Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transference number”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Optimization of Dimensions of Smooth and Twisted-Tape-Inserted Tubes for Heat Transfer with NaCl/KCl/MgCl 2 Molten Salts by Principle of Entropy Generation Minimization

The entropy generation minimization principle is used as the criterion to optimize the flow and heat transfer of solar collectors and heat exchangers that use molten salts NaCl–KCl–MgCl 2 and KCl–MgCl 2 . The Gnielinski correlation for the Nusselt number versus Reynolds number, as well as the Moody friction factor given by Petukhov, was used for the calculation of the convective heat transfer coefficient and pressure loss due to friction in smooth tubes. For twisted-tap-inserted tube, equations of Nu and friction factor provided by Manglik and Bergles were used. The objective function, the entropy generation rate of the heat transfer system, was expressed as the function of Reynolds number, Prandtl number, heating flux, tube diameter, etc. As a result of the analysis, the optimum Reynolds number was determined and thereby to determine the optimum Nusselt number, convective heat transfer coefficient, friction factor, and tube diameter, which also allows the calculation of optimum flow velocity. The analysis was conducted in the fluid temperature range of 500–700 °C, which covers the operation temperature for supercritical CO 2 power cycles in concentrated solar power (CSP) system. Here, optimized results from the smooth tube and twisted-tap-inserted tube are compared, which is important to the design of solar receivers for CSP systems.

14 SOLAR ENERGY↗
DOE OSTI2026

Modeling Flow and Mass Transfer within Hollow Fiber Packaging for Gas Separation

Hollow fiber membrane modules are used for gas purification by their selective permeation properties. Intensification of the process to minimize the retentate loss and gas pressure involves optimization at various scales. In this work, we outline a numerical investigation of the gas separation performance at the scale of fiber bundles and its impact on module performance. Flow channeling and anisotropy govern the mass-transfer coefficient in axial and cross-flow configurations. These effects are quantified in terms of a permeability tensor or an anisotropy ratio and the effective mass-transfer coefficient or the Sherwood number. The results show a trade-off between purification and recovery. While smaller fibers offer a large specific surface area to enable high purification, it comes at a huge penalty on the separation performance due to reduced penetration within bundles. Optimum performance indicators are emphasized.

Fibers↗
DOE OSTI2022

Adapting UFF4MOF for Heterometallic Rare-Earth Metal–Organic Frameworks

Heterometallic metal–organic frameworks based on rare-earth metals (RE-MOFs) have potential in a number of applications where energy transfer between nearby metal atoms is required. This observation implies that it is important to understand the level of local mixing that is achieved between metals of different types during synthesis of RE-MOFs. Density functional theory calculations can give quantitative information on the relative energy of different configurations of RE-MOFs, but these calculations cannot be applied to the full range of medium- and long-range orderings that are possible in heterometallic materials. This limitation can be overcome using force field (FF)-based calculations if appropriate FFs are available. In this work, we show that an existing generic FF for MOFs, UFF4MOF, does not accurately predict energies of mixing in heterometallic Nd/Yb MOFs and introduce a modified FF to address this shortcoming. The resulting FF is used to explore metal orderings in large simulation volumes for a Nd/Yb MOF, illustrating the complexities that can arise in the structure of heterometallic RE-MOFs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Early Career Paths at Los Alamos National Laboratory

We represent a selection of early career staff at LANL with backgrounds in mathematics. There are many possible paths to a position at LANL. The lab has very active graduate research and postdoctoral programs, and it is not uncommon for graduate students to become postdocs, who can then be “converted” to staff. Conversion from being a postdoc is not the only route to a position at LANL, nor is it a guarantee, but most of us did postdocs here before becoming staff. Being a postdoc here also gives you an idea of whether you’d like living in northern New Mexico, a rugged, beautiful, and somewhat remote area. It is important to say here that citizenship is not a requirement for many of the positions at the lab. The lab historically and currently welcomes investigators from all over the world. LANL offers a broad spectrum of mathematical challenges that are largely problem driven. Particularly to those who feel that academic mathematics can be stove-piped, with a focus on deep but not necessarily broad expertise, the LANL environment gives the flexibility to move and grow in many different directions. The lab encourages a team-based approach to problems, which not only enhances the breadth of our approach to solving problems, but also gives team members access to new fields. From the outside (academia), however, it can be difficult to see how fields map between academia and the lab. This is one of the reasons that having interaction with the lab as a graduate student or postdoc can be helpful in understanding if the environment would be a good match for you. An important advantage of working at the lab is our high visibility both in academia, as well as in industry and the government. Because of its mission-driven projects, LANL, and more broadly the Department of Energy Laboratories, help set research directions that are picked up by researchers in academia. For this reason, many lab staff have worked at LANL for a number of years, then have transferred into academia after having set the agenda for their field of expertise. Below, we will share some of our experiences, opinions, and reflections in order to give the reader a feel for our own early career experiences.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Electron ionization via dark matter-electron scattering and the Migdal effect

