Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “trigger efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Investigating the Role of Polymer Architecture in Poly(methyl methacrylate) Depolymerization

Advanced architectures in polymers have garnered traction within the last two decades due to their distinct and tunable properties compared to linear analogs. However, the effects of architecture on nascent polymethacrylate depolymerization strategies remain underexplored. Herein, we investigate the depolymerization behavior of poly(methacrylate)-based star copolymers synthesized via a core-first approach. By incorporating either labile chain-end or pendent-group triggers, we demonstrate the first direct comparison of bulk depolymerization behaviors in star versus linear methacrylate copolymers under matched conditions. While pendent-triggered systems required higher loadings of N-(methacryloxy)phthalimide methacrylate (PhthMA) to achieve similar mass loss compared to linear copolymers, chain-end-initiated depolymerization showed enhanced efficiency of monomer liberation in the star topology. Furthermore, these findings highlight the importance of considering macromolecular architecture in designing sustainable polymers and provide actionable guidelines for installing depolymerization triggers based on polymer topology.

Copolymers↗
DOE OSTI2018

Upgrade of the ATLAS Thin Gap Chamber Electronics for HL-LHC

The High-Luminosity LHC (HL-LHC) is planned to start its operation in 2026 with an instantaneous luminosity of 7.5×10 34 cm -2 s -1 . Studies with data taken by ATLAS indicate that the upgraded first level trigger with fast tracking for HL-LHC can reduce the rate of a single muon trigger by 25% for the p T threshold of 20 GeV while maintaining similar efficiency. First prototype of the ATLAS Thin Gap Chamber frontend board has been developed with most of the functions required for HL-LHC implemented. Performance of data transfer has been demonstrated with charged particle beams at the CERN SPS beam facility.

Kawaguchi, Tomomi↗
DOE OSTI2018

Evolution of Oxyhalide Crystals under Electron Beam Irradiation: An in Situ Method To Understand the Origin of Structural Instability

The oxyhalides have attracted growing interest because of their excellent photocatalytic performance. However, their structural instability hampers further development toward practical applications, a major challenge of current concerns. It is appealing to figure out the origin of structural instability and guide the design of advanced oxyhalide crystals for efficient photocatalysis. In this study, the decomposition of BiOCl crystals, a typical oxyhalide, is triggered by electron beam irradiation and investigated in situ by transmission electron microscopy. The results indicate that the instability originates from the unique layered structure of BiOCl crystals; the interlayer van der Waals bonds are easily broken under electron beam irradiation via the assistance of hydroxyl groups. This facilitates the formation of O/Cl-deficient BiO 1–x Cl 1–y species, Bi metal nanoparticles, and nanobubbles (gaseous substance) that are confined between the adjacent layers. Surface reconstruction would be an effective way to stabilize the oxyhalide crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2024

CO2 response screen in grass Brachypodium reveals the key role of a MAP kinase in CO2-triggered stomatal closure

Abstract Plants respond to increased CO2 concentrations through stomatal closure, which can contribute to increased water use efficiency. Grasses display faster stomatal responses than eudicots due to dumbbell-shaped guard cells flanked by subsidiary cells working in opposition. However, forward genetic screening for stomatal CO2 signal transduction mutants in grasses has yet to be reported. The grass model Brachypodium distachyon is closely related to agronomically important cereal crops, sharing largely collinear genomes. To gain insights into CO2 control mechanisms of stomatal movements in grasses, we developed an unbiased forward genetic screen with an EMS-mutagenized B. distachyon M5 generation population using infrared imaging to identify plants with altered leaf temperatures at elevated CO2. Among isolated mutants, a “chill1” mutant exhibited cooler leaf temperatures than wild-type Bd21-3 parent control plants after exposure to increased CO2. chill1 plants showed strongly impaired high CO2-induced stomatal closure despite retaining a robust abscisic acid-induced stomatal closing response. Through bulked segregant whole-genome sequencing analyses followed by analyses of further backcrossed F4 generation plants and generation and characterization of sodium azide and CRISPR-cas9 mutants, chill1 was mapped to a protein kinase, Mitogen-Activated Protein Kinase 5 (BdMPK5). The chill1 mutation impaired BdMPK5 protein-mediated CO2/HCO3− sensing together with the High Temperature 1 (HT1) Raf-like kinase in vitro. Furthermore, AlphaFold2-directed structural modeling predicted that the identified BdMPK5-D90N chill1 mutant residue is located at the interface of BdMPK5 with the BdHT1 Raf-like kinase. BdMPK5 is a key signaling component that mediates CO2-induced stomatal movements and is proposed to function as a component of the primary CO2 sensor in grasses.

