Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “utility selection process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

Applications of Time-Reversal Processing for Planetary Surface Communications

Due to the power constraints imposed on wireless sensor and communication networks deployed on a planetary surface during exploration, energy efficient transfer of data becomes a critical issue. In situations where groups of nodes within a network are located in relatively close proximity, cooperative communication techniques can be utilized to improve the range, data rate, power efficiency, and lifetime of the network. In particular, if the point-to-point communication channels on the network are well modeled as frequency non-selective, distributed or cooperative beamforming can employed. For frequency-selective channels, beamforming itself is not generally appropriate, but a natural generalization of it, time-reversal communication (TRC), can still be effective. Time-reversal processing has been proposed and studied previously for other applications, including acoustical imaging, electromagnetic imaging, underwater acoustic communication, and wireless communication channels. In this paper, we study both the theoretical advantages and the experimental performance of cooperative TRC for wireless communication on planetary surfaces. We give a brief introduction to TRC and present several scenarios where TRC could be profitably employed during planetary exploration. We also present simulation results illustrating the performance of cooperative TRC employed in a complex multipath environment and discuss the optimality of cooperative TRC for data aggregation in wireless sensor networks

Barton, Richard J.↗
NASA NTRS1973

An interpretation of a geologic map of Fannin County, Texas, prepared by ADP techniques from ERTS MSS data

Multispectral scanner data, collected by ERTS-1 from an area in northeast Texas underlain by structurally simple cretaceous sedimentary rocks, were analyzed using several automatic data processing techniques. Training areas for the computer analysis were selected in three ways using: (1) an unsupervised classifier, (2) the unsupervised classifier to further refine training areas, and (3) available ground information. The first two methods utilize the capability of the unsupervised classifier to the unsupervised classifier to group resolution elements with similar spectral properties. With the imagery produced by these procedures, several geologic features can be identified. The most easily recognizable features are streams and other water bodies. The approximate location of contacts between several rock units can be mapped.

