists of mosaics of the entire or nearly entire visible and illuminated surface from each viewing geometry in at least six spectral filters (effective wavelengths for the Moon of 420, 564, 660, 756, 890, and 990 nm). The geometries of LUNMOS numbers 3, 4, 5, and 6 were designed to provide stereo data at the best possible resolutions. The purpose of this abstract is to describe the sequences, calibration, processing, and mosaicking, and to present a set of color products in a poster session.

Mcewen, A. S.↗
NASA NTRS1993

Michelson Interferometer (MINT)

MINT is a Michelson interferometer designed to measure the thermal emission from the earth at high spectral resolution (2/cm) over a broad spectral range (250-1700/cm, 6-40 mu m) with contiguous 3-pixel wide (12 mrad, 8 km field of view) along-track sampling. MINT is particularly well suited for monitoring cloud properties (cloud cover, effective temperature, optical thickness, ice/water phase, and effective particle size) both day and night, as well as tropospheric water vapor, ozone, and temperature. The key instrument characteristics that make MINT ideally suited for decadal monitoring purposes are: high wavelength to wavelength precision across the full IR spectrum with high spectral resolution; space-proven long-term durability and calibration stability; and small size, low cost, low risk instrument incorporating the latest detector and electronics technology. MINT also incorporates simplicity in design and operation by utilizing passively cooled DTGS detectors and nadir viewing geometry (with target motion compensation). MINT measurement objectives, instrument characteristics, and key advantages are summarized in this paper.

Lacis, Andrew↗
NASA NTRS1993

UV spectral variability in the Herbig Ae star HR 5999. 11: The accretion interpretation

We report recent IUE high- and low-dispersion observations with the IUE long wavelength camera (LWP) and short wavelength camera (SWP) of the Herbig Ae star HR 5999. We have found a dramatic change in the structure of the Mg II h and k lines (2795.5, 2802.7 A) along with some continuum flux excesses especially at the short end of the SWP camera. LWP high dispersion observations of HR 5999 obtained between 1979 and 1990, at times of comparatively low UV continuum fluxes, exhibit P Cygni type m profiles in the Mg II resonance doublet. In contrast, observations made from September 1990 through March 16-18, 1992, with high W continuum fluxes, present Mg II lines with reverse P Cygni profiles indicative of some active episodic accretion. Accreting gas can also be detected in the additional red wings of the various Fe II and Mn II absorption lines, with velocities up to +300-350 km/s (September 1990). By September 10, 1992 the Mg II profile had returned to the type III P Cygni profile similar to those from earlier spectra. The correlation between the presence of large column densities of accreting gas and the continuum light variations supports suggestions by several authors that HR 5999 is surrounded by an optically thick, viscously heated accretion disk. Detection of accreting gas in the line of sight to HR 5999 permits us to place constraints on our viewing geometry for this system. A discussion is included comparing the spectral and physical similarities between HR 5999 and the more evolved proto-planetary candidate system, beta Pictoris.

Perez, M. R.↗
NASA NTRS1993

Using the SPICE system to help plan and interpret space science observations

A portable multimission information system named SPICE is used to assemble, archive, and provide easy user access to viewing geometry and other ancillary information needed by space scientists to interpret observations of bodies within our solar system. The modular nature of this system lends it to use in planning such observations as well. With a successful proof of concept on Voyager, the SPICE system has been adapted to the Magellan, Galileo and Mars Observer missions, and to a variety of ground based operations. Adaptation of SPICE for Cassini and the Russian Mars 94/96 projects is underway, and work on Cassini will follow, SPICE has been used to support observation planning for moving targets on the Hubble Space Telescope Project. Applications for SPICE on earth science, space physics and other astrophysics missions are under consideration.

Acton, Charles H., Jr.↗
NASA NTRS1993

Temporal and spatial mapping of surface albedo and atmospheric dust opacity on Mars

The Mariner 9 and Viking provided abundant evidence that eolian processes are active over much of the surface of Mars. Past studies have demonstrated that variations in regional albedo and wind-streak patterns are indicative of sediment transport through a region, while thermal inertia data (derived from the Viking Infrared Thermal Mapper (IRTM) dataset) are indicative of the degree of surface mantling by dust deposits. The visual and thermal data are therefore diagnostic of whether net erosion or deposition of dust-storm fallout is taking place currently and whether such processes have been active in a region over the long term. These previous investigations, however, have not attempted to correct for the effects of atmospheric dust loading on observations of the martian surface, so quantitative studies of current sediment transport rates have included large errors due to uncertainty in the magnitude of this 'atmospheric component' of the observations. We have developed a radiative transfer model that allows the atmospheric dust opacity to be determined from IRTM thermal observations. Corrections for the effects of atmospheric dust loading on observations of surface albedo can also be modeled. This approach to determining 'dust-corrected surface albedo' incorporates the atmospheric dust opacity, the single-scattering albedo and particle phase function of atmospheric dust, and the bidirectional reflectance of the surface, and it accounts for variable lighting and viewing geometry.