There are currently several existing and proposed experiments designed to probe sub-GeV dark matter (DM) using electron ionization in various materials. The projected signal rates for these experiments assume that this ionization yield arises only from DM scattering directly off electron targets, ignoring secondary ionization contributions from DM scattering off nuclear targets. We investigate the validity of this assumption and show that if sub-GeV DM couples with comparable strength to both protons and electrons, as would be the case for a dark photon mediator, the ionization signal from atomic scattering via the Migdal effect scales with the atomic number Z and 3-momentum transfer q as Z 2 q 2 . The result is that the Migdal effect is always subdominant to electron scattering when the mediator is light, but that Migdal-induced ionization can dominate over electron scattering for heavy mediators and DM masses in the hundreds of MeV range. We put these two ionization processes on identical theoretical footing, address some theoretical uncertainties in the choice of atomic wave functions used to compute rates, and discuss the implications for DM scenarios where the Migdal process dominates, including for XENON10, XENON100, and the recent XENON1T results on light DM scattering.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Dynamical generation of the baryon asymmetry from a scale hierarchy

We propose a novel baryogenesis scenario where the baryon asymmetry originates directly from a hierarchy between two fundamental mass scales: the electroweak scale v and the Planck scale M P , in the form of Y B ∼ v M P . This relation straightforwardly gives the observed baryon yield today Y B , which can be a hint for underlying fundamental physics. We provide an example of baryogenesis models that yield this relation. Our model is based on the neutrino-portal Affleck-Dine mechanism, which generates the asymmetry of the Affleck-Dine sector during the radiation-dominated era and subsequently transfers it to the baryon number before the electroweak phase transition. The observed baryon asymmetry is then a natural outcome of this scenario. The model is testable as it predicts the existence of a Majoron with a keV mass and an electroweak scale decay constant. The impact of the relic Majoron on the effective number of neutrinos ( Δ N eff ) can be measured through near-future cosmic microwave background observations. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Inertia Emulation Control using Demand Response via 5G Communications

Building energy equipment is moving rapidly towards Internet of Things (IoT)-driven devices to provide consumer connectivity and device management. These device-level interfaces along with 5G communications will be leveraged to develop control architectures to engage a large number of monitoring and control devices and provide real-time and reliable energy services. Emerging 5G networks have high potential to provide the communication technology for demand response, with fast transfer speed, high reliability, and high number of connections. Guaranteed inertial response to limit frequency fluctuations is one of the main challenges in modern power systems due to the increased penetration of renewable generation, and it is largely affected by communication delays and packet losses. This paper analyzes inertial response and rate of change of frequency in a power system model with inverter-interfaced air conditioners. The control loop considers time delays and packet losses to show the need to switch to 5G networks in future smart grids.

Morovati, Samaneh↗
DOE OSTI2021

Analysis of convection heat transfer on multiscale rough superhydrophobic and liquid infused surfaces

Multiscale rough superhydrophobic or slippery liquid infused porous surfaces have gained much interest in recent years for their improved transport phenomena properties. While there have been several studies on drag reduction and condensation on non-wetting surfaces, convection heat transfer that is important in many thermal and thermochemical applications has not been addressed systematically. Here, this article utilizes a fractal description of rough surface topographies to develop analytical models for the Nusselt number and the thermal hydraulic factor for fluid flow and heat transfer inside a cylinder with non-wetting surfaces. For air-infused superhydrophobic surfaces, the model considers the dynamic stability of the air/fluid interface in the asperities. Using the analytical formulations and the stability criteria, systematic studies are presented on the effects of the fractal surface parameters, cylinder radius and Reynolds number on the convective heat transfer characteristics, from which surface texture design maps are developed for maximizing the convection heat transfer. It is shown that multiscale non-wetting surfaces are most effective in the range of lower Reynolds number and small cylinder radius for achieving the best convective heat transfer and thermal hydraulic performance. Applying the models to actual non-wetting surface topographies fabricated using electrodeposition and chemical etching, it is shown that contrary to prevailing notion, superhydrophobicity, characterized by the highest contact angles, does not always lead to the maximum convective heat transfer performance, and that under certain fluid flow conditions, hydrophobic surfaces may offer a greater thermal performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Near-Field Radiative Heat Transfer Eigenmodes