Henderson, J. A., Jr.↗
NASA NTRS2001

Beagle 2: The Next Exobiology Mission to Mars

Beagle 2 is a 60 kg probe (with a 30 kg lander) developed in the United Kingdom for inclusion on the European Space Agency's 2003 Mars Express. Beagle 2 will deliver to the Martian surface a payload which consists of a high percentage of science instruments to landed spacecraft mass. Beagle 2 will be launched in June, 2003 with Mars Express on a Soyuz-Fregat rocket from the Baikonur Cosmodrome in Kazakhstan. Beagle 2 will land on Mars on December 26, 2003 in the Isidis Planitia basin (approximately 10 degrees N and 275 degrees W), a large sedimentary basin that overlies the boundary between ancient highlands and northern plains. Isidis Planitia, the third largest basin on Mars, which is possibly filled with sediment deposited at the bottom of long-standing lakes or seas, offers an ideal environment for preserving traces of life. Beagle 2 was developed to search for organic material and other volatiles on and below the surface of Mars in addition to the study of the inorganic chemistry and mineralogy. Beagle 2 will utilize a mechanical mole and grinder to obtain samples from below the surface, under rocks and inside rocks. A pair of stereo cameras will image the landing site along with a microscope for examination of surface and rock samples. Analyses will include both rock and soil samples at various wavelengths, X-ray spectrometer and Mossbauer spectrometer as well as a search for organics and other light element species (e.g. carbonates and water) and measurement of their isotopic compositions. Beagle 2 has as its focus the goal of establishing whether evidence for life existed in the past on Mars at the Isidis Planitia site or at least establishing if the conditions were ever suitable. Carbonates and organic components were first recognized as existing on Mars when they were found in the Martian meteorite Nakhla. Romanek et al showed the carbonates in ALH84001 were formed at low temperatures. McKay et al noted possible evidence of early life on Mars within the ALH84001 meteorite. Thomas-Keprta et al showed the magnetite biomarkers in ALH84001's carbonates are indistinguishable from those formed by magnetotactic bacteria found on Earth. Gibson et al showed there was significant evidence for liquid water and biogenic products present on Mars across a 3.9 billion year period. A mechanical arm (PAW) operates from the lander and is used for science operations along with sample acquisition. Instruments attached to the PAW include: stereo cameras, Mossbauer instrument, X-ray fluorescence instrument, microscope, environmental sensors, rock corer/grinder, a spoon, mirror, brushes, a mole attachment for acquisition of subsurface to depths of 1 to 2 meters and an illumination device. Each camera has 14 filters which have been optimized for mineralogy composition, dust and water vapor detection. The microscope's camera is designed for viewing the size and shape of dust particles, rock surfaces, microfossils, and characteristics of the samples prior to introduction into the gas analysis package (GAP). The camera has a resolution of 4 microns/pixel, features four color capability (red, green, blue and UV (ultraviolet) fluoresence), a depth of focus of 40 micrometers and translation stage of +3 millimeters. The heart of the Beagle 2's life detection package is the gas analysis package (GAP), which consists of a mass spectrometer with collectors at fixed masses for precise isotopic ratio measurements and voltage scanning for spectral analysis. Primary aim of the GAP is to search for the presence of bulk constituents, individual species, and isotopic fractionations for both extinct and extent life along with studying the low-temperature geochemistry of the hydrogen, carbon, nitrogen and oxygen components on Mars from both the surface and atmosphere. GAP is a magnetic sector mass spectrometer with the range of 1 to 140 amu which can be operated in both the static and dynamic modes. A triple Faraday collector array will be used for C, N and O ratios along with a double Faraday array for H/D. Pulse counting electron multiplier will be utilized for noble gases and selected organics. Anticipated detection limits are at the picomole level for operation in the static mode of operation and high precision isotopic measurements will be made in the dynamic mode. Sample processing and preparation system consists of reaction vessels along with references. Sample ovens capable of being heated are attached to the manifold for sample combustion. Surface, subsurface materials and interior rock specimens will be combusted in pure oxygen gas at various temperature intervals to release organic matter and volatiles. Combustion process will permit detection of all forms and all atoms of carbon present in the samples. A chemical processing system is capable of a variety of conversion reactions. Gases are manipulated either by cryogenic or chemical reactions and passed through the gas handling portion of the vacuum system. There are two modes of operation: quantitative analysis and precise isotopic measurements. Additional information is contained in the original extended abstract.

Gibson, Everett K., Jr.↗
NASA NTRSDate not supplied

Communication and Social Science in the Satellite Needs Working Group (SNWG) Assessment

Every two years, NASA conducts an in-depth assessment of the satellite Earth observation data needs of U.S. federal civilian agencies submitted through the Satellite Needs Working Group (SNWG) survey. The SNWG assessment occurs at the nexus of science and people: in the 2022 assessment, over 100 scientists across NASA, NOAA, and USGS were organized to interview over 165 end users at 29 agencies about their unique satellite needs, brainstorm a range of solutions to meet those needs, and communicate back to agencies about resources available for meeting their needs. The innovative approaches to communication, organization, and team make-up that will be described in this talk are vital to the success of the SNWG assessment. As the first major step in evaluating a satellite need, the tri-agency assessment team interviews the agency SMEs who submitted the survey to understand how satellite data could help inform their decision-making process or enable them to fulfill their key responsibilities. In preparation, NASA utilizes social scientists to provide training to all assessment participants on how to hold a discovery-centered interview, including starting with a purpose, creating a welcoming space, exploring all aspects and edges of the need, and brainstorming possible solutions to meet the need. After the interviews, assessment participants propose and review solutions across all thematic areas, seeking those that will help multiple agencies. During the selection process, agencies expected to benefit from a new solution have an opportunity to provide feedback on the proposed activity and are invited to co-design the solution with NASA, should it be implemented. The organization of needs and solutions takes place in Asana, a workflow management tool adapted for the SNWG assessment, and the Report Generation Tool (RGT) enables assessment teams to collaboratively write reports that are returned to each agency with information on current and upcoming resources that help meet their needs.

