Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vessel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A high-pressure flow through test vessel for neutron imaging and neutron diffraction-based strain measurement of geological materials

Neutron scattering and neutron imaging have emerged as powerful methods for experimentally investigating material deformation and fluid flow in the interior of otherwise inaccessible or opaque structures. This paper describes the design and provides example uses of a pressure cell developed for investigating such behaviors within geological materials. The cell can accommodate cylindrical samples with diameters up to 38.1 mm and lengths up to 154 mm. Additionally, ports in the cell and a pressure isolating sleeve around the sample allow the independent application of confining pressure up to 69 MPa and axial pressure up to 34.5 MPa. Furthermore, two material versions of the cell have been manufactured and used to date. An aluminum version is typically used for temperatures below 40 °C, because of its relative transparency to neutrons, while a titanium version, which is comparatively more neutron attenuating, is used for experiments requiring triaxial pressurization under conditions up to 350 °C. The pressure cells were commissioned at the VULCAN engineering diffractometer at the Oak Ridge National Laboratory (ORNL), Spallation Neutron Source, and have since been used at the ORNL high flux isotope reactor CG1-D imaging beamline, National Institute of Standard and Technology (NIST) BT-2, and NIST NG6 imaging beamlines.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

The status of the Japanese material properties handbook and the challenge to facilitate structural design criteria for DEMO in-vessel components

This work summarizes the current status of the material properties handbook for a structural design using Japanese reduced-activation ferritic/martensitic steel F82H. Specifically, the key structural parameters, e.g. time-independent/dependent design stresses and fatigue design curves, were determined by following the French structural design code RCC-MRx. Moreover, under the Japan–U.S. collaboration, tensile data were newly added to the benchmark heavy irradiation data up to 80 dpa, as critical input information in the intermediate check and review in Japan. Furthermore, the status of structural material data and the near-term and long-term issues were clarified by the evaluation using the attribute guides. In parallel, the structural design approaches, which were newly introduced and extended to cope with the structural design issues under the complex environmental conditions peculiar to the DEMO reactor, were noted with the initial R&D results. Of the many design issues, the multi-axial loading conditions due to the complexity of the DEMO reactor as well as the coolant compatibility and the irradiation effect are mentioned. For example, in the paper, multi-axial fatigue–creep testing and evaluation using the modified universal slope method and brittle/ductile fracture testing and evaluation using the local approach are explained toward DEMO.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

SOLEDGE3X full vessel plasma boundary simulations of ITER non-active phase plasmas

The onset of detachment in the ITER machine is analyzed in this work through the help of 2D-axisymmetric boundary plasma simulations with the SOLEDGE3X-EIRENE code, which features a numerical domain for the plasma solver extending up to the first wall. The plasma boundary is computed in scenarios from the first non-active phase of ITER, in pure H and at 20 MW. This set of simulations is used in two aspects: first, to study the plasma detachment in the divertor, and second, the plasma conditions, fluxes, and beryllium erosion at the first wall. Here, the code results are also compared to those obtained with the well-established SOLPS-ITER code, which includes a plasma numerical domain only covering the main SOL. Results show an increase in the SOL width λ q with increasing density, and a detailed analysis is carried out, for the first time, on each of the different plasma-neutral interactions in the code’s physics model in EIRENE. The gross beryllium erosion rates of first wall panels are estimated from 2D simulations, with the aim of assessing their sensitivity to two parameters: the divertor density regime, and the presence of density shoulders in the far-SOL formed by enhanced perpendicular transport at this location. The erosion contributions from neutrals and ions are considered in each case, and the charge-exchange atoms fluxes and energy distributions are provided, highlighting the two atom populations (cold and charge-exchange).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Vessels Irradiation Experimental Campaign

The purpose of this report is to document the neutron flux field characterization experiments and to provide experiment data to validate radiation transport models. To predict material damage, irradiation experiments expose materials to known radiation fields to correlate the exposure to damage effects. As a part of irradiation experiments, the neutron field in the experiment must be well characterized; this characterization includes effects like room return. Only the neutron component of the 252 Cf sources is considered in theses measurements and calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Challenges and Opportunities for the Development of Commercial Maritime Surface Vessel Nuclear Propulsion (CMNP)

Maritime transport and trade are currently responsible for producing nearly 1 billion metric tons of CO2 emissions annually, representing 2.5% of global greenhouse gas emissions. While maritime shipping is acknowledged as the most efficient carrier of goods in terms of its costs and carbon intensity, the sector relies overwhelmingly on the use of heavy fuel oil (HFO). This fuel source currently is unmatched in terms of its global availability, safety, security of supply, price, and energy density. Combined, these characteristics are responsible for the outsized contribution of the sector to the global economy: roughly 90% of all transported goods spend time at sea. Commercial maritime nuclear propulsion provides opportunities to transition maritime trade to clean energy but also comes with challenges. Both are covered in this report based on 60+ interviews with professionals from the maritime and nuclear energy sectors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Capture of Organic Iodides from Vessel Off-Gas Streams

In nuclear waste reprocessing, radioactive iodine is released in both organic and inorganic forms into off-gas streams. Due to its properties of long half-life and potential accumulation in human bodies, radioactive iodine is required to be removed from off-gas streams by the Environmental Protection Agency (EPA) and Nuclear Regulatory Commission (NRC). In this study, the removal of organic iodides using two prototype silver (Ag) adsorbents, i.e., reduced Ag functionalized silica aerogel (Ag 0 -aerogel) and reduced Ag exchanged mordenite (Ag 0 Z), is investigated through a combination of experimental and modeling studies.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