Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “time source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Time-dependent spherically symmetric accretion onto compact X-ray sources

Analytical arguments and a numerical hydrodynamic code are used to investigate spherically symmetric accretion onto a compact object, in an attempt to provide some insight into gas flows heated by an outgoing X-ray flux. It is shown that preheating of spherically symmetric accretion flows by energetic radiation from an X-ray source results in time-dependent behavior for a much wider range of source parameters than was determined previously and that there are two distinct types of instability. The results are compared with observations of X-ray bursters and transients as well as with theories on quasars and active galactic nuclei that involve quasi-spherically symmetric accretion onto massive black holes. Models based on spherically symmetric accretion are found to be inconsistent with observations of bursters and transients.

Cowie, L. L.↗
NASA NTRS1991

Long-Term Observations of Her X-1 with BATSE

Pulsed emission from Her X-1 has been observed by BATSE during each Main High state throughout the CGRO (Compton Gamma-Ray Observatory) mission . This long observation set by a single instrument provides new information on long-term behavior of the Her X-1 system. The luminosity varies by more than a factor of 3 between different 35d cycles. Frequency and flux histories do not show a simple relationship between the source intensity and spin behavior, but do show that only spindown occurs when the source is in its lowest intensity state. Orbital analyses will be presented, including tests for consistency of the observed orbital epoch with the long-term ephemeris reported by (Deeter 1991). The intensity profile and onset times of cycles observed by both BATSE and the RXTE ASM (All Sky Monitor) will be compared. Behavior of the cycle start times versus source Main High peak intensity will be presented.

Wilson, R. B.↗
NASA NTRS2013

You Can Run, But You Can't Hide Juniper Pollen Phenology and Dispersal

Pollen can be transported great distances. Van de Water et. al., 2003 reported Juniperus spp. pollen was transported 200-600 km. Hence local observations of plant phenology may not be consistent with the timing and source of pollen collected by pollen sampling instruments. The DREAM (Dust REgional Atmospheric Model, Nickovic et al. 2001) is a verified model for atmospheric dust transport modeling using MODIS data products to identify source regions and quantities of dust. We are modified the DREAM model to incorporate pollen transport. Pollen release is estimated based on MODIS derived phenology of Juniperus spp. communities. Ground based observational records of pollen release timing and quantities are used as verification. This information will be used to support the Centers for Disease Control and Prevention's National Environmental Public Health Tracking Program and the State of New Mexico environmental public health decision support for asthma and allergies alerts.

Luvall, Jeffrey C.↗
NASA NTRS2011

Use of MODIS Satellite Images and an Atmospheric Dust Transport Model to Evaluate Juniperus spp. Pollen Phenology and Dispersal

Pollen can be transported great distances. Van de Water et. al. reported Juniperus spp. pollen was transported 200-600 km. Hence local observations of plant phenology may not be consistent with the timing and source of pollen collected by pollen sampling instruments. The DREAM (Dust REgional Atmospheric Model) is a verified model for atmospheric dust transport modeling using MODIS data products to identify source regions and quantities of dust. We are modifying the DREAM model to incorporate pollen transport. Pollen release will be estimated based on MODIS derived phenology of Juniperus spp. communities. Ground based observational records of pollen release timing and quantities will be used as verification. This information will be used to support the Centers for Disease Control and Prevention's National Environmental Public Health Tracking Program and the State of New Mexico environmental public health decision support for asthma and allergies alerts.

Luvall, J. C.↗
NASA NTRS2011

Use of MODIS Satellite Images and an Atmospheric Dust Transport Model To Evaluate Juniperus spp. Pollen Phenology and Dispersal

Pollen can be transported great distances. Van de Water et. al., 2003 reported Juniperus spp. pollen was transported 200-600 km. Hence local observations of plant phenology may not be consistent with the timing and source of pollen collected by pollen sampling instruments. The DREAM (Dust REgional Atmospheric Model, Nickovic et al. 2001) is a verified model for atmospheric dust transport modeling using MODIS data products to identify source regions and quantities of dust. We are modifying the DREAM model to incorporate pollen transport. Pollen release will be estimated based on MODIS derived phenology of Juniperus spp. communities. Ground based observational records of pollen release timing and quantities will be used as verification. This information will be used to support the Centers for Disease Control and Prevention's National Environmental Public Health Tracking Program and the State of New Mexico environmental public health decision support for asthma and allergies alerts.

