Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transfer curve”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Harmonic response of cylindrical and toroidal shells to an internal acoustic field. I - Theory. II - Results

In the first part of the present work concerning the coupled elastic and acoustic response of a system of cylindrical and toroidal shells enclosing an acoustic medium, the theoretical model for the cylindrical and toroidal segments' elastodynamics incorporates an elastic simulation based on transfer matrices, while the acoustic simulation adapts Green's function and curved surface elements. The coupled response is determined by the equilibrium of the acoustic pressure and internal elastic reactions of the shell, and compatibility between acoustic and elastic accelerations at the shell-fluid interface. The second part of this work obtains and discusses numerical results based on the theory for the cases of shell configurations having a plane of symmetry, as well as asymmetric ones. The inadequacy of beam theory in modeling the response of short, thin shell configurations at frequencies above the fundamental elastic resonance is demonstrated.

El-Raheb, M.↗
NASA NTRS1994

Multicolor eclipse studies of UU Aquarii. 1: Observations and system parameters

A study of the eclipses in UU Aqr from multicolor high-speed photometry is presented. A revised ephemeris for the times of minimum and an upper limit for orbital period variations are obtained. We use measurements of contact phases in the eclipse light curve to derive the binary geometry and to estimate masses and relevant dimensions. We find a mass ratio of q = 0.30 +/- 0.07 and an inclination of i = 78 deg +/- 2 deg. The masses of the component stars are M(sub 1) = 0.67 +/- 0.14 solar mass and M(sub 2) = 0.20 +/- 0.07 solar mass. Our photometric model predicts K(sub 1) = 84 +/- 26 km/s, which is approximately 30% smaller than the velocity amplitude obtained from the emission lines. From the white dwarf fluxes we estimate T(sub wd) approximately = 34,000 K and a distance of d = 270 +/- 50 pc if the inner disk is opaque. UU Aqr has long term brightness variations of approximately = 0.3 m on timescales of approximately 4 yr. The system was in a 'high' state in 1989 and 1990 and in a 'low' state in 1988 and 1992. The high state results from an increase in the brightness of the outer and cooler parts of the disk, mainly due to the appearance of a bright spot at disk rim. Based on the smooth and gradual eclipse shape and on the absence of a prominent hump in the light curve we suggest that UU Aqr is a high mass-transfer nova-like system with a relatively bright and optically thick accretion disk. We find no perceptible eclipse in the H-alpha emission line. The fluxes at mid-eclipse can be fitted by a compostion of a late-type spectrum plus an optically thin hydrogen emission-line spectrum. These evidences suggest that the emission lines are formed in an extended region only partially occulted during eclipse.

Baptista, R.↗
NASA NTRS2001

Fitting Vibrational Energy Parameters to Falloff Experiments: CH3 + CH3 + He (0.6-2 Torr 200-298 K)

There are many reported experiments and theoretical calculations for the combination of methyl free radicals diluted in a non-reactive 'deactivator. At high pressure the ethane (C2H6) combination product is the sole product; with decreasing pressure the chemically activated C2H6 will decompose. The falloff in the observed rate coefficient is the result of the competition between collisional stabilization of the chemically activated CA and unimolecular decomposition. The dependence of the rate coefficient on pressure, temperature and collision properties is complex and can not be calculated from first principles. The understanding of this system is not only of fundamental importance but is relevant to the recent detection of methyl free radicals in the atmospheres of Saturn - and Neptune. The temperatures of these outer planet atmospheres are in the 140-200 K region with total pressures (predominately H2 and He) less than 0.2 Torr. Experimentally determined rate coefficients have been reported for this reaction at T = 296-906 K and T = 200-408 K mostly with argon as the deactivator. At T = 200 K only the high pressure rate coefficient has been determined. Complete falloff curves over a wide temperature range (200-1600 K) with a variety of weak collider models used to simulate argon as the deactivator have also been reported by Klippenstein and Harding (KH). More recently we have reported the experimental rate coefficients in the falloff region with helium as the deactivator at 200 and 298 K. In this paper we have used the calculated falloff curves reported by KH for argon to determine the average energy transferred per collision for helium in our recently reported experiments. Collision rates were converted using Lennard Jones parameters; the temperature dependence of this conversion factor is noted. The helium experiments were consistent with a down of approximately 100 cm (exp-1); the temperature dependence was slight. The magnitude of down and its temperature dependence will be compared to other systems with similar substrate complexity and reaction energetics.