Katrina Virts↗
NASA NTRS1977

Input/output error analyzer

Program aids in equipment assessment. Independent assembly-language utility program is designed to operate under level 27 or 31 of EXEC 8 Operating System. It scans user-selected portions of system log file, whether located on tape or mass storage, and searches for and processes 1/0 error (type 6) entries.

Vaughan, E. T.↗
NASA NTRS1987

A computer program for performance prediction of tripropellant rocket engines with tangential slot injection

For the development of a Heavy Lift Launch Vehicle (HLLV) several engines with different operating cycles and using LOX/Hydrocarbon propellants are presently being examined. Some concepts utilize hydrogen for thrust chamber wall cooling followed by a gas generator turbine drive cycle with subsequent dumping of H2/O2 combustion products into the nozzle downstream of the throat. In the Space Transportation Booster Engine (STBE) selection process the specific impulse will be one of the optimization criteria; however, the current performance prediction programs do not have the capability to include a third propellant in this process, nor to account for the effect of dumping the gas-generator product tangentially inside the nozzle. The purpose is to describe a computer program for accurately predicting the performance of such an engine. The code consists of two modules; one for the inviscid performance, and the other for the viscous loss. For the first module, the two-dimensional kinetics program (TDK) was modified to account for tripropellant chemistry, and for the effect of tangential slot injection. For the viscous loss, the Mass Addition Boundary Layer program (MABL) was modified to include the effects of the boundary layer-shear layer interaction, and tripropellant chemistry. Calculations were made for a real engine and compared with available data.

Dang, Anthony↗
NASA NTRS2002

Process for a High Efficiency Class D Microwave Power Amplifier Operating in the S-Band

A process and product providing a High Efficiency Microwave Power Amplifier (HEMPA) which propagates S-Band microwave frequency square waves; utilizing a program simulating FETs at high DC-to-RF efficiencies, which analyses linear elements of selected FETs in a frequency domain, and non-linear elements of the FETs in a time domain, and converts the time domain values into the frequency domain, and performs DC and S-parameter simulated measurements based on predefined data for each FET. Individual FET parameters are extracted and isolated by converting the S-parameters to admittance or impedance parameters to derive FET models for each FET, which the program uses to provide a final output of a HEMPA circuit based on iterative simulations of an amplification circuit utilizing microwave topology and frequencies. Iterative simulations of the amplification circuit analyze output values of a plurality of cascaded stages of the FETs, which are arranged in a push-pull configuration.

William Herbert Sims, III↗
NASA NTRS2002

NASA Principal Center for Review of Clean Air Act Regulations

The Clean Air Act (CAA) regulations have greatly impacted materials and processes utilized in the manufacture of aerospace hardware. Code JE/ NASA's Environmental Management Division at NASA Headquarters recognized the need for a formal, Agency-wide review process of CAA regulations. Marshall Space Flight Center (MSFC) was selected as the 'Principal Center for Review of Clean Air Act Regulations'. This presentation describes the centralized support provided by MSFC for the management and leadership of NASA's CAA regulation review process.

