Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “venus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Investigation of Venus Surface Properties

Strong localized radar echoes have been observed at decimeter wavelengths from the highlands of Venus since the earliest radar maps were obtained over 30 years ago. These echoes are some five to ten times stronger than those from the presumably basaltic rocks seen at lower altitudes elsewhere on Venus. Observations of thermal emission from the visible disk of Venus at wavelengths corresponding to those used in the radar mapping confirm that the regions of high reflectivity also exhibit low emissivity, as expected from considerations of detailed thermodynamic balance. Two possibilities have been put forward to explain this unexpected aspect of the Venus highlands: 1) surface materials of high effective dielectric constant, probably associated with finite electrical conductivity, and 2) volume scattering associated with multiple scattering from a layer of very-low-loss material containing voids and extending down a few hundred wavelengths beneath the surface. Analogs to these two mechanisms are found elsewhere in the solar system, and each is capable of explaining the basic observations. as of the early 1990's. In 1993, however, it became possible to carry out a bistatic observation of the anomalous highland regions using the Magellan spacecraft, then in orbit about Venus. In this experiment the on-board telemetry transmitter was aimed at the planet's surface with its linear S-band polarization vector oriented at 45 deg to the spacecraft-Venus-Earth scattering plane. The pointing of the transmitting antenna was adjusted so that the spacecraft-to-illuminated-surface incidence angle equalled the Earth-to-Venus-surface incidence angle. In this way, the experiment emphasized the specular scattering component. A full Stokes-Vector analysis of the reflected signal as received on Earth was carried out as the illuminated region scanned across the highland regions of Venus. From the observed position angle of the echo, it was possible to calculate the Fresnel reflectivity of a number of regions on Venus, including the high-altitude Maxwell Montes, and to show unequivocally that the complex dielectric constant of that anomalous area was 100 +/- 50i, as compared to 4.0 (real) for the typical lowland area. Thus this experiment was able to rule out definitively an hypothesis of volume scattering as the explanation for the anomalous scattering in the Venus highlands.

Ford, Peter G.↗
NASA NTRS2004

Robotic Exploration of the Surface and Atmosphere of Venus

Venus, the "greenhouse planet", is a scientifically fascinating place. In many ways it can be considered "Earth's evil twin." A huge number of important scientific questions remain to be answered: 1) Before the runaway greenhouse effect, was early Venus temperate? 2) Did Venus once have an ocean? 3) What causes the geological resurfacing of the planet? 4) Is Venus still geologically active? 5) What is the "snow" on Venus mountaintops? 6) Can we learn about Earth's climate from Venus? 7) Is the atmosphere of Venus suitable for life? To address these and other scientific questions, a robotic mission to study the surface and atmosphere of Venus has been designed. The mission includes both surface robots, designed with an operational lifetime of 90 days on the surface of Venus, and also solar-powered airplanes to probe the middle atmosphere. At 450 Celsius, and with 90 atmospheres of pressure of carbon-dioxide atmosphere, the surface of Venus is a hostile place for operation of a probe. This paper will present the mission design, discuss the technology options for materials, power systems, electronics, and instruments, and present a short summary of the mission.

Landis, Geoffrey A.↗
NASA NTRS2017

Venus Global Reference Atmospheric Model Status and Planned Updates

The Venus Global Reference Atmospheric Model (Venus-GRAM) was originally developed in 2004 under funding from NASA's In Space Propulsion (ISP) Aerocapture Project to support mission studies at the planet. Many proposals, including NASA New Frontiers and Discovery, as well as other studies have used Venus-GRAM to design missions and assess system robustness. After Venus-GRAM's release in 2005, several missions to Venus have generated a wealth of additional atmospheric data, yet few model updates have been made to Venus-GRAM. This paper serves to address three areas: (1) to present the current status of Venus-GRAM, (2) to identify new sources of data and other upgrades that need to be incorporated to maintain Venus-GRAM credibility and (3) to identify additional Venus-GRAM options and features that could be included to increase its capability. This effort will de-pend on understanding the needs of the user community, obtaining new modeling data and establishing a dedicated funding source to support continual up-grades. This paper is intended to initiate discussion that can result in an upgraded and validated Venus-GRAM being available to future studies and NASA proposals.