Tardy, Dwight C.↗
NASA NTRS2006

Bragg Curve, Biological Bragg Curve and Biological Issues in Space Radiation Protection with Shielding

The space environment consists of a varying field of radiation particles including high-energy ions, with spacecraft shielding material providing the major protection to astronauts from harmful exposure. Unlike low-LET gamma or X-rays, the presence of shielding does not always reduce the radiation risks for energetic charged particle exposure. Since the dose delivered by the charged particle increases sharply as the particle approaches the end of its range, a position known as the Bragg peak, the Bragg curve does not necessarily represent the biological damage along the particle traversal since biological effects are influenced by the track structure of both primary and secondary particles. Therefore, the biological Bragg curve is dependent on the energy and the type of the primary particle, and may vary for different biological endpoints. To achieve a Bragg curve distribution, we exposed cells to energetic heavy ions with the beam geometry parallel to a monolayer of fibroblasts. Qualitative analyses of gamma-H2AX fluorescence, a known marker of DSBs, indicated increased clustering of DNA damage before the Bragg peak, enhanced homogenous distribution at the peak, and provided visual evidence of high linear energy transfer (LET) particle traversal of cells beyond the Bragg peak. A quantitative biological response curve generated for micronuclei (MN) induction across the Bragg curve did not reveal an increased yield of MN at the location of the Bragg peak. However, the ratio of mono-to bi-nucleated cells, which indicates inhibition in cell progression, increased at the Bragg peak location. These results, along with other biological concerns, show that space radiation protection with shielding can be a complicated issue.

Honglu, Wu↗
DOE OSTI2024

Mechanistic definition and prediction of the mass exchange coefficient between rivers and hyporheic zones: The $α$ of two $Ω$s

Solute transport in interconnected rivers and hyporheic zones is typically modeled through dual-domain models where first-order solute mass transfer between the two domains, Ω R and Ω HZ , is represented by a coefficient α. The transient storage model (TSM) is an example of such an approach. In practice, α is determined by fitting the tails of solute tracer breakthrough curves using a TSM. This approach has led to ambiguity regarding α’s physical meaning and transferability. Here, in this work, we investigated the physical basis for α and tested it with virtual experiments through the fully coupled multiphysics model hyporheicFoam for the Ω R – Ω HZ system. hyporheicFoam explicitly simulated coupled flow and solute transport over a kilometer with centimeter-scale resolution. Model results were analyzed to calculate α following its theoretical definition directly. Using the determined α within a TSM enables accurate reproduction of solute transport, underscoring α’s physical relevance and precision.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

A deep learning and finite element approach for exploration of inverse structure–property designs of lightweight hybrid composites

Hybrid composites have important applications, such as high-performance and lightweight materials in aerospace and automotive industries. Hybrid composites utilize the synergy of diverse fillers to achieve desired material properties, but usually have more complicated microstructures. While topology optimization can optimize a particular property, designing hybrid composites for customized mechanical performances, e.g. full-range stress–strain curve, remains challenging. Here, a computational framework that integrated finite element analysis (FEA) and artificial intelligence (AI) methods of Conditional Generative Adversarial Networks (cGAN) deep learning and transfer learning was developed to establish inverse structure–property relationships and design tailor-made hybrid composites. Based on FEA-generated datasets of hybrid fiber-particle–matrix microstructures and their corresponding full-range stress–strain curves, a cGAN architecture was trained to generate tailored microstructures and establish structure–property relationships. Similarity in microstructural features and well-matched stress–strain curves based on the AI-generated composites were achieved. In conclusion, transfer learning was used to expand the pre-trained model for designing different materials systems.