Clark-Ingram, Marceia↗
NASA NTRS2004

Enhanced Characterization of Microorganisms in the Spacecraft Environment

Spacecraft such as the International Space Station (ISS) and the space shuttles are enclosed environments where crewmembers may spend long periods of time. Currently, crewmembers spend approximately a period of 6 months in the ISS. It is known that these prolonged stays in space may result in weakening of the immune system. Therefore, exposure to opportunistic pathogens or high concentrations of environmental microorganisms may compromise the health of the crew. The detection of biocontaminants in spacecraft environments utilizes culture-based methodology, omitting greater than 90% of all microorganisms including pathogens such as Legionella and Cryptosporidium. Culturable bacteria and fungi have been the only allergens studied; the more potent allergens, such as those from dust mites, have never been tested for in spacecraft environments. In addition, no attempts have been made to monitor microbial toxins in spacecrafts. The present study utilized quantitative polymerase chain reaction (QPCR) as a novel approach for monitoring microorganisms in the spacecraft environment. QPCR is a molecular biology technique that does not rely on the physiological state of the organisms for identification, thereby enabling detection of both culturable and non-culturable organisms. In this project, specific molecular primers and probes were utilized for the detection and quantitation of two fungi of concern in indoor environments, Aspergillus fumigatus and Stachybotrys chartarum. These organisms were selected because of the availability of PCR primers and probes, and to establish the sample processing and analysis methodology that may be employed with additional organisms. Purification methods and QPCR assays were optimized for the detection of these organisms in air, surface, and water; and sample processing and analysis protocols were developed. Preliminary validation of these protocols was conducted in the laboratory with air, surface, and water samples seeded with known concentrations of the target organisms. Additional studies were conducted with bulk materials (HEPA filter pleats and particulate found on the filter screen) obtained from the ISS.

Cruz, Patricia↗
NASA NTRS2019

Bringing Analysis Closer to Data: Developing a Visualization Tool for L2 Earth Science Satellite Data

Earth Science satellite missions provide a unique opportunity for scientists to visualize complex and multifaceted observations projected geospatially across maps of the Earth. While visualization tools can help scientists comprehend, analyze, and share data, visualizing Level-2 Earth Sciences data poses its own specific set of challenges. Since the geospatial information in Level-2 data files is stored as independent variables, the plotting process involves matching dimensional information from latitude and longitude with a desired variable. Variables are stored in different ways across various Earth Science data file formats, which complicates the process of extracting data and plotting variables from a given file without requiring extensive user input and prerequisite familiarity with the file type variable structure. In coordination with NASA’s Goddard Earth Sciences Data Information Services Center (GES DISC), the team developed a Level-2 Earth Science data visualization tool that aims to address some of the complexities associated with plotting Level-2 data. This tool offers command-line and user interface support for file and variable selection to accommodate varying use cases and degrees of user familiarity with the structure of a given file. The visualization tool is written in Python 3 and utilizes a modular approach to facilitate continued expansion and reuse. In addressing some common complications involved in plotting Level-2 Earth Sciences data, the tool aims to help to link the process of analysis more directly with data acquisition and visualization, bringing analysis closer to data across levels of processing.

Li, Angela W.↗
NASA NTRS1983

Simultaneous elastic and photoelastic calibration of birefringent orthotropic model materials

Transmission photoelastic analysis of composite models has been shown in recent years to be a viable stress analysis method for composite structures. However, difficulties in the fabrication of the model materials require the development of efficient mechanical and optical calibration procedures. In this paper, the methods for measuring elastic and photoelastic constants of composites are briefly reviewed. Then a new method, utilizing a relatively small calibration specimen, is described. In this method, electrical resistance strain gauges are mounted at selected points of a half-plane model and photoelastic measurements and strain readings are simultaneously taken. The data are processed by a least-squares procedure to yield the elastic and photoelastic constants. Comparison of results obtained by the proposed method with the results from conventional tests shows good agreement.

Prabhakaran, R.↗
NASA NTRS1992

Method of forming variable cross-sectional shaped three-dimensional fabrics

Method of weaving a variable cross-sectional shaped three-dimensional fabric which utilizes different weft yarn insertion from at least one side of the warp layers for selectively inserting weft yarns into different portions of the fabric cross-sectional profile defined by the warp yarn layers during the weaving process. If inserted from both sides of the warp yarn layers, the weft yarns may be inserted simultaneously or alternately from each side of the warp yarn layers. The vertical yarn is then inserted into the fabric by reciprocation of a plurality of harnesses which separate the vertical yarn into a plurality of vertical yarn systems as required by the shape of the three-dimensional fabric being formed.