Justh, H. L.↗
NASA NTRS2017

Venus Global Reference Atmospheric Model Status and Planned Updates

The Venus Global Reference Atmospheric Model (Venus-GRAM) was originally developed in 2004 under funding from NASA's In Space Propulsion (ISP) Aerocapture Project to support mission studies at the planet. Many proposals, including NASA New Frontiers and Discovery, as well as other studies have used Venus-GRAM to design missions and assess system robustness. After Venus-GRAM's release in 2005, several missions to Venus have generated a wealth of additional atmospheric data, yet few model updates have been made to Venus-GRAM. This paper serves to address three areas: (1) to present the current status of Venus-GRAM, (2) to identify new sources of data and other upgrades that need to be incorporated to maintain Venus-GRAM credibility and (3) to identify additional Venus-GRAM options and features that could be included to increase its capability. This effort will de-pend on understanding the needs of the user community, obtaining new modeling data and establishing a dedicated funding source to support continual up-grades. This paper is intended to initiate discussion that can result in an upgraded and validated Venus-GRAM being available to future studies and NASA proposals.

Justh, H. L.↗
NASA NTRSDate not supplied

Terrestrial Analogue Studies from ISRO’s Venus Mission Perspective: Polarimetric Radar Properties of Hawaiian Lava Flows

Detection of present and past volcanism on Venus is one of the major goals of the proposed ISRO’s Venus orbiter mission. The S-band, high-resolution (40 m/pixel) fully Polarimetric Synthetic Aperture Radar (PolSAR) instrument on this mission [1] may have the capabilities to detect volcanism within the mission lifetime using repeated PolSAR imagery, and possibly SAR Interferometry (InSAR, experimental mode). The global mapping efforts of Venus by Magellan mission has enabled comprehensive mapping of lava flows and indicated that Venus has an extensive history of volcanism, the ages of which are largely unknown (e.g. [2]). While Magellan radar emissivity data (e.g. [3, 4]) and Near Infrared emissivity data from VIRTIS [5] suggested the occurrence of recent episodes of volcanic activity (e.g. Maat Mons and Ganis Chasma), as well as the presence of stratigraphically young lava flows (e.g. Idunn Mons), measuring changes in radar backscatter amplitude alone to identify lava flows has many challenges. Although very large changes in the shape of the terrain can be observed in radar backscatter amplitude changes (e.g. [6]), smaller, or relatively flat lava flows are difficult to detect. Previous terrestrial studies suggest that PolSAR and InSAR techniques are very effective for mapping lava flows (e.g. [7-9]), and can be used when changes cannot be distinguished in radar backscatter images. We use the unvegetated lava flows on Hawaiʻi island as a terrestrial analogue to study Venus lava flows for the following reasons: (a) It is extensively studied at several wavelengths commonly used in remote sensing studies (including PolSAR and InSAR methods); and (b) it is a volcanically active area with new lava flows frequently covering older emplaced flows. To investigate the surface roughness, texture, and fine-grained mantling associated with Mauna Loa and Kilauea lava flows, we utilize C- and L-band PolSAR datasets obtained from RISAT-1A (EOS-4) and ALOS PALSAR missions respectively. In particular, we will use the quad-polarized backscatter and polarimetric parameters to characterize the texture of the terrestrial lava flows to understand whether the Venus crust is continuously disrupted during flow emplacement. While some previous studies (e.g. [10, 11]) suggested that surface roughness of most of the Venus flows is comparable to that of terrestrial pāhoehoe flows, other studies indicated that fractal dimensions of some large lava flows on Venus imply high eruption rates which favour the formation of a’a flows (e.g. [12]). We will also analyse the terrestrial flows for the presence/absence of pyroclastic mantling as radar-bright diffuse deposits near the summit regions of some coronae on Venus have been proposed to be young pyroclastics, and possible evidence of a renewed epoch of mantle volcanism that taps into deeper volatiles [13]. A recent study using EOS-4 RISAT-1 data of a part of fresh Mauna Loa lava flows (2022 eruption) emphasizes the ability of fully polarimetric SAR data to understand the diversity of physical properties (e.g. texture and morphology) associated with them (Sreejith et al. 2024); and we will apply similar methods to the PolSAR data obtained from ISRO’s Venus mission for our proposed objectives.