Hybrid composites↗
DOE OSTI2023

Modelling populations of kilonovae

Abstract The 2017 detection of a kilonova coincident with gravitational-wave emission has identified neutron star mergers as the major source of the heaviest elements and dramatically constrained alternative theories of gravity. Observing a population of such sources has the potential to transform cosmology, nuclear physics, and astrophysics. However, with only one confident multi-messenger detection currently available, modelling the diversity of signals expected from such a population requires improved theoretical understanding. In particular, models that are quick to evaluate and are calibrated with more detailed multi-physics simulations are needed to design observational strategies for kilonovae detection and to obtain rapid-response interpretations of new observations. We use grey-opacity models to construct populations of kilonovae, spanning ejecta parameters predicted by numerical simulations. Our modelling focuses on wavelengths relevant for upcoming optical surveys, such as the Rubin Observatory Legacy Survey of Space and Time (LSST). In these simulations, we implement heating rates that are based on nuclear reaction network calculations. We create a Gaussian-process emulator for kilonova grey opacities, calibrated with detailed radiative transfer simulations. Using recent fits to numerical relativity simulations, we predict how the ejecta parameters from binary neutron star (BNS) mergers shape the population of kilonovae, accounting for the viewing-angle dependence. Our simulated population of BNS mergers produce peak i-band absolute magnitudes of −20 ≤ Mi ≤ −11. A comparison with detailed radiative transfer calculations indicates that further improvements are needed to accurately reproduce spectral shapes over the full light curve evolution.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1976

Multiple scattered radiation emerging from Rayleigh and continental haze layers. I - Radiance, polarization, and neutral points

The matrix operator method was used to calculate the polarization of radiation scattered on layers of various optical thicknesses, with results compared for Rayleigh scattering and for scattering from a continental haze. In both cases, there are neutral points arising from the zeros of the polarization of single scattered photons at scattering angles of zero and 180 degrees. The angular position of these Rayleigh-like neutral points (RNP) in the sky shows appreciable variation with the optical thickness of the scattering layer for a Rayleigh phase matrix, but only a small variation for haze L phase matrix. Another type of neutral point exists for non-Rayleigh phase functions that is associated with the zeros of the polarization for single scattering which occurs between the end points of the curve. A comparison of radiances calculated from the complete theory of radiative transfer using Stokes vectors with those obtained from the scalar theory shows that differences of the order of 23% may be obtained for Rayleigh scattering, while the largest difference found for a haze L phase function was of the order of 0.1%.

Kattawar, G. W.↗
NASA NTRS1949

Heat Transmission in the Boundary Layer

In the present paper which deals with the heat transfer between the gas and the wall for large temperature drops and large velocities use is made of the method of Dorodnitsyn of the introduction of a new independent variable, with this difference, however, that the relation between the temperature field (that is, density) and the velocity field in the general case considered is not assumed given but is determined from the solution of the problem. The effect of the compressibility arising from the heat transfer is thus taken into account (at the same time as the effect of the compressibility at the large velocities). A method is given for determining the coefficients of heat transfer and the friction coefficients required in many technical problems for a curved wall in a gas flow at large Mach numbers and temperature drops. The method proposed is applicable both for Prandtl number P = 1 and for P not equal to 1.