Mohamed, Mansour H.↗
NASA NTRS2019

State Predictor of Classification Cognitive Engine Applied to Channel Fading

This study presents the application of machine learning (ML) to a space-to-ground communication link, showing how ML can be used to detect the presence of detrimental channel fading. Using this channel state information, the communication link can be used more efficiently by reducing the amount of lost data during fading. The motivation for this work is based on channel fading observed during on-orbit operations with NASA's Space Communication and Navigation (SCaN) testbed on the International Space Station (ISS). This paper presents the process to extract a target concept (fading and not-fading) from the raw data. The pre-processing and data exploration effort is explained in detail, with a list of assumptions made for parsing and labelling the dataset. The model selection process is explained, specifically emphasizing the benefits of using an ensemble of algorithms with majority voting for binary classification of the channel state. Experimental results are shown, highlighting how an end-to-end communication system can utilize knowledge of the channel fading status to identity fading and take appropriate action. With a laboratory testbed to emulate channel fading, the overall performance is compared to standard adaptive methods without fading knowledge, such as adaptive coding and modulation.

Fading↗
NASA NTRS1991

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 7:Summary report to phase 2 respondents including frequency distributions

Phase 2 of the four phase NASA/DoD Aerospace Knowledge Diffusion Research Project was undertaken to study the transfer of scientific and technical information (STI) from government to the aerospace industry and the role of librarians and technical information specialists in the transfer process. Data was collected through a self-administered mailback questionnaire. Libraries identified as holding substantial aerospace or aeronautical technical report collections were selected to receive the questionnaires. Within each library, the person responsible for the technical report was requested to answer the questionnaire. Questionnaires were returned from approx. 68 pct. of the libraries. The respondents indicated that scientists and engineer are not aware of the services available from libraries/technical information centers and that scientists and engineers also under-utilized their services. The respondents also indicated they should be more involved in the process.

Pinelli, Thomas E.↗
NASA NTRS2011

Thermal Energy for Lunar In Situ Resource Utilization: Technical Challenges and Technology Opportunities

Oxygen production from lunar raw materials is critical for sustaining a manned lunar base but is very power intensive. Solar concentrators are a well-developed technology for harnessing the Sun s energy to heat regolith to high temperatures (over 1375 K). The high temperature and potential material incompatibilities present numerous technical challenges. This study compares and contrasts different solar concentrator designs that have been developed, such as Cassegrains, offset parabolas, compound parabolic concentrators, and secondary concentrators. Differences between concentrators made from lenses and mirrors, and between rigid and flexible concentrators are also discussed. Possible substrate elements for a rigid mirror concentrator are selected and then compared, using the following (target) criteria: (low) coefficient of thermal expansion, (high) modulus of elasticity, and (low) density. Several potential lunar locations for solar concentrators are compared; environmental and processing-related challenges related to dust and optical surfaces are addressed. This brief technology survey examines various sources of thermal energy that can be utilized for materials processing on the lunar surface. These include heat from nuclear or electric sources and solar concentrators. Options for collecting and transporting thermal energy to processing reactors for each source are examined. Overall system requirements for each thermal source are compared and system limitations, such as maximum achievable temperature are discussed.