Sriram S Bhiravarasu↗
NASA NTRS2012

Advanced Lithium Ion Venus Explorer (ALIVE)

The COncurrent Multidisciplinary Preliminary Assessment of Space Systems (COMPASS) Team partnered with the Applied Research Laboratory to perform a NASA Innovative Advanced Concepts (NIAC) Program study to evaluate chemical based power systems for keeping a Venus lander alive (power and cooling) and functional for a period of days. The mission class targeted was either a Discovery ($500M) or New Frontiers ($750M to $780M) class mission. Historic Soviet Venus landers have only lasted on the order of 2 hours in the extreme Venus environment:temperatures of 460 degrees Centigrade and pressures of 93 bar. Longer duration missions have been studied using plutonium powered systems to operate and cool landers for up to a year. However, the plutonium load is very large. This NIAC study sought to still provide power and cooling but without the plutonium. Batteries are far too heavy but a system which uses the atmosphere (primarily carbon dioxide) and on on-board fuel to power a power generation and cooling system was sought. The resuling design was the Advanced Long-Life Lander Investigating the Venus Environment (ALIVE) Spacecraft (S/C) which burns lithium (Li) with the CO2 atmosphere to heat a Duplex Stirling to power and cool the lander for a 5-day duration (until the Li is exhausted). While it does not last years a chemical powered system surviving days eliminates the cost associated with utilizing a flyby relay S/C and allows a continuous low data rate direct to earth (DTE) link in this instance from the Ovda Regio of Venus. The five-day collection time provided by the chemical power systems also enables science personnel on earth to interact and retarget science - something not possible with an approximately 2-hour spacecraft lifetime. It also allows for contingency operations directed by the ground (reduced risk). The science package was based on that envisioned by the Venus Intrepid Tessera Lander (VITaL) Decadal Survey Study. The Li Burner within the long duration power system creates approximately 14000 W of heat. This 1300 degree Centigrade heat using Li in the bottom "ballast" tank is melted to liquid by the Venus temperature, drawn into a furnace by a wick and burned with atmospheric CO2. The Li carbonate exhaust is liquid at 1300 degrees Centigrade and being denser than Li drains into the the Li tank and solidifies. Since the exhaust product is a dense liquid no "chimney" is required which conserves the heat for the stirling power convertor. The Duplex Stirling provides about 300 W of power and removes about 300 W of heat from the avionics and heat that leaks into the 1-bar-insulated payload pressure vessel kept at 25 degrees Centigrade. The Na K radiator is run to the top of the drag flap.The ALIVE vehicle is carried to Venus via an Atlas 411 launch vehicle (LV) with a C3 of 7 km2/s2. An Aeroshell, derived from the Genesis mission, enables a direct entry into the atmosphere of Venus (-10 degrees Centigrade, 40 g max) and 6 m/s for landing (44 g) using a drag ring. For surface science and communication, a 100 WRF (WebEx Recording Format), X-Band 0.6-meter pointable DTE (Direct-to-Earth) antenna provides 2 kbps (kilobits per second) to DSN (Deep-Space Network) 34-meter antenna clusters.Table 1.1 summarizes the top-level details of each subsystem that was incorporated into the design. Cost estimates of the ALIVE mission show it at approximately $760M which puts it into the New Frontiers class.The ALIVE landed duration is only limited by the amount of Li which can be carried by the lander. Further studies are needed to investigate how additional mass can be carried, perhaps by a larger launcher and larger aeroshell.

Exploration↗
NASA NTRS1983

Venus

The present conference concerning the study of Venus discusses stellar magnitude and albedo data for the planet, radio astronomical studies, results of the Venera 13 and 14 missions, Venus optical properties, topography, surface properties and tectonic evolution, the tectonic implications of the interior of Venus, the thermal structure, photochemistry, composition, general circulation, and electrical activity of the Venus atmosphere, and the thermal balance of the lower, middle and upper atmoshere of Venus. Also discussed are the observation and interpretation of the Venus ionosphere, its model calculation, the interaction of the solar wind with the ionosphere of Venus in light of flow field models, the origin and evolution of the Venus atmosphere, and the problem posed by rare gases in the atmosphere of Venus.