The near-field electromagnetic interaction between nanoscale objects produces enhanced radiative heat transfer that can greatly surpass the limits established by far-field blackbody radiation. Here, we present a theoretical framework to describe the temporal dynamics of the radiative heat transfer in ensembles of nanostructures, which is based on the use of an eigenmode expansion of the equations that govern this process. Using this formalism, we identify the fundamental principles that determine the thermalization of collections of nanostructures, revealing general but often unintuitive dynamics. Overall, our results provide an elegant and precise approach to efficiently analyze the temporal dynamics of the near-field radiative heat transfer in systems containing a large number of nanoparticles.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Structural and Bonding Analysis in Monomeric Actinide(IV) Oxalate from Th(IV) to Pu(IV): Comparison with the An(IV) Nitrate Series

In this work, single-crystal X-ray diffraction (SC-XRD) structures and Raman spectra of a series of new isomorphous molecular An(IV)-oxalate compounds (Th, U, Np, and Pu) are reported. These complexes are crystallized with cobalt(III) hexamine ([Co(NH 3 ) 6 ] 3+ ) as the counter cations, [Co(NH 3 ) 6 ] 2 [An(C 2 O 4 ) 5 ]·4H 2 O, revealing five bidentate nonbridging oxalate ligands in the first coordination sphere (CN = 10). The nonbridging oxalate is rather uncommon for An(IV)-oxalate systems, which are widely characterized as polymeric compounds. Density functional theory (DFT) calculations were performed to examine the bonding between An(IV) cations and oxalate ligands. For comparison, we also report results obtained for the An(IV)-hexanitrate series, [(C 2 H 5 ) 4 N] 2 [An(NO 3 ) 6 ] (with An = Th, U, Np, Pu, and Ce), which consists of O-donor ligands as well but with a larger coordination number (CN = 12). The bonding analysis confirms that the actinide–oxygen bond is predominantly ionic with a minor increase in covalency from Th to U and slight variations from U to Pu. Further comparison showed that the charge transfer increases slightly when increasing the number of anions in the coordination sphere (C 2 O$_4^{2–}$: CN = 10; NO$_3^–$: CN = 12), but covalent effects as indicated by the amount of internuclear electron density accumulation are small and similar for oxalate and nitrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Proton transfer kinetics of transition metal hydride complexes and implications for fuel-forming reactions

Proton transfer reactions involving transition metal hydride complexes are prevalent in a number of catalytic fuel-forming reactions, where the proton transfer kinetics to or from the metal center can have significant impacts on the efficiency, selectivity, and stability associated with the catalytic cycle. Here, this review correlates the often slow proton transfer rate constants of transition metal hydride complexes to their electronic and structural descriptors and provides perspective on how to exploit these parameters to control proton transfer kinetics to and from the metal center. A toolbox of techniques for experimental determination of proton transfer rate constants is discussed, and case studies where proton transfer rate constant determination informs fuel-forming reactions are highlighted. Opportunities for extending proton transfer kinetic measurements to additional systems are presented, and the importance of synergizing the thermodynamics and kinetics of proton transfer involving transition metal hydride complexes is emphasized.

08 HYDROGEN↗
DOE OSTI2023

Experimental Characterization of an Additively Manufactured Inconel 718 Heat Exchanger for High-Temperature Applications

This work presents the experimental results of a novel, air-to-air, additively manufactured manifold-microchannel heat exchanger with straight fins on both sides. The heat exchanger was made of Inconel 718 using a direct metal laser sintering technique. The overall core size of the heat exchanger was 94 mm × 87.6 mm × 94.4 mm, with a fin thickness of 0.220 mm on both the hot and cold sides. The heat exchanger was tested with pressurized nitrogen gas at 300 °C and 340 kPa for the hot side, while air at an ambient condition was used for the cold side. An overall heat transfer of 276 W/m2K was obtained for Reynolds number values of 132 and 79 for the cold and hot sides, respectively. A gravimetric heat transfer density (Q/m∆T) of 4.7–6.7 W/kgK and a volumetric heat transfer density (Q/V∆T) of 6.9–9.8 kW/m3K were recorded for this heat exchanger with a coefficient of performance value that varied from 42 to 52 over the operating conditions studied here. The experimental pressure drop results were within 10% of the numerical values, while the corresponding heat transfer results were within 17% of the numerical results, mainly due to imperfections in the fabrication process. Despite this penalty, the performance of the tested heat exchanger was superior to the conventional plate-fin heat exchangers: more than 60% of improvements in both gravimetric and volumetric heat transfer densities were recorded for the entire range of experimental data.