Kalikhman, L. E.↗
DOE OSTI2023

Using Vertically Aligned Carbon Nanofiber Arrays on Rigid or Flexible Substrates for Delivery of Biomolecules and Dyes to Plants

The delivery of biomolecules and impermeable dyes to intact plants is a major challenge. Nanomaterials are up-and-coming tools for the delivery of DNA to plants. As exciting as these new tools are, they have yet to be widely applied. Nanomaterials fabricated on rigid substrate (backing) are particularly difficult to successfully apply to curved plant structures. This study describes the process for microfabricating vertically aligned carbon nanofiber arrays and transferring them from a rigid to a flexible substrate. We detail and demonstrate how these fibers (on either rigid or flexible substrates) can be used for transient transformation or dye (e.g., fluorescein) delivery to plants. We show how VACNFs can be transferred from rigid silicon substrate to a flexible SU-8 epoxy substrate to form flexible VACNF arrays. Further, to overcome the hydrophobic nature of SU-8, fibers in the flexible film were coated with a thin silicon oxide layer (2-3 nm). To use these fibers for delivery to curved plant organs, we deposit a 1 µL droplet of dye or DNA solution on the fiber side of VACNF films, wait 10 min, place the films on the plant organ and employ a swab with a rolling motion to drive fibers into plant cells. With this method, we have achieved dye and DNA delivery in plant organs with curved surfaces.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Pulsed studies of intervalley transfer in Al 0.35 In 0.65 As: A paradigm for valley photovoltaics

Al 0.35 In 0.65 As is a direct semiconductor whose multivalley conduction-band structure has been proposed for use in so-called valley photovoltaics. In such hot-carrier solar cells, energetic (hot) photocarriers are stored in satellite valleys away from the Γ point, allowing them to be extracted prior to thermalization and to thereby increase power-conversion efficiency. While prior theoretical work has highlighted the potential of Al 0.35 In 0.65 As—a widely used barrier material in electronic and optoelectronic devices, for use in valley photovoltaics—surprisingly little is known about its electrical properties, especially how these are impacted by the application of high fields. In this work, we therefore undertake a detailed characterization of the electrical properties of Te-doped ($\textit{n}$-type) Al 0.35 In 0.65 As, over wide ranges of temperature (3–400 K) and electric field (<50 kV/cm). Using pulsed measurements to suppress the influence of Joule heating, we reveal the presence of clear negative-differential conductance in the current-voltage characteristics of the films, suggestive of the intervalley transfer of hot electrons. This conclusion is supported by the results of ensemble Monte Carlo simulations of the hot-carrier action, which confirm the connection of the observed negative-differential conductance to hot-electron transfer from the conduction-band (Γ) minimum, to the side valleys at the $\textit{L}$ point. Further, the quantitative features of the experimentally determined velocity-field curves are found to be in good agreement with the results of these calculations, providing further confidence in the role of the implied intervalley transfer mechanism. Overall, these results confirm the excellent potential of Al 0.35 In 0.65 As for use as the absorber material in hot-carrier solar cell technology.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Electromagnetic Signatures from the Tidal Tail of a Black Hole—Neutron Star Merger

Black hole - neutron star (BH-NS) mergers are a major target for ground-based gravitational wave observatories. A merger can also produce an electromagnetic counterpart (a kilonova) if it ejects neutron-rich matter that assembles into heavy elements through r-process nucleosynthesis. We study the kilonova signatures of the unbound dynamical ejecta of a BH-NS merger. We take as our initial state the results from a numerical relativity simulation and then use a general relativistic hydrodynamics code to study the evolution of the ejecta with parameterized r-process heating models. The unbound dynamical ejecta is initially a flattened, directed tidal tail largely confined to a plane. Heating from the r-process inflates the ejecta into a more spherical shape and smooths its small-scale structure, though the ejecta retains its bulk directed motion. We calculate the electromagnetic signatures using a 3D radiative transfer code and a parameterized opacity model for lanthanide-rich matter. The light curve varies with viewing angle because of two effects: asphericity results in brighter emission for orientations with larger projected areas, while Doppler boosting results in brighter emission for viewing angles more aligned with the direction of bulk motion. For typical r-process heating rates, the peak bolometric luminosity varies by a factor of ~3 with orientation while the peak in the optical bands varies by ~3 magnitudes. The spectrum is blueshifted at viewing angles along the bulk motion, which increases the V-band peak magnitude to ~-14 despite the lanthanide-rich composition.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Information transfer with a twist