Hunten, D. M.↗
NASA NTRS1992

Venus and Mars: Atmospheres, ionospheres, and solar wind interactions; Proceedings of the Chapman Conference, Balatonfured, Hungary, June 4-8, 1990

The present conference discusses the evolution and chemistry-surface interactions of the Venus and Mars atmospheres, the properties of thermospheric gravity waves on earth, Venus, and Mars, far-UV remote sensing of Mars and Venus, in situ results for the Venus ionosphere, radio occultation data for the Mars and Venus ionospheres, and solar-wind interactions with Mars. Also discussed are evidence for waves in the Venus and Mars atmospheres, an interpretation of the large-scale ionospheric magnetic fields of the Venus and Mars daysides' ionospheric plasma, a computer model of solar wind interaction with Venus and Mars, and solar-wind effects on the atmospheric evolution of Venus and Mars.

Luhmann, Janet G.↗
NASA NTRS1993

Giant radiating dyke swarms on Earth and Venus

On Earth, giant radiating dyke swarms are usually preserved as fan-shaped fragments which have been dismembered from their original configuration by subsequent plate tectonic rifting events. Analysis of the largest fragments and consideration of their original configuration has led to the idea that many swarms are plume related, and that dyke swarms radiate away from plume centers. Magellan radar data reveal abundant intact giant radiating swarms on Venus which are similar in scale and pattern to those on Earth. The absence of intense weathering and plate tectonic processes on Venus accounts for the preservation of the primary radiating patterns. It is characteristic of both Earth and Venus that giant radiating dikes are emplaced laterally for distances of at least 2000 km away from plume centers. At distances beyond the influence of the plume on both Earth and Venus, the radiating dyke pattern is often swept into a linear pattern aligned with the regional stress field. There is tremendous potential synergism between the characterization and analysis of terrestrial dyke swarms (where significant erosion has revealed their structure and emplacement directions at depth) and the giant swarms of Venus (where the complete circumferential structure is preserved, and the surface fracture systems above near surface dikes and the nature of the central source regions are revealed). In this study, we report on the characteristics of radial dyke swarms on Earth and Venus and draw some preliminary comparisons from the two perspectives. In summary, on both planets there is evidence for plume-related magmatic centers associated with vertical and lateral injection of magma over considerable distances (up to at least 2000 km). The abundance of very broadly radiating swarms on Venus supports the notion that the swarms on Earth were radiating over broad sectors at the time of intrusion but were dissected by later events. The Venus data show that a swarm can change from radiating (proximal) to regional (distal) subparallel orientations. An implication for Earth is that many regional linear swarms which do not have a radiating pattern may be due to fragmentation of the swarm during later plate tectonic rifting. Completion of the global classification and census of Venus features, comparison to the terrestrial synthesis, and documentation of the mode of emplacement of dikes in these environments (buffered and unbuffered conditions) should lead to additional general insight into mechanisms of formation and evolution and their relation to plumes.

Ernst, Richard E.↗
NASA NTRS2004

Lunar and Planetary Science XXXV: Venus

The session "Venus" included the following reports:Is It Possible to Detect Magnetic Materials on Venus with Bistatic Radar Probing?; Airfall Crater Deposits on the Surface of Venus: Do We See Them in the Venera Panoramas?; Rift System Architecture on Venus; Constraints on Deformation Belt Evolution on Venus; An Admittance Survey of Large Volcanoes on Venus: Implications for Volcano Growth; Crustal Thickening Above a Convecting Mantle with Application to Venus and Mars; Geological Mapping of Venus: Interpretation of Geologic History and Assessment of; Directional and Non-Directional Models; Ages of Venusian Ridge Belts Relative to Regional Plains; and Plumes as a Mechanism for Equilibrium Resurfacing of Venus.