42 ENGINEERING↗
DOE OSTI2020

Preliminary Criticality and Radiation Shielding Analysis for the Storage and Transfer of MARVEL Reactor Spent Nuclear Fuel

This report documents the results of preliminary nuclear criticality and radiation shielding assessments during transfer and dry storage of irradiated Microreactor Applications Research Validation and Evaluation (MARVEL) reactor fuel at Idaho National Laboratory (INL). The assessments focus on transfer casks and storage canisters that are currently in use at INL, which may be compatible with the irradiated MARVEL reactor fuel. The criticality assessments were performed using the radiation transport code MCNP6 with 37 MARVEL reactor fuel elements in various configurations and scenarios. All transfer and storage configurations under dry conditions were below the assumed criticality safety limit of 0.93. Some storage and transfer configurations under wet conditions exceeded the criticality safety limit. This suggests that the appropriate administrative and engineering controls, in addition to reducing the number of MARVEL reactor fuel elements per transfer cask or storage canister, can be expected to ensure criticality safety under all scenarios. The radiation shielding assessments were performed by generating conservative neutron and photon source terms using the ORIGEN module in the SCALE suite of codes. These source spectra were used to estimate the dose equivalent rates using the radiation transport code MCNP6, both on contact and 1 m away from the fuel and transfer casks. The maximum estimated dose equivalent rate of 37 unshielded MARVEL reactor fuel elements on contact is approximately 42000 R/hr. The maximum estimated dose equivalent rates on contact to the ATR transfer cask, HFEF-5 transfer cask, and high load charger were approximately 233 mR/hr, 171 mR/hr, and 201 mR/hr, respectively. This suggests that with the appropriate administrative and engineering controls, all three transfer casks analyzed can be expected to provide sufficient radiation shielding to workers during transfer of irradiated MARVEL reactor fuel. These calculations are performed to support the planning and strategy for the MARVEL project and will demonstrate the technical viability of the different configurations discussed and help identify where engineered or administrative controls may be necessary. A complete criticality safety analysis and radiation shielding analysis, including validation and contingency and accident analysis must be completed by licensed and authorized personnel before any transfer or storage of MARVEL reactor nuclear fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Microscopic Origin of Twist-Dependent Electron Transfer Rate in Bilayer Graphene

Using molecular simulation and continuum dielectric theory, we consider how electrochemical kinetics are modulated by the twist angle in bilayer graphene electrodes. By establishing a connection between the twist angle and the screening length of charge carriers within the electrode, we investigate how tunable metallicity modifies the statistics of the electron transfer energy gap. Constant potential molecular simulations show that the activation free energy for electron transfer increases with screening length, leading to a non-monotonic dependence on the twist angle. Here, the twist angle alters the density of states, tuning the number of thermally accessible channels for electron transfer and the reorganization energy by affecting the stability of the vertically excited state through attenuated image charge interactions. Understanding these effects allows us to express the Marcus rate of interfacial electron transfer as a function of the twist angle in a manner consistent with experimental observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A Lumped Stochastic Model of Coupled Neutronic Assemblies

The objective of the present work is to apply the Harris ansatz to coupled assemblies in a lumped setting, i.e., ignoring the neutron phase dependence, which hitherto has not been considered. A Master equation for the single-time joint distribution of neutron number in each assembly, accounting for transfer of neutrons from one assembly to another via leakage transition probabilities and intercept or view factors is derived from which equations for the mean and variance in each assembly are developed. Because of the neutronic coupling, it is necessary to additionally compute the correlation function between pairs of assemblies which gives an expanded set of moment equations to solve. The reactivity of each assembly is allowed to vary with time, although a formal mechanism that is responsible for reactivity coupling between assemblies is not considered or proposed. Following Harris, it is then hypothesized that the number distribution in each assembly is a gamma distribution with assembly-specific mean and variance computed exactly from the moment equations. Illustrative numerical results are presented for the moments of a system of four coupled assemblies under various reactivity and neutronic coupling scenarios. The gamma distribution is then used to compute the probability that the neutron population exceeds a threshold value in any assembly. The report concludes with a discussion of recommended further work on this problem.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Direct extracellular electron transfer for high electricity production by a new type of marine microalgae Nannochloropsis sp. HDY2