Luvall, J. C.↗
NASA NTRS2012

Use of MODIS Satellite Data to Evaluate Juniperus spp. Pollen Phenology to Support a Pollen Dispersal Model, PREAM, to Support Public Health Allergy Alerts

Pollen can be transported great distances. Van de Water et. al., 2003 reported Juniperus spp. pollen was transported 200-600 km. Hence local observations of plant phenology may not be consistent with the timing and source of pollen collected by pollen sampling instruments. The DREAM (Dust REgional Atmospheric Model, Nickovic et al. 2001) is a verified model for atmospheric dust transport modeling using MODIS data products to identify source regions and concentrations of dust. We are modifying the DREAM model to incorporate pollen transport. Pollen emission is based on MODIS-derived phenology of Juniperus spp. communities. Ground-based observational records of pollen release timing and quantities will be used as model verification. This information will be used to support the Centers for Disease Control and Prevention's National Environmental Public Health Tracking Program and the State of New Mexico environmental public health decision support for asthma and allergies alerts.

Luvall, J. C.↗
NASA NTRS2013

Use of MODIS Satellite Data to Evaluate Juniperus spp. Pollen Phenology to Support a Pollen Dispersal Model, PREAM, to Support Public Health Allergy Alerts

Pollen can be transported great distances. Van de Water et. al., 2003 reported Juniperus spp. pollen was transported 200-600 km. Hence local observations of plant phenology may not be consistent with the timing and source of pollen collected by pollen sampling instruments. The DREAM (Dust REgional Atmospheric Model) is a verified model for atmospheric dust transport modeling using MODIS data products to identify source regions and concentrations of dust. We are modifying the DREAM model to incorporate pollen transport. Pollen emission is based on MODIS-derived phenology of Juniperus spp. communities. Ground-based observational records of pollen release timing and quantities will be used as model verification. This information will be used to support the Centers for Disease Control and Prevention s National Environmental Public Health Tracking Program and the State of New Mexico environmental public health decision support for asthma and allergies alerts

Luvall, J. C.↗
NASA NTRS2011

Use of MODIS Satellite Images and an Atmospheric Dust Transport Model to Evaluate Juniperus spp. Pollen Phenology and Dispersal

Pollen can be transported great distances. Van de Water et. al. reported Juniperus spp. pollen was transported 200-600 km. Hence local obse rvations of plant phenology may not be consistent with the timing and source of pollen collected by pollen sampling instruments. The DREAM (Dust REgional Atmospheric Model, Nickovic et al. 2001) is a verified model for atmospheric dust transport modeling using MODIS data produ cts to identify source regions and quantities of dust. We are modifyi ng the DREAM model to incorporate pollen transport. Pollen release wi ll be estimated based on MODIS derived phenology of Juniperus spp. communities. Ground based observations records of pollen release timing and quantities will be used as verification. This information will be used to support the Centers for Disease Control and Prevention?s Nat ional Environmental Public Health Tracking Program and the State of New Mexico environmental public health decision support for asthma and allergies alerts.