Source record↗
NASA NTRS2004

Communications Transceivers for Venus Surface Missions

The high temperature of the surface of Venus poses many difficulties. Previous Venus landers have only operated for short durations before succumbing to the heat. NASA Glenn Research Center conducted a study on communications for long duration Venus surface missions. I report the findings in this presentation. Current technology allows production of communications transceivers that can operate on the surface of Venus, at temperatures above 450 C and pressures of over 90 atmospheres. While these transceivers would have to be relatively simple, without much of the advanced signal processing often used in modern transceivers, since current and near future integrated circuits cannot operate at such high temperatures, the transceivers will be able to meet the requirements of proposed Venus Surface mission. The communication bands of interest are High Frequency or Very High Frequency (HFNHF) for communication between Venus surface and airborne probes (including surface to surface and air to air), and Ultra High Frequency (UHF) to Microwave bands for communication to orbiters. For HFNHF, transceivers could use existing vacuum tube technology. The packaging of the vacuum tubes may need modification, but the internal operating structure already operates at high temperatures. Using metal vacuum structures instead of glass, allows operation at high pressure. Wide bandgap transistors and diodes may be able to replace some of the thermionic components. VHF communications would be useful for line-of- sight operations, while HF would be useful for short-wave type communications using the Venusian ionosphere. UHF and microwave communications use magnetically focused thermionic devices, such as traveling wave tubes (TWTs), magnetron (M-type) amplifiers, and klystrons for high power amplifiers, and backward wave oscillators (BWOs) and reflex klystrons for oscillators. Permanent magnets are already in use in industry that can operate at 500 C. These magnets could focus electron beam tubes on the surface of Venus. While microwave windows will need to be designed for the high pressure, diamond windows have already been demonstrated, so high-pressure microwave windows can be designed and built. Thus, all of these devices could be useful for Venus surface missions. Current electronic power conditioners to supply the high voltages used in these microwave devices cannot operate at high temperatures, but earlier electronic power conditioners that used vacuum tubes can be modified to work at high temperature. Evaluating the various devices in this study, the M-type traveling wave tube (where a traveling wave structure is used in a crossed-field device, similar to the Amplitron used on the Apollo missions) stood out for the high power amplifier since it requires a single high voltage, simplifying the power supply design. Since the receiver amplifier is a low power amplifier, the loss of efficiency in linear beam devices without a depressed collector (and thus needing a single high voltage) is not important; a low noise TWT is a possible solution. Before solid-state microwave amplifiers were available, such TWTs were built with a 1-2 dB noise figure. A microwave triode or transistor made from a wide bandgap material may be preferable, if available. Much of the development work needed for Venusian communication devices will need to focus on the packaging of the devices, and their connections, but the technology is available to build transceivers that can operate on the surface of Venus indefinitely.

Force, Dale A.↗
NASA NTRS2011

Characterizing Volcanic Eruptions on Venus: Some Realistic (?) Scenarios

When Pioneer Venus arrived at Venus in 1978, it detected anomalously high concentrations of SO2 at the top of the troposphere, which subsequently declined over the next five years. This decline in SO2 was linked to some sort of dynamic process, possibly a volcanic eruption. Observations of SO2 variability have persisted since Pioneer Venus. More recently, scientists from the Venus Express mission announced that the SPICAV (Spectroscopy for Investigation of Characteristics of the Atmosphere of Venus) instrument had measured varying amounts of SO2 in the upper atmosphere; VIRTIS (Visible and Infrared Thermal Imaging Spectrometer) measured no similar variations in the lower atmosphere (ESA, 4 April, 2008). In addition, Fegley and Prinn stated that venusian volcanoes must replenish SO2 to the atmosphere, or it would react with calcite and disappear within 1.9 my. Fegley and Tremain suggested an eruption rate on the order of approx 1 cubic km/year to maintain atmospheric SO2; Bullock and Grinspoon posit that volcanism must have occurred within the last 20-50 my to maintain the sulfuric acid/water clouds on Venus. The abundance of volcanic deposits on Venus and the likely thermal history of the planet suggest that it is still geologically active, although at rates lower than Earth. Current estimates of resurfacing rates range from approx 0.01 cubic km/yr to approx 2 cubic km/yr. Demonstrating definitively that Venus is still volcanically active, and at what rate, would help to constrain models of evolution of the surface and interior, and help to focus future exploration of Venus.