Lee, S. W.↗
NASA NTRS1993

Temporal and spatial mapping of atmospheric dust opacity and surface albedo on Mars

The Mariner 9 and Viking missions provided abundant evidence that eolian processes are active over much of the surface of Mars. Past studies have demonstrated that variations in regional albedo and wind streak patterns are indicative of sediment transport through a region, while thermal inertia data (derived from the Viking Infrared Thermal Mapper (IRTM) datasets) are indicative of the degree of surface mantling by dust deposits. We are making use of the method developed by T. Z. Martin to determine dust opacity from IRTM thermal observations. We have developed a radiative transfer model that allows corrections for the effects of atmospheric dust loading on observations of surface albedo to be made. This approach to determining 'dust-corrected surface albedo' incorporates the atmospheric dust opacity, the single-scattering albedo and particle phase function of atmospheric dust, the bidirectional reflectance of the surface, and accounts for variable lighting and viewing geometry.

Lee, S. W.↗
NASA NTRS1994

X-ray emission from two nearby millisecond pulsars

This grant, titled 'X-Ray Emission from Two Nearby Millisecond Pulsars,' included ROSAT observations of the nearby pulsars PSR J2322+20 and PSR J2019+24. Neither was detected, although the observations were among the most sensitive ever made towards millisecond pulsars, reaching 1.5 x 10(exp 29) and 2.7 x 10(exp 29) erg s(exp -1) (0.1-2.4 keV), respectively. This is about, or slightly below, the predicted level of emission from the Seward and Wang empirical prediction, based on an extrapolation from slower pulsars. To understand the significance of this result, we have compared these limits with observations of four other millisecond pulsars, taken from the ROSAT archives. Except for the case of PSR B1821-21, where we identified a possible x-ray counterpart, only upper limits on x-ray flux were obtained. From these results, we conclude that x-ray emission beaming does not follow the same dependence on pulsar period as that of radio emission: while millisecond pulsars have beaming fractions near unity in the radio, x-ray emission is observed only for favorable viewing geometries.

Thorsett, S. E.↗
NASA NTRS1994

The global distribution of giant radiating dike swarms on Venus: Implications for the global stress state

Magellan radar data of Venus reveal 163 large radial lineament systems composed of graben, fissure, and fracture elements. On the basis of their structure, plan view geometry, and volcanic associations, at least 72% are interpreted to have formed primarily through subsurface dike swarm emplacement, the remainder through uplift or a combination of these two mechanisms. The population of swarms is used to determine regional and global stress orientation. The stress configuration recorded from 330-210 deg E (Aphrodite Terra) is best explained by isostatic compensation of existing long wavelength topography or coupling between mantle flow and the lithosphere. The rest are correlated with concentrations of rifting and volcanism in the Beta-Atla-Themis region. The global stress field on Venus is different than that of Earth, where plate boundary forces dominate.

Grosfils, Eric B.↗
NASA NTRS1994

An ASCA observation of the Castor system

We report on a day-long ASCA broadband (1-10 keV) spectro-imaging observation of the X-ray emission from the Castor multibinary system. Significant flares were detected from both the flare star system YY Gem (Castor C) and from Castor AB located 73 sec away. Using an optimal viewing geometry and image restoration techniques, we are able to spatially resolve the emission from the two X-ray components. Broadband flare activity from Castor AB is confirmed, and quiescent flux is detected. The quiescent spectrum of YY Gem is a complex blend of emission lines across the ASCA bandpass which requires multitemperature components or two-temperature variable metal-poor abundances (approximately 5-10 below solar) to obtain a satisfactory fit to both the Mewe-Kaastra and Raymond-Smith models. The flare spectrum is consistent with an increase in the emissivity of the hotter component.