Gordon, Pierce E. C.↗
NASA NTRS1989

PMR Graphite Engine Duct Development

The objective was to demonstrate the cost and weight advantages that could be obtained by utilizing the graphite/PMR15 material system to replace titanium in selected turbofan engine applications. The first component to be selected as a basis for evaluation was the outer bypass duct of the General Electric F404 engine. The operating environment of this duct was defined and then an extensive mechanical and physical property test program was conducted using material made by processing techniques which were also established by this program. Based on these properties, design concepts to fabricate a composite version of the duct were established and two complete ducts fabricated. One of these ducts was proof pressure tested and then run successfully on a factory test engine for over 1900 hours. The second duct was static tested to 210 percent design limit load without failure. An improved design was then developed which utilized integral composite end flanges. A complete duct was fabricated and successfully proof pressure tested. The net results of this effort showed that a composite version of the outer duct would be 14 percent lighter and 30 percent less expensive that the titanium duct. The other type of structure chosen for investigation was the F404 fan stator assembly, including the fan stator vanes. It was concluded that it was feasible to utilize composite materials for this type structure but that the requirements imposed by replacing an existing metal design resulted in an inefficient composite design. It was concluded that if composites were to be effectively used in this type structure, the design must be tailored for composite application from the outset.

Stotler, C. L.↗
NASA NTRS1979

Commercialization of materials processing in space

The primary motivation of the Materials Processing in Space program is the scientific and commercial utilization of the effects of the unique environments of space on material processes. The reduction or elimination of the pervasive influences of gravity on Earth-based process mechanisms affords opportunities for understanding and improving ground-based processing or producing select materials in space which, typically, would be of low volume, high value commercial interest. Additionally, the unlimited, if not 'hard' vacuum of space affords equally interesting influences on material processes. To evolve the commercialization of Materials Processing in Space, the program seeks to establish and demonstrate the scientific/technological precepts for analyzing and using the space environment and, in parallel, to establish the legal and management mechanisms to implement commercial ventures.

Zoller, L. K.↗
NASA NTRS2000

A Parallel Genetic Algorithm for Automated Electronic Circuit Design

Parallelized versions of genetic algorithms (GAs) are popular primarily for three reasons: the GA is an inherently parallel algorithm, typical GA applications are very compute intensive, and powerful computing platforms, especially Beowulf-style computing clusters, are becoming more affordable and easier to implement. In addition, the low communication bandwidth required allows the use of inexpensive networking hardware such as standard office ethernet. In this paper we describe a parallel GA and its use in automated high-level circuit design. Genetic algorithms are a type of trial-and-error search technique that are guided by principles of Darwinian evolution. Just as the genetic material of two living organisms can intermix to produce offspring that are better adapted to their environment, GAs expose genetic material, frequently strings of 1s and Os, to the forces of artificial evolution: selection, mutation, recombination, etc. GAs start with a pool of randomly-generated candidate solutions which are then tested and scored with respect to their utility. Solutions are then bred by probabilistically selecting high quality parents and recombining their genetic representations to produce offspring solutions. Offspring are typically subjected to a small amount of random mutation. After a pool of offspring is produced, this process iterates until a satisfactory solution is found or an iteration limit is reached. Genetic algorithms have been applied to a wide variety of problems in many fields, including chemistry, biology, and many engineering disciplines. There are many styles of parallelism used in implementing parallel GAs. One such method is called the master-slave or processor farm approach. In this technique, slave nodes are used solely to compute fitness evaluations (the most time consuming part). The master processor collects fitness scores from the nodes and performs the genetic operators (selection, reproduction, variation, etc.). Because of dependency issues in the GA, it is possible to have idle processors. However, as long as the load at each processing node is similar, the processors are kept busy nearly all of the time. In applying GAs to circuit design, a suitable genetic representation 'is that of a circuit-construction program. We discuss one such circuit-construction programming language and show how evolution can generate useful analog circuit designs. This language has the desirable property that virtually all sets of combinations of primitives result in valid circuit graphs. Our system allows circuit size (number of devices), circuit topology, and device values to be evolved. Using a parallel genetic algorithm and circuit simulation software, we present experimental results as applied to three analog filter and two amplifier design tasks. For example, a figure shows an 85 dB amplifier design evolved by our system, and another figure shows the performance of that circuit (gain and frequency response). In all tasks, our system is able to generate circuits that achieve the target specifications.

Long, Jason D.↗