Stofan, E. R.↗
NASA NTRS2014

Zephyr: A Landsailing Rover for Venus

With an average temperature of 450C and a corrosive atmosphere at a pressure of 90 bars, the surface of Venus is the most hostile environment of any planetary surface in the solar system. Exploring the surface of Venus would be an exciting goal, since Venus is a planet with significant scientific mysteries, and interesting geology and geophysics. Technology to operate at the environmental conditions of Venus is under development. A rover on the surface of Venus with capability comparable to the rovers that have been sent to Mars would push the limits of technology in high-temperature electronics, robotics, and robust systems. Such a rover would require the ability to traverse the landscape on extremely low power levels. We have analyzed an innovative concept for a planetary rover: a sail-propelled rover to explore the surface of Venus. Such a rover can be implemented with only two moving parts; the sail, and the steering. Although the surface wind speeds are low (under 1 m/s), at Venus atmospheric density even low wind speeds develop significant force. Under funding by the NASA Innovative Advanced Concepts office, a conceptual design for such a rover has been done. Total landed mass of the system is 265 kg, somewhat less than that of the MER rovers, with a 12 square meter rigid sail. The rover folds into a 3.6 meter aeroshell for entry into the Venus atmosphere and subsequent parachute landing on the surface. Conceptual designs for a set of hightemperature scientific instruments and a UHF communication system were done. The mission design lifetime is 50 days, allowing operation during the sunlit portion of one Venus day. Although some technology development is needed to bring the high-temperature electronics to operational readiness, the study showed that such a mobility approach is feasible, and no major difficulties are seen.

rover↗
NASA NTRS2008

Mission Architecture and Technology Options for a Flagship Class Venus In Situ Mission

Venus, as part of the inner triad with Earth and Mars, represents an important exploration target if we want to learn more about solar system formation and evolution. Comparative planetology could also elucidate the differences between the past, present, and future of these three planets, and can help with the characterization of potential habitable zones in our solar system and, by extension, extrasolar systems. A long lived in situ Venus mission concept, called the Venus Mobile Explorer, was prominently featured in NASA's 2006 SSE Roadmap and supported in the community White Paper by the Venus Exploration Analysis Group (VEXAG). Long-lived in situ missions are expected to belong to the largest (Flagship) mission class, which would require both enabling and enhancing technologies beside mission architecture options. Furthermore, extreme environment mitigation technologies for Venus are considered long lead development items and are expected to require technology development through a dedicated program. To better understand programmatic and technology needs and the motivating science behind them, in this fiscal year (FY08) NASA is funding a Venus Flaghip class mission study, based on key science and technology drivers identified by a NASA appointed Venus Science and Technology Definition Team (STDT). These mission drivers are then assembled around a suitable mission architecture to further refine technology and cost elements. In this paper we will discuss the connection between the final mission architecture and the connected technology drivers from this NASA funded study, which - if funded - could enable a future Flagship class Venus mission and potentially drive a proposed Venus technology development program.

Balint, Tibor S.↗
NASA NTRSDate not supplied

Active Volcanoes of Kamchatka as Suitable Terrestrial Analogs for Future Landing Missions and for Change Detection Analysis on Venus

The next decade will see the return to Venus due to a number of missions which have been recently selected and proposed for launch. The selected missions NASA DAVINCI and VERITAS, Roscosmos Venera-D, and ESA EnVision, along with the proposed missions ISRO Shukrayaan- 1, and CNSA VOICE, will open a new era for the exploration of the Earth’s hellish twin planet. These missions will shed new light on the science questions such as: (a) whether recent volcanic activity is locally constrained, or active volcanism occurs on a global scale; (b) the rate of the present-day volcanic activity; (c) the styles of volcanism on Venus, including possible occurrences of pyroclastic/explosive volcanism; and (d) how does the extreme environment on Venus effect volcanic activity. In preparation for these future missions to Venus, the Analogs for VENus’ GEologically Recent Surfaces (AVENGERS) initiative has the scope to select and analyze a number of active terrestrial volcanoes as suitable analogs for the identification and analysis of active volcanism on Venus. The Roscosmos Venera-D is the only mission, among the currently selected or planned mission, equipped with a lander to analyze the elemental and mineralogical composition of the surface. Therefore, it is crucial to find applicable volcanic areas on Earth to perform operational tests such as surface drilling and in-situ elemental composition analysis. To this regard, we propose the analysis of active volcanoes of the Kamchatka Peninsula, which is in a geodynamic setting (subduction) contrasting to that of the volcanic rises on Venus (hot spot). Thus, Kamchatka may represent a helpful geodynamic endmember to put the expected landing site of the Venera-D mission within the context of the entire variety of volcanic landforms and surface chemistry. The Kamchatka Peninsula is located on the eastern margin of the Eurasian plate, in proximity to the Kuril-Kamchatka subduction zone. The frequent eruptions characterizing the volcanoes of the Kamchatka Peninsula make them a suitable terrestrial analog for the possible detection of ongoing eruptions on Venus by future missions, which can be achieved by comparing a sequence of radar images of the same volcano and its surroundings taken at different times. Moreover, it is possible to collect samples of both unweathered and weathered volcanic deposits, to analyze their near infrared spectra in the laboratory for direct comparison with the spectra to be provided by the future missions to Venus. The chemical analyses of Venusian surface materials from the previous Soviet Venera and Vega missions are consistent with that of tholeiitic basalts. Since the volcanism of the Kamchatka Peninsula is characterized by both basaltic lava flows eruptions and pyroclastic activity, performing operational tests in the Kamchatka Peninsula also offers the unique opportunity to provide us the tools to potentially interpret the diverse output given by both effusive and explosive volcanic products.