Holographic duals for CFTs compactified on a Riemann surface Σ with a twist are cast in the language of wedge holography. Σ starts as part of the field theory geometry in the UV and becomes part of the internal space in the IR. This allows to associate entanglement entropies with splits of the internal space in the IR geometry. Decomposing the internal space in the IR and geometrizing the corresponding subsystems separately leads to two interacting gravitational systems, similar to the intermediate holographic description in braneworld models. For Σ = T 2 the setups are used to model information transfer from a black hole to a gravitating bath. This leads to Page curves with a phase structure which precisely mirrors that in braneworld models. The transition from geometric to non-geometric entropies is also discussed for Σ = S 2 as a model for more general internal spaces in AdS/CFT.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1972

Design curve for liquid helium storage vessels

Development of equipment for storage of liquid helium is discussed. Derivation of design curve and working equations for estimating effects of either perfect or imperfect heat transfer in storage device are described. Mathematical models of heat transfer conditions are provided.

Dicarlo, J. A.↗
NASA NTRS1972

Transient-forced convection film boiling on an isothermal flat plate.

Development of a new approach for the solution of transient-forced convection film boiling on an isothermal flat plate using the boundary layer model. The similarity variables are used to convert the governing partial differential equations to ordinary ones. The results of numerical solutions of these ordinary equations indicate that the transient process can be classified as one-dimensional conduction, intermediate, and the steady-state regions. The time required for the one-dimensional conduction and the time necessary to attain a steady-state condition are obtained. The use of local similarity approximations for the intermediate regime facilitates prediction of complete boundary layer growth. Using the ratio of time at any instant to the steady-state time as abscissa, the curves representing the boundary layer growth can be merged into a single mean curve within 5%. Further, the analysis shows that the average rate of heat transfer during transient is 50 to 100% higher than those at steady state. The average rate of vapor convected away is 10 to 15% lower than at steady state while the average rate of accumulation to form the vapor layer is 1 to 14 times larger.

Nagendra, H. R.↗
NASA NTRS1978

Curve tracer checks CMOS IC's

Conventional transistor curve tracer can speed up failure analysis of CMOS integrated circuits by displaying transfer characteristics while device is subjected to vibration or environmental testing. Failures that show up as change in threshold voltage or transfer characteristics are quickly detected.

Kizer, F.↗
NASA NTRS2002

Multi-mode horn

A horn has an input aperture and an output aperture, and comprises a conductive inner surface formed by rotating a curve about a central axis. The curve comprises a first arc having an input aperture end and a transition end, and a second arc having a transition end and an output aperture end. When rotated about the central axis, the first arc input aperture end forms an input aperture, and the second arc output aperture end forms an output aperture. The curve is then optimized to provide a mode conversion which maximizes the power transfer of input energy to the Gaussian mode at the output aperture.

Neilson, Jeffrey M.↗
DOE OSTI2025

Experimental investigation on heat transfer performance of drain water heat recovery heat exchangers

Water heating accounts for 18 % of residential energy consumption, and a substantial portion of this energy can be recovered through drain water heat recovery systems. Here, this paper investigates the heat transfer performance of drain water heat recovery heat exchangers. Two heat exchanger configurations were studied: vertical (gravity film exchanger) and horizontal. The heat recovery performance of the exchangers was quantified using sensible effectiveness and characteristic curves following the ε-NTU approach. Depending on the flow conditions, heat exchangers with a vertical configuration offered higher heat transfer effectiveness compared with the horizontal configuration under similar operating conditions. Furthermore, the results showed that properly designed and sized heat exchangers can effectively recover considerable amounts of waste heat from drains, depending on flow rates. Additionally, in the vertical heat exchanger configuration, low flow rates result in partially wet conditions, resulting in lower heat transfer effectiveness. Therefore, two distributor configurations are proposed to improve the heat transfer performance of vertically configured heat exchangers at low flow rates. The proposed distributor configurations and data presented in this paper will be useful in the design and development of drain water heat recovery systems in building applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