Luvall, Jeffrey C.↗
NASA NTRSDate not supplied

Global Solar Activity Data Portal for Studying 3D Dynamics and Activity of the Sun

The main problems with understanding and predicting solar activity are tightly linked to limitations in describing the global evolution of the Sun from the deep interior to the corona. Because of the complexity of interactions in a wide range of dynamical, turbulent, and spatial scales and dramatic changes in thermodynamic and magnetic field conditions, only physics-based models can provide essential background to generate reliable solar activity forecasts. However, performing accurate model calibration and estimating uncertainties is often challenging due to the unavailability of a long time series of observations. To mitigate these limitations, we have developed the Global Solar Activity (GSA) Data Portal, which enables convenient access to a variety of modern and historical data. The portal supports a dynamic visualization for 1D time series (such as the sunspot number and solar irradiance) and quick-look visualization for 2D datasets (e.g., synoptic magnetograms, the solar internal rotation, and flows). The GSA portal includes a search engine that enables data retrieval from user-specified data sources and time intervals. In this presentation, we will discuss the current and upcoming capabilities of the data portal and its potential applications for space weather studies.

SMD↗
NASA NTRS1988

On the relation between X-ray burst properties and the persistent X-ray luminosity

Published data on X-ray bursts is analyzed, assuming that the peak luminosity of X-ray bursts with radius expansion is a standard candle and that the ratio of the anisotropy factors, xi(b) and xi(p) (Sztajno et al., 1987) is the same for all burst sources. It is shown that the effective burst duration, defined as the ratio of burst fluence to maximum burst flux, is strongly anticorrelated with the persistent luminosity. A positive correlation with the persistent luminosity of the ratio of the average persistent flux to the time-averaged burst flux is found. It is concluded that, independent of the accretion rate, after a given waiting time burst sources produce bursts with approximately the same (average) energy. This suggests that continuous stable burning of a sizeable fraction of the nuclear fuel is a general phenomenon on the surface of accreting neutron stars. It is suggested that this fraction is a gradually increasing function of the accretion rate.

Van Paradijs, J.↗
NASA NTRS1993

Signal processing of jet noise from flyover test data

Narrow-band spectra characterizing jet noise are constructed from flyover acoustic measurements. Radar and c-band tracking systems provided the aircraft position histories which enabled directivity and smear angles from the aircraft to each microphone to be computed. These angles are based on source emission time and thus give some idea about the directivity of the radiated sound field due to jet noise. Simulated spectra are included in the paper to demonstrate spectral broadening due to smear angle. The acoustic data described in the study has application to community noise analysis, noise source characterization and validation of prediction models. Both broadband-shock noise and turbulent mixing noise are observed in the spectra. A detailed description of the signal processing procedures is provided.

Kelly, Jeffrey J.↗
NASA NTRS1999

F-16XL and F-18 High Speed Acoustic Flight Test Databases

This report presents the recorded acoustic data and the computed narrow-band and 1/3-octave band spectra produced by F-18 and F-16XL aircraft in subsonic flight over an acoustic array. Both broadband-shock noise and turbulent mixing noise are observed in the spectra. Radar and c-band tracking systems provided the aircraft position which enabled directivity and smear angles from the aircraft to each microphone to be computed. These angles are based on source emission time and thus give some idea about the directivity of the radiated sound field due to jet noise. A follow-on static test was also conducted where acoustic and engine data were obtained. The acoustic data described in the report has application to community noise analysis, noise source characterization and validation of prediction models. A detailed description of the signal processing procedures is provided. Follow-on static tests of each aircraft were also conducted for which engine data and far-field acoustic data are presented.

Kelly, J. J.↗
NASA NTRS1972

Cosmic-ray source and local interstellar spectra deduced from the isotopes of hydrogen and helium.

A self-consistent model for cosmic-ray hydrogen and helium propagation from the sources in the Galaxy to the orbit of earth is obtained, taking into account experimental information now available on the isotopes H-1, H-2, He-3, and He-4. The only adjustable parameters include the shape of the energy spectra of H-1 and He-4 at the time of source injection, the distribution of particle path lengths in interstellar space, and the solar modulation parameters. It is found that the allowed form of the source differential spectra of the H-1 and He-4 nuclei is dominated by a power law in total energy.