Piero D'Incecco↗
DOE OSTI2024

Haasttse‐baad Tessera Ring Complex: A Valhalla‐Type Impact Structure on Venus?

Abstract Venus preserves ∼1,000 impact craters, yet to date no impact basins larger than 300 km in diameter—common in the oldest terrains on Mercury, Mars and the Moon—are recognized on Venus. The tessera terrain is Venus' oldest recognized terrain. We describe a ∼1,500 km‐diameter concentric ring‐graben complex preserved on Haasttse‐baad Tessera, Venus that we identify as the Haasttse‐baad Tessera Ring Complex (HTRC). Based on geologic relations and numerical modeling, we propose that the HTRC may represent a Valhalla‐type multiring impact basin formed late during the evolution of its host ribbon‐tessera terrain (rtt). Formation of Valhalla‐type impact basins could involve a unique three‐layer target rheology with a thin elastic layer above a low viscosity layer above a deep strong layer. This multi‐layer rheological sandwich is consistent with crustal rheology previously proposed for the formation of Venus' rtt. If the HTRC is a Valhalla‐type impact basin, it would be Venus' oldest, and currently largest, impact structure, providing a rare window into Venus' ancient past and with implications for early crustal processes on Venus.

58 GEOSCIENCES↗
NASA NTRSDate not supplied

A Brief Overview of Relevant Silicon Carbide Electronics and Sensor Development for Long Duration Venus Surface Exploration

This presentation concentrates on the potential of long duration Venus surface missions, and the role of Silicon Carbide (SiC) electronics and sensor advancements in such exploration. For example, SiC integrated circuit (IC) electronics have matured to a state where a simple long-life scientific probe is feasible for extended Venus surface operations. These electronics have been demonstrated for more than a year at 500˚C, and 60 days in high-fidelity simulated Venus surface conditions [1-2]. Further, high temperature chemical sensing technology, including SiC-based gas sensors, integrated with SiC electronics can enable future exploration of the Venus surface atmosphere [3]. Continued maturation of these high temperature electronics and sensors has been part of the Long-Lived In-Situ Solar System Explorer (LLISSE) project to provide an operational system for in situ exploration of the Venus surface up to 60 days [4]. A key focus of this work includes increasing the complexity and decreasing the power consumption of the ICs which will pave the way to enhanced capabilities, such as long-duration Venus seismic measurements and other mission capabilities currently under development. This is in parallel to work expanding the capabilities of the sensor technology to provide science measurements on the Venus surface. This presentation will give an overview of possible extended duration Venus surface exploration and some of the SiC-based technologies that can enable this exploration.

high temperature Venus surface electronics sensors↗
NASA NTRS1983

Pioneer Venus

Venus before Pioneer, the Pioneer Venus mission, Pioneer Venus spacecraft, scientific investigation, mission to Venus scientific results, and results of Soviet studies of Venus are addressed. A chronology of exploration of Venus from Earth before the Pioneer Venus mission and Venus nomenclature and mythology are provided.

Fimmel, Richard O.↗