A growing number of autotrophic microalgae have been found to have extracellular electron transfer (EET) capabilities. However, the mechanism and function of EET pathway in microalgae have not thoroughly investigated. This study presents evidence of direct extracellular electron transfer (DEET) for impressive electricity production by a new type of marine microalgae Nannochloropsis sp. HDY2 in the single and double-chamber photosynthetic microbial fuel cells (PFMCs). The electricity generation of Nannochloropsis sp. is strongly inhibited by photosynthetic inhibitors, suggesting that electrons involved in the extracellular electron transfer (EET) of Nannochloropsis sp. are derived from photosynthesis. The results of dialysis bag and supernatant experiments suggest that Nannochloropsis sp. produce electricity by DEET. The lack of typical redox peaks in cyclic voltammetry (CV) analysis and the appearance of extracellular filamentous component (EFC) around cells support this finding. Under high light conditions, the chlorophyll a and carotenoid content of Nannochloropsis sp. rapidly decreased while the fatty acid synthesis and electricity generation increased, suggesting that the DEET pathway play an active role in the resistance to photooxidation of Nannochloropsis sp. In conclusion, this study provides the first evidence that Nannochloropsis has the capability of performing EET and sheds new light on the positive role of DEET on the environmental adaptation of Nannochloropsis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Origin of the isotopic composition of natural perchlorate: Experimental results for the impact of reaction pathway and initial ClO x reactant

Natural perchlorate (ClO 4 - ) exists in many places on Earth, in lunar regolith, meteorites, and on the surface of Mars. Terrestrial natural ClO 4 - has widely variable Cl and O stable isotopic compositions (δ 37 Cl, δ 18 O, Δ 17 O). The δ 18 O and Δ 17 O values of ClO 4 - from the most hyper-arid locations co-vary. ClO 4 - from less arid areas has relatively little 17 O excess and poor Δ 17 O-δ 18 O correlation. ClO 4 - from the Atacama Desert has unusually low δ 37 Cl (<-10‰) and exhibits a positive correlation between δ 37 Cl and δ 18 O, while the δ 37 Cl of ClO 4 - from all other locations varies between -5 and +7‰ with no δ 37 Cl-δ 18 O covariation. To evaluate the impact of different precursors (ClO x ) and reaction pathways on the isotopic composition of ClO 4 - , we measured the isotopic composition of ClO 4 - produced in the laboratory by UV or O 3 mediated aqueous oxidation of Cl-, OCl-, ClO2-, and ClO2° as well as O 3 mediated oxidation of dry NaCl. ClO x oxidation in aqueous or dry systems enriched in O 3 produced ClO 4 - with Δ 17 O values that generally increased with the number of O atoms required and included evidence that the site-specific 17 O anomaly in O 3 was preferentially transferred to ClO 4 - . Based on the inferred number of O atoms sourced from O 3 , and known Cl and O reaction pathways, it appears that ClO 2 ° and ClO 3 * were required intermediates in the production of ClO 4 - in the O 3 experiments. ClO x aqueous oxidation by UV irradiation produced ClO 4 - with a large range of δ 18 O values and little or no 17 O anomaly. ClO 3 - was produced to a much greater extent than ClO 4 - in all experiments except dry oxidation of NaCl by O 3 . The isotopic composition of ClO 3 - was distinct from that of ClO 4 - produced from the same initial reactants. Combined results of O 3 and UV mediated reactions largely bracketed the range of natural ClO 4 - δ 18 O and Δ 17 O values as well as δ 37 Cl values of non-Atacama natural samples, but no conditions produced the low δ 37 Cl values of Atacama ClO 4 - . Finally, our results indicate that variation in production mechanisms, possibly combined with isotopically variable precursors, could be responsible for much of the observed isotopic variation in natural ClO 4 - and ClO 3 - .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A note on thermal history kernel for unsteady heat transfer of a spherical particle

When a particle is subjected to an unsteady ambient flow, in terms of either time-dependent relative velocity or time-dependent temperature difference, the net heat transfer from the particle cannot be calculated based on the quasi-steady heat transfer correlation alone. Due to unsteady evolution of the thermal boundary layer, there is also a history contribution to heat transfer. The history contribution to heat transfer is expressed as a convolution integral of past evolution of temperature difference between the particle and the surrounding. While Basset history force and its finite Reynolds number extension have been well studied, similar understanding of unsteady heat transfer and thermal history kernel is lacking. Here, we use existing particle-resolved simulation results to develop a finite Peclet number thermal history kernel, which when used with the convolution integral is demonstrated to accurately predict unsteady heat transfer over a range of Peclet numbers and particle-to-fluid heat capacity ratio.

42 ENGINEERING↗