Lopez, Bryn N. K. (ORCID:0009000937288216)↗
DOE OSTI2025

Particle Acceleration in Collisionless Magnetically Arrested Disks

We present the first collisionless realization of two-dimensional axisymmetric black hole accretion consistent with a persistent magnetically arrested disk state. The accretion flow, consisting of an ion-electron disk plasma combined with magnetospheric pair creation effects, is simulated using first-principles general-relativistic particle-in-cell methods. The simulation is evolved over significant dynamical timescales during which a quasisteady accretion state is reached with several magnetic flux eruption cycles. We include a realistic treatment of inverse Compton scattering and pair production, which allows for studying the interaction between the collisionless accretion flow and pair-loaded jet. Our findings indicate that magnetic flux eruptions associated with equatorial magnetic reconnection within the black hole magnetosphere and the formation of spark gaps are locations of maximal particle acceleration. Flux eruptions, starting near the central black hole, can trigger Kelvin-Helmholtz-like vortices at the jet-disk interface that facilitate efficient mixing between disk and jet plasma in this region. Transient periods of increased pair production following magnetic flux eruptions and reconnection events are responsible for most of the highly accelerated particles.

Accretion disk & black-hole plasma↗
DOE OSTI2023

CHEETAH: Compact High Efficiency Electrically Tunable Amplifier (Abbreviated Final Report)

The goal of this project was to develop a new type of optically triggered, high speed and high power switch for radiofrequency applications with potential to exceed current state-of-the-art power and bandwidth. This device operates under a new operation principle, where discrete packets of charge carriers are generated with defined size. These are then swept out of the device at high enough fields to prevent diffusion and expansion of these packets. Individual pulse width are determined by the spatial extent of these packets and their drift velocity, which would enable control over both amplitude and frequency by control of the initial packet size, illumination intensity, and applied voltage. This effort demonstrated this new mode of operation, while uncovering a new regime of pulse compression using negative differential mobility (NDM) semiconductors such as GaAs, where the output electrical pulse is substantially shorter than the input optical pulse.

42 ENGINEERING↗
DOE OSTI2015

Failure Mechanisms and Color Stability in Light-Emitting Diodes during Operation in High- Temperature Environments in Presence of Contamination

The energy efficiency of light-emitting diode (LED) technology compared to incandescent light bulbs has triggered an increased focus on solid state luminaries for a variety of lighting applications. Solid-state lighting (SSL) utilizes LEDs, for illumination through the process of electroluminescence instead of heating a wire filament as seen with traditional lighting. The fundamental differences in the construction of LED and the incandescent lamp results in different failure modes including lumen degradation, chromaticity shift and drift in the correlated color temperature. The use of LED-based products for safety-critical and harsh environment applications necessitates the characterization of the failure mechanisms and modes. In this paper, failure mechanisms and color stability has been studied for commercially available vertical structured thin film LED (VLED) under harsh environment conditions with and without the presence of contaminants. The VLED used for the study was mounted on a ceramic starboard in order to connect it to the current source. Contamination sources studied include operation in the vicinity of vulcanized rubber and adhesive epoxies in the presence of temperature and humidity. Performance of the VLEDs has been quantified using the measured luminous flux and color shift of the VLEDs subjected to both thermal and humidity stresses under a forward current bias of 350 mA. Results indicate that contamination can result in pre-mature luminous flux degradation and color shift in LEDs.