Comstock, G. M.↗
NASA NTRS2011

Integration of Dust Prediction Systems and Vegetation Phenology to Track Pollen for Asthma Alerts in Public Health

Pollen can be transported great distances. Van de Water et. al., 2003 reported Juniperus pollen, a significant aeroallergen was transported 200-600 km. Hence local observations of plant phenology may not be consistent with the timing and source of pollen collected by pollen sampling instruments. The DREAM (Dust REgional Atmospheric Model, Yin 2007) is a verified model for atmospheric dust transport modeling using MODIS data products to identify source regions and quantities of dust (Yin 2007). The use of satellite data products for studying phenology is well documented (White and Nemani 2006). We are modifying the DREAM model to incorporate pollen transport. The linkages already exist with DREAM through PHAiRS (Public Health Applications in remote Sensing) to the public health community. This linkage has the potential to fill this data gap so that health effects of pollen can better be tracked for linkage with health outcome data including asthma, respiratory effects, myocardial infarction, and lost work days. DREAM is based on the SKIRON/Eta modeling system and the Eta/NCEP regional atmospheric model. The dust modules of the entire system incorporate the state of the art parameterizations of all the major phases of the atmospheric dust life such as production, diffusion, advection, and removal. These modules also include effects of the particle size distribution on aerosol dispersion. The dust production mechanism is based on the viscous/turbulent mixing, shear-free convection diffusion, and soil moisture. In addition to these sophisticated mechanisms, very high resolution databases, including elevation, soil properties, and vegetation cover are utilized. The DREAM model was modified to use pollen sources instead of dust (PREAM). Pollen release will be estimated based on satellite-derived phenology of Juniperus spp. communities. The MODIS surface reflectance product (MOD09) will provide information on the start of the plant growing season, growth stage, peak greenness, dry-down and pollen release. Ground based observational records of pollen release timing and quantities will be used as verification. Techniques developed using MOD09 surface reflectance products will be directly applicable to the next generation sensors such as VIIRS. The resulting deterministic model for predicting and simulating pollen emission and downwind concentration to study details of phenology and meteorology and their dependencies. This information will be used to support the Centers for Disease Control and Prevention (CDC)'s National Environmental Public Health Tracking Program (EPHT) and the State of New Mexico environmental public health decision support for asthma and allergies alerts

Luvall, Jeffrey C.↗
NASA NTRSDate not supplied

RApid Blade and Blade-Vortex InTeraction (RABBIT) Reimagined: Algorithm Improvement and User-Friendly Interface Implementation

Rotorcraft noise source identification and reduction is crucial to the emergence of the Urban Air Mobility (UAM) market. One key rotor noise source is Blade Vortex Interaction (BVI), caused by the rotor blades interacting with the rotor wake. The low-fidelity RApid Blade and Blade-Vortex InTeraction (RABBIT) tool was created to predict the location and characteristics of BVI noise. RABBIT enables engineers to quickly design and simulate UAM configurations and understand BVI occurrences for a desired flight condition. Furthermore, RABBIT can also identify the time and location of blade overlap for coaxial rotors. RABBIT is not a general acoustic prediction tool, but instead utilizes vortex and wake parameters to visualize and predict BVI aerodynamics. RABBIT algorithm has been further developed including reduction of computational time, accounting for BVI source time arrival, improved vortex strength modeling, and BVI impulse factor. A user-friendly app is presented with the intent of bringing RABBIT to the masses to allow engineers from various educational backgrounds to design and begin to understand BVI. Furthermore, RABBIT capabilities are highlighted by a parameter study highlighting key parameters that impact BVIalong with highlighting RABBIT’s ability to identify BVI occurrences from other rotors.