Gotthelf, Eric V.↗
NASA NTRS1995

Global tropospheric and total ozone monitoring with a Double-Etalon Fabry-Perot interferometer

Knowledge of the global scale distribution of atmospheric ozone and its temporal variability can be achieved using a satellite-based nadir-viewing device making high spectral resolution measurements with high signal-to-noise ratios. This would enable observation in the pressure-broadened wings of strong O3 lines while minimizing the impact of undesirable signal contributions associated with, for example, the terrestrial surface and interfering species. The Fabry-Perot interferometer (FPI) provides high spectral resolution and high throughput capabilities that are essential for this measurement task. The periodic nature of the Fabry-Perot instrument function can be advantageous when observation of periodic spectra is desired. However, for most applications, additional optical elements are necessary to reduce the effect of unwanted passbands. This is frequently accomplished using additional Fabry-Perot etalons in a series configuration in conjunction with a bandpass filter. This paper discusses a Fabry-Perot interferometer conceptual instrument design to achieve tropospheric and total ozone monitoring capability from a satellite-based nadir-viewing geometry. The design involves a double-etalon fixed-gap series configuration FPI along with an ultra-narrow bandpass filter to achieve single-order operation with an overall spectral resolution of approximately .068 cm(exp -1). The impact of inter-etalon reflections has been reduced to acceptable levels by placement of a slightly attenuating medium in between the etalons. A passive device is selected for low power consumption, and continuous day/night coverage, independent of solar zenith angle, is enabled by observing within the strong 9.6 micron ozone infrared band. The IR-FPI detection will be performed through implementation of the new Circle to Line Interferometer Optical (CLIO) system, developed by researchers at the Space Physics Research Laboratory (SPRL) of the University of Michigan, to accomplish focal plane fringe detection; the CLIO system converts the circular interferometric fringes into a linear pattern which then can be detected by conventional linear array detectors. A multiplex signal advantage is achievable as all necessary frequencies can be measured simultaneously using a multichannel configuration. Through proper selection of channel spectral regions, the FPI optimized for tropospheric O3 measurements can simultaneously observe a stratospheric component and thus the total O3 column abundance.

Larar, Allen M.↗
NASA NTRS1993

Voyager Photometry of Saturn's A Ring

Saturn's A Ring samples a wide range of dynamical environments, from the relatively unperturbed, optically thick inner region to the outer part of the ring, which contains numerous density waves. We analyze Voyager images of the A Ring to determine how the reflectivity of different radial regions varies with lighting and viewing geometry. We model our data with a classical radiative transfer code that includes the illumination of the rings by the Sun and Saturn. The particles in the inner and mid-A Ring have Bond albedos near 0.5 and are more backscattering than satellites of comparable albedo. The region outside the Encke Gap becomes progressively less backscattering with increasing radius. Particle properties change abruptly outside the Keeler Gap; particles here have an albedo near 0.6 and a Lambert-like phase function. In contrast with previous suggestions, the abundance of free, submicrometer "dust" is small throughout the entire A Ring; this conclusion holds even in the outermost A Ring, which is strongly perturbed by density waves. Models derived from low-phase data, assuming only macroscopic particles, correctly predict the highphase reflectivity of the outer A Ring and individual strong density waves in the mid-A Ring. However, the inner and mid-A Ring are typically darker at high phase by a factor of two than our models predict. This discrepancy may be due to the reduced multiple scattering from a layer in which the particles are more closely packed. We have also studied the quadrupole azimuthal brightness asymmetry of the A Ring. The asymmetry has a full amplitude of 35% in the mid-A Ring in low-phase Voyager 2 images. We present results on its behavior and possible implications for the structure of the rings. Finally, we compare our results with studies using other data sets to synthesize our current understanding of the nature of the A Ring.

Dones, Luke↗
NASA NTRS1996

A Near-Global Survey of Cirrus Particle Size Using ISCCP

Cirrus is the most frequently occurring and widely distributed cloud type. The average annual frequency of occurrence for cirrus is 34% and its global coverage is about 20-30% (Warren et al. 1985). It strongly influences weather and climate processes through its effects on the radiation budget of the earth and the atmosphere (Liou 1986). Microphysics of cirrus is a critical component in understanding cloud-climate radiative interactions. For example, ice water content feedback is positive from a 1-D model study. But the feedback is substantially reduced upon the inclusion of small ice crystals (Sinha and Shine 1994). Due to the complexity caused by the non-spherical shape of ice crystals in cirrus, retrievals of cirrus properties are difficult. In recent years, advances have been made both in models and in case studies (e.g., Takano and Liou 1989, Young et al. 1994), but no global scale survey has been conducted. Similar to our previous near-global survey of droplet sizes of liquid water clouds (Han et al. 1994), a survey of cirrus ice crystal sizes is conducted over both continental and oceanic areas. We describe a method for retrieving cirrus particle size information on a near-global scale 50 deg S to 50 deg N using currently available satellite data from ISCCP. To retrieve cirrus particle size, we use a radiative transfer model that includes all major absorbing gases and cloud scattering/absorption to compute synthetic radiances as a function of satellite viewing geometry. Ice crystal shapes are assumed to be hexagonal columns and plates. The model results have been validated against clear sky observations and are consistent with the observed radiance range under cloudy conditions.

Han, Qingyuan↗