Lall, Pradeep↗
DOE OSTI2018

Mu2e Calorimeter Clustering Studies [Slides]

aMu2e (muon-to-electron-conversion), an Intensity Frontier experiment at Fermilab set to begin data taking in 2022, will search for flavor violation in charged leptons with a muon decaying to only an electron without any neutrinos. Protons will be accelerated by the 8GeV proton beam before reaching Mu2e’s production target. From there, pions enter an S-shaped Transport Solenoid and travel through a series of absorbers and collimators to select low-energy negatively charged muons from pion decay that will hit the stopping target. Downstream from the stopping target are a curved straw tracker and two annular disk crystal calorimeters. The signal will be a mono-energetic e- with an energy close to the rest mass of a muon. The Mu2e expected single event sensitivity is 2.87e-17. The complimentary trigger strategy will take advantage of both online track searches from the tracker and calorimeter reconstruction. The trigger requires a rejection factor greater than 100 and m ust make its decision within a 3ms time budget. In order to provide high efficiency on signal events, our calorimeter clustering algorithms must be accurate and meet the timing performance. I will discuss the expected performance of two clustering algorithms: a fast algorithm to be used at the trigger level and a more accurate clustering algorithm to be used in the offline reconstruction. The fast algorithm defines clusters by only selecting crystals adjacent to a high energy crystal seed. The full-blown algorithm can find smaller clusters separated from the main cluster, within a distance and timing window, and combine them into one cluster. We have analyzed the topology of the reconstructed clusters by the two algorithms on events with only a conversion electron and combined signal and background events. The goal of these studies is to improve the performance of the fast algorithm to better reconstruct the cluster energy and work within the strict timing budget.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2016

Bond breaking in epoxy systems: A combined QM/MM approach

A novel method to combine quantum mechanics (QM) and molecular mechanics has been developed to accurately and efficiently account for covalent bond breaking in polymer systems under high strain without the use of predetermined break locations. Use of this method will provide a better fundamental understanding of the mechano-chemical origins of fracture in thermosets. Since classical force fields cannot accurately account for bond breaking, and QM is too demanding to simulate large systems, a hybrid approach is required. In the method presented here, strain is applied to the system using a classical force field, and all bond lengths are monitored. When a bond is stretched past a threshold value, a zone surrounding the bond is used in a QM energy minimization to determine which, if any, bonds break. The QM results are then used to reconstitute the system to continue the classical simulation at progressively larger strain until another QM calculation is triggered. In this way, a QM calculation is only computed when and where needed, allowing for efficient simulations. A robust QM method for energy minimization has been determined, as well as appropriate values for the QM zone size and the threshold bond length. Compute times do not differ dramatically from classical molecular mechanical simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Fast b -tagging at the high-level trigger of the ATLAS experiment in LHC Run 3

The ATLAS experiment relies on real-time hadronic jet reconstruction and b-tagging to record fully hadronic events containing b-jets. These algorithms require track reconstruction, which is computationally expensive and could overwhelm the high-level-trigger farm, even at the reduced event rate that passes the ATLAS first stage hardware-based trigger. In LHC Run 3, ATLAS has mitigated these computational demands by introducing a fast neural-network-based b-tagger, which acts as a low-precision filter using input from hadronic jets and tracks. It runs after a hardware trigger and before the remaining high-level-trigger reconstruction. This design relies on the negligible cost of neural-network inference as compared to track reconstruction, and the cost reduction from limiting tracking to specific regions of the detector. In the case of Standard Model HH → bb̅bb̅, a key signature relying on b-jet triggers, the filter lowers the input rate to the remaining high-level trigger by a factor of five at the small cost of reducing the overall signal efficiency by roughly 2%.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2015