RApid↗
NASA NTRS2002

Controlling Electron Backstreaming Phenomena Through the Use of a Transverse Magnetic Field

DEEP-SPACE mission propulsion requirements can be satisfied by the use of high specific impulse systems such as ion thrusters. For such missions. however. the ion thruster will be required to provide thrust for long periods of time. To meet the long operation time and high-propellant throughput requirements, thruster lifetime must be increased. In general, potential ion thruster failure mechanisms associated with long-duration thrusting can be grouped into four areas: (1) ion optics failure; (2) discharge cathode failure; (3) neutralizer failure; and (4) electron backstreaming caused by accelerator grid aperture enlargement brought on by accelerator grid erosion. The work presented here focuses on electron backstreaming. which occurs when the potential at the center of an accelerator grid aperture is insufficient to prevent the backflow of electrons into the ion thruster. The likelihood of this occurring depends on ion source operation time. plasma density, and grid voltages, as accelerator grid apertures enlarge as a result of erosion. Electrons that enter the gap between the high-voltage screen and accelerator grids are accelerated to the energies approximately equal to the beam voltage. This energetic electron beam (typically higher than 1 kV) can damage not only the ion source discharge cathode assembly. but also any of the discharge surfaces upstream of the ion acceleration optics that the electrons happen to impact. Indeed. past backstreaming studies have shown that near the backstreaming limit, which corresponds to the absolute value of the accelerator grid voltage below which electrons can backflow into the thruster, there is a rather sharp rise in temperature at structures such as the cathode keeper electrode. In this respect operation at accelerator grid voltages near the backstreaming limit is avoided. Generally speaking, electron backstreaming is prevented by operating the accelerator grid at a sufficiently negative voltage to ensure a sufficiently negative aperture center potential. This approach can provide the necessary margin assuming an expected aperture enlargement. Operation at very negative accelerator grid voltages, however, enhances ion charge-exchange and direct impingement erosion of the accelerator grid. The focus of the work presented here is the mitigation of electron backstreaming by the use of a magnetic field. The presence of a magnetic field oriented perpendicular to the thruster axis can significantly decrease the magnitude of the backflowing electron current by significantly reducing the electron diffusion coefficient. Negative ion sources utilize this principle to reduce the fraction of electrons in the negative ion beam. The focus of these efforts has been on the attenuation of electron current diffusing from the discharge plasma into the negative ion extraction optics by placing the transverse magnetic field upstream of the extraction electrodes. In contrast. in the case of positive ion sources such as ion thrusters, the approach taken in the work presented here is to apply the transverse field downstream of the ion extraction system so as to prevent electrons from flowing back into the source. It was found in the work presented here that the magnetic field also reduces the absolute value of the electron backstreaming limit voltage. In this respect. the applied transverse magnetic field provides two mechanisms for electron backstreaming mitigation: (1) electron current attenuation and (2) backstreaming limit voltage shift. Such a shift to less negative voltages can lead to reduced accelerator grid erosion rates.

Foster, John E.↗
NASA NTRS2008

Integration for Airborne Dust Prediction Systems and Vegetation Phenology to Track Pollen for Asthma Alerts in Public Health Decision Support Systems

The objective of the program is to assess the feasibility of combining a dust transport model with MODIS derived phenology to study pollen transport for integration with a public health decision support system. The use of pollen information has specifically be identified as a critical need by the New Mexico State Health department for inclusion in the Environmental Public Health Tracking (EPHT) program. Material and methods: Pollen can be transported great distances. Local observations of plan phenology may be consistent with the timing and source of pollen collected by pollen sampling instruments. The Dust REgional Atmospheric Model (DREAM) is an integrated modeling system designed to accurately describe the dust cycle in the atmosphere. The dust modules of the entire system incorporate the state of the art parameterization of all the major phases of the atmospheric dust life such as production, diffusion, advection, and removal. These modules also include effects of the particles size distribution on aerosol dispersion. The model was modified to use pollen sources instead of dust. Pollen release was estimated based on satellite-derived phenology of key plan species and vegetation communities. The MODIS surface reflectance product (MOD09) provided information on the start of the plant growing season, growth stage, and pollen release. The resulting deterministic model is useful for predicting and simulating pollen emission and downwind concentration to study details of phenology and meteorology and their dependencies. The proposed linkage in this project provided critical information on the location timing and modeled transport of pollen directly to the EPHT> This information is useful to support the centers for disease control and prevention (CDC)'s National EPHT and the state of New Mexico environmental public health decision support for asthma and allergies alerts.

Luvall, J. C.↗