Enzyme-activated intracellular drug delivery with tubule clay nanoformulation

Fabrication of stimuli-triggered drug delivery vehicle is is an important milestone in treating cancer. Here we demonstrate the selective anticancer drug delivery into human cells with biocompatible 50-nm diameter halloysite nanotube carriers. Physically-adsorbed dextrin end stoppers secure the intercellular release of brilliant green. Drug-loaded nanotubes penetrate through the cellular membranes and their uptake efficiency depends on the cells growth rate. Intercellular glycosyl hydrolases-mediated decomposition of the dextrin tube-end stoppers triggers the release of the lumen-loaded brilliant green, which allowed for preferable elimination of human lung carcinoma cells (А549) as compared with hepatoma cells (Hep3b). In conclusion, the enzyme-activated intracellular delivery of brilliant green using dextrin-coated halloysite nanotubes is a promising platform for anticancer treatment.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Ballistic Ejection of Microdroplets from Overpacked Interfacial Assemblies

Spontaneous emulsification, resulting from the assembly and accumulation of surfactants at liquid–liquid interfaces, is an interfacial instability where microdroplets are generated and diffusively spread from the interface until complete emulsification. Here, it is shown that an external magnetic field can modulate the assembly of paramagnetic nanoparticle surfactants (NPSs) at liquid–liquid interfaces to trigger an oversaturation in the areal density of the NPSs at the interface, as evidenced by a marked reduction in the interfacial tension, γ, and corroborated with a magnetostatic continuum theory. Despite the significant reduction in γ, the presence of the magnetic field does not cause stable interfaces to become unstable. Upon rapid removal of the field, however, an explosive ejection of a plume of microdroplets from the surface occurs, a dynamical interfacial instability which is termed explosive emulsification. Further, this explosive event rapidly reduces the areal density of the NPSs to its pre-field level, stabilizing the interface. The ability to externally suppress or trigger the explosive emulsification and controlled generation of tens of thousands of microdroplets, uncovers an efficient energy storage and release process, that has potential applications for controlled and directed delivery of chemicals and remotely controlled soft microrobots, taking advantage of the ferromagnetic nature of the microdroplets.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Molecular dynamics of laser-assisted decomposition of unstable molecules at the surface of carbon nanotubes: case study of CH 2 (NO 2 ) 2 on CNT(4,0)

In this study, photoreactions of the dinitromethane molecule noncovalently adsorbed on the (4, 0) carbon nanotube (CNT) have been investigated by time-dependent, excited-state molecular dynamics, which takes into account simultaneous evolution of electronic excitation and nuclear positions under periodic optical excitations. It is found that desorption of molecular adsorbate from CNT surface can be controlled by UV-vis photoexcitations. In addition, it is shown that the presence of CNT substrate facilitates photodecomposition of the adsorbate molecule, related to optically controlled explosion. This model demonstrates potential of photoinduced charge transfer between the adsorbate and substrate, which can affect efficiency of desorption and decomposition reactions. This process has a potential use as a remote trigger for larger scale detonations, or as a mechanism for ‘cleaning’ CNTs of unwanted functionalisation.

Disrud, Brendon↗
DOE OSTI2015

Intermediate Energies for Nuclear Astrophysics and the Development of a Position Sensitive Microstrip Detector System

The chemical elements are made at astrophysical sites through a sequence of nuclear reactions often involving unstable nuclei. The overarching aim of this project is to construct a system that allows for the inverse process of nucleosynthesis (i.e. breakup of heavier nuclei into lighter ones) to be studied in high efficiency. The specific problem to be overcome with this grant is inadequate dynamic range and (triggering) threshold to detect the products of the breakup which include both heavy ions (with large energy and large deposited energy in a detector system) and protons (with little energy and deposited energy.) Early on in the grant we provided both TAMU and RIKEN (the site of the eventual experiments) with working systems based on the existing technology. This technology could be used with either an external preamplifier that was to be designed and fabricated by our RIKEN collaborators or upgraded by replacing the existing chip with one we designed. The RIKEN external preamplifier project never can to completion but our revised chip was designed, fabricated, used in a test experiment and performs as required.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Probing Ultrafast Charge Transfer Dynamics in Heterostructured Nanomaterials

The increasing demand for renewable and low‐cost energy has triggered a vast amount of research aimed at developing, characterizing and optimizing materials that can efficiently convert sun light into useful chemical energy in the form of electricity or chemical fuels. So‐ called quantum dot sensitized solar cell (QDSC) materials have gained much attention in recent years based on the advantageous physicochemical properties of semiconducting quantum dots (QDs) as sensitizers, as well as their promising potential to increase the conversion efficiency beyond the Shockley‐Queisser limit of ∼33% by making use of hot‐electron transfer (HET) routes and multiple exciton generation (MEG). By finely tuning the size of the QDs, the band gap can be carefully aligned to the metal oxide (MO) conduction band such that charge transfer from the photoexcited QD is thermodynamically favorable.

14 SOLAR ENERGY↗
DOE OSTI2025

The Trigger System of ICARUS-T600 Detector at Fermilab

The ICARUS-T600 liquid argon (LAr) time projection chamber (TPC) detector is currently deployed as a far detector of the Short Baseline Neutrino (SBN) program at Fermilab (USA) to search for a possible LSND-like sterile neutrino signal at $\Deltam^2 \approx 1eV^2$ with the Booster (BNB) and Main Injector (NuMI) Neutrino Beams. A global physical event rate of $\approx 0.6$ Hz, including the genuine neutrino interactions in LAr, beam halos and cosmic interactions inside the proton pulse time windows, is expected, roughly corresponding to $\approx 4$ PB of data for the total 6.6 $10^{20}$ pot exposure if the full ICARUS-T600 detector is readout ($\approx 200$ MB event size). The designed trigger system described here will collect the genuine neutrino interactions with a $\approx 95$\% expected efficiency.

Copello, S. [INFN, Pavia]↗
DOE OSTI2025

Rapid Inference of Logic Gate Neural Networks for Anomaly Detection in High Energy Physics

The increasing data rates and complexity of detectors at the Large Hadron Collider (LHC) necessitate fast and efficient machine learning models, particularly for rapid selection of what data to store, known as triggering. Building on recent work in differentiable logic gates, we present a public implementation of a Convolutional Differentiable Logic Gate Neural Network (CLGN). We apply this to detecting anomalies at the Level-1 Trigger at CMS using public data from the CICADA project. We demonstrate that the CLGN achieves physics performance on par with or superior to conventional quantized neural networks. We also synthesize an LGN for a Field-Programmable Gate Array (FPGA) and show highly promising FPGA characteristics, notably zero Digital Signal Processor (DSP) resource usage. This work highlights the potential of logic gate networks for high-speed, on-detector inference in High Energy Physics and beyond.

FOS: Physical sciences↗
DOE OSTI2017

GMC Collisions as Triggers of Star Formation. III. Density and Magnetically Regulated Star Formation

We study giant molecular cloud (GMC) collisions and their ability to trigger star cluster formation. We further develop our three-dimensional magnetized, turbulent, colliding GMC simulations by implementing star formation subgrid models. Two such models are explored: (1) “Density-Regulated,” i.e., fixed efficiency per free-fall time above a set density threshold and (2) “Magnetically Regulated,” i.e., fixed efficiency per free-fall time in regions that are magnetically supercritical. Variations of parameters associated with these models are also explored. In the non-colliding simulations, the overall level of star formation is sensitive to model parameter choices that relate to effective density thresholds. In the GMC collision simulations, the final star formation rates and efficiencies are relatively independent of these parameters. Between the non-colliding and colliding cases, we compare the morphologies of the resulting star clusters, properties of star-forming gas, time evolution of the star formation rate (SFR), spatial clustering of the stars, and resulting kinematics of the stars in comparison to the natal gas. We find that typical collisions, by creating larger amounts of dense gas, trigger earlier and enhanced star formation, resulting in 10 times higher SFRs and efficiencies. The star clusters formed from GMC collisions show greater spatial substructure and more disturbed kinematics.

79 ASTRONOMY AND ASTROPHYSICS↗